HPN-ICF-EVI-MIB

All MIBs › HPN-ICF-EVI-MIB

Last Updated: 2013-04-28

Category: Vendor: H3C/HH3C, Vendor: HP/HPE

Description: Manages Ethernet Virtual Interconnect (EVI) wide-area Layer 2 extension tunnels on HP/Comware devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HPN-ICF-EVI-MIB?

HPN-ICF-EVI-MIB is an HP Networking (Comware/H3C) vendor MIB for managing Ethernet Virtual Interconnect (EVI), a technology that extends Layer 2 VLANs across a Layer 3 wide-area network by tunneling Ethernet frames between geographically separated sites. It exposes site identification, designated VLAN configuration, per-interface extended-VLAN mappings, and source-to-destination VLAN mapping tables that define how local VLANs are stitched to remote sites through the EVI tunnel. As a monitoring target this MIB is mainly configuration-state oriented, but its notifications and VLAN-mapping tables let an operator confirm that the intended Layer 2 extension topology (which local VLANs map to which remote sites) is correctly and currently provisioned, catching misconfigurations that would otherwise cause traffic to fail to traverse the WAN tunnel. It builds on standard VLAN and interface concepts (dot1Q-style VLAN indexing) though it is not a direct extension of a single named IETF MIB. It is deployed on HP/Comware core or data-center-interconnect routers/switches used to stretch Layer 2 domains between geographically distinct data centers. Engineers can download the HPN-ICF-EVI-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HPN-ICF-EVI-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

HP/H3C Comware core switch
HP/H3C Comware data-center-interconnect device

Monitoring Examples

An administrator would query hpnicfEviIfExtendVlanTable (via hpnicfEviIfExtendVlanIndex and hpnicfEviIfExtendVlanLAV) to confirm which VLANs are being extended over a given EVI interface, and check hpnicfEviIfExtendVlanRowStatus to verify the extension entry is active. The hpnicfEviIfVlanMappingTable, keyed by hpnicfEviIfVlanMappingSiteId with hpnicfEviIfVlanMappingSrc/hpnicfEviIfVlanMappingDst, would be polled to confirm that a local VLAN is correctly mapped to the expected VLAN ID at a remote hpnicfEviSiteID, revealing a misconfigured or dropped mapping if traffic between sites is failing. hpnicfEviNotifications would alert on changes to these mappings or site connectivity events.

What Can Be Monitored

EVI site ID
designated VLAN
per-interface extended VLAN list
VLAN mapping row status
source-to-destination VLAN mapping per site

Imported Objects

From HPN-ICF-OID-MIB

hpnicfCommon

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From ISIS-MIB

IsisSystemID

From Q-BRIDGE-MIB

VlanId

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using hpnicfEviMacLocalMacs OID:

