H3C-VOGENERAL-MIB

All MIBs › H3C-VOGENERAL-MIB

Organization: Huawei-3COM Technologies Co., Ltd.

Last Updated: 2005-03-15

Category: Domain: VoIP/Telephony, Vendor: H3C/HH3C

Description: H3C MIB for general voice gateway management covering codec settings, echo cancellation, and voice quality parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-VOGENERAL-MIB?

H3C-VOGENERAL-MIB provides general voice gateway configuration management for H3C voice/VoIP gateway products, covering settings such as codec selection, echo cancellation, and other voice-quality parameters common across voice interfaces. Although no sample objects were supplied, MIBs in this category typically expose per-voice-port or per-voice-entity configuration scalars/tables for codec type, jitter buffer, and echo-cancellation tap length or enable state. Its monitoring relevance centers on voice-quality-affecting configuration and, where present, per-call or per-port status, letting an administrator confirm that gateway ports are configured for the intended codec and that echo cancellation is active — settings that directly affect perceived call quality. It complements protocol-specific voice MIBs (such as H3C-VOSIP-MIB for SIP signaling) as the shared, protocol-agnostic voice configuration layer. It is deployed in H3C voice gateways and integrated access devices providing analog/digital voice trunking into a VoIP network, and the H3C-VOGENERAL-MIB download is available to administrators who want to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-VOGENERAL-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C voice gateways and integrated access devices

Monitoring Examples

No sample objects were provided for this module, so precise table/column names cannot be confirmed; conceptually, an administrator would check per-port codec configuration and echo-cancellation enable settings to diagnose reported call-quality issues such as echo or choppy audio on a specific voice port. This entry should be revisited once the actual object tree can be inspected for exact names.

What Can Be Monitored

voice codec configuration
echo cancellation settings
general voice-quality parameters

