H3C-FC-PSM-MIB

All MIBs › H3C-FC-PSM-MIB

Organization: Hangzhou H3C Tech. Co., Ltd.

Last Updated: 2013-10-17

Category: Fibre Channel and Storage, Vendor: H3C/HH3C

Description: H3C MIB for Fibre Channel Port Security Manager controlling authorized device access to FC switch ports.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is H3C-FC-PSM-MIB?

H3C-FC-PSM-MIB is an H3C-specific MIB for the Fibre Channel Port Security Manager (PSM) feature, which controls which devices are authorized to log into specific ports on an H3C Fibre Channel/FCoE switch. It exposes per-VSAN enable state for port security, a per-port security configuration table recording the type and identity of the device permitted to log in and its login point, and notification objects for security events. As a security/access-control monitoring MIB it is used to verify that unauthorized devices cannot log into protected FC ports and to alert (via h3cFcPsmNotifications) when a login violation is attempted, a fault/security-event monitoring use case rather than general hardware health. It builds on standard Fibre Channel VSAN/port concepts and would logically be used alongside FC-oriented MIBs, though no explicit MIB import dependency is named. It is typically deployed on H3C Fibre Channel or FCoE storage-network switches where administrators need to lock down which initiators/targets can attach to specific switch ports. Engineers can download the H3C-FC-PSM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in H3C-FC-PSM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

H3C Fibre Channel/FCoE storage-network switches

Monitoring Examples

An admin checks h3cFcPsmEnableTable / h3cFcPsmEnableEntry (keyed by h3cFcPsmEnableVsanIndex) to confirm h3cFcPsmEnable/h3cFcPsmEnableState is active for a given VSAN, then reviews h3cFcPsmConfigTable / h3cFcPsmConfigEntry entries showing h3cFcPsmLoginDevType, h3cFcPsmLoginDev, and h3cFcPsmLoginPoint to confirm only authorized devices are bound to each port. A h3cFcPsmNotifyEnable-triggered trap firing when an unrecognized device attempts login is the key fault-detection signal this MIB provides.

What Can Be Monitored

port security enable state per VSAN
authorized login device type/identity
port login-point bindings
unauthorized login attempt notifications

Imported Objects

From H3C-FC-TC-MIB

H3cFcNameIdOrZero

From H3C-VSAN-MIB

h3cSan

MODULE-IDENTITY

From IF-MIB

InterfaceIndex
InterfaceIndexOrZero
ifDescr	OBJECT-TYPE

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using h3cFcPsmAllowedLogins OID:

Select an H3C Fibre Channel/FCoE switch (Port Security Manager) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type h3cFcPsmAllowedLogins into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of requests that have been allowed on the specified VSAN. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
h3cFcPsm	1.3.6.1.4.1.2011.10.2.127.8			This MIB contains the objects for FC port security.
h3cFcPsmNotifications	1.3.6.1.4.1.2011.10.2.127.8.0
NTF h3cFcPsmFPortDenyNotify	1.3.6.1.4.1.2011.10.2.127.8.0.1			Notifies that a FLOGI is denied on an F port of the local device.
NTF h3cFcPsmEPortDenyNotify	1.3.6.1.4.1.2011.10.2.127.8.0.2			Notifies that a switch is denied on an E port of the local device.
h3cFcPsmObjects	1.3.6.1.4.1.2011.10.2.127.8.1
h3cFcPsmScalarObjects	1.3.6.1.4.1.2011.10.2.127.8.1.1
T/F h3cFcPsmNotifyEnable	1.3.6.1.4.1.2011.10.2.127.8.1.1.1	TruthValue	read-write	Whether to generate the notification or not depends on the object.
h3cFcPsmConfiguration	1.3.6.1.4.1.2011.10.2.127.8.1.2
h3cFcPsmEnableTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.1		not-accessible	Enable or disable the port security feature on a specified VSAN.
h3cFcPsmEnableEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.1.1		not-accessible	Detailed information about the port security.
U32 h3cFcPsmEnableVsanIndex	1.3.6.1.4.1.2011.10.2.127.8.1.2.1.1.1	Unsigned32	not-accessible	The ID of VSAN on this entry.
INT h3cFcPsmEnable	1.3.6.1.4.1.2011.10.2.127.8.1.2.1.1.2	INTEGER	read-write	When set to enable, the port security is on, the value of h3cFcPsmEnableState will be true. When set to enableWithAutoLearn, the port security is on with auto-learning, the value of h3cFcPsmEnableState will be true. When set to disable, the port security is off, the value of h3cFcPsmEnableState will be false. The noop means no action. The value of this object when read is always noop.
T/F h3cFcPsmEnableState	1.3.6.1.4.1.2011.10.2.127.8.1.2.1.1.3	TruthValue	read-only	The state of the port security. When the value is true, it means the port security is on, while the false means the port security is off.
h3cFcPsmConfigTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.2		not-accessible	A table that contains the configured entries.
h3cFcPsmConfigEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1		not-accessible	Detailed information about each configuration.
U32 h3cFcPsmIndex	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1.1	Unsigned32	not-accessible	The index of this entry.
H3C h3cFcPsmLoginDevType	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1.2	H3cFcPsmPortBindDevType	read-create	This represents the type of the instance of h3cFcPsmLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
H3C h3cFcPsmLoginDev	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1.3	H3cFcNameIdOrZero	read-create	The logging-in device name, which is decided by the h3cFcPsmLoginDevType object. It represents node WWN when the value of h3cFcPsmLoginDevType is nWWN. It represents port WWN when the value of h3cFcPsmLoginDevType is pWWN. It represents switch WWN when the value of h3cFcPsmLoginDevType is sWWN. It represents any device when the value of h3cFcPsmLoginDevType is wildCard, and the value of the instance of this object should be zero-length string. The value of this object should not be invalid when h3cFcPsmRowStatus is set to createAndGo or active.
NUM h3cFcPsmLoginPoint	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1.4	InterfaceIndexOrZero	read-create	The address of the port on the local switch through which the instance of h3cFcPsmLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
ROW h3cFcPsmRowStatus	1.3.6.1.4.1.2011.10.2.127.8.1.2.2.1.5	RowStatus	read-create	Entry status. When creating a new instance of this table, the following objects should be set simultaneously: h3cFcPsmLoginDevType, h3cFcPsmLoginDev, h3cFcPsmLoginPoint, h3cFcPsmRowStatus. If h3cFcPsmLoginDevType is set to wildCard, the value of the instance of h3cFcPsmLoginDev should be zero-length string. The value of h3cFcPsmLoginDevType and h3cFcPsmLoginPoint cannot be set to wildCard and zero at the same time.
h3cFcPsmEnfTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.3		not-accessible	The FC port security enforced table. It contains not only the configured policies, but also the learning ones learnt by the switch itself.
h3cFcPsmEnfEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1		not-accessible	Detailed information about the FC port security enforced policy.
U32 h3cFcPsmEnfIndex	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1.1	Unsigned32	not-accessible	The index of this entry.
H3C h3cFcPsmEnfLoginDevType	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1.2	H3cFcPsmPortBindDevType	read-only	This represents the type of the instance of h3cFcPsmEnfLoginDev, which includes nWWN, pWWN, sWWN, and wildCard.
H3C h3cFcPsmEnfLoginDev	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1.3	H3cFcNameIdOrZero	read-only	The logging-in device name, which is decided by the h3cFcPsmEnfLoginDevType object. It represents node WWN when the value of h3cFcPsmEnfLoginDevType is nWWN. It represents port WWN when the value of h3cFcPsmEnfLoginDevType is pWWN. It represents switch WWN when the value of h3cFcPsmEnfLoginDevType is sWWN. It represents any device when the value of h3cFcPsmEnfLoginDevType is wildCard, and the value of the instance of this object should be zero-length string.
NUM h3cFcPsmEnfLoginPoint	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1.4	InterfaceIndexOrZero	read-only	The address of the port on the local switch through which the instance of h3cFcPsmEnfLoginDev can log in. It represents ifindex when the value is not zero. It represents any port when the value is zero.
