H3C-RADIUS-MIB

All MIBs › H3C-RADIUS-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2010-08-26

Category: RADIUS and AAA, Vendor: H3C/HH3C

Description: H3C MIB for RADIUS protocol management configuring authentication/accounting servers and monitoring request statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-RADIUS-MIB?

H3C-RADIUS-MIB is a vendor-specific MIB from H3C for managing and monitoring the RADIUS authentication, authorization, and accounting feature on H3C network devices. It exposes both configuration of RADIUS servers and runtime statistics counting accounting and logout request/acknowledgment traffic exchanged with RADIUS servers. This MIB is used primarily to monitor the software/service health of the RADIUS client subsystem, letting operators confirm that authentication requests are being answered promptly and that accounting/logout handshakes are completing rather than timing out or being dropped. It complements the standard RADIUS-related IETF MIBs (RFC 4668/4669) with H3C-specific statistics not covered by the standard tree, though it functions independently as a private MIB. It is typically deployed on H3C switches, routers, and wireless controllers performing 802.1X or PPP authentication in enterprise networks with a centralized AAA infrastructure. Engineers can download the H3C-RADIUS-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-RADIUS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C switches
H3C routers
H3C wireless controllers

Monitoring Examples

An administrator would poll h3cRadiusStatAccReq against h3cRadiusStatAccAck to compute the ratio of accounting requests sent versus acknowledged, revealing whether the RADIUS server is responding reliably or silently dropping accounting records. Similarly, comparing h3cRadiusStatLogoutReq to h3cRadiusStatLogoutAck exposes whether logout/disconnect messages are being processed correctly. The aggregate h3cRadiusStatistic object provides a rolled-up view for quick health checks during troubleshooting of authentication delays. A growing gap between requests and acknowledgments over time would indicate RADIUS server unavailability or network path issues to the AAA server.

What Can Be Monitored

accounting request/acknowledge counts
logout request/acknowledge counts
aggregate RADIUS statistics
RADIUS server response health

Imported Objects

From HUAWEI-3COM-OID-MIB

h3cCommon

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From RADIUS-ACC-CLIENT-MIB

radiusAccClientServerPortNumber	OBJECT-TYPE
radiusAccServerAddress	OBJECT-TYPE
radiusAccServerIndex	OBJECT-TYPE

From RADIUS-AUTH-CLIENT-MIB

radiusAuthClientServerPortNumber	OBJECT-TYPE
radiusAuthServerAddress	OBJECT-TYPE
radiusAuthServerIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using h3cRadiusStatAccReq OID:

