All MIBs › LSI-megaRAID-SAS-IR-MIB
Description: LSI-megaRAID-SAS-IR-MIB module
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is LSI-megaRAID-SAS-IR-MIB?
This MIB is a proprietary module from LSI Corporation (now part of Broadcom) for the MegaRAID SAS Integrated RAID (IR) family of hardware RAID controllers used in servers and storage systems. It exposes agent/host identification data, adapter inventory, and RAID-specific operational parameters such as rebuild and reconstruction rates and alarm state. It is explicitly used to monitor hardware status of the storage subsystem: adapter presence and properties, RAID rebuild/reconstruction progress after a disk failure or replacement, and audible/visual alarm state signaling a fault condition, giving administrators an early warning of degraded array health. As a hardware-vendor RAID agent MIB it generally stands alone as a self-contained management interface rather than depending on other standard MIBs, though it is often deployed alongside general host/OS MIBs (e.g., HOST-RESOURCES-MIB) for full server visibility. It is typically deployed on servers equipped with LSI/Broadcom MegaRAID SAS controllers, monitored via an SNMP subagent bundled with the RAID management software stack. Network engineers evaluating or troubleshooting this functionality can download the LSI-megaRAID-SAS-IR-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in LSI-megaRAID-SAS-IR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- server with LSI/Broadcom MegaRAID SAS RAID controller
Monitoring Examples
An administrator polling adapterPropertiesTable by adpNumber can retrieve per-controller identification and configuration, while rebuildRate and reconstructionRate reveal whether a degraded RAID array is actively rebuilding after a drive replacement and how quickly. alarmState indicates whether the controller has raised a hardware fault or predictive-failure alarm, which combined with hostOSInfo and mibVersion helps correlate the alert with the specific host and controller firmware/agent version in a support ticket.
What Can Be Monitored
- RAID rebuild rate
- RAID reconstruction rate
- controller alarm state
- adapter/controller inventory
- agent and firmware version
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| enterprises |
From RFC1213-MIB
| DisplayString | |
| PhysAddress |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| lsi | 1.3.6.1.4.1.3582 | |||
| lsiStorageComponents | 1.3.6.1.4.1.3582.5 | |||
| lsiRAIDServer | 1.3.6.1.4.1.3582.5.1 | |||
| STR hostName | 1.3.6.1.4.1.3582.5.1.1 | DisplayString | read-only | Name of the host system. |
| STR hostOSInfo | 1.3.6.1.4.1.3582.5.1.2 | DisplayString | read-only | Operating System description where SNMP agent is running. |
| versionInfo | 1.3.6.1.4.1.3582.5.1.3 | |||
| STR mibVersion | 1.3.6.1.4.1.3582.5.1.3.1 | DisplayString | read-only | The MIB version no. (xx.yy.zz) |
| STR agentModuleName | 1.3.6.1.4.1.3582.5.1.3.2 | DisplayString | read-only | The agent module name |
| STR agentModuleVersion | 1.3.6.1.4.1.3582.5.1.3.3 | DisplayString | read-only | The module version in xx.yy format. Where xx is the major version number and yy is the minor version number(without build information). |
| STR releaseDate | 1.3.6.1.4.1.3582.5.1.3.4 | DisplayString | read-only | Module Release Date (DD/MM/YYYY) |
| megaRAID_SAS_IR | 1.3.6.1.4.1.3582.5.1.4 | |||
| adapter | 1.3.6.1.4.1.3582.5.1.4.1 | |||
| adapterDetails | 1.3.6.1.4.1.3582.5.1.4.1.1 | |||
| GAU adpNumber | 1.3.6.1.4.1.3582.5.1.4.1.1.1 | Gauge | read-only | The total no of SAS adapters present. |
| adapterPropertiesTable | 1.3.6.1.4.1.3582.5.1.4.1.1.2 | not-accessible | A List of adapter Entries containing Information/Properties about the adapters. | |
| adapterPropertiesEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1 | not-accessible | An Entry in the adapter table. | |
| INT adapterID | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.1 | INTEGER | read-only | AdapterID for this Adapter.(Unique) |
| INT rebuildRate | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.2 | INTEGER | read-only | Rebuild rate on this Adapter. |
| INT reconstructionRate | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.3 | INTEGER | read-only | Reconstruction rate on this Adapter. |
| INT alarmState | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.4 | INTEGER | read-only | Alarm is enabled(1) or disabled(0) on this adapter. |
| INT cacheFlushInterval | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.5 | INTEGER | read-only | Cache flush interval in seconds for this adapter. |
| INT clusterState | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.6 | INTEGER | read-only | Cluster is enabled(1) or disabled(0) on this adapter. |
| INT predFailPollInterval | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.7 | INTEGER | read-only | Number of seconds between predictive fail polls on this adapter. |
| INT intThrottleCount | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.8 | INTEGER | read-only | Interrupt throttle active count on this adapter. |
| INT intThrottleTimeUs | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.9 | INTEGER | read-only | Interrupt throttle completion hold time on this adapter. |
| INT patrolReadRate | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.10 | INTEGER | read-only | Patrol Read Rate for this adapter. |
| INT bgiRate | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.11 | INTEGER | read-only | Background initialization rate for this adapter. |
| INT ccRate | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.12 | INTEGER | read-only | Consistency Check rate on this Adapter. |
| INT spinupDelay | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.13 | INTEGER | read-only | Number of seconds to delay among spinup groups for this adapter. |
| INT spinupDriveCount | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.14 | INTEGER | read-only | Maximum number of drives to spin up at one time for this adapter. |
| INT coercionMode | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.15 | INTEGER | read-only | Drive capacity coercion mode. 0->None; 1->128MB; 2->1GB; 3->Adaptive Coercion. |
| INT disableAutoRebuild | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.16 | INTEGER | read-only | auto-rebuild and hot-spare commissioning status. 1->Disable , 0->Enable |
| INT disableBatteryWarning | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.17 | INTEGER | read-only | disable/enable warnings for missing battery or missing HW status. 1->Disable , 0->Enable |
| INT multipathSupport | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.18 | INTEGER | read-only | Multipath is supported or not supported on this adapter.Values: not supported(0),supported(1) |
| INT ssdSMARTerEnabled | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.19 | INTEGER | read-only | Copyback to SSD on SMART error. Values Enabled(0),Disabled(1) |
| STR sasAddr | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.20 | DisplayString | read-only | This field gives the controller SAS address |
| STR auxilaryPowerPresent | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.21 | DisplayString | read-only | Presence of Auxilary Power |
| STR ddLifeCurveStatus | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.22 | DisplayString | read-only | Check for throttling |
| STR ddSSDLifeLeft | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.23 | DisplayString | read-only | Percentage of SSD life left |
| STR dDStatus | 1.3.6.1.4.1.3582.5.1.4.1.1.2.1.24 | DisplayString | read-only | Overall DD status |
