All MIBs › HH3C-HGMP-MIB
Organization: Hangzhou H3C Tech. Co., Ltd.
Last Updated: 2005-12-06
Category: Device Management, Technology: Stacking, Vendor: H3C/HH3C
Description: Manages H3C Group Management Protocol (HGMP) for cluster-based device discovery and unified management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is HH3C-HGMP-MIB?
HH3C-HGMP-MIB is an H3C (Huawei-3Com) enterprise MIB implementing HGMP (the HUAWEI/H3C Group Management Protocol), used to discover and manage clusters of LAN switches as a single logical unit from one management device. It exposes configuration and status of cluster membership, roles (management device versus member device), and related cluster topology/discovery data. Its monitoring value centers on the software status of the cluster feature: administrators check whether member switches remain part of the cluster and reachable through the management device, which reveals topology or connectivity problems within the managed group. It is a proprietary H3C protocol MIB, not derived from an IETF cluster-management standard. Deployment context is H3C campus/access-layer switch deployments where multiple switches are administered collectively through HGMP clustering to simplify management. Engineers can download the HH3C-HGMP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-HGMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- H3C (Huawei-3Com) LAN switch cluster
Monitoring Examples
No sample object names were provided for this module; in general terms an admin would poll cluster membership and role status on the management device to confirm all expected member switches are still part of the cluster and reachable, with a missing or unreachable member flagging a topology or connectivity problem.
What Can Be Monitored
- cluster membership status
- member device role
- cluster topology/discovery state
- management device connectivity to members
This MIB depends on
Related MIBs
Imported Objects
From HH3C-OID-MIB
| hh3cRhw | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION |
How to Use in IPNetwork Monitor
Example using hh3cNDPChange OID:
Select an H3C LAN switch cluster (HGMP Group Management Protocol) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cNDPChange into the Find box to locate it in the OID tree, then select it and click OK. It reports the change identifier of the Neighbor table. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hh3cHgmp | 1.3.6.1.4.1.25506.8.7 | This MIB contains objects to manage the hh3chgmp operations, which are used on lanswitch products. | ||
| hh3cClusterObject | 1.3.6.1.4.1.25506.8.7.1 | This MIB contains objects to manage the cluster operations, which are used on lanswitch products. | ||
| hh3chgmpEventsV2 | 1.3.6.1.4.1.25506.8.7.1.0 | Definition point for cluster notifications. | ||
| NTF hh3chgmpMemberfailure | 1.3.6.1.4.1.25506.8.7.1.0.1 | When a cluster member failure, send a snmp trap to the network management. | ||
| NTF hh3chgmpMemberRecover | 1.3.6.1.4.1.25506.8.7.1.0.2 | When a cluster member recover, send a snmp trap to the network management. | ||
| NTF hh3chgmpMemberStatusChange | 1.3.6.1.4.1.25506.8.7.1.0.3 | When a cluster member status change, send a snmp trap to the network management. | ||
| NTF hh3chgmpNetTopChange | 1.3.6.1.4.1.25506.8.7.1.0.4 | When net topology of this cluster change, send a snmp trap to the network management. | ||