Select an H3C switch, router, or wireless controller as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cRadiusStatAccReq into the Find box to locate it in the OID tree, then select it and click OK. It shows the number of radius account request to the radius server. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cRadius	1.3.6.1.4.1.2011.10.2.13			The H3C-RADIUS-MIB contains objects to Manage configuration and Monitor running state for RADIUS feature.
h3cRdObjects	1.3.6.1.4.1.2011.10.2.13.1
h3cRdInfoTable	1.3.6.1.4.1.2011.10.2.13.1.1		not-accessible	The (conceptual) table listing RADIUS authentication servers.
h3cRdInfoEntry	1.3.6.1.4.1.2011.10.2.13.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS authentication server.
STR h3cRdGroupName	1.3.6.1.4.1.2011.10.2.13.1.1.1.1	DisplayString	not-accessible	The name of the RADIUS authentication group referred to in this table entry.
IP h3cRdPrimAuthIp	1.3.6.1.4.1.2011.10.2.13.1.1.1.2	IpAddress	read-create	The IP address of primary RADIUS authentication server.
I32 h3cRdPrimUdpPort	1.3.6.1.4.1.2011.10.2.13.1.1.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
INT h3cRdPrimState	1.3.6.1.4.1.2011.10.2.13.1.1.1.4	INTEGER	read-create	The state of the primary RADIUS authentication server. 1 (active) The primary authentication server is in active state. 2 (block) The primary authentication server is in block state.
IP h3cRdSecAuthIp	1.3.6.1.4.1.2011.10.2.13.1.1.1.5	IpAddress	read-create	The IP address of secondary RADIUS authentication server.
I32 h3cRdSecUdpPort	1.3.6.1.4.1.2011.10.2.13.1.1.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
INT h3cRdSecState	1.3.6.1.4.1.2011.10.2.13.1.1.1.7	INTEGER	read-create	The state of the secondary RADIUS authentication server. 1 (active) The secondary authentication server is in active state. 2 (block) The secondary authentication server is in block state.
STR h3cRdKey	1.3.6.1.4.1.2011.10.2.13.1.1.1.8	DisplayString	read-create	The secret shared between the RADIUS client and RADIUS authentication server used in encoding and decoding sensitive data. Length is 1 - 16 characters.
I32 h3cRdRetry	1.3.6.1.4.1.2011.10.2.13.1.1.1.9	Integer32	read-create	The number of attempts the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
I32 h3cRdTimeout	1.3.6.1.4.1.2011.10.2.13.1.1.1.10	Integer32	read-create	The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
IPt h3cRdPrimAuthIpAddrType	1.3.6.1.4.1.2011.10.2.13.1.1.1.11	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of primary RADIUS authentication server.
IP h3cRdPrimAuthIpAddr	1.3.6.1.4.1.2011.10.2.13.1.1.1.12	InetAddress	read-create	The IP address of primary RADIUS authentication server.
IPt h3cRdSecAuthIpAddrType	1.3.6.1.4.1.2011.10.2.13.1.1.1.13	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of secondary RADIUS authentication server.
IP h3cRdSecAuthIpAddr	1.3.6.1.4.1.2011.10.2.13.1.1.1.14	InetAddress	read-create	The IP address of secondary RADIUS authentication server.
INT h3cRdServerType	1.3.6.1.4.1.2011.10.2.13.1.1.1.15	INTEGER	read-create	Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
INT h3cRdQuietTime	1.3.6.1.4.1.2011.10.2.13.1.1.1.16	INTEGER	read-create	The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
INT h3cRdUserNameFormat	1.3.6.1.4.1.2011.10.2.13.1.1.1.17	INTEGER	read-create	Specify the user-name format that is sent to RADIUS server. 1 (withoutdomain) - send the user-name without domain. 2 (withdomain) - send the user-name with domain. Default format is withdomain.
ROW h3cRdRowStatus	1.3.6.1.4.1.2011.10.2.13.1.1.1.18	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdGroupName must be specified. To destroy an existent row, the h3cRdGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
STR h3cRdSecKey	1.3.6.1.4.1.2011.10.2.13.1.1.1.19	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data. Length is 1 - 16 characters.
h3cRdAccInfoTable	1.3.6.1.4.1.2011.10.2.13.1.2		not-accessible	The (conceptual) table listing RADIUS accounting servers.
h3cRdAccInfoEntry	1.3.6.1.4.1.2011.10.2.13.1.2.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server.
STR h3cRdAccGroupName	1.3.6.1.4.1.2011.10.2.13.1.2.1.1	DisplayString	not-accessible	The name of the RADIUS group referred to in this table entry.
IPt h3cRdPrimAccIpAddrType	1.3.6.1.4.1.2011.10.2.13.1.2.1.2	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of primary RADIUS accounting server.
IP h3cRdPrimAccIpAddr	1.3.6.1.4.1.2011.10.2.13.1.2.1.3	InetAddress	read-create	The IP address of primary RADIUS accounting server.
I32 h3cRdPrimAccUdpPort	1.3.6.1.4.1.2011.10.2.13.1.2.1.4	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1813.
