HH3C-FLOWTEMPLATE-MIB

All MIBs › HH3C-FLOWTEMPLATE-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2005-11-24

Category: Network Monitoring (RMON), Technology: NetFlow, Vendor: H3C/HH3C

Description: Manages flow templates for traffic sampling and export configuration on H3C NetFlow-capable devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-FLOWTEMPLATE-MIB?

HH3C-FLOWTEMPLATE-MIB is an H3C enterprise MIB for managing flow templates used in traffic sampling and export (NetFlow/NetStream-style) configuration on H3C devices, defining which fields (e.g., source/destination IP, ports, protocol) are collected and exported for flow-based traffic analysis. It is a configuration-oriented MIB rather than a live-counter MIB, exposing template definitions and their field compositions. Its monitoring relevance is primarily about confirming the software/feature configuration state, verifying that the correct flow template is applied so that traffic visibility/analytics tools receive properly formatted flow records, rather than direct hardware sensors. It complements standard NetFlow/IPFIX-related MIBs and vendor flow-export features present on the same platform. Typical deployment is on H3C routers/switches performing traffic sampling and export to a flow collector for network traffic analysis. Engineers can download the HH3C-FLOWTEMPLATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-FLOWTEMPLATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C router/switch with NetFlow/NetStream flow export

Monitoring Examples

No specific objects were sampled for this MIB, so exact identifiers can't be cited, but consistent with its purpose an operator would check which flow template (and its field set) is bound to an interface's flow-export configuration, to confirm exported records include the fields (e.g., source/destination address, ports) that a flow collector expects. A mismatch here would explain incomplete or malformed flow records reaching the NetFlow collector.

What Can Be Monitored

flow template definitions
flow template field composition
template-to-interface binding