| INT hh3chgmpSetVLANSecurity | 1.3.6.1.4.1.25506.8.7.1.1 | INTEGER | read-write | Configure whether to perform the VLAN check inside the cluster. |
| I32 hh3chgmpHandShakeInterval | 1.3.6.1.4.1.25506.8.7.1.2 | Integer32 | read-write | Handshaking interval of the cluster member switches. |
| I32 hh3chgmpHandShakeHoldtime | 1.3.6.1.4.1.25506.8.7.1.3 | Integer32 | read-write | Holdtime of administrator switch and member switch in the cluster. |
| I32 hh3chgmpGrpMemberTableChange | 1.3.6.1.4.1.25506.8.7.1.4 | Integer32 | read-only | Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more. |
| I32 hh3chgmpMemberDisconRate | 1.3.6.1.4.1.25506.8.7.1.5 | Integer32 | read-only | Disconnection times of the member and administrator switches divided by member number times 1000. |
| INT hh3chgmpCmdLanswitchFlag | 1.3.6.1.4.1.25506.8.7.1.6 | INTEGER | read-write | Administrator switch flag |
| OCT hh3chgmpCmdClusterName | 1.3.6.1.4.1.25506.8.7.1.7 | OCTET STRING | read-write | Cluster name of the administrator switch |
| IP hh3chgmpMngPriIpSegCMIP | 1.3.6.1.4.1.25506.8.7.1.8 | IpAddress | read-write | The private management IP address of the administrator switch, which can not be modified after the cluster has been created. |
| IP hh3chgmpMngPriIpMask | 1.3.6.1.4.1.25506.8.7.1.9 | IpAddress | read-write | The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created. |
| IP hh3chgmpFtpServer | 1.3.6.1.4.1.25506.8.7.1.10 | IpAddress | read-write | The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. |
| IP hh3chgmpTftpServer | 1.3.6.1.4.1.25506.8.7.1.11 | IpAddress | read-write | The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch. |
| IP hh3chgmpSnmpHost | 1.3.6.1.4.1.25506.8.7.1.12 | IpAddress | read-write | The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch. |
| IP hh3chgmpLogHost | 1.3.6.1.4.1.25506.8.7.1.13 | IpAddress | read-write | Log host of the cluster, which can only be configured and accessed on the administrator switch. |
| hh3chgmpGrpMemberTable | 1.3.6.1.4.1.25506.8.7.1.14 | not-accessible | Table of cluster member switches | |
| hh3chgmpGrpMemberEntry | 1.3.6.1.4.1.25506.8.7.1.14.1 | not-accessible | ||
| OCT hh3chgmpGrpMemberDeviceId | 1.3.6.1.4.1.25506.8.7.1.14.1.1 | OCTET STRING | read-only | 4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number. |
| I32 hh3chgmpGrpMemberSerial | 1.3.6.1.4.1.25506.8.7.1.14.1.2 | Integer32 | read-only | When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. |
| IP hh3chgmpGrpMemberIpAddr | 1.3.6.1.4.1.25506.8.7.1.14.1.3 | IpAddress | read-only | The private IP addresses of the member switches for the communication inside the cluster. |
| OCT hh3chgmpGrpMemberName | 1.3.6.1.4.1.25506.8.7.1.14.1.4 | OCTET STRING | read-only | Hostname of the member switch |
| OCT hh3chgmpGrpMemberPassword | 1.3.6.1.4.1.25506.8.7.1.14.1.5 | OCTET STRING | read-write | Member password for joining a cluster |
| OCT hh3chgmpGrpMemberPlatform | 1.3.6.1.4.1.25506.8.7.1.14.1.6 | OCTET STRING | read-only | Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. |
| INT hh3chgmpGrpMemberStatus | 1.3.6.1.4.1.25506.8.7.1.14.1.7 | INTEGER | read-only | Member status on the administrator switch, use for displaying the network management status. |
| I32 hh3chgmpGrpMemberDisconCount | 1.3.6.1.4.1.25506.8.7.1.14.1.8 | Integer32 | read-only | Count of inside communication disconnection between the member switch and the administrator switch. |