INT h3cRdPrimAccState	1.3.6.1.4.1.2011.10.2.13.1.2.1.5	INTEGER	read-create	The state of the primary RADIUS accounting server. 1 (active) The primary accounting server is in active state. 2 (block) The primary accounting server is in block state.
IPt h3cRdSecAccIpAddrType	1.3.6.1.4.1.2011.10.2.13.1.2.1.6	InetAddressType	read-create	The IP addresses type (IPv4 or IPv6) of secondary RADIUS accounting server.
IP h3cRdSecAccIpAddr	1.3.6.1.4.1.2011.10.2.13.1.2.1.7	InetAddress	read-create	The IP address of secondary RADIUS accounting server.
I32 h3cRdSecAccUdpPort	1.3.6.1.4.1.2011.10.2.13.1.2.1.8	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1813.
INT h3cRdSecAccState	1.3.6.1.4.1.2011.10.2.13.1.2.1.9	INTEGER	read-create	The state of the secondary RADIUS accounting server. 1 (active) The secondary accounting server is in active state. 2 (block) The secondary accounting server is in block state.
STR h3cRdAccKey	1.3.6.1.4.1.2011.10.2.13.1.2.1.10	DisplayString	read-create	The secret shared between the RADIUS client and RADIUS accounting server used in encoding and decoding sensitive data. Length is 1 - 16 characters.
I32 h3cRdAccRetry	1.3.6.1.4.1.2011.10.2.13.1.2.1.11	Integer32	read-create	The number of attempt the client will make when trying to send requests to a server before it will consider the attempt failed. Default value is 3.
I32 h3cRdAccTimeout	1.3.6.1.4.1.2011.10.2.13.1.2.1.12	Integer32	read-create	The timeout value the client will use when sending requests to a server. The unit is second. Default value is 3.
INT h3cRdAccServerType	1.3.6.1.4.1.2011.10.2.13.1.2.1.13	INTEGER	read-create	Specify the type of RADIUS server. 1 (standard) - Server based on RFC protocol(s). 2 (iphotel) - Server for IP-Hotel or 201+ system. 3 (portal) - Server for iTellin Portal system. 4 (extended) - Server based on RADIUS extensions. Default type is standard.
INT h3cRdAccQuietTime	1.3.6.1.4.1.2011.10.2.13.1.2.1.14	INTEGER	read-create	The time for server returning active. The unit is minute. When the value is 0, the server state retains active. Default value is 5.
INT h3cRdAccFailureAction	1.3.6.1.4.1.2011.10.2.13.1.2.1.15	INTEGER	read-create	Defines the action that authentication should take if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is 1(reject).
INT h3cRdAccRealTime	1.3.6.1.4.1.2011.10.2.13.1.2.1.16	INTEGER	read-create	Interval of realtime-accounting packets. The unit is minute. The time must be a multiple of 3. when the value is 0, the device doesn't send realtime-accounting packet. Default value is 12.
INT h3cRdAccRealTimeRetry	1.3.6.1.4.1.2011.10.2.13.1.2.1.17	INTEGER	read-create	The number of attempt the client will make when trying to send realtime-accounting packet to accounting server before it will consider the attempt failed. Default value is 5.
T/F h3cRdAccSaveStopPktEnable	1.3.6.1.4.1.2011.10.2.13.1.2.1.18	TruthValue	read-create	The control of whether save stop-accounting packet in local buffer and resend later when the accounting server doesn't respond. When SaveStopPktEnable is set to false, the value of AccStopRetry will be ignored. Default value is true.
INT h3cRdAccStopRetry	1.3.6.1.4.1.2011.10.2.13.1.2.1.19	INTEGER	read-create	The number of attempt the client will make when trying to send stop-accounting packet to accounting server. Default value is 500.
INT h3cRdAccDataFlowUnit	1.3.6.1.4.1.2011.10.2.13.1.2.1.20	INTEGER	read-create	Specify data flow format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (byte) - Specify 'byte' as the unit of data flow. 2 (kiloByte) - Specify 'kilo-byte' as the unit of data flow. 3 (megaByte) - Specify 'mega-byte' as the unit of data flow. 4 (gigaByte) - Specify 'giga-byte' as the unit of data flow. Default value is 1.
INT h3cRdAccPacketUnit	1.3.6.1.4.1.2011.10.2.13.1.2.1.21	INTEGER	read-create	Specify packet format that is sent to RADIUS server. The value SHOULD be set the same as the value of corresponding server. 1 (onePacket) - Specify 'one-packet' as the unit of packet. 2 (kiloPacket) - Specify 'kilo-packet' as the unit of packet. 3 (megaPacket) - Specify 'mega-packet' as the unit of packet. 4 (gigaPacket) - Specify 'giga-packet' as the unit of packet. Default value is 1.
ROW h3cRdAccRowStatus	1.3.6.1.4.1.2011.10.2.13.1.2.1.22	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRdAccGroupName must be specified. To destroy an existent row, the h3cRdAccGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
T/F h3cRdAcctOnEnable	1.3.6.1.4.1.2011.10.2.13.1.2.1.23	TruthValue	read-create	The control of Accounting-On function. The Accounting-On function is used by the client to mark the start of accounting (for example, upon booting) by sending Accounting-On packets and to mark the end of accounting (for example, just before a scheduled reboot) by sending Accounting-Off packets. Default value is false.