| adapterInfoTable | 1.3.6.1.4.1.3582.5.1.4.1.1.3 | not-accessible | A List of adapter Entries containing Information/Properties about the adapters. | |
| adapterInfoEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1 | not-accessible | An Entry in the adapterInfo table. | |
| INT infAdpID | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.1 | INTEGER | read-only | AdapterID for this Adapter.(Unique) |
| INT vendorID | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.2 | INTEGER | read-only | PCI Vendor ID for this Adapter. |
| INT devId | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.3 | INTEGER | read-only | PCI Device ID for this Adapter. |
| INT subVendorID | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.4 | INTEGER | read-only | PCI Sub-Vendor ID for this adapter. |
| INT subDevID | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.5 | INTEGER | read-only | PCI Sub-Device ID for this adapter. |
| INT hostInterface | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.6 | INTEGER | read-only | Host interface information for this adapter. Values are as follows: N/A(0), PCIX(1), PCIE(2), iSCSI(3), SAS_3G(4) |
| INT hostInterfacePortCnt | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.7 | INTEGER | read-only | Port Count on this adapter. |
| STR hostInterfacePortAddr | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.8 | DisplayString | read-only | Port address comma delimited |
| STR devInterface | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.9 | DisplayString | read-only | Multiple device interface support values separated by space. |
| INT devInterfacePortCnt | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.10 | INTEGER | read-only | Device Port Count on this adapter. |
| STR devInterfacePortAddr | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.11 | DisplayString | read-only | Device Port address comma delimited |
| STR productName | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.12 | DisplayString | read-only | Product name e.g. SAS2008 B1. |
| STR serialNo | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.13 | DisplayString | read-only | Controller serial number |
| STR firmwareVersion | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.14 | DisplayString | read-only | Firmware version Format->(Firmware Package Version:Version:Date:Time) |
| STR driverVersion | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.15 | DisplayString | read-only | Driver version Format->(Driver Name:Version) |
| INT nvramSize | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.16 | INTEGER | read-only | NVRAM size in KB for this adapter.A value -1 for invalid or undefined size. |
| INT memorySize | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.17 | INTEGER | read-only | Memory size in MB for this adapter.A value -1 for invalid or undefined size. |
| INT flashSize | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.18 | INTEGER | read-only | Flash size in MB for this adapter.A value -1 for invalid or undefined size. |
| INT vdPresentCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.19 | INTEGER | read-only | Virtual devices present in this adapter. |
| INT vdDegradedCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.20 | INTEGER | read-only | Number of virtual devices in this adapter that are critical |
| INT vdOfflineCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.21 | INTEGER | read-only | Number of virtual devices in this adapter that are offline |
| INT pdPresentCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.22 | INTEGER | read-only | Physical devices present in this adapter. |
| INT pdDiskPresentCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.23 | INTEGER | read-only | Physical disk devices present in this adapter. |
| INT pdDiskPredFailureCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.24 | INTEGER | read-only | Number of disk devices in this adapter that are critical |
| INT pdDiskFailedCount | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.25 | INTEGER | read-only | Number of disk devices in this adapter that are failed |
| INT clusterStatus | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.26 | INTEGER | read-only | Cluster state on this adapter. Values: ACTIVE(1), INACTIVE(0) |
| INT devInterfaceType | 1.3.6.1.4.1.3582.5.1.4.1.1.3.1.27 | INTEGER | read-only | Type of the interface of the IR adapter. Values: GEN1(0), GEN2(1) |
| adapterSupportInfoTable | 1.3.6.1.4.1.3582.5.1.4.1.1.4 | not-accessible | A List of Entries containing Properties supported by the Controller. | |
| adapterSupportInfoEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1 | not-accessible | An Entry in the adapter table. | |
| INT suAdpID | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.1 | INTEGER | read-only | AdapterID for this Adapter.(Unique) |
| INT supportMaxArms | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.2 | INTEGER | read-only | Maximum arms per Logical Drive supported for this Adapter. |
| INT supportMaxSpans | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.3 | INTEGER | read-only | Maximum spans per Logical Drive supported for this Adapter. |
| INT supportMaxArrays | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.4 | INTEGER | read-only | Maximum number arrays supported this Adapter. |
| INT supportMaxLDs | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.5 | INTEGER | read-only | Maximum number of Logical Drive's supported for this Adapter. |
| STR supportHardwarePresent | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.6 | DisplayString | read-only | Supported Hardware on this adapter. bbu(1),alarm(2),nvram(3),uart(4). For multiple hardware support a comma delimited list will appear. |
| INT supportMaxConcurrentCmds | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.7 | INTEGER | read-only | The maximum parallel commands supported on this Adapter. |
| INT supportMaxSGECount | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.8 | INTEGER | read-only | The maximum Scatter Gather Element count allowed on this Adapter. |
| INT supportMaxRequestSize | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.9 | INTEGER | read-only | The maximum data transfer size in sectors, on this Adapter. |
| INT supportClusterPermitted | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.10 | INTEGER | read-only | Clustering support on this Adapter. Values: FALSE(0), TRUE(1) |
| INT supportMinStripeSize | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.11 | INTEGER | read-only | Minimum stripe size supported. 0(512),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| INT supportMaxStripeSize | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.12 | INTEGER | read-only | Maximum stripe size supported. 0(512),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| INT supportSupportsSAS | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.13 | INTEGER | read-only | SAS physical drive support.Values: notSupported(0), supported(1) |
| INT supportSupportsSATA | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.14 | INTEGER | read-only | SATA physical drive support.Values: notSupported(0), supported(1) |
| INT supportAllowMixInEnclosure | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.15 | INTEGER | read-only | Mix InEnclosure support.Values: notSupported(0), supported(1) |
| INT supportAllowMixInVD | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.16 | INTEGER | read-only | MixInVD support.Values: notSupported(0), supported(1) |