| I32 hh3chgmpGrpMemberEnrollTime | 1.3.6.1.4.1.25506.8.7.1.14.1.9 | Integer32 | read-only | Enrollment time of the member, measured in seconds. |
| ROW hh3chgmpGrpMemberOperate | 1.3.6.1.4.1.25506.8.7.1.14.1.10 | RowStatus | read-write | Operation indication field, indicates the operation of adding/removing a member by the network management agent. |
| hh3chgmpMemberResetTable | 1.3.6.1.4.1.25506.8.7.1.15 | not-accessible | Reset a member switch in the cluster. | |
| hh3chgmpMemberResetEntry | 1.3.6.1.4.1.25506.8.7.1.15.1 | not-accessible | ||
| OCT hh3chgmpMemberResetMAC | 1.3.6.1.4.1.25506.8.7.1.15.1.1 | OCTET STRING | read-only | The management MAC address of the switch to be reset, which is the unique identifier of the switch. |
| INT hh3chgmpMemberEraseflash | 1.3.6.1.4.1.25506.8.7.1.15.1.2 | INTEGER | read-write | Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned. |
| INT hh3chgmpClusterRole | 1.3.6.1.4.1.25506.8.7.1.16 | INTEGER | read-only | This switch's role in cluster. |
| INT hh3chgmpClusterMaxPoolNum | 1.3.6.1.4.1.25506.8.7.1.17 | INTEGER | read-only | Max switch members that the cluster can support(include administrator switch). |
| OCT hh3chgmpClusterCmdSwMac | 1.3.6.1.4.1.25506.8.7.1.18 | OCTET STRING | read-only | The MAC address of administrator switch. It will be filled with zero when not be a member of cluster. |
| INT hh3chgmpRun | 1.3.6.1.4.1.25506.8.7.1.19 | INTEGER | read-write | Enable cluster on this switch. |
| hh3chgmpProtocolMac | 1.3.6.1.4.1.25506.8.7.1.22 | |||
| MAC hh3chgmpClusterProtocolMac | 1.3.6.1.4.1.25506.8.7.1.22.1 | MacAddress | read-write | Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC. |
| hh3chgmpTopologyManagement | 1.3.6.1.4.1.25506.8.7.1.23 | |||
| hh3chgmpWhitelistTable | 1.3.6.1.4.1.25506.8.7.1.23.1 | not-accessible | Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure. | |
| hh3chgmpWhitelistEntry | 1.3.6.1.4.1.25506.8.7.1.23.1.1 | not-accessible | Entry items | |
| OCT hh3chgmpWhitelistDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.1.1.1 | OCTET STRING | not-accessible | Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. |
| I32 hh3chgmpWhitelistSerial | 1.3.6.1.4.1.25506.8.7.1.23.1.1.2 | Integer32 | read-only | When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object. |
| ROW hh3chgmpWhitelistRowStatus | 1.3.6.1.4.1.25506.8.7.1.23.1.1.3 | RowStatus | read-create | The row status of this table. |
| hh3chgmpWhitelistNbTable | 1.3.6.1.4.1.25506.8.7.1.23.2 | not-accessible | Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology. | |
| hh3chgmpWhitelistNbEntry | 1.3.6.1.4.1.25506.8.7.1.23.2.1 | not-accessible | Entry items | |
| I32 hh3chgmpWhitelistNbIndex | 1.3.6.1.4.1.25506.8.7.1.23.2.1.1 | Integer32 | not-accessible | Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'. |
| OCT hh3chgmpWhitelistNbDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.2.1.2 | OCTET STRING | read-only | Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. |
| OCT hh3chgmpWhitelistPortName | 1.3.6.1.4.1.25506.8.7.1.23.2.1.3 | OCTET STRING | read-only | The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'. |
| OCT hh3chgmpWhitelistNbPortName | 1.3.6.1.4.1.25506.8.7.1.23.2.1.4 | OCTET STRING | read-only | The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'. |
| hh3chgmpBlacklistTable | 1.3.6.1.4.1.25506.8.7.1.23.3 | not-accessible | Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster. | |