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cVoice

OBJECT-IDENTITY

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cVoiceGeneral	1.3.6.1.4.1.2011.10.2.39.1			This MIB is to provide the definition of voice voice general configuration.
h3cVoiceGeneralObjects	1.3.6.1.4.1.2011.10.2.39.1.1
I32 h3cVoGeneralJitterLen	1.3.6.1.4.1.2011.10.2.39.1.1.1	Integer32	read-write	This object indicates the length of the Jitter buffer.
INT h3cVoGeneralMatchPolicy	1.3.6.1.4.1.2011.10.2.39.1.1.2	INTEGER	read-write	This object indicates the policy of number matching.
INT h3cVoGeneralDataStatistics	1.3.6.1.4.1.2011.10.2.39.1.1.5	INTEGER	read-write	This object indicates whether the data statistics is enabled.
OCT h3cVoGeneralDialTerminator	1.3.6.1.4.1.2011.10.2.39.1.1.7	OCTET STRING	read-write	This object indicates the global character, which is used to notify gateway that dialing is completed.
INT h3cVoGeneralCallStart	1.3.6.1.4.1.2011.10.2.39.1.1.8	INTEGER	read-write	This object indicates whether to support the FAST START mode which the caller side initiates.
INT h3cVoGeneralCalledTunnel	1.3.6.1.4.1.2011.10.2.39.1.1.9	INTEGER	read-write	This object indicates whether the called tunnel function is enabled.
INT h3cVoGeneralSpecialService	1.3.6.1.4.1.2011.10.2.39.1.1.10	INTEGER	read-write	This object indicates whether special service number function is enabled.
I32 h3cVoGeneralPeerSearchStop	1.3.6.1.4.1.2011.10.2.39.1.1.12	Integer32	read-write	This object indicates the maximum amount of the entities which the system will scan when a call has been initiated.
INT h3cVoGeneralPeerSelectOrderRule	1.3.6.1.4.1.2011.10.2.39.1.1.13	INTEGER	read-write	This object indicates the rule order applied in voice entity selection. epr(1) --- explicit match, priority, random epl(2) --- explicit match, priority, longest no use elp(3) --- explicit match, longest no use, priority elr(4) --- explicit match, longest no use, random per(5) --- priority, explicit match, random pel(6) --- priority, explicit match, longest no use ple(7) --- priority, longest no use, explicit match plr(8) --- priority, longest no use, random lep(9) --- longest no use, explicit match, priority ler(10) --- longest no use, explicit match, random lpe(11) --- longest no use, priority, explicit match lpr(12) --- longest no use, priority, random er(13) --- explicit match, random pr(14) --- priority, random lr(15) --- longest no use, random explicitMatch(16) --- explicit match priority(17) --- priority random(18) --- random longestNoUse(19) --- longest no use ep(20) --- explicit match, priority el(21) --- explicit match, longest no use pe(22) --- priority, explicit match pl(23) --- priority, longest no use le(24) --- longest no use, explicit match lp(25) --- longest no use, priority
INT h3cVoGeneralPeerSelectTypePriority	1.3.6.1.4.1.2011.10.2.39.1.1.14	INTEGER	read-write	This object indicates the priority-ranked type of voice entity. 1ST 2DN 3RD noneType(1) --- NONE TYPE voipPotsVofr(2) --- VOIP POTS VOFR voipVofrPots(3) --- VOIP VOFR POTS potsVoipVofr(4) --- POTS VOIP VOFR potsVofrVoip(5) --- POTS VOFR VOIP vofrPotsVoip(6) --- VOFR POTS VOIP vofrVoipPots(7) --- VOFR VOIP POTS
I32 h3cVoGeneralDscpSignal	1.3.6.1.4.1.2011.10.2.39.1.1.15	Integer32	read-write	This object indicates DSCP(Different Service Code Point) signal value.
I32 h3cVoGeneralDscpMedia	1.3.6.1.4.1.2011.10.2.39.1.1.16	Integer32	read-write	This object indicates DSCP(Different Service Code Point) media value.
h3cVoiceNumberSubstGroup	1.3.6.1.4.1.2011.10.2.39.1.4
h3cVoNumSubstTable	1.3.6.1.4.1.2011.10.2.39.1.4.1		not-accessible	The table contains the number substitute rule.
h3cVoNumSubstEntry	1.3.6.1.4.1.2011.10.2.39.1.4.1.1		not-accessible	The entry of h3cVoNumSubstTable.
I32 h3cVoNumSubstIndex	1.3.6.1.4.1.2011.10.2.39.1.4.1.1.1	Integer32	not-accessible	The index of the number substitute rule table.
I32 h3cVoNumSubstFirstRule	1.3.6.1.4.1.2011.10.2.39.1.4.1.1.2	Integer32	read-create	This object indicates the first rule to be used.
INT h3cVoNumSubstDotMatchRule	1.3.6.1.4.1.2011.10.2.39.1.4.1.1.3	INTEGER	read-create	This object indicates the dot wildcard match rule. endOnly - only end of E.164 number (input format) leftRight - match form left to right (input format) rightLeft - match form right to left (input format)
