FASTPATH-QOS-DIFFSERV-PRIVATE-MIB

All MIBs › FASTPATH-QOS-DIFFSERV-PRIVATE-MIB

Organization: Netgear

Last Updated: 2007-11-12

Category: Quality of Service, Vendor: Broadcom

Description: Broadcom/Netgear FastPath private DiffServ MIB covering classifier rules, policy tables, and service-level configuration for QoS.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FASTPATH-QOS-DIFFSERV-PRIVATE-MIB?

FASTPATH-QOS-DIFFSERV-PRIVATE-MIB is a Netgear proprietary MIB (Broadcom FastPath switch software) extending the standard FASTPATH-QOS-MIB with private DiffServ objects. Its objects cover general DiffServ admin mode and current/max table-size counts for classes, class-rules, policies, policy instances, policy attributes, and services, and a class table (name, type, associated ACL number/type, protocol type, next-free rule index, storage type, row status). As a configuration MIB it lets an administrator confirm DiffServ class-table capacity and audit a class's associated ACL before troubleshooting unexpected QoS classification. It is deployed on Netgear (Broadcom FastPath-based) managed switches. Engineers can download the FASTPATH-QOS-DIFFSERV-PRIVATE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FASTPATH-QOS-DIFFSERV-PRIVATE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Netgear (Broadcom FastPath-based) managed switches

Monitoring Examples

An administrator checks agentDiffServGenStatusClassTableSize against ClassTableMax to confirm there's still capacity for a new DiffServ class before adding one on a Netgear switch.

What Can Be Monitored

DiffServ class-table capacity and class-to-ACL association

Imported Objects

From FASTPATH-QOS-MIB

fastPathQOS

MODULE-IDENTITY

From IANAifType-MIB

IANAifType

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From INET-ADDRESS-MIB

InetPortNumber

From RFC1155-SMI

TimeTicks

From RFC1213-MIB

DisplayString
PhysAddress

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowPointer
RowStatus
StorageType
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using agentDiffServPolicyPerfInOfferedOctets OID:

Select a Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (DiffServ QoS policy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type agentDiffServPolicyPerfInOfferedOctets into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the offered octets count for the inbound policy-class instance performance entry. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
fastPathQOSDiffServPrivate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7			The Netgear Private MIB for FASTPATH DiffServ
agentDiffServGenStatusGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1
INT agentDiffServGenStatusAdminMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.1	INTEGER	read-write	DiffServ Admin Mode
U32 agentDiffServGenStatusClassTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.2	Unsigned32	read-only	Current size of the Class Table
U32 agentDiffServGenStatusClassTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.3	Unsigned32	read-only	Max size of the Class Table
U32 agentDiffServGenStatusClassRuleTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.4	Unsigned32	read-only	Current size of Class Rule Table
U32 agentDiffServGenStatusClassRuleTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.5	Unsigned32	read-only	Max size of the Class Rule Table.
U32 agentDiffServGenStatusPolicyTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.6	Unsigned32	read-only	Current Size of the Policy Table.
U32 agentDiffServGenStatusPolicyTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.7	Unsigned32	read-only	Max size of the Policy Table
U32 agentDiffServGenStatusPolicyInstTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.8	Unsigned32	read-only	Current size of the Policy-Class Instance Table
U32 agentDiffServGenStatusPolicyInstTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.9	Unsigned32	read-only	Max size of the Policy-Class Instance Table
U32 agentDiffServGenStatusPolicyAttrTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.10	Unsigned32	read-only	Current size of the Policy Attribute Table
U32 agentDiffServGenStatusPolicyAttrTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.11	Unsigned32	read-only	Max size of the Policy Attribute Table
U32 agentDiffServGenStatusServiceTableSize	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.12	Unsigned32	read-only	Current size of the Service Table
U32 agentDiffServGenStatusServiceTableMax	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.1.13	Unsigned32	read-only	Max size of the Service Table
agentDiffServClassGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2
U32 agentDiffServClassIndexNextFree	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.1	Unsigned32	read-only	This object contains an unused value for classIndex, or a zero to indicate that none exists.
agentDiffServClassTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2		not-accessible	A table of the DiffServ class entries
agentDiffServClassEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1		not-accessible	Represents entry for a DiffServ traffic class
U32 agentDiffServClassIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.1	Unsigned32	not-accessible	The identifier for DiffServ Class entry
STR agentDiffServClassName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.2	DisplayString	read-create	Name of the DiffServ traffic class
INT agentDiffServClassType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.3	INTEGER	read-create	The class type indicates how the individual class match criteria are evaluated. For type all, all of the individual match conditions must be true for a packet to be considered a member of the class. For types any and acl, only one of the match criteria must be true for a packet to belong to the class; multiple matching criteria are evaluated in a sequential order, with the highest precedence awarded to the first criterion defined for the class. An acl class type copies its set of match criteria from the current rule definition of the specified ACL number.
U32 agentDiffServClassAclNum	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.4	Unsigned32	read-create	The access list number used to define the match conditions for the DiffServ class. This attribute is only valid if the value of agentDiffServClassType is set to acl(3). Match conditions are copied from the ACL definition at the time the class is created and do not reflect subsequent changes to the ACL definition. This attribute requires that the agentDiffServClassAclType object also be set so that the ACL number can be interpreted relative to ip(1) or mac(2) ACLs. The objects may be set in either order. The FASTPATH-QOS-ACL-MIB defines an aclIndex for IP ACLs and an aclMacIndex for MAC ACLs. Setting this object to one of these values per the agentDiffServClassAclType causes the corresponding ACL rules to be used for creating the DiffServ class.
U32 agentDiffServClassRuleIndexNextFree	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.5	Unsigned32	read-only	This object contains an unused value for classRuleIndex, or a zero to indicate that none exists. This index is maintained on a per-class basis.
STO agentDiffServClassStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.6	StorageType	read-create	Storage-type for this conceptual row
ROW agentDiffServClassRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.7	RowStatus	read-create	The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServClassRuleTable with corresponding values of agentDiffServClassIndex have been deleted.
INT agentDiffServClassAclType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.8	INTEGER	read-create	The access list type used to define the match conditions for the DiffServ class. This attribute is only valid if the value of agentDiffServClassType is set to acl(3). When this attribute is set to ip(1), the agentDiffServClassAclNum object is interpreted as an IP ACL number per the aclIndex definition from the FASTPATH-QOS-ACL-MIB. When set to mac(2), the agentDiffServClassAclNum object is interpreted as a MAC ACL index per the aclMacIndex definition in the FASTPATH-QOS-ACL-MIB. When set to ipv6(3), the agentDiffServClassAclNum object is interpreted as a IPv6 ACL index per the aclIpv6Index definition in the FASTPATH-QOS-ACL-MIB. All these objects and agentDiffServClassAclNum must be set (in either order) for an agentDiffServClassType of acl(3).
INT agentDiffServClassProtoType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.2.1.9	INTEGER	read-create	The diffserv class protocol type used to indicate how to interpret any layer 3. This attribute is only valid if the value of agentDiffServClassProtoType is set to all(1) or any(2).
agentDiffServClassRuleTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3		not-accessible	A table of the DiffServ Class Rule entries
agentDiffServClassRuleEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1		not-accessible	Represents entry for a set of class-match rules
U32 agentDiffServClassRuleIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.1	Unsigned32	not-accessible	The identifier for DiffServ Class Rule Table entry within a class
INT agentDiffServClassRuleMatchEntryType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.2	INTEGER	read-create	Class Rule match entry type, it determines which one of the individual match conditions is defined for the present class rule. This object must be created before any other match object in this row.