I32 h3cRdAcctOnSendTimes	1.3.6.1.4.1.2011.10.2.13.1.2.1.24	Integer32	read-create	The number of Accounting-On packets the client will send before it considers the accounting server failed. Default value is 15.
I32 h3cRdAcctOnSendInterval	1.3.6.1.4.1.2011.10.2.13.1.2.1.25	Integer32	read-create	Interval of Accounting-On packets. The unit is second. Default value is 3.
STR h3cRdSecAccKey	1.3.6.1.4.1.2011.10.2.13.1.2.1.26	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data. Length is 1 - 16 characters.
h3cRadiusGlobalConfig	1.3.6.1.4.1.2011.10.2.13.1.3
U32 h3cRadiusAuthErrThreshold	1.3.6.1.4.1.2011.10.2.13.1.3.1	Unsigned32	read-write	The threshold of authentication failure trap. A trap will be sent when the percent of the unsuccessful authentication exceeds this threshold.
h3cRadiusAccounting	1.3.6.1.4.1.2011.10.2.13.2
h3cRadiusAccClient	1.3.6.1.4.1.2011.10.2.13.2.1
h3cRadiusAccServerTable	1.3.6.1.4.1.2011.10.2.13.2.1.1		not-accessible	The (conceptual) table listing the RADIUS accounting servers with which the client shares a secret.
h3cRadiusAccServerEntry	1.3.6.1.4.1.2011.10.2.13.2.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS accounting server with which a client shares a secret.
C32 h3cRadiusAccClientStartRequests	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.1	Counter32	read-only	The number of RADIUS accounting start request sent to this server.
C32 h3cRadiusAccClientStartResponses	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.2	Counter32	read-only	The number of RADIUS accounting start response received from this server.
C32 h3cRadiusAccClientInterimRequests	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.3	Counter32	read-only	The number of RADIUS interim accounting request sent to this server.
C32 h3cRadiusAccClientInterimResponses	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.4	Counter32	read-only	The number of RADIUS interim accounting response received from this server.
C32 h3cRadiusAccClientStopRequests	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.5	Counter32	read-only	The number of RADIUS stop accounting request sent to this RADIUS server.
C32 h3cRadiusAccClientStopResponses	1.3.6.1.4.1.2011.10.2.13.2.1.1.1.6	Counter32	read-only	The number of RADIUS stop accounting response received from this server.
h3cRadiusServerTrap	1.3.6.1.4.1.2011.10.2.13.3
h3cRadiusServerTrapPrefix	1.3.6.1.4.1.2011.10.2.13.3.0
NTF h3cRadiusAuthServerUpTrap	1.3.6.1.4.1.2011.10.2.13.3.0.1			This trap is generated when the device finds that the state of RADIUS authentication server becomes reachable from unreachable.
NTF h3cRadiusAccServerUpTrap	1.3.6.1.4.1.2011.10.2.13.3.0.2			This trap is generated when the device finds that the state of RADIUS accounting server becomes reachable from unreachable.
NTF h3cRadiusAuthErrTrap	1.3.6.1.4.1.2011.10.2.13.3.0.3			This trap is generated when the device finds that the percent of unsuccessful authentication exceeds a threshold, and the threshold is the value of node h3cRadiusAuthErrThreshold.
NTF h3cRadiusAuthServerDownTrap	1.3.6.1.4.1.2011.10.2.13.3.1			This trap is generated when the authentication RADIUS server doesn't respond client's requests for specified times.
NTF h3cRadiusAccServerDownTrap	1.3.6.1.4.1.2011.10.2.13.3.2			This trap is generated when the accounting RADIUS server doesn't respond client's requests for specified times.
h3cRadiusAuthenticating	1.3.6.1.4.1.2011.10.2.13.4
h3cRadiusAuthClient	1.3.6.1.4.1.2011.10.2.13.4.1
h3cRadiusAuthServerTable	1.3.6.1.4.1.2011.10.2.13.4.1.1		not-accessible	The (conceptual) table listing the RADIUS authenticating servers with which the client shares a secret.
h3cRadiusAuthServerEntry	1.3.6.1.4.1.2011.10.2.13.4.1.1.1		not-accessible	An entry (conceptual row) representing a RADIUS authenticating server with which a client shares a secret.
C32 h3cRadiusAuthFailureTimes	1.3.6.1.4.1.2011.10.2.13.4.1.1.1.1	Counter32	read-only	The number of RADIUS authenticating failed to this server.
C32 h3cRadiusAuthTimeoutTimes	1.3.6.1.4.1.2011.10.2.13.4.1.1.1.2	Counter32	read-only	The number of RADIUS authenticating timeout to this server.
C32 h3cRadiusAuthRejectTimes	1.3.6.1.4.1.2011.10.2.13.4.1.1.1.3	Counter32	read-only	The number of RADIUS authenticating rejected to this server.
h3cRadiusExtend	1.3.6.1.4.1.2011.10.2.13.5
h3cRadiusExtendObjects	1.3.6.1.4.1.2011.10.2.13.5.1
h3cRadiusExtendTables	1.3.6.1.4.1.2011.10.2.13.5.2
h3cRadiusSchAuthTable	1.3.6.1.4.1.2011.10.2.13.5.2.1		not-accessible	The (conceptual) table listing RADIUS authentication servers.
h3cRadiusSchAuthEntry	1.3.6.1.4.1.2011.10.2.13.5.2.1.1		not-accessible	An entry (conceptual row) representing RADIUS authentication servers.
