HH3C-LswIGSP-MIB

All MIBs › HH3C-LswIGSP-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2001-06-29

Category: Technology: Multicast, Vendor: H3C/HH3C

Description: Manages IGMP snooping multicast group membership and port filtering on H3C Layer 2 switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-LswIGSP-MIB?

HH3C-LswIGSP-MIB is an H3C (Hangzhou H3C Technologies) private MIB that manages IGMP snooping on H3C Layer 2 switches, controlling how multicast group membership is learned and pruned per port and VLAN. Global objects (hh3cIgmpSnoopingStatus, hh3cIgmpSnoopingRouterPortAge, hh3cIgmpSnoopingResponseTime, hh3cIgmpSnoopingHostTime) configure snooping and aging behavior, while hh3cIgmpSnoopingGroupLimitTable and hh3cIgmpSnoopingFastLeaveTable set per-interface group-count caps and fast-leave behavior. hh3cIgmpSnoopingGroupPolicyTable applies ACL-based group-filtering policy per interface/VLAN pair, and hh3cIgmpSnoopingVlanStatusTable toggles snooping per VLAN. A statistics subtree (hh3cRecvIGMPGQueryNum, hh3cRecvIGMPSQueryNum, hh3cRecvIGMPV1ReportNum/V2ReportNum, hh3cRecvIGMPLeaveNum, hh3cRecvErrorIGMPPacketNum, hh3cSentIGMPSQueryNum) counts IGMP protocol packets seen and sent by the switch, giving visibility into multicast control-plane health. It is deployed on H3C switches carrying IPTV or other multicast traffic, alongside standard bridge and VLAN MIBs, for HH3C-LswIGSP-MIB MIB based multicast-snooping diagnostics.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-LswIGSP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Layer 2 switches

Monitoring Examples

An operator polls hh3cRecvErrorIGMPPacketNum and hh3cRecvIGMPLeaveNum over time to check for malformed IGMP traffic or unusually frequent group leaves on a switch, and checks hh3cIgmpSnoopingGroupLimitNumber against actual group counts; a rising error-packet counter combined with a group count pinned at its configured limit would indicate a misbehaving multicast source or a limit that needs raising.

What Can Be Monitored

IGMP snooping global enable/aging settings
per-interface group-count limit
fast-leave status per interface
group filtering policy per VLAN
per-VLAN snooping enable state
IGMP query/report/leave/error packet counters