U32 agentDiffServClassRuleMatchCos	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.3	Unsigned32	read-create	Three-bit user priority field in the 802.1Q tag header of a tagged Ethernet frame used as a class-match parameter - only valid if the agentDiffServClassRuleMatchEntryType is set to cos(1). For frames containing a double VLAN tag, this field is located in the first/outer tag.
IP agentDiffServClassRuleMatchDstIpAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.4	IpAddress	read-create	Destination IP address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstip(2).
IP agentDiffServClassRuleMatchDstIpMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.5	IpAddress	read-create	Destination IP address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstip(2). This mask value identifies the portion of agentDiffServClassRuleMatchDstIpAddr that is compared against a packet. A non-contiguous mask value is permitted.
INE agentDiffServClassRuleMatchDstL4PortStart	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.6	InetPortNumber	read-create	Destination layer 4 port range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
INE agentDiffServClassRuleMatchDstL4PortEnd	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.7	InetPortNumber	read-create	Destination layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstl4port(3).
MAC agentDiffServClassRuleMatchDstMacAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.8	MacAddress	read-create	Destination MAC address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstmac(4).
MAC agentDiffServClassRuleMatchDstMacMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.9	MacAddress	read-create	Destination MAC address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to dstmac(4). This mask value identifies the portion of agentDiffServClassRuleMatchDstMacAddr that is compared against a packet. A non-contiguous mask value is permitted.
T/F agentDiffServClassRuleMatchEvery	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.10	TruthValue	read-only	Flag to indicate that the class rule is defined to match on every packet, regardless of content. - only valid if the agentDiffServClassRuleMatchEntryType is set to every(5).
U32 agentDiffServClassRuleMatchIpDscp	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.11	Unsigned32	read-create	IP DiffServ Code Point (DSCP) match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to ipdscp(6). The DSCP is defined as the high-order six bits of the Service Type octet in the IPv4 header.
U32 agentDiffServClassRuleMatchIpPrecedence	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.12	Unsigned32	read-create	IP Precedence match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to ipprecedence(7). The Precedence bits are defined as the high-order three bits of the Service Type octed in the IPv4 header.
OCT agentDiffServClassRuleMatchIpTosBits	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.13	OCTET STRING	read-create	IP TOS bits match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to iptos(8). The TOS bits are defined as all eight bits of the Service Type octet in the IPv4 header.
OCT agentDiffServClassRuleMatchIpTosMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.14	OCTET STRING	read-create	IP TOS bits mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to iptos(8). This mask value identifies the portion of agentDiffServClassRuleMatchIpTosBits that is compared against a packet. A non-contiguous mask value is permitted.
U32 agentDiffServClassRuleMatchProtocolNum	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.15	Unsigned32	read-create	Protocol number match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to protocol(9).
U32 agentDiffServClassRuleMatchRefClassIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.16	Unsigned32	read-create	Index of the corresponding referenced class - only valid if the agentDiffServClassRuleMatchEntryType is set to refclass(10). The set of match conditions defined for the reference class are directly inherited by the current class. Restrictions: 1) The class types of both, current class and the reference class must be identical (i.e., any vs. any, or all vs. all). 2) Self-referencing of class-name is not allowed. 3) Any attempt to delete the reference class while still referenced by any class shall fail. 4) The combined match criteria of classname and reference class name must be an allowed combination based on the class type. Any subsequent changes to the reference class name match criteria must maintain this validity, or the change attempt shall fail.
IP agentDiffServClassRuleMatchSrcIpAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.17	IpAddress	read-create	Source IP address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcip(11).
IP agentDiffServClassRuleMatchSrcIpMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.18	IpAddress	read-create	Source IP address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcip(11). This mask value identifies the portion of agentDiffServClassRuleMatchSrcIpAddr that is compared against a packet. A non-contiguous mask value is permitted.
INE agentDiffServClassRuleMatchSrcL4PortStart	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.19	InetPortNumber	read-create	Source layer 4 port range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
INE agentDiffServClassRuleMatchSrcL4PortEnd	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.20	InetPortNumber	read-create	Source layer 4 port range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcl4port(12).
MAC agentDiffServClassRuleMatchSrcMacAddr	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.21	MacAddress	read-create	Source MAC address match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcmac(13).
MAC agentDiffServClassRuleMatchSrcMacMask	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.22	MacAddress	read-create	Source MAC address mask match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to srcmac(13). This mask value identifies the portion of agentDiffServClassRuleMatchSrcMacAddr that is compared against a packet. A non-contiguous mask value is permitted.
U32 agentDiffServClassRuleMatchVlanId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.23	Unsigned32	read-create	VLAN ID match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlan(14). This object is obsoleted by agentDiffServClassRuleMatchVlanIdStart and agentDiffServClassRuleMatchVlanIdEnd.
T/F agentDiffServClassRuleMatchExcludeFlag	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.24	TruthValue	read-create	Class Rule exclude flag - when set to true(1), the match condition identified by agentDiffServClassRuleMatchEntryType is negated. This means that for a given field, every value is considered to be a match EXCEPT for the value specified in the class rule. This flag must be false(2) for an agendDiffServClassRuleMatchEntryType of refClass(10). This object must be set after the agentDiffServClassRuleMatchEntryType object, but before any other match object in this row
STO agentDiffServClassRuleStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.25	StorageType	read-create	Storage-type for this conceptual row
ROW agentDiffServClassRuleRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.26	RowStatus	read-create	The status of this conceptual row. All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