| hh3chgmpBlacklistEntry | 1.3.6.1.4.1.25506.8.7.1.23.3.1 | not-accessible | Entry items | |
| OCT hh3chgmpBlacklistDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.3.1.1 | OCTET STRING | not-accessible | Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. |
| OCT hh3chgmpBlacklistAccessDeviceId | 1.3.6.1.4.1.25506.8.7.1.23.3.1.2 | OCTET STRING | read-only | Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'. |
| OCT hh3chgmpBlacklistAccessPortName | 1.3.6.1.4.1.25506.8.7.1.23.3.1.3 | OCTET STRING | read-only | The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object. |
| ROW hh3chgmpBlacklistRowStatus | 1.3.6.1.4.1.25506.8.7.1.23.3.1.4 | RowStatus | read-create | The row status of this table. |
| hh3chgmpMemberPriPortTable | 1.3.6.1.4.1.25506.8.7.1.24 | not-accessible | This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address. | |
| hh3chgmpMemberPriPortEntry | 1.3.6.1.4.1.25506.8.7.1.24.1 | not-accessible | Information about a specified member private port entry. The indexes of the entry are hh3chgmpGrpMemberDevId and hh3chgmpMemberPriPortProto, which indicate entries in the table. | |
| OCT hh3chgmpMemberDevId | 1.3.6.1.4.1.25506.8.7.1.24.1.1 | OCTET STRING | read-only | Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. |
| U32 hh3chgmpMemberPriPortProto | 1.3.6.1.4.1.25506.8.7.1.24.1.2 | Unsigned32 | not-accessible | The index of this table. Each instance value of this object corresponds to a different protocol. |
| STR hh3chgmpMemberPriPortProtoDescr | 1.3.6.1.4.1.25506.8.7.1.24.1.3 | DisplayString | read-only | It describes the hh3chgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hh3chgmpMemberPriPortProtocol value is 1. |
| U32 hh3chgmpMemberPriPortNum | 1.3.6.1.4.1.25506.8.7.1.24.1.4 | Unsigned32 | read-only | The private port number of member switch, used by specified hh3chgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hh3chgmpGrpMemberIpAddr. |
| hh3cStackObject | 1.3.6.1.4.1.25506.8.7.2 | This MIB contains objects to manage the stack operations, which is used on lanswitch products. | ||
| hh3chgmpStackEventsV2 | 1.3.6.1.4.1.25506.8.7.2.0 | Definition point for Stack notifications. | ||
| NTF hh3chgmpStackMemberfailure | 1.3.6.1.4.1.25506.8.7.2.0.1 | When a stack member failure, send a snmp trap to the network management. | ||
| NTF hh3chgmpStackMemberRecover | 1.3.6.1.4.1.25506.8.7.2.0.2 | When a stack member Recover, send a snmp trap to the network management. | ||
| NTF hh3chgmpStackMemberStatusChange | 1.3.6.1.4.1.25506.8.7.2.0.3 | When a stack member status change, send a snmp trap to the network management. | ||
| I32 hh3chgmpStackMemberTableChange | 1.3.6.1.4.1.25506.8.7.2.1 | Integer32 | read-only | Change identifier of the stack member table. |
| I32 hh3chgmpStackMemberDisconRate | 1.3.6.1.4.1.25506.8.7.2.2 | Integer32 | read-only | Disconnection rate of the stack member switches. |
| INT hh3chgmpMainLanswitchFlag | 1.3.6.1.4.1.25506.8.7.2.3 | INTEGER | read-write | The status of the local switch in the stack. |
| IP hh3chgmpStackIpPoolStartIP | 1.3.6.1.4.1.25506.8.7.2.4 | IpAddress | read-write | The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| INT hh3chgmpStackIpPoolLength | 1.3.6.1.4.1.25506.8.7.2.5 | INTEGER | read-write | The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| hh3chgmpStackMemberTable | 1.3.6.1.4.1.25506.8.7.2.6 | not-accessible | Stack member table. | |
| hh3chgmpStackMemberEntry | 1.3.6.1.4.1.25506.8.7.2.6.1 | not-accessible | ||