| INT supportAllowSataInCluster | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.17 | INTEGER | read-only | SataInCluster support. Values: notSupported(0), supported(1) |
| INT allowSSDMixInLD | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.18 | INTEGER | read-only | allow SAS/SATA SSD mix within an LD. allow(1), not allow(0) |
| INT allowMixSSDHDDInLD | 1.3.6.1.4.1.3582.5.1.4.1.1.4.1.19 | INTEGER | read-only | allow SSD/HDD mix within an LD.allow(1), not allow(0) |
| adpOperationsSupportInfoTable | 1.3.6.1.4.1.3582.5.1.4.1.1.5 | not-accessible | A List of Entries containing operations supported by the Controller. | |
| adpOperationsSupportInfoEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1 | not-accessible | An Entry in the adapter table. | |
| INT opAdpID | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.1 | INTEGER | read-only | AdapterID for this Adapter.(Unique) |
| INT rbldRate | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.2 | INTEGER | read-only | Rebuilding rate change support for this Adapter. Values: False(0), True(1) |
| INT suCCRate | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.3 | INTEGER | read-only | Consistency Check rate change support for this Adapter. Values: False(0), True(1) |
| INT suBgiRate | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.4 | INTEGER | read-only | Background initialization rate change support for this adapter. Values: False(0), True(1) |
| INT reconRate | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.5 | INTEGER | read-only | Reconstruction rate change support for this adapter. Values: False(0), True(1) |
| INT patrolRate | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.6 | INTEGER | read-only | Patrol read rate change support for this adapter. Values: False(0), True(1) |
| INT alarmControl | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.7 | INTEGER | read-only | Alarm control support for this adapter. Values: False(0), True(1) |
| INT clusterSupported | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.8 | INTEGER | read-only | Cluster support for this adapter. Values: False(0), True(1) |
| INT bbu | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.9 | INTEGER | read-only | BBU support for this adapter. Values: False(0), True(1) |
| INT spanningAllowed | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.10 | INTEGER | read-only | Spanning support for this adapter. Values: False(0), True(1) |
| INT dedicatedHotSpares | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.11 | INTEGER | read-only | Dedicated HotSpares for this adapter. Values: False(0), True(1) |
| INT revertibleHotSpares | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.12 | INTEGER | read-only | Revertible HotSpares support for this adapter. Values: False(0), True(1) |
| INT foreignConfigImport | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.13 | INTEGER | read-only | Support foreign config import on this adapter. Values: False(0), True(1) |
| INT selfDiagnostic | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.14 | INTEGER | read-only | Controller supports self diagnostic. Values: False(0), True(1) |
| INT allowMixedRedundancyOnArray | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.15 | INTEGER | read-only | Allow different Virtual Disk on the same array to have different redundancy levels Values: False(0), True(1) |
| INT globalHotSpares | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.16 | INTEGER | read-only | Global hot spares are supported. Values: False(0), True(1) |
| INT oceWithNoDriveAddition | 1.3.6.1.4.1.3582.5.1.4.1.1.5.1.17 | INTEGER | read-only | Online Capacity Expansion supported. Values: False(0), True(1) |
| driveOperationSupportTable | 1.3.6.1.4.1.3582.5.1.4.1.1.6 | not-accessible | A List of operations supported by Physical Drive. | |
| driveOperationSupportEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.6.1 | not-accessible | An Entry in the driveOperationSupport table. | |
| INT drvAdpID | 1.3.6.1.4.1.3582.5.1.4.1.1.6.1.1 | INTEGER | read-only | Unique adapter ID |
| INT forceOnline | 1.3.6.1.4.1.3582.5.1.4.1.1.6.1.2 | INTEGER | read-only | Physical Drive force Online operation support Values: notSupported(0), supported(1) |
| INT forceOffline | 1.3.6.1.4.1.3582.5.1.4.1.1.6.1.3 | INTEGER | read-only | Physical Drive force Offline operation support Values: notSupported(0), supported(1) |
| INT forceRebuild | 1.3.6.1.4.1.3582.5.1.4.1.1.6.1.4 | INTEGER | read-only | Physical Drive force Rebuild operation support Values: notSupported(0), supported(1) |
| vdOperationSupportTable | 1.3.6.1.4.1.3582.5.1.4.1.1.7 | not-accessible | A List operations supported by Virtual Drive | |
| vdOperationSupportEntry | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1 | not-accessible | An Entry in the vdOperationSupport Table. | |
| INT vdOpAdpID | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.1 | INTEGER | read-only | Unique adapter ID |
| INT readPolicy | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.2 | INTEGER | read-only | Read policy support. Values: False(0), True(1) |
| INT writePolicy | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.3 | INTEGER | read-only | Write policy support. Values: False(0), True(1) |
| INT ioPolicy | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.4 | INTEGER | read-only | IO policy support. Values: False(0), True(1) |
| INT accessPolicy | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.5 | INTEGER | read-only | Access policy support. Values: False(0), True(1) |
| INT diskCachePolicy | 1.3.6.1.4.1.3582.5.1.4.1.1.7.1.6 | INTEGER | read-only | Disk Cache Policy support. Values: False(0), True(1) |
| bbuInfo | 1.3.6.1.4.1.3582.5.1.4.1.2 | |||
| GAU bbuNumber | 1.3.6.1.4.1.3582.5.1.4.1.2.1 | Gauge | read-only | The present number of rows in the bbuTable. |
| bbuTable | 1.3.6.1.4.1.3582.5.1.4.1.2.2 | not-accessible | A List of bbu Entries containing Information/Properties about the BBU. | |
| bbuEntry | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1 | not-accessible | An Entry in the BBU table. | |
| INT bbuID | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.1 | INTEGER | read-only | BBUID for this BBU.(Unique) |
| INT batteryType | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.2 | INTEGER | read-only | BBU Type: Values: n/a(0), ibbu(1), bbu(2), zcr_legacy(3), itbbu3(4) |
| INT nextLearnTime | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.3 | INTEGER | read-only | Time of next scheduled lean cycle (seconds path 1/1/2000) |
| INT absStateOfCharge | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.4 | INTEGER | read-only | Predicted remaining capacity expressed as % of DesignCapacity() (0-100). Value of -1 means not supported |
| INT fullChargeCapacity | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.5 | INTEGER | read-only | Predicted pack capacity when it is fully charged in mAh |
| INT averageEmptyTime | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.6 | INTEGER | read-only | One-minute rolling average of the predicted remaining battery life. Value of -1 means not supported |
| INT cycleCount | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.7 | INTEGER | read-only | Number of charge cycles the battery has experienced. Value of -1 means not supported |
| STR firmwareStatus | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.8 | DisplayString | read-only | condition of battery in following order: packMissing(0/1) voltageLow(0/1) temperatureHigh(0/1) chargeActive(0/1) dischargeActive(0/1) learnCycleRequested(0/1) learnCycleActive(0/1) learnCycleFailed(0/1) learnCycleTimeout(0/1) i2cErrorsDetected(0/1) Only enabled(1) values will be shown |