Select an HP/H3C Comware core/data-center-interconnect switch (Ethernet Virtual Interconnect) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hpnicfEviMacLocalMacs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of local MACs. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hpnicfEvi	1.3.6.1.4.1.11.2.14.11.15.2.132			This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).
hpnicfEviNotifications	1.3.6.1.4.1.11.2.14.11.15.2.132.0
NTF hpnicfEviNewDed	1.3.6.1.4.1.11.2.14.11.15.2.132.0.1			Notifies that a new DED has been elected.
NTF hpnicfEviSiteEDTopoChange	1.3.6.1.4.1.11.2.14.11.15.2.132.0.2			Notifies that the EVI network topology has changed.
NTF hpnicfEviEDLinkDisconnect	1.3.6.1.4.1.11.2.14.11.15.2.132.0.3			Notifies that all the EVI links on a tunnel are down.
hpnicfEviObjects	1.3.6.1.4.1.11.2.14.11.15.2.132.1
hpnicfEviBase	1.3.6.1.4.1.11.2.14.11.15.2.132.1.1
VLA hpnicfEviDesignatedVlan	1.3.6.1.4.1.11.2.14.11.15.2.132.1.1.1	VlanId	read-write	The designated VLAN is used for edge devices on a multihomed site to exchange EVI IS-IS hello packets for DED election and extended-VLAN assignment.
I32 hpnicfEviSiteID	1.3.6.1.4.1.11.2.14.11.15.2.132.1.1.2	Integer32	read-write	Site ID. The edge devices in the same site must have the same site ID.
hpnicfEviIf	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2
hpnicfEviIfExtendVlanTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1		not-accessible	A table that contains extended VLAN entries. A site extends extended VLANs to remote sites over an EVI tunnel.
hpnicfEviIfExtendVlanEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1		not-accessible	Detailed information about each extended VLAN.
VLA hpnicfEviIfExtendVlanIndex	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.1	VlanId	not-accessible	Each VLAN index specifies a VLAN ID in the range of 1 to 4094.
T/F hpnicfEviIfExtendVlanLAV	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.2	TruthValue	read-only	Local Active VLANs (LAVs), which are active VLANs on the EVI tunnel interface. The interface can extend only active VLANs to remote sites.
ROW hpnicfEviIfExtendVlanRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.1.1.3	RowStatus	read-create	Entry status.
hpnicfEviIfVlanMappingTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2		not-accessible	VLAN mapping table on the interface.
hpnicfEviIfVlanMappingEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1		not-accessible	Detailed information about each VLAN mapping.
I32 hpnicfEviIfVlanMappingSiteId	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.1	Integer32	not-accessible	Site ID of the interface on which the VLAN mapping is configured. If '0' is specified, the operation applies to all sites.
VLA hpnicfEviIfVlanMappingSrc	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.2	VlanId	not-accessible	Local VLAN ID in the mapping.
VLA hpnicfEviIfVlanMappingDst	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.3	VlanId	not-accessible	Remote VLAN ID in the mapping.
ROW hpnicfEviIfVlanMappingRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.2.1.4	RowStatus	read-create	Entry status.
hpnicfEviIfAttributeTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3		not-accessible	A table that contains EVI tunnel attribute entries.
hpnicfEviIfAttributeEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1		not-accessible	Detailed information about the attributes of each EVI tunnel.
T/F hpnicfEviIfFloodingMode	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.1	TruthValue	read-write	State of the EVI flooding function. The function is enabled if the value is set to true.
T/F hpnicfEviIfARPSuppression	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.3.1.2	TruthValue	read-write	State of the ARP flooding suppression function. The function is enabled if the value is set to true.
hpnicfEviIfFloodingMacTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4		not-accessible	A table that contains MAC addresses configured for selective flooding.
hpnicfEviIfFloodingMacEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1		not-accessible	Detailed information about each MAC address used for EVI selective flooding.
MAC hpnicfEviIfFloodingMacAddress	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.1	MacAddress	not-accessible	MAC address used for EVI selective flooding.
VLA hpnicfEviIfFloodMacVlanIndex	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.2	VlanId	not-accessible	The VLAN that contains the MAC address.
ROW hpnicfEviIfFloodingMacRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.2.4.1.3	RowStatus	read-create	State of the MAC address entry. You can use this object to create or delete entries. Deleting entries does not delete this object.
hpnicfEviMac	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3
hpnicfEviMacCountTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1		not-accessible	EVI MAC statistics table. The table contains MAC entry counts sorted by MAC address types, including local MACs, local MAC conflicts, remote MACs, and remote MAC conflicts.
hpnicfEviMacCountEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1		not-accessible	EVI MAC entry counts.
C32 hpnicfEviMacLocalMacsEx	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.1	Counter32	read-only	Number of local MACs.