U32 agentDiffServClassRuleMatchCos2	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.27	Unsigned32	read-create	Three-bit user priority field in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame used as a class-match parameter - only valid if the agentDiffServClassRuleMatchEntryType is set to cos2(15).
INT agentDiffServClassRuleMatchEtypeKey	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.28	INTEGER	read-create	Ethertype keyword match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to etype(16). A keyword of custom(1) requires that the agentDiffServClassRuleMatchEtypeValue object also be set.
ETY agentDiffServClassRuleMatchEtypeValue	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.29	EtypeValue	read-create	Ethertype match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to etype(16) and the agentDiffServClassRuleMatchEtypeKey is set to custom(1). The allowed value for this object is 0x0600 to 0xFFFF.
U32 agentDiffServClassRuleMatchVlanIdStart	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.30	Unsigned32	read-create	VLAN ID range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame.
U32 agentDiffServClassRuleMatchVlanIdEnd	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.31	Unsigned32	read-create	VLAN ID range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid(17). The VLAN ID field is defined as the 12-bit VLAN identifier in the 802.1Q tag header of a tagged Ethernet frame. This is contained in the first/outer tag of a double VLAN tagged frame.
U32 agentDiffServClassRuleMatchVlanId2Start	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.32	Unsigned32	read-create	Secondary VLAN ID range start match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
U32 agentDiffServClassRuleMatchVlanId2End	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.33	Unsigned32	read-create	Secondary VLAN ID range end match value for the class - only valid if the agentDiffServClassRuleMatchEntryType is set to vlanid2(18). The Secondary VLAN ID field is defined as the 12-bit VLAN identifier in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame.
U32 agentDiffServClassRuleMatchFlowLabel	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.34	Unsigned32	read-create	Flow label is 20-bit number that is unique to an IPv6 packet, used by end stations to signify quality-of-service handling in routers.
ADR agentDiffServClassRuleMatchDstIpv6Prefix	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.35	Ipv6AddressPrefix	read-write	The Ipv6 Prefix Address configured on the Service Port.
ADR agentDiffServClassRuleMatchSrcIpv6Prefix	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.36	Ipv6AddressPrefix	read-write	The Ipv6 Prefix Address configured on the Service Port.
I32 agentDiffServClassRuleMatchDstIpv6PrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.37	Integer32	read-create	The Prefix Length.
I32 agentDiffServClassRuleMatchSrcIpv6PrefixLength	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.2.3.1.38	Integer32	read-create	The Prefix Length.
agentDiffServPolicyGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3
U32 agentDiffServPolicyIndexNextFree	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.1	Unsigned32	read-only	This object contains an unused value for agentDiffServPolicyIndex, or a zero to indicate that none exists.
agentDiffServPolicyTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2		not-accessible	A table of the DiffServ policy entries.
agentDiffServPolicyEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1		not-accessible	Represents entry for a DiffServ policy.
U32 agentDiffServPolicyIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.1	Unsigned32	not-accessible	The identifier for DiffServ Policy table entry.
STR agentDiffServPolicyName	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.2	DisplayString	read-create	Name of the policy
NUM agentDiffServPolicyType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.3	IntfDirection	read-create	The policy type dictates whether inbound or outbound policy attribute statements are used in the policy definition.
U32 agentDiffServPolicyInstIndexNextFree	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.4	Unsigned32	read-only	This object contains an unused value for agentDiffServPolicyInstIndex, or a zero to indicate that none exists. This index is maintained on a per-policy basis.
STO agentDiffServPolicyStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.5	StorageType	read-create	Storage-type for this conceptual row
ROW agentDiffServPolicyRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.2.1.6	RowStatus	read-create	The status of this conceptual row. active(1) - this Diffserv Policy is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyInstTable with corresponding values of agentDiffServPolicyIndex have been deleted.
agentDiffServPolicyInstTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3		not-accessible	A table of the policy-class instance entries.
agentDiffServPolicyInstEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1		not-accessible	Represents entry for a policy-class instance.
U32 agentDiffServPolicyInstIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1.1	Unsigned32	not-accessible	The identifier for policy-class Instance table entry within a policy.
U32 agentDiffServPolicyInstClassIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1.2	Unsigned32	read-create	Index of the DiffServ Class Table row, whose class definition is used as the policy class instance. The class index identifies the classifier definition used by the policy to establish an instance of that class (to which policy attributes can be attached). This is what connects a class (instance) to a policy.
U32 agentDiffServPolicyInstAttrIndexNextFree	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1.3	Unsigned32	read-only	This object contains an unused value for agentDiffServPolicyAttrIndex, or a zero to indicate that none exists. This index is maintained on a per-policy-class-instance basis.
STO agentDiffServPolicyInstStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1.4	StorageType	read-create	Storage-type for this conceptual row.
ROW agentDiffServPolicyInstRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.3.1.5	RowStatus	read-create	The status of this conceptual row. active(1) - this Diffserv Policy Instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'. Entries can not be deleted until all rows in agentDiffServPolicyAttrTable with corresponding values of agentDiffServPolicyIndex and agentDiffServPolicyInstIndex have been deleted.
agentDiffServPolicyAttrTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4		not-accessible	A table of policy attribute entries
agentDiffServPolicyAttrEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1		not-accessible	Represents entry for policy attributes
U32 agentDiffServPolicyAttrIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.1	Unsigned32	not-accessible	The identifier for policy-attribute entry
INT agentDiffServPolicyAttrStmtEntryType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.2	INTEGER	read-create	Policy attribute statement entry type -- this entry type is essential to determine which of the individual object(s) is defined for this policy attribute statement. This object must be created before any other policy attribute statement object in the row. The markIpDscpVal(4), markIpPrecedenceVal(5), policeSimple(6), policeSinglerate(7) and policeTworate(8) values are only allowed for an agentDiffServPolicyType of in(1). The remaining values are only allowed for an agentDiffServPolicyType of out(2).