| INT voltage | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.9 | INTEGER | read-only | Accurate battery terminal voltage in mV, resolution of 1mV |
| INT autoLearnPeriod | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.10 | INTEGER | read-only | Time (in seconds) between learn cycles (0 to disable auto learn) |
| INT relStateOfCharge | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.11 | INTEGER | read-only | Predicted remaining capacity expressed as % of FullChargeCapacity() (0-100). Value of -1 means not supported |
| INT capacityRemain | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.12 | INTEGER | read-only | Predicted charge or energy remaining in the battery in mAh |
| INT runTimeToEmpty | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.13 | INTEGER | read-only | (in minutes)Relative gain or loss in remaining life in response to change in power policy. Value of -1 means not supported |
| INT avgTimeToFull | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.14 | INTEGER | read-only | One-minute rolling average of predicted remaining time to full charge. Value of -1 means not supported |
| INT errorMargin | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.15 | INTEGER | read-only | Expected margin of error (%) in charge calculation (2-100). Value of -1 means not supported |
| INT temperature | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.16 | INTEGER | read-only | Battery temperature in degree Centigrade |
| STR mfgName | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.17 | DisplayString | read-only | Battery manufacturer's name |
| STR deviceName | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.18 | DisplayString | read-only | Battery name |
| STR serialNumber | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.19 | DisplayString | read-only | Battery serialNumber |
| INT chargerStatus | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.20 | INTEGER | read-only | Battery charger status. Values: N/A(-1), off(0), complete(1), progress(2) |
| INT adpID | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.21 | INTEGER | read-only | The adapter id where BBU is attached |
| INT remainingCapAlarm | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.22 | INTEGER | read-only | Remaining capacity to alarm. Value of -1 means not supported |
| INT remainingTimeAlarm | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.23 | INTEGER | read-only | Remaining time to alarm. Value of -1 means not supported |
| INT bbu_current | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.24 | INTEGER | read-only | Current(In mA) being supplied (or accepted) through the terminals of the battery |
| INT gasGaugeStatus | 1.3.6.1.4.1.3582.5.1.4.1.2.2.1.25 | INTEGER | read-only | Gas guage status |
| device | 1.3.6.1.4.1.3582.5.1.4.2 | |||
| physicalDriveInfo | 1.3.6.1.4.1.3582.5.1.4.2.1 | |||
| GAU pdNumber | 1.3.6.1.4.1.3582.5.1.4.2.1.1 | Gauge | read-only | The present number of rows in the physicalDrive table. |
| pdTable | 1.3.6.1.4.1.3582.5.1.4.2.1.2 | not-accessible | A List of physicalDrive Entries containing Information/Properties about the drives | |
| pdEntry | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1 | not-accessible | An Entry in the Device Table. | |
| INT pdIndex | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.1 | INTEGER | read-only | The unique ID |
| INT physDevID | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.2 | INTEGER | read-only | The Device ID |
| INT oemSupported | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.3 | INTEGER | read-only | Drive support by the OEM (OEM-specific checks) Values: notSupported(1), supported(0) |
| INT scsiDevType | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.4 | INTEGER | read-only | Type of this Device. Values: disk(0), tape(1), printer(2), processor(3), cdrom(5), scanner(6), optical(7), enclosure(13), dvd(10), unknown(31) |
| INT connectedAdapterPort | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.5 | INTEGER | read-only | Adapter port to which the device is connected. |
| INT deviceSpeed | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.6 | INTEGER | read-only | Maximum supported speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2),speed_6G(3) |
| INT mediaErrCount | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.7 | INTEGER | read-only | Error count of the device |
| INT otherErrCount | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.8 | INTEGER | read-only | other error count of the device |
| INT predFailCount | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.9 | INTEGER | read-only | Predictive fail count of the device |
| INT pdState | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.10 | INTEGER | read-only | Firmware's interpretation of drive state. Values: unconfigured_good(0), unconfigured_bad(1), hot_spare(2), offline(16), failed(17), rebuild(20), online(24),copyback(32),system(64) |
| INT disabledForRemoval | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.11 | INTEGER | read-only | If true, drive is ready for removal. Values: false(0), true(1) |
| INT linkSpeed | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.12 | INTEGER | read-only | Negotiated link speed. Values: speed_unknown(0), speed_1p5G(1), speed_3G(2), speed_6G(3) |
| STR pdSupportFlags | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.13 | DisplayString | read-only | 1st Byte:forcedPDGUID(0/1),2nd Byte:inVD(0/1),3rd Byte:isGlobalSpare(0/1),4th Byte:isSpare(0/1),5th Byte:isForeign(0/1),6th Byte:intf(0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC).A comma delimited list will appear. |
| STR pdSasAddr | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.14 | DisplayString | read-only | Device SAS addresses. Comma separeted for multiple address |
| INT rawSize | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.15 | INTEGER | read-only | Size(MB) before COD and coercion |
| INT nonCoercedSize | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.16 | INTEGER | read-only | Size(MB) after COD is reserved but before coercion |
| INT coercedSize | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.17 | INTEGER | read-only | Size(MB) after COD is reserved and after coercion |
| INT enclDeviceId | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.18 | INTEGER | read-only | Enclosure's device Id (in decimal); if device is not within enclosure value is -1 |
| INT enclIndex | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.19 | INTEGER | read-only | Firmware internal enclosure index |
| INT slotNumber | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.20 | INTEGER | read-only | Slot number of this drive, if this Physical Drive is an enclosure then -1 |
| STR pdOperationProgress | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.21 | DisplayString | read-only | % Progress is %. e.g. Rebuild progress is 10% |
| INT pdAdpID | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.22 | INTEGER | read-only | Controller id where this Physical Drive is attached |
| STR operationSupport | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.23 | DisplayString | read-only | Online,Offline,Failed,Bad,Uncofigured good,Unconfigured bad, Spare,Spare,replaceMissing,markMissing,startRebuild,stopRebuild, locate,stopSecureEraseNonSED,FWDownloadAllowed |
| STR productID | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.25 | DisplayString | read-only | Product ID |
| STR pdFwversion | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.26 | DisplayString | read-only | Physical drive firmware version |