| OCT hh3chgmpStackMemberDeviceId | 1.3.6.1.4.1.25506.8.7.2.6.1.1 | OCTET STRING | read-only | 2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string. |
| I32 hh3chgmpStackMemberSerial | 1.3.6.1.4.1.25506.8.7.2.6.1.2 | Integer32 | read-only | When adding a member switch to the stack, the master switch will assign an unique integer to identify it. |
| IP hh3chgmpStackMemberIpAddr | 1.3.6.1.4.1.25506.8.7.2.6.1.3 | IpAddress | read-only | The private member IP address for the communication inside the stack. |
| OCT hh3chgmpStackMemberName | 1.3.6.1.4.1.25506.8.7.2.6.1.4 | OCTET STRING | read-only | Hostname of the member switch. |
| OCT hh3chgmpStackMemberPassword | 1.3.6.1.4.1.25506.8.7.2.6.1.5 | OCTET STRING | read-only | Member password for joining a stack. |
| OCT hh3chgmpStackMemberPlatform | 1.3.6.1.4.1.25506.8.7.2.6.1.6 | OCTET STRING | read-only | Set the hardware platform. A null string indicates the information does not exist in the device adjacency table. |
| INT hh3chgmpStackMemberStatus | 1.3.6.1.4.1.25506.8.7.2.6.1.7 | INTEGER | read-only | Member status on the master switch, use for displaying the network management status. |
| I32 hh3chgmpStackMemberDisconCount | 1.3.6.1.4.1.25506.8.7.2.6.1.8 | Integer32 | read-only | Count of inside communication disconnection between the member switch and the master switch. |
| I32 hh3chgmpStackMemberEnrollTime | 1.3.6.1.4.1.25506.8.7.2.6.1.9 | Integer32 | read-only | Enrollment time of the member, measured in seconds. |
| INT hh3chgmpStackRole | 1.3.6.1.4.1.25506.8.7.2.7 | INTEGER | read-only | This switch's role status in stack. |
| INT hh3chgmpStackMaxPoolNum | 1.3.6.1.4.1.25506.8.7.2.8 | INTEGER | read-only | Max switch members in one stack that the switch support (include main switch). |
| OCT hh3chgmpStackMainSwMac | 1.3.6.1.4.1.25506.8.7.2.9 | OCTET STRING | read-only | The MAC address of main switch. It will be 00.00.00 when not be a member of stack. |
| IP hh3chgmpStackIpPoolMask | 1.3.6.1.4.1.25506.8.7.2.10 | IpAddress | read-write | The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. |
| hh3cNTDPObject | 1.3.6.1.4.1.25506.8.7.4 | This MIB contains objects to manage the ntdp operations, which are used on lanswitch products. | ||
| I32 hh3chgmpNTDPCollectTopTime | 1.3.6.1.4.1.25506.8.7.4.1 | Integer32 | read-write | Topology collection interval of the administrator switch of the cluster, measured in minutes. |
| I32 hh3chgmpNTDPHopRange | 1.3.6.1.4.1.25506.8.7.4.2 | Integer32 | read-write | Range of the topology collection of the administrator switch |
| INT hh3chgmpNTDPRun | 1.3.6.1.4.1.25506.8.7.4.3 | INTEGER | read-write | Enable/Disable the NTDP function on the switch. |
| I32 hh3chgmpNTDPPortDelay | 1.3.6.1.4.1.25506.8.7.4.4 | Integer32 | read-write | Set the delay to forward the topology request via the ports, measured in milliseconds. |
| I32 hh3chgmpNTDPHopDelay | 1.3.6.1.4.1.25506.8.7.4.5 | Integer32 | read-write | Set the delay to forward the topology request from every hop, measured in milliseconds. |
| I32 hh3chgmpNTDPLastTopCollectDuration | 1.3.6.1.4.1.25506.8.7.4.6 | Integer32 | read-only | Duration of the latest overall topology collection, a performance count measured in seconds. |
| I32 hh3chgmpNTDPCacheChange | 1.3.6.1.4.1.25506.8.7.4.7 | Integer32 | read-only | Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. |
| I32 hh3chgmpNTDPTOPTableChange | 1.3.6.1.4.1.25506.8.7.4.8 | Integer32 | read-only | Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. |