STR h3cRadiusSchAuthGroupName	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.1	DisplayString	not-accessible	The name of the RADIUS authentication server group referred to in this table entry.
IP h3cRadiusSchAuthPrimIpAddr	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.2	IpAddress	read-create	The IP address of primary RADIUS authenticaiton server.
I32 h3cRadiusSchAuthPrimUdpPort	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS authentication server. Default value is 1812.
STR h3cRadiusSchAuthPrimKey	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.4	DisplayString	read-create	The secret shared between the RADIUS client and the primary RADIUS authentication server used in encoding and decoding sensitive data.
IP h3cRadiusSchAuthSecIpAddr	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.5	IpAddress	read-create	The IP address of secondary RADIUS authenticaiton server.
I32 h3cRadiusSchAuthSecUdpPort	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS authentication server. Default value is 1812.
STR h3cRadiusSchAuthSecKey	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.7	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS authentication server used in encoding and decoding sensitive data.
ROW h3cRadiusSchAuthRowStatus	1.3.6.1.4.1.2011.10.2.13.5.2.1.1.8	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRadiusSchAuthGroupName must be specified, and this action will create a corresponding domain that h3cDomainRadiusGroupName is the same as h3cRadiusSchAuthGroupName. To destroy an existent row, the h3cRadiusSchAuthGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
h3cRadiusSchAccTable	1.3.6.1.4.1.2011.10.2.13.5.2.2		not-accessible	The (conceptual) table listing RADIUS accounting servers.
h3cRadiusSchAccEntry	1.3.6.1.4.1.2011.10.2.13.5.2.2.1		not-accessible	An entry (conceptual row) representing RADIUS accounting servers.
STR h3cRadiusSchAccGroupName	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.1	DisplayString	not-accessible	The name of the RADIUS accounting server group referred to in this table entry.
IP h3cRadiusSchAccPrimIpAddr	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.2	IpAddress	read-create	The IP address of primary RADIUS accounting server.
I32 h3cRadiusSchAccPrimUdpPort	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.3	Integer32	read-create	The UDP port the client is using to send requests to primary RADIUS accounting server. Default value is 1812.
STR h3cRadiusSchAccPrimKey	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.4	DisplayString	read-create	The secret shared between the RADIUS client and the primary RADIUS accounting server used in encoding and decoding sensitive data.
IP h3cRadiusSchAccSecIpAddr	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.5	IpAddress	read-create	The IP address of secondary RADIUS accounting server.
I32 h3cRadiusSchAccSecUdpPort	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.6	Integer32	read-create	The UDP port the client is using to send requests to secondary RADIUS accounting server. Default value is 1812.
STR h3cRadiusSchAccSecKey	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.7	DisplayString	read-create	The secret shared between the RADIUS client and the secondary RADIUS accounting server used in encoding and decoding sensitive data.
ROW h3cRadiusSchAccRowStatus	1.3.6.1.4.1.2011.10.2.13.5.2.2.1.8	RowStatus	read-create	This object is responsible for managing the creation, deletion and modification of rows, which support active status and CreateAndGo, Destroy operation. To create a new row, h3cRadiusSchAccGroupName must be specified, and this action will create a corresponding domain that h3cDomainRadiusGroupName is the same as h3cRadiusSchAccGroupName. To destroy an existent row, the h3cRadiusSchAccGroupName MUST NOT be referred by h3cDomainTable in h3cDomainRadiusGroupName column.
h3cRadiusExtendTraps	1.3.6.1.4.1.2011.10.2.13.5.3
h3cRadiusStatistic	1.3.6.1.4.1.2011.10.2.13.6
C64 h3cRadiusStatAccReqEx	1.3.6.1.4.1.2011.10.2.13.6.1	Counter64	read-only	It shows the number of radius account request to the radius server.
C64 h3cRadiusStatAccAck	1.3.6.1.4.1.2011.10.2.13.6.2	Counter64	read-only	It shows the number of radius account response from the radius server.
C64 h3cRadiusStatLogoutReq	1.3.6.1.4.1.2011.10.2.13.6.3	Counter64	read-only	It shows the number of logout request to the radius server.
C64 h3cRadiusStatLogoutAck	1.3.6.1.4.1.2011.10.2.13.6.4	Counter64	read-only	It shows the number of logout response from the radius server.

RFC description

Manages RADIUS server configuration and statistics for authentication and accounting, complementing IETF standard RADIUS client MIBs.

Start monitoring H3C switches, routers, and wireless controllers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-RADIUS-MIB