| STR pdSerialNumber | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.27 | DisplayString | read-only | Physical drive serial number |
| INT diskType | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.28 | INTEGER | read-only | Type of the disk : 0-Unknown, 1-parallel SCSI, 2-SAS, 3-SATA, 4-FC |
| INT partnerDevId | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.29 | INTEGER | read-only | If drive is in an enclosure with dual paths,This is Partner Device ID. In all other cases INVALID(-1) |
| INT mediatype | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.30 | INTEGER | read-only | Media Type HDD(0),SSD(1) |
| INT oemCertified | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.31 | INTEGER | read-only | Indicates whether device is certified(0) or not(1) |
| INT pdTemperature | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.32 | INTEGER | read-only | Physical Drive temperature in Celsius |
| INT piType | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.33 | INTEGER | read-only | SAS Protection Information Type .No SAS protection type used(0) ,SAS PI Type 1(1) ,SAS PI Type 2(2) ,SAS PI Type 3(3) ,Reserved SAS PI Type 4(4) ,Reserved SAS PI Type 5(5) ,Reserved SAS PI Type 6(6) ,Reserved SAS PI Type 7(7). |
| INT userDataBlockSize | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.34 | INTEGER | read-only | Number of bytes of user data in LBA |
| INT cage | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.35 | INTEGER | read-only | Current Cage that holds the SSD |
| STR location | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.36 | DisplayString | read-only | Current location of SSD 0 - Upper, 1 - Lower |
| INT whtemperature | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.37 | INTEGER | read-only | Temperature of each SSD |
| STR flashType | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.38 | DisplayString | read-only | Flash Type being used (SLC / MLC / EMLC) |
| STR lifeCurveStatus | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.39 | DisplayString | read-only | 100 - No throttling being done, 90 - SSD is being throttled |
| STR sSDLifeLeft | 1.3.6.1.4.1.3582.5.1.4.2.1.2.1.40 | DisplayString | read-only | Percentage of SSD life left |
| virtualDevice | 1.3.6.1.4.1.3582.5.1.4.3 | |||
| vdInfo | 1.3.6.1.4.1.3582.5.1.4.3.1 | |||
| GAU vdNumber | 1.3.6.1.4.1.3582.5.1.4.3.1.1 | Gauge | read-only | The present number of rows in the virtualDrive table. |
| vdTable | 1.3.6.1.4.1.3582.5.1.4.3.1.2 | not-accessible | A List of Virtual Drive Entries containing Information/Properties about the virtualDrive. | |
| vdEntry | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1 | not-accessible | An Entry in the virtualDrive Table. | |
| INT virtualDevID | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.1 | INTEGER | read-only | The unique Virtual Drive ID |
| INT size | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.2 | INTEGER | read-only | Total size in MB of the drive |
| INT clusterOwnerDeviceId | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.3 | INTEGER | read-only | Virtual Drive owner's device Id |
| INT targetId | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.4 | INTEGER | read-only | Virtual Drive target id (i.e. 0 to 63) |
| INT state | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.5 | INTEGER | read-only | Virtual Drive state. Values: offline(0), partially_degraded(1), degraded(2), optimal(3) |
| STR name | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.6 | DisplayString | read-only | Virtual Drive name |
| INT defaultCachePolicy | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.7 | INTEGER | read-only | Default cache policy settings. Values: direct_io(0), cached_io(1) |
| INT vdAccessPolicy | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.8 | INTEGER | read-only | Access policy settings. Values: access_rw(0), access_read_only(2), access_blocked(3) |
| INT vdDiskCachePolicy | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.9 | INTEGER | read-write | Physical disk cache policy. Values: enable(1), disable(2) |
| INT bgiState | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.10 | INTEGER | read-only | BGI state on this VD. Values disable(1), enable(0) |
| INT prl | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.11 | INTEGER | read-only | Primay raid level. Values: 0(RAID-0), 1(RAID-1), 3(RAID-3), 4(RAID-4), 5(RAID-5), 6(RAID-6),15(Single Disk or JBOD), 17(RAID-1E/10), 21(RAID-5E), 31(Concatenation),37(RAID-5EEE) |
| INT rLQ | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.12 | INTEGER | read-only | Raid level qualifier |
| INT sRL | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.13 | INTEGER | read-only | Secondary raid level. Values: 0(Stripped), 1(Mirrored), 2(Concatenated), 3(Spanned), -1(Not Supported for IR2) |
| INT stripeSize | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.14 | INTEGER | read-only | Stripe Size. 0(512B),1(1K),2(2K),3(4K),4(8K),5(16K),6(32),7(64K),8(128K) ... 11(1MB) etc |
| INT numDrives | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.15 | INTEGER | read-only | Number of drivers per span |
| INT spanDepth | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.16 | INTEGER | read-only | Number of spans. If only one array then it is considered as 1 span |
| INT initState | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.17 | INTEGER | read-only | 0=no init, 1=quick init, 2=full init |
| INT currentCachePolicy | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.18 | INTEGER | read-only | Default cache policy settings. Values: direct_io(0), cached_io(1) |
| STR operationProgress | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.19 | DisplayString | read-only | Progress % for operation x/ No operation in progress |
| INT vdAdpID | 1.3.6.1.4.1.3582.5.1.4.3.1.2.1.20 | INTEGER | read-only | Controller id where this vd is present |
| vdSpanInfo | 1.3.6.1.4.1.3582.5.1.4.3.2 | |||
| GAU vdSpanNumber | 1.3.6.1.4.1.3582.5.1.4.3.2.1 | Gauge | read-only | The present number of rows in the virtualDrive table. |
| vdSpanTable | 1.3.6.1.4.1.3582.5.1.4.3.2.2 | not-accessible | A List of span Entries containing Information/Properties vd span. | |
| vdSpanEntry | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1 | not-accessible | An Entry in the vdSpan Table. | |
| INT spanID | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.1 | INTEGER | read-only | The unique Span ID |
| INT vDevID | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.2 | INTEGER | read-only | The Virtual Device ID |
| INT startBlock | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.3 | INTEGER | read-only | Span physical disk starting block |
| STR numBlocks | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.4 | DisplayString | read-only | Span physical disk block count |
| INT vdsArrayRef | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.5 | INTEGER | read-only | Array reference (index) |
| INT spAdpId | 1.3.6.1.4.1.3582.5.1.4.3.2.2.1.6 | INTEGER | read-only | Adapter where the span will be found |
| arrayInfo | 1.3.6.1.4.1.3582.5.1.4.3.3 | |||
| GAU arrayNumber | 1.3.6.1.4.1.3582.5.1.4.3.3.1 | Gauge | read-only | The present number of rows in the array table. |
| arrayTable | 1.3.6.1.4.1.3582.5.1.4.3.3.2 | not-accessible | A List of array Entries containing Information/Properties about the arrays. | |
| arrayEntry | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1 | not-accessible | An Entry in the array Table. | |