| hh3chgmpNTDPInterfaceTable | 1.3.6.1.4.1.25506.8.7.4.9 | not-accessible | Enable/Disable the NTDP on the switch port. | |
| hh3chgmpNTDPInterfaceEntry | 1.3.6.1.4.1.25506.8.7.4.9.1 | not-accessible | ||
| I32 hh3chgmpNTDPInterfaceIfIndex | 1.3.6.1.4.1.25506.8.7.4.9.1.1 | Integer32 | read-only | Unique identifier an interface of the device. |
| INT hh3chgmpNTDPInterfaceEnable | 1.3.6.1.4.1.25506.8.7.4.9.1.2 | INTEGER | read-write | If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false. |
| hh3chgmpNTDPCacheTable | 1.3.6.1.4.1.25506.8.7.4.10 | not-accessible | Access the information about the switch from the topology table. | |
| hh3chgmpNTDPCacheEntry | 1.3.6.1.4.1.25506.8.7.4.10.1 | not-accessible | ||
| I32 hh3chgmpNTDPCacheHashIndex | 1.3.6.1.4.1.25506.8.7.4.10.1.1 | Integer32 | read-only | Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range. |
| OCT hh3chgmpNTDPCacheDeviceID | 1.3.6.1.4.1.25506.8.7.4.10.1.2 | OCTET STRING | read-only | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| OCT hh3chgmpNTDPCacheClusterName | 1.3.6.1.4.1.25506.8.7.4.10.1.3 | OCTET STRING | read-only | Name of the cluster including the device. |
| INT hh3chgmpNTDPCacheClusterRole | 1.3.6.1.4.1.25506.8.7.4.10.1.4 | INTEGER | read-only | Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11). |
| INT hh3chgmpNTDPCacheCapabilities | 1.3.6.1.4.1.25506.8.7.4.10.1.5 | INTEGER | read-only | The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet. |
| OCT hh3chgmpNTDPCacheVersion | 1.3.6.1.4.1.25506.8.7.4.10.1.6 | OCTET STRING | read-only | The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet. |
| OCT hh3chgmpNTDPCachePlatform | 1.3.6.1.4.1.25506.8.7.4.10.1.7 | OCTET STRING | read-only | Hardware platform. A null string indicates that the field was not included in the latest NTDP packet. |
| INT hh3chgmpNTDPCacheMngVLAN | 1.3.6.1.4.1.25506.8.7.4.10.1.8 | INTEGER | read-only | The management VLAN ID of the device. |
| INT hh3chgmpNTDPCacheHop | 1.3.6.1.4.1.25506.8.7.4.10.1.9 | INTEGER | read-only | Hops to this switch. |
| hh3chgmpNTDPTopTable | 1.3.6.1.4.1.25506.8.7.4.11 | not-accessible | Access the topology structure collected by the NTDP. | |
| hh3chgmpNTDPTopEntry | 1.3.6.1.4.1.25506.8.7.4.11.1 | not-accessible | ||
| I32 hh3chgmpNTDPTopHashIndex | 1.3.6.1.4.1.25506.8.7.4.11.1.1 | Integer32 | read-only | Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range. |
| OCT hh3chgmpNTDPTopEdgeStartDevID | 1.3.6.1.4.1.25506.8.7.4.11.1.2 | OCTET STRING | read-only | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| I32 hh3chgmpNTDPTopEdgeIndex | 1.3.6.1.4.1.25506.8.7.4.11.1.3 | Integer32 | read-only | Edge index of this entry in the data structure. |
| OCT hh3chgmpNTDPTopEdgeEndDevID | 1.3.6.1.4.1.25506.8.7.4.11.1.4 | OCTET STRING | read-only | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| OCT hh3chgmpNTDPTopEdgeStartPort | 1.3.6.1.4.1.25506.8.7.4.11.1.5 | OCTET STRING | read-only | The number of the first port of a topology edge. Interface type + card number / slot number / sequence number. |
| INT hh3chgmpNTDPTopEdgeStartPortFullDuplex | 1.3.6.1.4.1.25506.8.7.4.11.1.6 | INTEGER | read-only | The full-duplex status of the first port on a topology edge. |
| I32 hh3chgmpNTDPTopEdgeStartPortSpeed | 1.3.6.1.4.1.25506.8.7.4.11.1.7 | Integer32 | read-only | The speed of the first port on a topology edge. |