U32 agentDiffServPolicyAttrStmtBandwidthCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.3	Unsigned32	read-create	Bandwidth committed rate attribute statement value -- identifies the minimum amount of bandwidth to be reserved for the specified class instance within the policy. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
INT agentDiffServPolicyAttrStmtBandwidthCrateUnits	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.4	INTEGER	read-create	Bandwidth committed rate units attribute statement value -- this value determines the interpretation of the agentDiffServPolicyAttrStmtBandwidthCrate object as either kilobits-per-second or as a percentage of interface link speed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to bandwidth(1).
U32 agentDiffServPolicyAttrStmtExpediteCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.5	Unsigned32	read-create	Expedited (bandwidth) committed rate attribute statement value -- it identifies the maximum guaranteed amount of bandwidth to be reserved for the specified class instance within the policy. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
INT agentDiffServPolicyAttrStmtExpediteCrateUnits	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.6	INTEGER	read-create	Expedited (bandwidth) committed rate units attribute statement value -- determines the interpretation of the agentDiffServPolicyAttrStmtExpediteCrate object as either kilobits-per-second or as a percentage of interface link speed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
QOS agentDiffServPolicyAttrStmtExpediteCburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.7	QosBurstSize	read-create	Expedited (bandwidth) committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to expedite(2).
U32 agentDiffServPolicyAttrStmtMarkCosVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.8	Unsigned32	read-create	Three-bit user priority field value in the 802.1Q tag header of a tagged Ethernet frame, marked as part of the inbound policy for a class instance. For frames containing a double VLAN tag, this field is located in the first/outer tag. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markCosVal(3).
U32 agentDiffServPolicyAttrStmtMarkIpDscpVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.9	Unsigned32	read-create	Specified IP DSCP value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markIpDscpVal(4).
U32 agentDiffServPolicyAttrStmtMarkIpPrecedenceVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.10	Unsigned32	read-create	Specified IP Precedence value to mark in all inbound packets belonging to the class-instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markIpPrecedenceVal(5).
INT agentDiffServPolicyAttrStmtPoliceConformAct	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.11	INTEGER	read-create	Policing conform action attribute statement value -- determines the action taken on conforming traffic for the policing style (simple,singlerate,tworate) currently configured for the specified class instance within the policy. The default conform action is send(3). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceConformVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.12	Unsigned32	read-create	Policing conform value attribute statement -- used to mark conforming packets when the conform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
INT agentDiffServPolicyAttrStmtPoliceExceedAct	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.13	INTEGER	read-create	Policing exceed action attribute statement value -- determines the action taken on excess traffic for the policing style (singlerate, tworate) currently configured for the specified class instance within the policy. The default exceed action is drop(1). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceExceedVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.14	Unsigned32	read-create	Policing exceed value attribute statement -- used to mark excess packets when the exceed action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8).
INT agentDiffServPolicyAttrStmtPoliceNonconformAct	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.15	INTEGER	read-create	Policing non-conform action attribute statement value -- determines the action taken on nonconforming traffic for the policing style (simple, singlerate,tworate) currently configured for the specified class instance within the policy. The default non-conform action is drop(1). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceNonconformVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.16	Unsigned32	read-create	Policing non-conform value attribute statement -- used to mark nonconforming packets when the nonconform action is one of the following: markdscp(2) - mark IP DSCP field markprec(3) - mark IP Precedence field markcos(5) - mark 802.1p CoS field (first/only tag) markcos2(6) - mark secondary 802.1p CoS field (inner tag) markcosAsSecCos(7) - mark CoS as Secondary CoS value This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceSimpleCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.17	Unsigned32	read-create	Simple policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
QOS agentDiffServPolicyAttrStmtPoliceSimpleCburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.18	QosBurstSize	read-create	Simple policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSimple(6).
U32 agentDiffServPolicyAttrStmtPoliceSinglerateCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.19	Unsigned32	read-create	Single-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
QOS agentDiffServPolicyAttrStmtPoliceSinglerateCburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.20	QosBurstSize	read-create	Single-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
QOS agentDiffServPolicyAttrStmtPoliceSinglerateEburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.21	QosBurstSize	read-create	Single-rate policing excess burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeSinglerate(7).
U32 agentDiffServPolicyAttrStmtPoliceTworateCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.22	Unsigned32	read-create	Two-rate policing committed rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
QOS agentDiffServPolicyAttrStmtPoliceTworateCburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.23	QosBurstSize	read-create	Two-rate policing committed burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceTworatePrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.24	Unsigned32	read-create	Two-rate policing peak rate attribute statement value, specified in kbps. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
QOS agentDiffServPolicyAttrStmtPoliceTworatePburst	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.25	QosBurstSize	read-create	Two-rate policing peak burst size attribute statement value, specified in Kbytes. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to policeTworate(8).
U32 agentDiffServPolicyAttrStmtRandomdropMinThresh	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.26	Unsigned32	read-create	Random drop minimum threshold attribute statement value -- the average queue depth minimum threshold in bytes used by the WRED algorithm. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
U32 agentDiffServPolicyAttrStmtRandomdropMaxThresh	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.27	Unsigned32	read-create	Random drop maximum threshold attribute statement value -- the average queue depth maximum threshold in bytes used by the WRED algorithm. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