INT h3cFcPsmEnfEntryType	1.3.6.1.4.1.2011.10.2.127.8.1.2.3.1.5	INTEGER	read-only	When the value is learning, it represents the entry is learnt by the switch itself temporarily and will be deleted when the device log out. When the value is learnt, it represents the entry is learnt by the switch permanently. When the value is static, it represents the entry is configured.
h3cFcPsmCopyToConfigTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.4		not-accessible	Specifies whether to copy the entries from enforced table to the ones on configured table.
h3cFcPsmCopyToConfigEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.4.1		not-accessible	Detailed information about the operation.
INT h3cFcPsmCopyToConfig	1.3.6.1.4.1.2011.10.2.127.8.1.2.4.1.1	INTEGER	read-write	When the object is set to copy, the learned entries will be copied on to the configured table on this VSAN, while the noop means no operation. The value of this object when read is always noop.
h3cFcPsmAutoLearnTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.5		not-accessible	This table shows whether the auto-learning is enabled or not on specific VSANs.
h3cFcPsmAutoLearnEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.5.1		not-accessible	Detailed information about the auto-learning.
T/F h3cFcPsmAutoLearnEnable	1.3.6.1.4.1.2011.10.2.127.8.1.2.5.1.1	TruthValue	read-write	This object is set to true to enable, or false to disable auto-learning on the local switch. When set to true, the switch can learn the devices that have already logged in as learning entries on the enforced table, while the false can stop the learning operation with the learning entries transformed to learnt ones.
h3cFcPsmClearTable	1.3.6.1.4.1.2011.10.2.127.8.1.2.6		not-accessible	This table is used for cleaning specific entries in enforced table.
h3cFcPsmClearEntry	1.3.6.1.4.1.2011.10.2.127.8.1.2.6.1		not-accessible	Detailed information about the cleaning options.
H3C h3cFcPsmClearType	1.3.6.1.4.1.2011.10.2.127.8.1.2.6.1.1	H3cFcPsmClearEntryType	read-write	This object when set to clearStatic, results in port bind static entries being cleared on this VSAN. This object when set to clearAutoLearn, results in auto-learnt entries being cleared on this VSAN. This object when set to clearAll, results in all of the port bind entries being cleared on this VSAN. No action is taken if this object is set to noop. The value of this object when read is always noop.
NUM h3cFcPsmClearIntf	1.3.6.1.4.1.2011.10.2.127.8.1.2.6.1.2	InterfaceIndexOrZero	read-write	The object specifies the interface on which the entries will be cleared. If the object is zero or not set, it means the specified entries on all interfaces will be cleared.
h3cFcPsmStats	1.3.6.1.4.1.2011.10.2.127.8.1.3
h3cFcPsmStatsTable	1.3.6.1.4.1.2011.10.2.127.8.1.3.1		not-accessible	This table contains statistics of devices, which had been allowed or denied to log into the switch.
h3cFcPsmStatsEntry	1.3.6.1.4.1.2011.10.2.127.8.1.3.1.1		not-accessible	Detailed information about the statistics.
C32 h3cFcPsmAllowedLoginsEx	1.3.6.1.4.1.2011.10.2.127.8.1.3.1.1.1	Counter32	read-only	The number of requests that have been allowed on the specified VSAN.
C32 h3cFcPsmDeniedLogins	1.3.6.1.4.1.2011.10.2.127.8.1.3.1.1.2	Counter32	read-only	The number of requests that have been denied on the specified VSAN.
INT h3cFcPsmStatsClear	1.3.6.1.4.1.2011.10.2.127.8.1.3.1.1.3	INTEGER	read-write	The statistics on this VSAN will be cleared if this object is set to clear. No action is taken if this object is set to noop. The value of this object when read is always noop.
h3cFcPsmViolationTable	1.3.6.1.4.1.2011.10.2.127.8.1.3.2		not-accessible	This table maintains the information about the violations happened, containing at most 1024 items. When the number exceeds 1024, the earliest item will be over-written.
h3cFcPsmViolationEntry	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1		not-accessible	Detailed information about the violation.
U32 h3cFcPsmViolationIndex	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.1	Unsigned32	not-accessible	The index of this entry. The entry is uniquely distinguished by WWN, WWN type and ifindex where the login was denied.
H3C h3cFcPsmLoginPWWN	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.2	H3cFcNameIdOrZero	read-only	The pWWN of the device whose FLOGI(Fabric Login) request had been denied. If the device is an n-node, the value of the instance of h3cFcPsmLoginSWWN should be zero-length string.
H3C h3cFcPsmLoginNWWN	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.3	H3cFcNameIdOrZero	read-only	The nWWN of the device whose FLOGI request had been denied. If the device is an n-node, the value of the instance of h3cFcPsmLoginSWWN should be zero-length string.
H3C h3cFcPsmLoginSWWN	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.4	H3cFcNameIdOrZero	read-only	The sWWN of the device whose FLOGI request had been denied. If the device is a switch, the values of the instance of h3cFcPsmLoginPWWN and h3cFcPsmLoginNWWN should be zero-length string.
NUM h3cFcPsmLoginIntf	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.5	InterfaceIndex	read-only	The ifindex of the port where the login was denied.
TIM h3cFcPsmLoginTime	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.6	TimeStamp	read-only	Specifies the value of SysUpTime when the last denied login happened.
C32 h3cFcPsmLoginCount	1.3.6.1.4.1.2011.10.2.127.8.1.3.2.1.7	Counter32	read-only	The number of times for a certain nWWN/pWWN or sWWN had been denied to log into an interface of the local device.

RFC description

Manages Fibre Channel port security including port binding, device authentication and access control for H3C SANs.

Start monitoring H3C Fibre Channel/FCoE switch (Port Security Manager) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download H3C-FC-PSM-MIB