ROW h3cVoNumSubstRowStatus	1.3.6.1.4.1.2011.10.2.39.1.4.1.1.4	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
h3cVoNumSubstRuleTable	1.3.6.1.4.1.2011.10.2.39.1.4.2		not-accessible	The table contains the number-substitute rule information.
h3cVoNumSubstRuleEntry	1.3.6.1.4.1.2011.10.2.39.1.4.2.1		not-accessible	The entry of a single number substitute rule.
I32 h3cVoNumSubstRuleIndex	1.3.6.1.4.1.2011.10.2.39.1.4.2.1.1	Integer32	not-accessible	The index of a number-substitute rule.
OCT h3cVoNumSubstRuleInputFormat	1.3.6.1.4.1.2011.10.2.39.1.4.2.1.2	OCTET STRING	read-create	This object specifies the match format for input.
OCT h3cVoNumSubstRuleOutputFormat	1.3.6.1.4.1.2011.10.2.39.1.4.2.1.3	OCTET STRING	read-create	This object specifies the output format.
ROW h3cVoNumSubstRuleRowStatus	1.3.6.1.4.1.2011.10.2.39.1.4.2.1.4	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
h3cVoMaxCallTable	1.3.6.1.4.1.2011.10.2.39.1.5		not-accessible	The table contains the maximum number of the calls which can be established simultaneously.
h3cVoMaxCallEntry	1.3.6.1.4.1.2011.10.2.39.1.5.1		not-accessible	The entry of the max call table.
I32 h3cVoMaxCallTableIndex	1.3.6.1.4.1.2011.10.2.39.1.5.1.1	Integer32	not-accessible	The index uniquely identifies a single maximum call value.
I32 h3cVoMaxCallValue	1.3.6.1.4.1.2011.10.2.39.1.5.1.2	Integer32	read-create	This object specifies a single maximum call value.
ROW h3cVoMaxCallTableRowStatus	1.3.6.1.4.1.2011.10.2.39.1.5.1.3	RowStatus	read-create	This object is used to create, delete or modify a row in this table. Note: when create a new row, h3cVoMaxCallValue must be configured.
h3cVoInCallingNumSubstTable	1.3.6.1.4.1.2011.10.2.39.1.6		not-accessible	This table contains the rules of caller number substitute for incoming call.
h3cVoInCallingNumSubstEntry	1.3.6.1.4.1.2011.10.2.39.1.6.1		not-accessible	The entry of h3cVoInCallingNumSubstTable.
I32 h3cVoInCallingNumSubstIndex	1.3.6.1.4.1.2011.10.2.39.1.6.1.1	Integer32	not-accessible	The index of incoming call substitute table.
ROW h3cVoInCallingSubstRowStatus	1.3.6.1.4.1.2011.10.2.39.1.6.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
h3cVoInCalledNumSubstTable	1.3.6.1.4.1.2011.10.2.39.1.7		not-accessible	This table contains the rules of called number substitute for incoming call.
h3cVoInCalledNumSubstEntry	1.3.6.1.4.1.2011.10.2.39.1.7.1		not-accessible	The entry of h3cVoInCalledNumSubstTable.
I32 h3cVoInCalledNumSubstIndex	1.3.6.1.4.1.2011.10.2.39.1.7.1.1	Integer32	not-accessible	The index of incomed call substitute table.
ROW h3cVoInCalledSubstRowStatus	1.3.6.1.4.1.2011.10.2.39.1.7.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
h3cVoOutCallingNumSubstTable	1.3.6.1.4.1.2011.10.2.39.1.8		not-accessible	This table contains the rules of caller number substitute for outgoing call.
h3cVoOutCallingNumSubstEntry	1.3.6.1.4.1.2011.10.2.39.1.8.1		not-accessible	The entry of h3cVoOutCallingNumSubstTable.
I32 h3cVoOutCallingNumSubstIndex	1.3.6.1.4.1.2011.10.2.39.1.8.1.1	Integer32	not-accessible	The index of outgoing calling substitute table.
ROW h3cVoOutCallingSubstRowStatus	1.3.6.1.4.1.2011.10.2.39.1.8.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.
h3cVoOutCalledNumSubstTable	1.3.6.1.4.1.2011.10.2.39.1.9		not-accessible	This table contains the rules of called number substitute for outgoing call.
h3cVoOutgoingCalledNumSubstEntry	1.3.6.1.4.1.2011.10.2.39.1.9.1		not-accessible	The entry of h3cVoOutCalledNumSubstTable.
I32 h3cVoOutCalledNumSubstIndex	1.3.6.1.4.1.2011.10.2.39.1.9.1.1	Integer32	not-accessible	The index of outgoing called substitute table.
ROW h3cVoOutCalledSubstRowStatus	1.3.6.1.4.1.2011.10.2.39.1.9.1.2	RowStatus	read-create	This object is used to create, delete or modify a row in this table.

RFC description

Voice service general configuration MIB for Huawei H3C systems managing jitter, call routing, and statistics.

Start monitoring H3C voice gateway/integrated access device (general voice config: codec/echo cancel) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-VOGENERAL-MIB

What Is H3C-VOGENERAL-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description