U32 agentDiffServPolicyAttrStmtRandomdropMaxDropProb	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.28	Unsigned32	read-create	Random drop maximum drop probability attribute statement value -- the packet drop probability when the queue depth average reaches its maximum threshold. It is expressed as a percentage, and is an integer from 0 to 100. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
U32 agentDiffServPolicyAttrStmtRandomdropSamplingRate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.29	Unsigned32	read-create	Random drop sampling rate attribute statement value -- the period at which the queue depth is sampled for computing an average, expressed in microseconds. This value is an integer from 0 to 1000000, with a default value of 0 (meaning per packet sampling). This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
U32 agentDiffServPolicyAttrStmtRandomdropDecayExponent	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.30	Unsigned32	read-create	Random drop decay exponent attribute statement value -- determines how quickly the average queue length calculation decays over time, with a higher number causing a slower decay. This value is an integer from 0 to 16, with a default of 9. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to randomdrop(9).
U32 agentDiffServPolicyAttrStmtShapeAverageCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.31	Unsigned32	read-create	Average-rate shaping committed rate attribute statement value, specified in kbps -- used to establish average rate traffic shaping for the specified class , which limits transmissions for the class to the committed information rate, with any excess traffic delayed via queueing. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapeAverage(10).
U32 agentDiffServPolicyAttrStmtShapePeakCrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.32	Unsigned32	read-create	Peak-rate shaping committed rate attribute statement value, specified in kbps -- used to establish peak rate traffic shaping for the specified class , which allows transmissions for the class to exceed the committed information rate by sending excess traffic with the understanding that it could be dropped by a downstream network element. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapePeak(11).
U32 agentDiffServPolicyAttrStmtShapePeakPrate	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.33	Unsigned32	read-create	Peak-rate shaping peak rate attribute statement value, specified in kbps -- used to establish peak rate traffic shaping for the specified class, which allows transmissions for the class to exceed the committed information rate by sending excess traffic with the understanding that it could be dropped by a downstream network element. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to shapePeak(11).
STO agentDiffServPolicyAttrStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.34	StorageType	read-create	Storage-type for this conceptual row.
ROW agentDiffServPolicyAttrRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.35	RowStatus	read-create	The status of this conceptual row. active(1) - this Diffserv Policy Attribute is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
U32 agentDiffServPolicyAttrStmtAssignQueueId	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.36	Unsigned32	read-create	Queue identifier to which all inbound packets belonging to this class-instance are directed. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to assignQueue(12).
T/F agentDiffServPolicyAttrStmtDrop	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.37	TruthValue	read-only	Flag to indicate that all inbound packets belonging to this class-instance are dropped at ingress. This attribute is only valid if the agentDiffServPolicyAttrStmtEntryType is set to drop(13).
U32 agentDiffServPolicyAttrStmtMarkCos2Val	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.38	Unsigned32	read-create	Three-bit user priority field value in the second/inner 802.1Q tag header of a double VLAN tagged Ethernet frame, marked as part of the inbound policy for a class instance. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to markCos2Val(14).
U32 agentDiffServPolicyAttrStmtPoliceColorConformIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.39	Unsigned32	read-create	Index of the DiffServ Class Table row whose class definition is used to specify the policing color conform mode and value. This identifies incoming traffic categorized as 'green' packets in the network. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSimple(6), policeSinglerate(7), or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color conform mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object. A class index value of 0 for this object indicates conform color awareness is not being used (e.g. color-blind mode). Setting this object to 0 causes the agentDiffServPolicyAttrStmtPoliceColorExceedIndex object to be set to 0 as well.
INT agentDiffServPolicyAttrStmtPoliceColorConformMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.40	INTEGER	read-only	Policing color conform mode -- indicates the color awareness mode of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) denotes the packet field to check for the existing conform color marking, which is compared to the agentDiffServPolicyAttrStmtPoliceColorConformVal object value. Packets matching this specification are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceColorConformVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.41	Unsigned32	read-only	Policing color conform value -- indicates the color awareness packet mark value of conforming traffic for the policing style (simple, singlerate, or tworate) currently configured for the specified class instance within the policy. For the color conform field indicated by agentDiffServPolicyAttrStmtPoliceColorConformMode, packets containing this value are considered to be colored 'green'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorConformIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSimple(6), policeSinglerate(7), or policeTworate(8), and agentDiffServPolicyAttrStmtPoliceColorConformMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
U32 agentDiffServPolicyAttrStmtPoliceColorExceedIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.42	Unsigned32	read-create	Index of the DiffServ Class Table row whose class definition is used to specify the policing color exceed mode and value. This identifies incoming traffic categorized as 'yellow' packets in the network. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is policeSinglerate(7) or policeTworate(8). The DiffServ class referred to by this object must comply with the following restrictions: 1) Contains only a single, non-excluded match condition identifying one of the following fields: COS, IP DSCP, IP Precedence, or Secondary COS, in accordance with platform support capabilities. This is represented by an agentDiffServClassRuleMatchEntryType value of cos(1), ipdscp(6), ipprecedence(7), or cos2(15), respectively. 2) Must not conflict with any (non-excluded) match conditions in the classifier used for this policy-class instance, as indicated by the agentDiffServPolicyInstClassIndex object. 3) The color exceed mode and value identified by this class index must not be the same as an existing color-aware exceed mode and value defined by the agentDiffServPolicyAttrStmtPoliceColorConformIndex object. A class index value of 0 for this object indicates exceed color awareness is not being used. When the agentDiffServPolicyAttrStmtPoliceColorConformIndex object is 0, indicating color-blind operation, this object must also be 0. When a non-0 value is used for the agentDiffServPolicyAttrStmtPoliceColorConformIndex object, this object may remain set to 0 if exceed color awareness is not desired, or may be set to an appropriate class index value to activate exceed color aware mode.