| INT arrayID | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.1 | INTEGER | read-only | The unique array ID |
| INT arrSize | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.2 | INTEGER | read-only | Size in MB |
| INT arrNumDrives | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.3 | INTEGER | read-only | Number of drives for this array |
| INT arrayRef | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.4 | INTEGER | read-only | Tag for the array |
| STR pdList | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.5 | DisplayString | read-only | Space separated pd identification. e.g. {devID devID devID} etc |
| INT arrAdpId | 1.3.6.1.4.1.3582.5.1.4.3.3.2.1.6 | INTEGER | read-only | Adapter where the array will be found |
| spareInfo | 1.3.6.1.4.1.3582.5.1.4.3.4 | |||
| GAU spareDevNumber | 1.3.6.1.4.1.3582.5.1.4.3.4.1 | Gauge | read-only | The present number of rows in the sparepool table. |
| spareTable | 1.3.6.1.4.1.3582.5.1.4.3.4.2 | not-accessible | A List of sparepool Entries containing Information/Properties about the spare drive | |
| spareEntry | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1 | not-accessible | An Entry in the sparepool Table. | |
| INT spareID | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.1 | INTEGER | read-only | The unique Index |
| INT deviceIdentification | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.2 | INTEGER | read-only | The Device ID |
| STR spareType | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.3 | DisplayString | read-only | Spare type. isDedicated(0/1)isRevertible(0/1)isEnclAffinity(0/1). 1 implies particular feature is enable and 0 represent feature is disable. |
| INT arrayCount | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.4 | INTEGER | read-only | The number of arrays to which the PD can be dedicated |
| STR arrRef | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.5 | DisplayString | read-only | Comma separated array ids. e.g. 2,4,5 etc |
| INT sprAdpId | 1.3.6.1.4.1.3582.5.1.4.3.4.2.1.6 | INTEGER | read-only | Adapter where the spare will be found |
| enclosure | 1.3.6.1.4.1.3582.5.1.4.4 | |||
| enclosureInfo | 1.3.6.1.4.1.3582.5.1.4.4.1 | |||
| GAU enclosureNumber | 1.3.6.1.4.1.3582.5.1.4.4.1.1 | Gauge | read-only | The present number of rows in the enclosure table. |
| enclosureTable | 1.3.6.1.4.1.3582.5.1.4.4.1.2 | not-accessible | A List of enclosure Entries containing Information/Properties about the enclosures in the system. | |
| enclosureEntry | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1 | not-accessible | An Entry in the enclosure table. | |
| INT deviceId | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.2 | INTEGER | read-only | Enclosure device Id. |
| INT enclosureIndex | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.3 | INTEGER | read-only | Firmware internal enclosure index |
| INT slotCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.4 | INTEGER | read-only | Number of slots |
| INT psCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.5 | INTEGER | read-only | Number of power supplies |
| INT fanCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.6 | INTEGER | read-only | Number of fans |
| INT tempSensorCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.7 | INTEGER | read-only | Number of temperature sensors |
| INT alarmCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.8 | INTEGER | read-only | Number of alarms |
| INT simCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.9 | INTEGER | read-only | Number of SIM modules |
| INT isFault | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.10 | INTEGER | read-only | Enclosure has entered a FAULT state or not. Values: false(0), true(1) |
| INT pdCount | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.11 | INTEGER | read-only | Number of physical drives present |
| STR pdIds | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.12 | DisplayString | read-only | Physical drive deviceId's comma separated. |
| INT encAdpID | 1.3.6.1.4.1.3582.5.1.4.4.1.2.1.13 | INTEGER | read-only | Adapter ID where this enclosure is connected |
| enclosureFanInfo | 1.3.6.1.4.1.3582.5.1.4.4.2 | |||
| GAU enclosureFanNumber | 1.3.6.1.4.1.3582.5.1.4.4.2.1 | Gauge | read-only | The present number of rows in the enclosure fan table. |
| enclosureFanTable | 1.3.6.1.4.1.3582.5.1.4.4.2.2 | not-accessible | A List of fan Entries containing Information/Properties about the enclosureFan. | |
| enclosureFanEntry | 1.3.6.1.4.1.3582.5.1.4.4.2.2.1 | not-accessible | An Entry in the enclosureFan table. | |
| INT fanID | 1.3.6.1.4.1.3582.5.1.4.4.2.2.1.1 | INTEGER | read-only | ID for this enclosureFan.(Unique) |
| INT enclosureID | 1.3.6.1.4.1.3582.5.1.4.4.2.2.1.2 | INTEGER | read-only | Enclosure ID where the fan is attached |
| INT fanStatus | 1.3.6.1.4.1.3582.5.1.4.4.2.2.1.3 | INTEGER | read-only | status of the device |
| enclosureSlotInfo | 1.3.6.1.4.1.3582.5.1.4.4.3 | |||
| GAU enclosureSlotNum | 1.3.6.1.4.1.3582.5.1.4.4.3.1 | Gauge | read-only | The present number of rows in the enclosure slot table. |
| enclosureSlotTable | 1.3.6.1.4.1.3582.5.1.4.4.3.2 | not-accessible | A List of slot Entries containing Information/Properties about the enclosure slots. | |
| enclosureSlotEntry | 1.3.6.1.4.1.3582.5.1.4.4.3.2.1 | not-accessible | An Entry in the enclosureSlot table. | |
| INT slotID | 1.3.6.1.4.1.3582.5.1.4.4.3.2.1.1 | INTEGER | read-only | ID for this slot.(Unique) |
| INT sltEncId | 1.3.6.1.4.1.3582.5.1.4.4.3.2.1.2 | INTEGER | read-only | Enclosure ID where the slot |
| INT slotStatus | 1.3.6.1.4.1.3582.5.1.4.4.3.2.1.3 | INTEGER | read-only | status of the device. Values: status-ok(1), status-critical(2), status-nonCritical(3), status-unrecoverable(4), status-not-installed(5), status-unknown(6), status-not-available(7) |
| enclosurePSInfo | 1.3.6.1.4.1.3582.5.1.4.4.4 | |||
| GAU enclosurePSNumber | 1.3.6.1.4.1.3582.5.1.4.4.4.1 | Gauge | read-only | The present number of rows in the enclosure fan table. |
| enclosurePSTable | 1.3.6.1.4.1.3582.5.1.4.4.4.2 | not-accessible | A List of powerSupply Entries containing Information/Properties about the enclosure powerSupply | |
| enclosurePSEntry | 1.3.6.1.4.1.3582.5.1.4.4.4.2.1 | not-accessible | An Entry in the powerSupply table. | |
| INT powerSupplyID | 1.3.6.1.4.1.3582.5.1.4.4.4.2.1.1 | INTEGER | read-only | ID for this powerSupply.(Unique) |
| INT psEnclosureId | 1.3.6.1.4.1.3582.5.1.4.4.4.2.1.2 | INTEGER | read-only | Enclosure id for the powerSupply |
| INT powerSupplyStatus | 1.3.6.1.4.1.3582.5.1.4.4.4.2.1.3 | INTEGER | read-only | status of the power Supply |
| enclosureTSInfo | 1.3.6.1.4.1.3582.5.1.4.4.5 | |||
| GAU enclosureTSNumber | 1.3.6.1.4.1.3582.5.1.4.4.5.1 | Gauge | read-only | The present number of rows in the enclosure fan table. |
| enclosureTSTable | 1.3.6.1.4.1.3582.5.1.4.4.5.2 | not-accessible | A List of TempSensor Entries containing Information/Properties about the enclosure TempSensor | |
| enclosureTSEntry | 1.3.6.1.4.1.3582.5.1.4.4.5.2.1 | not-accessible | An Entry in the adapter table. | |
| INT tempSensorID | 1.3.6.1.4.1.3582.5.1.4.4.5.2.1.1 | INTEGER | read-only | ID for this TempSensor.(Unique) |
| INT encId | 1.3.6.1.4.1.3582.5.1.4.4.5.2.1.2 | INTEGER | read-only | enclosure id for this TempSensor |
| INT tempSensorStatus | 1.3.6.1.4.1.3582.5.1.4.4.5.2.1.3 | INTEGER | read-only | status of this tempSensor |
| INT tsTemperature | 1.3.6.1.4.1.3582.5.1.4.4.5.2.1.4 | INTEGER | read-only | Current temperature in degree Centigrade |
| enclosureAlarmInfo | 1.3.6.1.4.1.3582.5.1.4.4.6 | |||