C32 hpnicfEviMacLocalConflicts	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.2	Counter32	read-only	Number of local MACs that conflict with remote MACs.
C32 hpnicfEviMacRemoteMacs	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.3	Counter32	read-only	Number of remote MACs received from remote edge devices.
C32 hpnicfEviMacRemoteConflicts	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.1.1.4	Counter32	read-only	Number of remote MACs that conflict with local MACs.
hpnicfEviMacLocalTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2		not-accessible	MAC address table that only contains MAC addresses at the site.
hpnicfEviMacLocalEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1		not-accessible	Detailed informaiton about each local MAC entry.
VLA hpnicfEviMacLocalVlan	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.1	VlanId	not-accessible	VLANs that contain the local MACs.
MAC hpnicfEviMacLocalMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.2	MacAddress	not-accessible	Local MAC addresses.
HPN hpnicfEviMacLocalMacType	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.3	HpnicfEviMacType	read-only	MAC address types, including: dynamic MACs, static MACs, and flood MACs (MACs configured for selective flooding).
T/F hpnicfEviMacLocalConflict	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.4	TruthValue	read-only	Whether the MAC conflicts with any remote MAC.
T/F hpnicfEviMacLocalFiltered	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.2.1.5	TruthValue	read-only	Whether the MAC is filtered.
hpnicfEviMacRemoteTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3		not-accessible	A table contains MAC addresses received from remote edge devices.
hpnicfEviMacRemoteEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1		not-accessible	Detailed information about each remote MAC.
VLA hpnicfEviMacRemoteVlan	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.1	VlanId	not-accessible	VLANs that contain remote MAC addresses.
MAC hpnicfEviMacRemoteMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.2	MacAddress	not-accessible	Remote MAC address.
T/F hpnicfEviMacRemoteMacEffect	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.3	TruthValue	read-only	Whether the MAC can be used for forwarding traffic.
T/F hpnicfEviMacRemoteConflict	1.3.6.1.4.1.11.2.14.11.15.2.132.1.3.3.1.4	TruthValue	read-only	The remote MAC conflicts with a local MAC.
hpnicfEviProcess	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4
hpnicfEviProcessPolicyTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1		not-accessible	A table that contains routing policy information for each EVI IS-IS process.
hpnicfEviProcessPolicyEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1		not-accessible	Detailed information about the routing policy for each EVI IS-IS process.
U32 hpnicfEviProcessId	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.1	Unsigned32	accessible-for-notify	EVI IS-IS process ID.
STR hpnicfEviProcessPolicy	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.1.1.2	DisplayString	read-write	Routing policy for the EVI IS-IS process.
hpnicfEviProcessGrTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2		not-accessible	A table that contains graceful restart (GR) information.
hpnicfEviProcessGrEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1		not-accessible	Detailed GR information for each EVI IS-IS process.
T/F hpnicfEviProcessGrEnable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.1	TruthValue	read-write	Whether the GR function is enabled.
U32 hpnicfEviProcessGrInterval	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.2.1.2	Unsigned32	read-write	EVI IS-IS GR interval in the range of 30 to 1800, in seconds.
hpnicfEviProcessVSysTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3		not-accessible	A table that contains virtual system entries. Virtual systems are associated with EVI IS-IS processes.
hpnicfEviProcessVSysEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1		not-accessible	Detailed information about each vitual system.
ISI hpnicfEviVirtualSysId	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.1	IsisSystemID	not-accessible	Virtual system ID in hexadecimal notation. The virtual system ID must be unique in the EVI network.
ROW hpnicfEviVirtualSysRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.4.3.1.2	RowStatus	read-create	Entry status.
hpnicfEviISIS	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5
hpnicfEviISISNbrSummaryTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1		not-accessible	EVI neighbor statistics table.
hpnicfEviISISNbrSummaryEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1		not-accessible	EVI neighbor statistics table entries. The entries contain the EVI neighbor summary for each EVI IS-IS process.
U32 hpnicfEviISISNbrMaxMultiHomes	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.1	Unsigned32	read-only	The maximum number of edge devices that the site can contain.
U32 hpnicfEviISISNbrSiteNbrs	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.2	Unsigned32	read-only	The count of neighbors that belong to the same site.
U32 hpnicfEviISISNbrLinkNbrs	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.1.1.3	Unsigned32	read-only	The count of neighbors that are in remote sites.
hpnicfEviISISNbrTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2		not-accessible	A table that contains generic information about all neighbors.
hpnicfEviISISNbrEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1		not-accessible	Detailed information about each neighbor of the edge device.
ISI hpnicfEviISISNbrSysId	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.1	IsisSystemID	accessible-for-notify	System ID of the neighbor.
MAC hpnicfEviISISNbrMacAddr	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.2	MacAddress	read-only	MAC address of the neighbor.
I32 hpnicfEviISISNbrSiteId	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.3	Integer32	read-only	Site ID of the neighbor.
T/F hpnicfEviISISNbrTransStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.5.2.1.4	TruthValue	read-only	State of EVI transport-facing links.
hpnicfEviEnable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.6
hpnicfEviEnableTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1		not-accessible	A table that contains all EVI-enabled neighboring ports of the edge device.
hpnicfEviEnableEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1		not-accessible	Detailed information about each EVI-enabled port in the EVI network.
T/F hpnicfEviEnableStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.6.1.1.1	TruthValue	read-write	End station service disable (trunk port) bit. When this bit is set (true), all native frames received on the port and all native frames that would have been sent on the port are discarded. The value of this object MUST be retained across reinitializations of the management system.
hpnicfEviNbr	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7
hpnicfEviNbrBaseTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1		not-accessible	A table that contains basic information about the EVI Neighbor Discovery Protocol (ENDP).
hpnicfEviNbrBaseEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1		not-accessible	Detailed information about ENDP for each EVI tunnel.
T/F hpnicfEviNbrSelfServerStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.1	TruthValue	read-write	If the value is set to true, the EVI neighbor discovery server (ENDS) is enabled. When you enable ENDS on an EVI tunnel interface, an EVI neighbor discovery client (ENDC) on the EVI tunnel interface is also enabled automatically, with the source address of the EVI tunnel as the server address.
OCT hpnicfEviNbrAuthPassword	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.2	OCTET STRING	read-write	ENDP authentication key. It is a zero-length string when being read.
I32 hpnicfEviNbrClientRegisterInterval	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.1.1.3	Integer32	read-write	Interval at which the ENDCs on an EVI tunnel interface update their registration with their ENDSs.
hpnicfEviNbrRemoteServerTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2		not-accessible	A table that contains basic information about the remote ENDSs.
hpnicfEviNbrRemoteServerEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1		not-accessible	Detailed information about each remote ENDS. When you set the address of a remote ENDS on an EVI tunnel interface, an ENDC is enabled automatically on the EVI tunnel interface.
IPt hpnicfEviNbrRemoteServerType	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.1	InetAddressType	not-accessible	Address type of the remote ENDS, including ipv4 and ipv6.
IP hpnicfEviNbrRemoteServer	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.2	InetAddress	not-accessible	Address of the remote ENDS. The address type is specified by the hpnicfEviNbrRemoteServerType object. Address length (4 or 16 bytes) must be consistent with the address type.
ROW hpnicfEviNbrRemoteServerRowStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.2.1.3	RowStatus	read-create	Entry status. This object is used to create or delete entries. Deleting entries does not delete this object.
hpnicfEviNbrTable	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3		not-accessible	A table that contains basic information about neighbors discovered with ENDP.
hpnicfEviNbrEntry	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1		not-accessible	Detailed information about each EVI neighbor.
IPt hpnicfEviNbrAddressType	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.1	InetAddressType	not-accessible	Address type of the neighbor, including ipv4 and ipv6.
IP hpnicfEviNbrAddress	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.2	InetAddress	not-accessible	Address of the neighbor. The address type is specified by the hpnicfEviNbrAddressType object. Address length (4 or 16 bytes) must be consistent with the address type.
MAC hpnicfEviNbrSystemID	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.3	MacAddress	read-only	System ID of the neighbor.
I32 hpnicfEviNbrExpireTime	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.4	Integer32	read-only	Expiration time of the neighbor.
HPN hpnicfEviNbrStatus	1.3.6.1.4.1.11.2.14.11.15.2.132.1.7.3.1.5	HpnicfEviNeighborStatus	read-only	State of the neighbor.

RFC description

Manages Ethernet Virtual Interconnect (EVI) for edge switches with MAC learning and VLAN support.

Start monitoring HP/H3C Comware core/data-center-interconnect switch (Ethernet Virtual Interconnect) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HPN-ICF-EVI-MIB