HH3C-CUPM-CP-MIB

All MIBs › HH3C-CUPM-CP-MIB

Organization: New H3C Technologies Co., Ltd.

Last Updated: 2020-09-11

Category: Vendor: H3C/HH3C

Description: Manages the Control Plane of H3C Cloud Unified Platform Management, covering resource allocation and policy distribution.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is HH3C-CUPM-CP-MIB?

HH3C-CUPM-CP-MIB is an H3C (Hangzhou Huawei-3Com/New H3C) enterprise MIB covering the Control Plane (CP) of the Cloud Unified Platform Management system, used in H3C's data-center and cloud-networking fabric products. It exposes configuration data for virtual network overlays, including VXLAN bridge domains, source/destination address bindings, VPN name associations, and per-VXLAN state, as well as a list/table of Underlay Points (UPs) participating in the control plane. Its monitoring value is largely in confirming the software-defined overlay configuration and operational state -- for instance whether a given VXLAN binding (hh3cCupmCpVbVxlanState) is up, which reflects the health of the control-plane's overlay provisioning rather than raw hardware sensors -- and it defines its own notification objects for control-plane events. It is deployed as part of the broader H3C CUPM MIB family alongside data-plane and forwarding MIBs it coordinates with. Typical deployment context is H3C SDN/cloud fabric controllers and switches managing VXLAN-based virtual networks. Engineers can download the HH3C-CUPM-CP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in HH3C-CUPM-CP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Cloud Unified Platform Management (CUPM) switches and controllers
H3C SDN/data-center fabric devices

Monitoring Examples

An administrator would poll hh3cCupmCpVbUpID and hh3cCupmCpVbVxlanID together with hh3cCupmCpVbVxlanState to confirm a given VXLAN binding is active and correctly mapped to its hh3cCupmCpVbSrcAddr/hh3cCupmCpVbDestAddr endpoints and hh3cCupmCpVbVpnName. Cross-checking hh3cCupmUpListTable (via hh3cCupmUpListEntry, indexed by hh3cCupmUpID) against hh3cCupmUpNum would reveal whether an expected underlay point has dropped out of the control plane's tracked list, indicating a control-plane synchronization fault; hh3cCupmCpNotifications would then be the trap channel alerting operators to such state changes.

What Can Be Monitored

VXLAN binding state
VXLAN source/destination address
VPN name association
underlay point (UP) list and count
control-plane notification events

Imported Objects

From HH3C-OID-MIB

hh3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

RowStatus

How to Use in IPNetwork Monitor

Example using hh3cCupmCpProtoTnlState OID:

Select an H3C SDN/data-center fabric switch/controller (CUPM control plane, VXLAN overlay) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type hh3cCupmCpProtoTnlState into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The state of VXLAN protocol tunnel. 0 (unknown) The VXLAN protocol tunnel is in unknown state. 1 (up) The VXLAN protocol tunnel is in connected state. 2 (down) The VXLAN protocol tunnel is in disconnected state. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'up', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
hh3cCupmCp	1.3.6.1.4.1.25506.2.194			This MIB provides config information of CP(Control Plane).
hh3cCupmCpNotifications	1.3.6.1.4.1.25506.2.194.0
NTF hh3cCupmCpProtoTnlUp	1.3.6.1.4.1.25506.2.194.0.1			The notification is generated when CP device connects to VXLAN tunnel.
NTF hh3cCupmCpProtoTnlDown	1.3.6.1.4.1.25506.2.194.0.2			The notification is generated when CP device disconnects to VXLAN tunnel.
hh3cCupmCpNotifyVarObjects	1.3.6.1.4.1.25506.2.194.1
I32 hh3cCupmCpVbUpID	1.3.6.1.4.1.25506.2.194.1.1	Integer32	accessible-for-notify	The number of UP device.
I32 hh3cCupmCpVbVxlanID	1.3.6.1.4.1.25506.2.194.1.2	Integer32	accessible-for-notify	Part of the index for this table, this value identifies the VXLAN protocol tunnel.
IPt hh3cCupmCpVbSrcAddrType	1.3.6.1.4.1.25506.2.194.1.3	InetAddressType	accessible-for-notify	Specifies the type of local address to be used at a remote host for connecting VXLAN protocol tunnel.
IP hh3cCupmCpVbSrcAddr	1.3.6.1.4.1.25506.2.194.1.4	InetAddress	accessible-for-notify	Specifies the local address to be used at a remote host for connecting VXLAN protocol tunnel. The host address type is determined by the object value of corresponding hh3cCupmCpProtoTnlSrcAddrType.
IPt hh3cCupmCpVbDestAddrType	1.3.6.1.4.1.25506.2.194.1.5	InetAddressType	accessible-for-notify	Specifies the type of remote host for connecting the VXLAN protocol tunnel.
IP hh3cCupmCpVbDestAddr	1.3.6.1.4.1.25506.2.194.1.6	InetAddress	accessible-for-notify	Specifies the remote host for connecting the VXLAN protocol tunnel.
OCT hh3cCupmCpVbVpnName	1.3.6.1.4.1.25506.2.194.1.7	OCTET STRING	accessible-for-notify	The VPN name, to which the rule will be applied. Default value is zero-length.
INT hh3cCupmCpVbVxlanState	1.3.6.1.4.1.25506.2.194.1.8	INTEGER	accessible-for-notify	The state of VXLAN protocol tunnel. 0 (unknown) The VXLAN protocol tunnel is in unknown state. 1 (up) The VXLAN protocol tunnel is in connected state. 2 (down) The VXLAN protocol tunnel is in disconnected state.
hh3cCupmCpScalarObjects	1.3.6.1.4.1.25506.2.194.2
I32 hh3cCupmUpNum	1.3.6.1.4.1.25506.2.194.2.1	Integer32	read-only	The number of UP device.
hh3cCupmCpTableObjects	1.3.6.1.4.1.25506.2.194.3
hh3cCupmUpListTable	1.3.6.1.4.1.25506.2.194.3.1		not-accessible	A table of UP management information.
hh3cCupmUpListEntry	1.3.6.1.4.1.25506.2.194.3.1.1		not-accessible	Entry items.
I32 hh3cCupmUpID	1.3.6.1.4.1.25506.2.194.3.1.1.1	Integer32	accessible-for-notify	The index value used to identify the UP device.
OCT hh3cCupmUpDescr	1.3.6.1.4.1.25506.2.194.3.1.1.2	OCTET STRING	read-create	A textual description of the entity. This value could include the full name and status of UP device.
ROW hh3cCupmUpListRowStatus	1.3.6.1.4.1.25506.2.194.3.1.1.3	RowStatus	read-create	Three status columns are supported, including 'active', 'createAndGo' and 'destroy'. The column of 'active' is used for modifying value of hh3cCupmUpDescr.
hh3cCupmCpProtoTnlTable	1.3.6.1.4.1.25506.2.194.3.2		not-accessible	The table that controls configuration of VXLAN tunnel on CP device.
hh3cCupmCpProtoTnlEntry	1.3.6.1.4.1.25506.2.194.3.2.1		not-accessible	Entry items.
I32 hh3cCupmCpProtoTnlVxlanID	1.3.6.1.4.1.25506.2.194.3.2.1.1	Integer32	read-only	Part of the index for this table, this value identifies the VXLAN protocol tunnel.
IPt hh3cCupmCpProtoTnlSrcAddrType	1.3.6.1.4.1.25506.2.194.3.2.1.2	InetAddressType	read-only	Specifies the type of local address to be used at a remote host for connecting VXLAN protocol tunnel.
IP hh3cCupmCpProtoTnlSrcAddr	1.3.6.1.4.1.25506.2.194.3.2.1.3	InetAddress	read-only	Specifies the local address to be used at a remote host for connecting VXLAN protocol tunnel. The host address type is determined by the object value of corresponding hh3cCupmCpProtoTnlSrcAddrType.
IPt hh3cCupmCpProtoTnlDstAddrType	1.3.6.1.4.1.25506.2.194.3.2.1.4	InetAddressType	read-only	Specifies the type of remote host for connecting the VXLAN protocol tunnel.
IP hh3cCupmCpProtoTnlDstAddr	1.3.6.1.4.1.25506.2.194.3.2.1.5	InetAddress	read-only	Specifies the remote host for connecting the VXLAN protocol tunnel.
OCT hh3cCupmCpProtoTnlVpnName	1.3.6.1.4.1.25506.2.194.3.2.1.6	OCTET STRING	read-create	The VPN name, to which the rule will be applied. Default value is zero-length.
INT hh3cCupmCpProtoTnlStateEx	1.3.6.1.4.1.25506.2.194.3.2.1.7	INTEGER	read-only	The state of VXLAN protocol tunnel. 0 (unknown) The VXLAN protocol tunnel is in unknown state. 1 (up) The VXLAN protocol tunnel is in connected state. 2 (down) The VXLAN protocol tunnel is in disconnected state.
ROW hh3cCupmCpProtoTnlRowStatus	1.3.6.1.4.1.25506.2.194.3.2.1.8	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hh3cCupmUpID must be specified.
hh3cCupmAgtProtoTnlTable	1.3.6.1.4.1.25506.2.194.3.3		not-accessible	Thie table provides VXLAN tunnel configuration of UP device which under control of CP device. This protocol tunnel allows to make configuration of UP device.
hh3cCupmAgtProtoTnlEntry	1.3.6.1.4.1.25506.2.194.3.3.1		not-accessible	Entry items.
I32 hh3cCupmAgtProtoTnlVxlanID	1.3.6.1.4.1.25506.2.194.3.3.1.1	Integer32	read-only	Part of the index for this table, this value identifies the VXLAN protocol tunnel.
IPt hh3cCupmAgtProtoTnlSrcAddrType	1.3.6.1.4.1.25506.2.194.3.3.1.2	InetAddressType	read-only	Specifies the type of local address to be used at a remote host for connecting VXLAN protocol tunnel.
IP hh3cCupmAgtProtoTnlSrcAddr	1.3.6.1.4.1.25506.2.194.3.3.1.3	InetAddress	read-only	Specifies the local address to be used at a remote host for connecting VXLAN protocol tunnel. The host address type is determined by the object value of corresponding hh3cCupmCpProtoTnlSrcAddrType.
IPt hh3cCupmAgtProtoTnlDstAddrType	1.3.6.1.4.1.25506.2.194.3.3.1.4	InetAddressType	read-only	Specifies the type of remote host for connecting the VXLAN protocol tunnel.
IP hh3cCupmAgtProtoTnlDstAddr	1.3.6.1.4.1.25506.2.194.3.3.1.5	InetAddress	read-only	Specifies the remote host for connecting the VXLAN protocol tunnel.
OCT hh3cCupmAgtProtoTnlVpnName	1.3.6.1.4.1.25506.2.194.3.3.1.6	OCTET STRING	read-create	The VPN name, to which the rule will be applied. Default value is zero-length.
ROW hh3cCupmAgtProtoTnlRowStatus	1.3.6.1.4.1.25506.2.194.3.3.1.7	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, hh3cCupmUpID must be specified.

RFC description

Control plane configuration information MIB for H3C network devices with VXLAN tunnel management.

Start monitoring H3C SDN/data-center fabric switch/controller (CUPM control plane, VXLAN overlay) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download HH3C-CUPM-CP-MIB