| GAU enclosureAlarmNumber | 1.3.6.1.4.1.3582.5.1.4.4.6.1 | Gauge | read-only | The present number of rows in the enclosure fan table. |
| enclosureAlarmTable | 1.3.6.1.4.1.3582.5.1.4.4.6.2 | not-accessible | A List of Alarm Entries containing Information/Properties about enclosure Alarms | |
| enclosureAlarmEntry | 1.3.6.1.4.1.3582.5.1.4.4.6.2.1 | not-accessible | An Entry in the enclosureAlarm table. | |
| INT alarmID | 1.3.6.1.4.1.3582.5.1.4.4.6.2.1.1 | INTEGER | read-only | ID for this Alarm.(Unique) |
| INT almEnclosureId | 1.3.6.1.4.1.3582.5.1.4.4.6.2.1.2 | INTEGER | read-only | Enclosure id where the Alarm is attached |
| INT alarmStatus | 1.3.6.1.4.1.3582.5.1.4.4.6.2.1.3 | INTEGER | read-only | Status of the alarm |
| enclosureSIMInfo | 1.3.6.1.4.1.3582.5.1.4.4.7 | |||
| GAU enclosureSIMNumber | 1.3.6.1.4.1.3582.5.1.4.4.7.1 | Gauge | read-only | The present number of rows in the enclosure fan table. |
| enclosureSIMTable | 1.3.6.1.4.1.3582.5.1.4.4.7.2 | not-accessible | A List of SIM Entries containing Information/Properties about enclosure SIMs | |
| enclosureSIMEntry | 1.3.6.1.4.1.3582.5.1.4.4.7.2.1 | not-accessible | An Entry in the enclosureSIM table. | |
| INT simID | 1.3.6.1.4.1.3582.5.1.4.4.7.2.1.1 | INTEGER | read-only | ID for this SIM.(Unique) |
| INT simEnclosureId | 1.3.6.1.4.1.3582.5.1.4.4.7.2.1.2 | INTEGER | read-only | Enclosure id where the SIM is attached |
| INT simStatus | 1.3.6.1.4.1.3582.5.1.4.4.7.2.1.3 | INTEGER | read-only | Number of Logical Drives Configured on this Adapter. |
| topology | 1.3.6.1.4.1.3582.5.1.4.5 | |||
| phyInfo | 1.3.6.1.4.1.3582.5.1.4.5.1 | |||
| GAU phyNumber | 1.3.6.1.4.1.3582.5.1.4.5.1.1 | Gauge | read-only | The present number of rows in the Phy table. |
| phyTable | 1.3.6.1.4.1.3582.5.1.4.5.1.2 | not-accessible | A List of phy Entries containing Information/Properties about the sas topology in the system. | |
| phyEntry | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1 | not-accessible | An Entry in the Phy table. | |
| INT phyIndex | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.1 | INTEGER | read-only | Index for this phy.(Unique) |
| INT deviceIndex | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.2 | INTEGER | read-only | Index of the device in tDeviceTable where the phy is attached |
| INT deviceType | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.3 | INTEGER | read-only | Type of device attached to this phy NO_DEVICE = 0, IOC(1), EDGE_EXPANDER(2), FANOUT_EXPANDER(3),END_DEVICE(4) |
| INT phyID | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.4 | INTEGER | read-only | The phy ID of the attached device |
| INT deviceOffset | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.5 | INTEGER | read-only | The memory offset where the node of the device that is attached to this phy starts. |
| INT phyPos | 1.3.6.1.4.1.3582.5.1.4.5.1.2.1.6 | INTEGER | read-only | Position of the Phy in device attached. |
| devicesInTopology | 1.3.6.1.4.1.3582.5.1.4.5.2 | |||
| GAU tDeviceNumber | 1.3.6.1.4.1.3582.5.1.4.5.2.1 | Gauge | read-only | The present number of rows in the topology Device table. |
| tDeviceTable | 1.3.6.1.4.1.3582.5.1.4.5.2.2 | not-accessible | A List of device Entries containing Information/Properties about the sas topology in the system. | |
| tDeviceEntry | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1 | not-accessible | An Entry in the tDevice table. | |
| INT tDeviceIndex | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.1 | INTEGER | read-only | Index for this device.(Unique) |
| INT contID | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.2 | INTEGER | read-only | Adapter ID where this device is attached |
| INT tDeviceId | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.3 | INTEGER | read-only | Device ID. |
| INT tDeviceType | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.4 | INTEGER | read-only | NO_DEVICE = 0, IOC(1), EDGE_EXPANDER(2), FANOUT_EXPANDER(3),END_DEVICE(4) |
| INT tParentIndex | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.5 | INTEGER | read-only | Index of the parent device in the table where this device is connected. -1 if it root device. |
| INT tNumPhy | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.6 | INTEGER | read-only | Total no of Phy present in this device |
| STR tSASAddr | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.7 | DisplayString | read-only | Device SAS addresses. Comma separeted for multiple address |
| STR tDevDescription | 1.3.6.1.4.1.3582.5.1.4.5.2.2.1.8 | DisplayString | read-only | Detailed description of the Device. |
| lsi_SAS_Traps | 1.3.6.1.4.1.3582.5.1.4.6 | |||
| NTF irAdpAlarmStateEnabled | 1.3.6.1.4.1.3582.5.1.4.6.0.7001 | Alarm has been enabled by user for Adapter $1 | ||
| NTF irAdpBGIRateChanged | 1.3.6.1.4.1.3582.5.1.4.6.0.7002 | Background initialization rate changed to $1 for Adapter $2 | ||
| NTF irAdpCacheDiscarded | 1.3.6.1.4.1.3582.5.1.4.6.0.7003 | Controller $1 cache discarded due to memory/battery problems | ||
| NTF irAdpCacheRebootCantRecover | 1.3.6.1.4.1.3582.5.1.4.6.0.7004 | Unable to recover cache data due to configuration mismatch for Adapter $1 | ||
| NTF irAdpCacheRebootRecover | 1.3.6.1.4.1.3582.5.1.4.6.0.7005 | Cache data recovered successfully for Adapter $1 | ||
| NTF irAdpCacheVersionMismatch | 1.3.6.1.4.1.3582.5.1.4.6.0.7006 | Controller cache discarded due to firmware version incompatibility for Adapter $1 | ||
| NTF irAdpCCRateChanged | 1.3.6.1.4.1.3582.5.1.4.6.0.7007 | Consistency Check rate changed to $1 for Adapter $2 | ||
| NTF irAdpFlashBadImage | 1.3.6.1.4.1.3582.5.1.4.6.0.7008 | Flash downloaded image corrupted for Adapter $1 | ||
| NTF irAdpFlashEraseError | 1.3.6.1.4.1.3582.5.1.4.6.0.7009 | Flash erase error for Adapter $1 | ||
| NTF irAdpFlashEraseTimeout | 1.3.6.1.4.1.3582.5.1.4.6.0.7010 | Flash timeout during erase for Adapter $1 | ||
| NTF irAdpFlashGeneralError | 1.3.6.1.4.1.3582.5.1.4.6.0.7011 | Flash error for Adapter $1 | ||
| NTF irAdpFlashImage | 1.3.6.1.4.1.3582.5.1.4.6.0.7012 | Flashing image: $1 for Adapter $2 | ||
| NTF irAdpFlashOK | 1.3.6.1.4.1.3582.5.1.4.6.0.7013 | Flash of new firmware image(s)complete for Adapter $1 | ||
| NTF irAdpFlashProgramError | 1.3.6.1.4.1.3582.5.1.4.6.0.7014 | Flash programming error for Adapter $1 | ||
| NTF irAdpFlashProgramTimeout | 1.3.6.1.4.1.3582.5.1.4.6.0.7015 | Flash timeout during programming for Adapter $1 | ||
| NTF irAdpLogCleared | 1.3.6.1.4.1.3582.5.1.4.6.0.7016 | Event log cleared for Adapter $1 | ||
| NTF irAdpLogWrapped | 1.3.6.1.4.1.3582.5.1.4.6.0.7017 | Event log wrapped for Adapter $1 | ||
| NTF irAdpPatrolReadComplete | 1.3.6.1.4.1.3582.5.1.4.6.0.7018 | Patrol Read complete for Adapter $1 | ||
| NTF irAdpPatrolReadPaused | 1.3.6.1.4.1.3582.5.1.4.6.0.7019 | Patrol Read paused for Adapter $1 | ||
| NTF irAdpPatrolReadResumed | 1.3.6.1.4.1.3582.5.1.4.6.0.7020 | Patrol Read resumed for Adapter $1 | ||
| NTF irAdpPatrolReadStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7021 | Patrol Read started for Adapter $1 | ||
| NTF irAdpShutdown | 1.3.6.1.4.1.3582.5.1.4.6.0.7022 | Shutdown command received for Adapter $1 | ||
| NTF irAdpHibernate | 1.3.6.1.4.1.3582.5.1.4.6.0.7023 | Hibernate command received for Adapter $1 | ||
| NTF irAdpCrash | 1.3.6.1.4.1.3582.5.1.4.6.0.7024 | Fatal error received for Adapter $1 | ||
| NTF irAdpRRChanged | 1.3.6.1.4.1.3582.5.1.4.6.0.7025 | Rebuild rate changed to $1 for Adapter $2 | ||
| NTF irAdpPRRateChanged | 1.3.6.1.4.1.3582.5.1.4.6.0.7026 | Patrol Read rate changed to $1 for Adapter $2 | ||
| NTF irAdpAlarmStateDisabled | 1.3.6.1.4.1.3582.5.1.4.6.0.7027 | Alarm has been disabled by user for Adapter $1 | ||