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From RFC1213-MIB

ifIndex

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

MacAddress
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cFlowTemplate	1.3.6.1.4.1.25506.2.64			H3C flow template management information base.
hh3cFlowTemplateMibObject	1.3.6.1.4.1.25506.2.64.1
hh3cFTConfigGroup	1.3.6.1.4.1.25506.2.64.1.1
I32 hh3cFTGroupNextIndex	1.3.6.1.4.1.25506.2.64.1.1.1	Integer32	read-only	This object contains an appropriate value to be used for hh3cFTGroupIndex when creating rows in the hh3cFTGroupTable. If it is 2147483647, it denotes that hh3cFTGroupTable can't create any instance.
hh3cFTGroupTable	1.3.6.1.4.1.25506.2.64.1.1.2		not-accessible	A table of flow template group. A flow template group, which is applied to interface, must use hh3cFTGroupTable to create a instance and hh3cFTBasicGroupTable or hh3cFTExtendGroupTable to configure flow template's need item. A basic flow template must use hh3cFTBasicGroupTable to configure some basic flow template's need item, such as: address, protocol, priority. A extend flow template must use hh3cFTExtendGroupTable to configure packet's type and offset and length.
hh3cFTGroupEntry	1.3.6.1.4.1.25506.2.64.1.1.2.1		not-accessible	Flow template group information.
I32 hh3cFTGroupIndex	1.3.6.1.4.1.25506.2.64.1.1.2.1.1	Integer32	not-accessible	Flow template group index.
OCT hh3cFTGroupName	1.3.6.1.4.1.25506.2.64.1.1.2.1.2	OCTET STRING	read-create	Flow template group name.
INT hh3cFTGroupType	1.3.6.1.4.1.25506.2.64.1.1.2.1.3	INTEGER	read-create	Type of flow template.
ROW hh3cFTGroupRowStatus	1.3.6.1.4.1.25506.2.64.1.1.2.1.4	RowStatus	read-create	RowStatus.
hh3cFTBasicGroupTable	1.3.6.1.4.1.25506.2.64.1.1.3		not-accessible	A table of basic flow template group.
hh3cFTBasicGroupEntry	1.3.6.1.4.1.25506.2.64.1.1.3.1		not-accessible	Basic flow template group information.
BIT hh3cFTBasicGroupAddressType	1.3.6.1.4.1.25506.2.64.1.1.3.1.1	Bits	read-create	Type of MAC and IP address. This is a bit-map of possible conditions. The various bit positions are: sourceIpv4Address source IPv4's address destIPv4Address destination IPv4's address sourceIPv6Address source IPv6 address destIPv6Address destination IPv6 address sourceMacAddress source MAC address destMacAddress destination MAC address
BIT hh3cFTBasicGroupPriorityType	1.3.6.1.4.1.25506.2.64.1.1.3.1.2	Bits	read-create	Type of priority. This is a bit-map of possible conditions. The various bit positions are: vlanID VlanID cos 802.1p priority topVlanID VlanID of top layer topCos 802.1p priority of top layer fragment fragment tcpFlag TCP flag tos type of service dscp DSCP ipprecedence IP precedence
BIT hh3cFTBasicGroupProtocolType	1.3.6.1.4.1.25506.2.64.1.1.3.1.3	Bits	read-create	Type of protocol. This is a bit-map of possible conditions. The various bit positions are: l2Potocol layer 2 protocol ipv4L3Protocol layer 3 protocol of IPv4 ipv6L3Protocol layer 3 protocol of IPv6 icmpProtocolType Type of ICMP protocol of IPv4 icmpProtocolCode Code of ICMP protocol of IPv4 icmpv6ProtocolType Type of ICMP protocol of IPv6 icmpv6ProtocolCode Code of ICMP protocol of IPv6 sourceL4Port port of layer 4 of source destL4Port port of layer 4 of destination
MAC hh3cFTBasicGroupSMacWildCard	1.3.6.1.4.1.25506.2.64.1.1.3.1.4	MacAddress	read-create	Source MAC address field in Ethernet packet head.
MAC hh3cFTBasicGroupDMacWildCard	1.3.6.1.4.1.25506.2.64.1.1.3.1.5	MacAddress	read-create	Destination MAC address field in Ethernet packet head.
ROW hh3cFTBasicGroupRowStatus	1.3.6.1.4.1.25506.2.64.1.1.3.1.6	RowStatus	read-create	RowStatus.
hh3cFTExtendGroupTable	1.3.6.1.4.1.25506.2.64.1.1.4		not-accessible	A table of extend flow template group information.
hh3cFTExtendGroupEntry	1.3.6.1.4.1.25506.2.64.1.1.4.1		not-accessible	Extend flow template group information entry.
INT hh3cFTExtendGroupOffsetType	1.3.6.1.4.1.25506.2.64.1.1.4.1.1	INTEGER	not-accessible	Offset type of the packet. start Offset from the start of the packet mpls Offset from the head of MPLS l2 Offset from the head of the L2 frame l4 Offset from the head of L4 packet l5 Offset from the head of the L5 packet ipv4 Offset from the head of the IPv4 packet ipv6 Offset from the head of the IPv6 packet
I32 hh3cFTExtendGroupOffsetMaxValue	1.3.6.1.4.1.25506.2.64.1.1.4.1.2	Integer32	read-create	The max value of offset.
I32 hh3cFTExtendGroupLengthMaxValue	1.3.6.1.4.1.25506.2.64.1.1.4.1.3	Integer32	read-create	The max value of length.
ROW hh3cFTExtendGroupRowStatus	1.3.6.1.4.1.25506.2.64.1.1.4.1.4	RowStatus	read-create	RowStatus.
hh3cFTApplyGroup	1.3.6.1.4.1.25506.2.64.1.2
hh3cFTIfApplyTable	1.3.6.1.4.1.25506.2.64.1.2.1		not-accessible	A table of any interface with flowtemplate. A flow template, which will be applied interface, is an instance at hh3cFTGroupTable and hh3cFTBasicGroupTable or hh3cFTExtendGroupTable. A basic flow template is an instance at hh3cFTGroupTable and hh3cFTBasicGroupTable, and the instance's RowStatus must be 'active' at each table. A extend flow template is an instance at hh3cFTGroupTable and hh3cFTExtendGroupTable, and the instance's RowStatus must be 'active' at each table.
hh3cFTIfApplyEntry	1.3.6.1.4.1.25506.2.64.1.2.1.1		not-accessible	Any interface with flowtemplate information.
OCT hh3cFTIfApplyGroupName	1.3.6.1.4.1.25506.2.64.1.2.1.1.1	OCTET STRING	read-only	The name of flow template.
ROW hh3cFTIfApplyRowStatus	1.3.6.1.4.1.25506.2.64.1.2.1.1.2	RowStatus	read-create	RowStatus.

RFC description

H3C flow template management for packet classification including basic and extended flow template configuration.

Start monitoring H3C router/switch (NetFlow/NetStream flow template config) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-FLOWTEMPLATE-MIB

What Is HH3C-FLOWTEMPLATE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description