INT agentDiffServPolicyAttrStmtPoliceColorExceedMode	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.43	INTEGER	read-only	Policing color exceed mode -- indicates the color awareness mode of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. The default value is blind(1). Any value other than blind(1) or unused(6) denotes the packet field to check for the existing exceed color marking, which is compared to the agentDiffServPolicyAttrStmtPoliceColorExceedVal object value. Packets matching this specification are considered to be colored 'yellow'. Use of exceed color awareness is optional, and this field is set to unused(6) when color conform aware policing is used but the color exceed value is not used. When agentDiffServPolicyAttrStmtPoliceColorConformMode value is blind(1), this object is blind(1) as well. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8).
U32 agentDiffServPolicyAttrStmtPoliceColorExceedVal	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.44	Unsigned32	read-only	Policing color exceed value -- indicates the color awareness packet mark value of exceeding traffic for the policing style (singlerate or tworate) currently configured for the specified class instance within the policy. For the color exceed field indicated by agentDiffServPolicyAttrStmtPoliceColorExceedMode, packets containing this value are considered to be colored 'yellow'. This read-only object reflects the DiffServ class definition as indicated by agentDiffServPolicyAttrStmtPoliceColorExceedIndex. This attribute is only valid for agentDiffServPolicyAttrStmtEntryType values of policeSinglerate(7) or policeTworate(8), and agentDiffServPolicyAttrStmtPoliceColorExceedMode values of cos(2), cos2(3), ipdscp(4), or ipprec(5).
NUM agentDiffServPolicyAttrStmtRedirectIntf	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.45	InterfaceIndex	read-create	External interface number to which all inbound packets belonging to this class-instance are redirected. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to redirect(15).
NUM agentDiffServPolicyAttrStmtMirrorIntf	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.46	InterfaceIndex	read-create	External interface number to which all inbound packets belonging to this class-instance are mirrored. This attribute is only valid if the value of agentDiffServPolicyAttrStmtEntryType is set to mirror(16).
T/F agentDiffServPolicyAttrStmtMarkCosAsSecCos	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.4.1.47	TruthValue	read-only	Flag to indicate that all inbound packets belonging to this class-instance are marked with secondary cos at ingress. This attribute is only valid if the agentDiffServPolicyAttrStmtEntryType is set to markCosAsSecCos(17).
agentDiffServPolicyPerfInTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5		not-accessible	A table of inbound policy-class performance entries
agentDiffServPolicyPerfInEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1		not-accessible	Represents entry for the performance attributes of the associated inbound policy-class instance
C32 agentDiffServPolicyPerfInOfferedOctetsEx	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.1	Counter32	read-only	Offered octets count for the inbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfInOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.2	Counter32	read-only	Offered packets count for the inbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfInDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.3	Counter32	read-only	Discarded octets count for the inbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfInDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.4	Counter32	read-only	Discarded packets count for the inbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfInHCOfferedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.5	Counter64	read-only	Offered octets high capacity count for the inbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfInHCOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.6	Counter64	read-only	Offered packets high capacity count for the inbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfInHCDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.7	Counter64	read-only	Discarded octets high capacity count for the inbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfInHCDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.8	Counter64	read-only	Discarded packets high capacity count for the inbound policy-class instance performance entry.
STO agentDiffServPolicyPerfInStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.9	StorageType	read-only	Storage-type for this conceptual row.
ROW agentDiffServPolicyPerfInRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.5.1.10	RowStatus	read-only	The status of this conceptual row.
agentDiffServPolicyPerfOutTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6		not-accessible	A table of outbound policy-class performance entries
agentDiffServPolicyPerfOutEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1		not-accessible	Represents entry for the performance attributes of the associated outbound policy-class instance
C32 agentDiffServPolicyPerfOutTailDroppedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.1	Counter32	read-only	Tail-dropped octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutTailDroppedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.2	Counter32	read-only	Tail-dropped packets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutRandomDroppedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.3	Counter32	read-only	Random-dropped octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutRandomDroppedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.4	Counter32	read-only	Random-dropped packets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutShapeDelayedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.5	Counter32	read-only	Shape-delayed octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutShapeDelayedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.6	Counter32	read-only	Shape-delayed packets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutSentOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.7	Counter32	read-only	Sent octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutSentPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.8	Counter32	read-only	Sent packets count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCTailDroppedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.9	Counter64	read-only	Tail-dropped octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCTailDroppedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.10	Counter64	read-only	Tail-dropped packets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCRandomDroppedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.11	Counter64	read-only	Random-dropped octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCRandomDroppedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.12	Counter64	read-only	Random-dropped packets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCShapeDelayedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.13	Counter64	read-only	Shape-delayed octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCShapeDelayedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.14	Counter64	read-only	Shape-delayed packets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCSentOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.15	Counter64	read-only	Sent octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCSentPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.16	Counter64	read-only	Sent packets high capacity count for the outbound policy-class instance performance entry.
STO agentDiffServPolicyPerfOutStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.17	StorageType	read-only	Storage-type for this conceptual row.
ROW agentDiffServPolicyPerfOutRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.18	RowStatus	read-only	The status of this conceptual row.
C32 agentDiffServPolicyPerfOutOfferedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.19	Counter32	read-only	Offered octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.20	Counter32	read-only	Offered packets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.21	Counter32	read-only	Discarded octets count for the outbound policy-class instance performance entry.
C32 agentDiffServPolicyPerfOutDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.22	Counter32	read-only	Discarded packets count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCOfferedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.23	Counter64	read-only	Offered octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.24	Counter64	read-only	Offered packets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.25	Counter64	read-only	Discarded octets high capacity count for the outbound policy-class instance performance entry.
C64 agentDiffServPolicyPerfOutHCDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.3.6.1.26	Counter64	read-only	Discarded packets high capacity count for the outbound policy-class instance performance entry.
agentDiffServServiceGroup	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4
agentDiffServServiceTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1		not-accessible	A table of the service entries.
agentDiffServServiceEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1		not-accessible	Represents entry for policy assigned to an interface in a particular direction.
NUM agentDiffServServiceIfIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.1	InterfaceIndex	not-accessible	External interface number of the interface to which policy is assigned.
NUM agentDiffServServiceIfDirection	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.2	IntfDirection	not-accessible	Interface direction to which the policy is assigned.
U32 agentDiffServServicePolicyIndex	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.3	Unsigned32	read-create	Index of the Policy Table row whose policy definition is attached to the interface in the specified direction.
INT agentDiffServServiceIfOperStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.4	INTEGER	read-only	The current operational state of the DiffServ service interface. If agentDiffServGenStatusAdminMode is disable(2) then agentDiffServServiceIfOperStatus should be down(2). If agentDiffServServiceGenStatusAdminMode is changed to enable(1) then agentDiffServServiceIfOperStatus should change to up(1) if the service interface is ready to send and receive DiffServ traffic; it should remain in the down(2) state if the underlying interface hardware is not in a link up condition, if the policy definition represented by agentDiffServServicePolicyIndex is incompatible with the interface (e.g., requires more bandwidth than the current capacity of the interface), or if the policy definition is considered to be incomplete (e.g., one or more composite rows is not in the active(1) state).
STO agentDiffServServiceStorageType	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.5	StorageType	read-create	Storage-type for this conceptual row
ROW agentDiffServServiceRowStatus	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.1.1.6	RowStatus	read-create	The status of this conceptual row. active(1) - Diffserv is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance All RowStatus operations are permitted. Other columns in this row may be modified when the status is 'active'.
agentDiffServServicePerfTable	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2		not-accessible	A table of service performance entries.
agentDiffServServicePerfEntry	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1		not-accessible	Represents a service performance entry.
C32 agentDiffServServicePerfOfferedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.1	Counter32	read-only	Offered octets count for the specified service interface and direction
C32 agentDiffServServicePerfOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.2	Counter32	read-only	Offered packets count for specified service interface and direction
C32 agentDiffServServicePerfDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.3	Counter32	read-only	Discarded octets count for the specified service interface and direction
C32 agentDiffServServicePerfDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.4	Counter32	read-only	Discarded packets count for the specified service interface and direction
C32 agentDiffServServicePerfSentOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.5	Counter32	read-only	Sent octets count for the specified service interface and direction
C32 agentDiffServServicePerfSentPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.6	Counter32	read-only	Sent packets count for the specified service interface and direction
C64 agentDiffServServicePerfHCOfferedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.7	Counter64	read-only	Offered octets high capacity count for the specified service interface and direction
C64 agentDiffServServicePerfHCOfferedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.8	Counter64	read-only	Offered packets high capacity count for the specified service interface and direction
C64 agentDiffServServicePerfHCDiscardedOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.9	Counter64	read-only	Discarded octets high capacity count for the specified service interface and direction
C64 agentDiffServServicePerfHCDiscardedPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.10	Counter64	read-only	Discarded packets high capacity count for the specified service interface and direction
C64 agentDiffServServicePerfHCSentOctets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.11	Counter64	read-only	Sent octets high capacity count for the specified service interface and direction
C64 agentDiffServServicePerfHCSentPackets	1.3.6.1.4.1.674.10895.5000.2.6132.1.1.3.7.4.2.1.12	Counter64	read-only	Sent packets high capacity count for the specified service interface and direction

RFC description

Broadcom DiffServ QoS MIB defining traffic classification, policy configuration, and performance measurement for service differentiation.

Start monitoring Broadcom FastPath-based Ethernet switch (multi-vendor OEM) (DiffServ QoS policy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FASTPATH-QOS-DIFFSERV-PRIVATE-MIB