Imported Objects

From HH3C-OID-MIB

hh3clswCommon

OBJECT-IDENTITY

From IF-MIB

InterfaceIndex

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cLswIgmpsnoopingMib	1.3.6.1.4.1.25506.8.35.7
hh3cLswIgmpsnoopingMibObject	1.3.6.1.4.1.25506.8.35.7.1
ENA hh3cIgmpSnoopingStatus	1.3.6.1.4.1.25506.8.35.7.1.1	EnabledStatus	read-write	Configure to enable IGMP Snooping.
INT hh3cIgmpSnoopingRouterPortAge	1.3.6.1.4.1.25506.8.35.7.1.2	INTEGER	read-write	Configure the aging time of the router port.
INT hh3cIgmpSnoopingResponseTime	1.3.6.1.4.1.25506.8.35.7.1.3	INTEGER	read-write	Configure the maximum query response time.
INT hh3cIgmpSnoopingHostTime	1.3.6.1.4.1.25506.8.35.7.1.4	INTEGER	read-write	Configure the aging time of the multicast group port.
hh3cIgmpSnoopingGroupLimitTable	1.3.6.1.4.1.25506.8.35.7.1.5		not-accessible	The table lists the maximum group number that one interface could do IGMP Snooping.
hh3cIgmpSnoopingGroupLimitEntry	1.3.6.1.4.1.25506.8.35.7.1.5.1		not-accessible	An entry (conceptual row) representing the maximum group number on an interface which IGMP Snooping operation is enabled.
NUM hh3cIgmpSnoopingGroupIfIndex	1.3.6.1.4.1.25506.8.35.7.1.5.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP snooping is enabled.
U32 hh3cIgmpSnoopingGroupLimitNumber	1.3.6.1.4.1.25506.8.35.7.1.5.1.2	Unsigned32	read-write	The maxmum group number of IGMP Snooping on a port.
hh3cIgmpSnoopingFastLeaveTable	1.3.6.1.4.1.25506.8.35.7.1.6		not-accessible	The table specifies the fast leave status on those ports that do IGMP Snooping.
hh3cIgmpSnoopingFastLeaveEntry	1.3.6.1.4.1.25506.8.35.7.1.6.1		not-accessible	An entry specifies the fast leave status on those ports that do IGMP Snooping.
NUM hh3cIgmpSnoopingFastLeaveIfIndex	1.3.6.1.4.1.25506.8.35.7.1.6.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP snooping is enabled.
ENA hh3cIgmpSnoopingFastLeaveStatus	1.3.6.1.4.1.25506.8.35.7.1.6.1.2	EnabledStatus	read-write	The fast leave status of the port on which IGMP Snooping is enabled.
hh3cIgmpSnoopingGroupPolicyTable	1.3.6.1.4.1.25506.8.35.7.1.7		not-accessible	This is a table specifies the group policy parameter and Vlan ID of the IGMP Snooping port.
hh3cIgmpSnoopingGroupPolicyEntry	1.3.6.1.4.1.25506.8.35.7.1.7.1		not-accessible	An entry representing the group policy parameter and Vlan ID of a port on which IGMP Snooping operation is enabled.
NUM hh3cIgmpSnoopingGroupPolicyIfIndex	1.3.6.1.4.1.25506.8.35.7.1.7.1.1	InterfaceIndex	not-accessible	The ifIndex value of the port on which IGMP Snooping is enabled.
I32 hh3cIgmpSnoopingGroupPolicyVlanID	1.3.6.1.4.1.25506.8.35.7.1.7.1.2	Integer32	not-accessible	The Vlan ID which the IGMP Snooping port is attached to.
I32 hh3cIgmpSnoopingGroupPolicyParameter	1.3.6.1.4.1.25506.8.35.7.1.7.1.3	Integer32	read-create	The ACL Number which is used as the group policy parameter of the IGMP Snooping port.
ROW hh3cIgmpSnoopingGroupPolicyStatus	1.3.6.1.4.1.25506.8.35.7.1.7.1.4	RowStatus	read-create	This object is used to create or delete a row and represent the current status of this row. Now support three state:CreateAndGo,Active,Destroy.
ENA hh3cIgmpSnoopingNonFloodingStatus	1.3.6.1.4.1.25506.8.35.7.1.8	EnabledStatus	read-write	Configure to disable multicast flooding when no member exists in the destinated group. To use this function,IGMP snooping must be enabled.
hh3cIgmpSnoopingVlanStatusTable	1.3.6.1.4.1.25506.8.35.7.1.9		not-accessible	The table used to enable or disable IGMP snooping on the specified VLAN.
hh3cIgmpSnoopingVlanStatusEntry	1.3.6.1.4.1.25506.8.35.7.1.9.1		not-accessible	An entry representing the IGMP snooping status on the specified VLAN.
I32 hh3cIgmpSnoopingVlanID	1.3.6.1.4.1.25506.8.35.7.1.9.1.1	Integer32	not-accessible	An index uniquely identifies on which VLAN IGMP snooping is enabled or disabled.
ENA hh3cIgmpSnoopingVlanEnabled	1.3.6.1.4.1.25506.8.35.7.1.9.1.2	EnabledStatus	read-write	Indicating whether IGMP snooping is enabled on this VLAN.
hh3cIgmpSnoopingStatsObjects	1.3.6.1.4.1.25506.8.35.7.1.10
C32 hh3cRecvIGMPGQueryNum	1.3.6.1.4.1.25506.8.35.7.1.10.1	Counter32	read-only	The statistics of IGMP general query packets received on the device.
C32 hh3cRecvIGMPSQueryNum	1.3.6.1.4.1.25506.8.35.7.1.10.2	Counter32	read-only	The statistics of IGMP specific query packets received on the device.
C32 hh3cRecvIGMPV1ReportNum	1.3.6.1.4.1.25506.8.35.7.1.10.3	Counter32	read-only	The statistics of IGMP V1 report packets received on the device.
C32 hh3cRecvIGMPV2ReportNum	1.3.6.1.4.1.25506.8.35.7.1.10.4	Counter32	read-only	The statistics of IGMP V2 report packets received on the device.
C32 hh3cRecvIGMPLeaveNum	1.3.6.1.4.1.25506.8.35.7.1.10.5	Counter32	read-only	The statistics of IGMP leave packets received on the device.
C32 hh3cRecvErrorIGMPPacketNum	1.3.6.1.4.1.25506.8.35.7.1.10.6	Counter32	read-only	The statistics of error IGMP packets received on the device.
C32 hh3cSentIGMPSQueryNum	1.3.6.1.4.1.25506.8.35.7.1.10.7	Counter32	read-only	The statistics of IGMP specific query packets sent from the device.
INT hh3cIgmpSnoopingClearStats	1.3.6.1.4.1.25506.8.35.7.1.10.8	INTEGER	read-write	The configuration to clear the statistics of IGMP packets.

RFC description

H3C LAN switch IGMP snooping MIB for multicast group management and fast leave control.

Start monitoring H3C Layer 2 switch (IGMP snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-LswIGSP-MIB

What Is HH3C-LswIGSP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description