| OCT hh3chgmpNTDPTopEdgeEndPort | 1.3.6.1.4.1.25506.8.7.4.11.1.8 | OCTET STRING | read-only | The number of the last port of a topology edge. Interface type + card number / slot number / sequence number. |
| INT hh3chgmpNTDPTopLinkStatus | 1.3.6.1.4.1.25506.8.7.4.11.1.11 | INTEGER | read-only | In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'. |
| hh3cNDPObject | 1.3.6.1.4.1.25506.8.7.5 | This MIB contains objects to manage the ndp operations, which are used on lanswitch products. | ||
| INT hh3cNDPStatus | 1.3.6.1.4.1.25506.8.7.5.1 | INTEGER | read-write | NDP protocol module enable flag |
| I32 hh3cNDPHelloTimer | 1.3.6.1.4.1.25506.8.7.5.2 | Integer32 | read-write | NDP packet transmission interval, measured in seconds. |
| I32 hh3cNDPAgingTime | 1.3.6.1.4.1.25506.8.7.5.3 | Integer32 | read-write | How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. |
| C32 hh3cNDPChangeEx | 1.3.6.1.4.1.25506.8.7.5.4 | Counter32 | read-only | Change identifier of the Neighbor table |
| hh3cNDPPortTable | 1.3.6.1.4.1.25506.8.7.5.5 | not-accessible | Configure to enable/disable the interface NDP of the switch. | |
| hh3cNDPPortEntry | 1.3.6.1.4.1.25506.8.7.5.5.1 | not-accessible | ||
| I32 hh3cNDPIfIndex | 1.3.6.1.4.1.25506.8.7.5.5.1.1 | Integer32 | read-only | Unique identifier of an interface of the device. |
| INT hh3cNDPPortStatus | 1.3.6.1.4.1.25506.8.7.5.5.1.2 | INTEGER | read-write | If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false. |
| hh3cNDPPortNbTable | 1.3.6.1.4.1.25506.8.7.5.6 | not-accessible | NDP neighbor information on the switch. | |
| hh3cNDPPortNbEntry | 1.3.6.1.4.1.25506.8.7.5.6.1 | not-accessible | ||
| OCT hh3cNDPPortNbDeviceId | 1.3.6.1.4.1.25506.8.7.5.6.1.1 | OCTET STRING | read-only | 2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number. |
| OCT hh3cNDPPortNbPortName | 1.3.6.1.4.1.25506.8.7.5.6.1.2 | OCTET STRING | read-only | Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number. |
| OCT hh3cNDPPortNbDeviceName | 1.3.6.1.4.1.25506.8.7.5.6.1.3 | OCTET STRING | read-only | Device name. A null string indicates that the field was not included in the latest NDP packet. |
| INT hh3cNDPPortNbPortMode | 1.3.6.1.4.1.25506.8.7.5.6.1.4 | INTEGER | read-only | The neighbor port duplex mode. |
| OCT hh3cNDPPortNbProductVer | 1.3.6.1.4.1.25506.8.7.5.6.1.5 | OCTET STRING | read-only | Product version. A null string indicates that the field was not included in the latest NDP packet. |
| OCT hh3cNDPPortNbHardVer | 1.3.6.1.4.1.25506.8.7.5.6.1.6 | OCTET STRING | read-only | Hardware version. A null string indicates that the field was not included in the latest NDP packet. |
| OCT hh3cNDPPortNbBootromVer | 1.3.6.1.4.1.25506.8.7.5.6.1.7 | OCTET STRING | read-only | Bootrom version. A null string indicates that the field was not included in the latest NDP packet. |
| OCT hh3cNDPPortNbSoftVer | 1.3.6.1.4.1.25506.8.7.5.6.1.8 | OCTET STRING | read-only | Software version. A null string indicates that the field was not included in the latest NDP packet. |
| I32 hh3cNDPPortNbAgingtime | 1.3.6.1.4.1.25506.8.7.5.6.1.9 | Integer32 | read-only | How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds. |
RFC description
Manages H3C LAN switch cluster and HGMP operations including topology discovery, port grouping, and cluster protocol configuration.
Start monitoring H3C LAN switch cluster (HGMP Group Management Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.