| NTF irAdpConfigCleared | 1.3.6.1.4.1.3582.5.1.4.6.0.7028 | Configuration cleared for Adapter $1 | ||
| NTF irAdpReconRateChanged | 1.3.6.1.4.1.3582.5.1.4.6.0.7029 | Reconstruction rate changed to $1 for Adapter $2 | ||
| NTF irAdpDefault | 1.3.6.1.4.1.3582.5.1.4.6.0.7030 | Factory defaults restored for Adapter $1 | ||
| NTF irAdpThresholdsExceededCritical | 1.3.6.1.4.1.3582.5.1.4.6.0.7031 | Adapter $1 on sensor $2 has exceeded critical temperature threshold $3 Temperature $4 | ||
| NTF irAdpThresholdsExceededWarning | 1.3.6.1.4.1.3582.5.1.4.6.0.7032 | Adapter $1 on sensor $2 has exceeded warning temperature threshold $3 Temperature $4 | ||
| NTF irAdpBRMFailed | 1.3.6.1.4.1.3582.5.1.4.6.0.7033 | Backup Rail Monitor has failed for Adapter $1 | ||
| NTF irAdpSSDLifeExhausted | 1.3.6.1.4.1.3582.5.1.4.6.0.7034 | Adapter $1 SSD Life for SlotNo $2 PD ID $3 Dev Life $4 Warning Level $5 Error Level $6 | ||
| NTF irAdpSSDLifeWarning | 1.3.6.1.4.1.3582.5.1.4.6.0.7035 | Adapter $1 SSD Life for SlotNo $2 PD ID $3 Dev Life $4 Warning Level $5 Error Level $6 | ||
| NTF irAdpSSDThrottlingRemoved | 1.3.6.1.4.1.3582.5.1.4.6.0.7036 | Throttling Removed for Adapter $1 PD Slot No $2 Dev ID $3 throttle $4 | ||
| NTF irAdpSSDThrottlingOccuring | 1.3.6.1.4.1.3582.5.1.4.6.0.7037 | Throttling Occuring for Adapter $1 PD Slot No $2 Dev ID $3 throttle $4 | ||
| NTF irAdpPowerThrottlingRemoved | 1.3.6.1.4.1.3582.5.1.4.6.0.7038 | Power Throttling is Removed for Adapter $1 Percent throttle $2 pCISlotAvailPower $3 | ||
| NTF irAdpPowerThrottlingOccuring | 1.3.6.1.4.1.3582.5.1.4.6.0.7039 | Power Throttling is Occuring for Adapter $1 Percent throttle $2 pCISlotAvailPower $3 | ||
| NTF irAdpDFFTempExceededWarning | 1.3.6.1.4.1.3582.5.1.4.6.0.7040 | Adapter $1 flags $2 sensorOrSlot $3 currTemp $4 thresholdTemp $5 pdID $6 | ||
| NTF irAdpDFFTempExceededCritical | 1.3.6.1.4.1.3582.5.1.4.6.0.7041 | Adapter $1 flags $2 sensorOrSlot $3 currTemp $4 thresholdTemp $5 pdID $6 | ||
| NTF irVdtBGIAborted | 1.3.6.1.4.1.3582.5.1.4.6.0.7101 | BGI aborted on Adapter -$1 VD Target -$2 | ||
| NTF irVdtBGICompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7102 | BGI completed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtBGIDoneWR | 1.3.6.1.4.1.3582.5.1.4.6.0.7103 | BGI completed with uncorrectable errors on Adapter -$1 VD Target -$2 | ||
| NTF irVdtBGIFailed | 1.3.6.1.4.1.3582.5.1.4.6.0.7104 | BGI failed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtBGIStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7105 | BGI started on Adapter -$1 VD Target -$2 | ||
| NTF irVdtCCStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7107 | CC started on Adapter -$1 VD Target -$2 | ||
| NTF irVdtCCCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7108 | CC completed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtCCFailed | 1.3.6.1.4.1.3582.5.1.4.6.0.7109 | CC failed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtCCAborted | 1.3.6.1.4.1.3582.5.1.4.6.0.7110 | CC aborted on Adapter -$1 VD Target -$2 | ||
| NTF irVdtCCCompCor | 1.3.6.1.4.1.3582.5.1.4.6.0.7111 | CC completed with correction on Adapter -$1 VD Target -$2 | ||
| NTF irVdtInitAborted | 1.3.6.1.4.1.3582.5.1.4.6.0.7112 | Initialization aborted on Adapter -$1 VD Target -$2 | ||
| NTF irVdtInitFailed | 1.3.6.1.4.1.3582.5.1.4.6.0.7113 | Initialization failed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtInitCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7114 | Initialization completed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtInitFastStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7115 | Fast Initialization started on Adapter -$1 VD Target -$2 | ||
| NTF irVdtInitFullStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7116 | Full Initialization started on Adapter -$1 VD Target -$2 | ||
| NTF irVdtReconStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7117 | Reconstructoin started on Adapter -$1 VD Target -$2 | ||
| NTF irVdtReconCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7118 | Reconstruction completed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtReconResumed | 1.3.6.1.4.1.3582.5.1.4.6.0.7119 | Reconstruction resumed on Adapter -$1 VD Target -$2 | ||
| NTF irVdtReconStopped | 1.3.6.1.4.1.3582.5.1.4.6.0.7120 | Reconstruction stopped on Adapter -$1 VD Target -$2 | ||
| NTF irVdtStateChange | 1.3.6.1.4.1.3582.5.1.4.6.0.7121 | VD state changed on Adapter -$1 VD Target -$2 from $3 to $4 | ||
| NTF irVdtCreated | 1.3.6.1.4.1.3582.5.1.4.6.0.7122 | A new VD created on Adapter -$1 VD Target -$2 | ||
| NTF irVdtDeleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7123 | A VD deleted on Adapter -$1 VD Target -$2 | ||
| NTF irPdtClearAborted | 1.3.6.1.4.1.3582.5.1.4.6.0.7201 | PD Clear aborted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtClearFailed | 1.3.6.1.4.1.3582.5.1.4.6.0.7202 | PD Clear failed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtClearStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7203 | PD Clear started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtClearCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7204 | PD Clear completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtError | 1.3.6.1.4.1.3582.5.1.4.6.0.7205 | Error occurred on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtFormatStart | 1.3.6.1.4.1.3582.5.1.4.6.0.7206 | PD format started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtFormatCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7207 | PD format completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtInserted | 1.3.6.1.4.1.3582.5.1.4.6.0.7208 | PD inserted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblAborted | 1.3.6.1.4.1.3582.5.1.4.6.0.7209 | Rebuild aborted on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblCompleted | 1.3.6.1.4.1.3582.5.1.4.6.0.7210 | Rebuild completed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblFailedBS | 1.3.6.1.4.1.3582.5.1.4.6.0.7211 | Rebuild failed(bad source) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblFailedBT | 1.3.6.1.4.1.3582.5.1.4.6.0.7212 | Rebuild failed(bad target) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblStart | 1.3.6.1.4.1.3582.5.1.4.6.0.7213 | Rebuild started on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblResumed | 1.3.6.1.4.1.3582.5.1.4.6.0.7214 | Rebuild resumed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRblStartA | 1.3.6.1.4.1.3582.5.1.4.6.0.7215 | Rebuild started(auto) on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtRemoved | 1.3.6.1.4.1.3582.5.1.4.6.0.7216 | PD removed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdtStateChange | 1.3.6.1.4.1.3582.5.1.4.6.0.7217 | PD state changed on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 from $5 to $6 | ||
| NTF irPdtSENSEAlert | 1.3.6.1.4.1.3582.5.1.4.6.0.7218 | An unexpected Sense was detected on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 CDBData -$5 SenseData -$6 | ||
| NTF irPdtPredictiveThresholdExceed | 1.3.6.1.4.1.3582.5.1.4.6.0.7219 | Predictive Threshold Exceeded on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdSSDSecurityLocked | 1.3.6.1.4.1.3582.5.1.4.6.0.7220 | SSD is in locked state on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irPdSSDSecurityUnlocked | 1.3.6.1.4.1.3582.5.1.4.6.0.7221 | SSD is in unlocked state on Adapter -$1 Dev -$2 Enc -$3 Slot -$4 | ||
| NTF irBbuPresent | 1.3.6.1.4.1.3582.5.1.4.6.0.7301 | Battery Present for Adapter %d | ||
| NTF irBbuNotPresent | 1.3.6.1.4.1.3582.5.1.4.6.0.7302 | Battery Not Present for Adapter $1 | ||
| NTF irBbuNewBattery | 1.3.6.1.4.1.3582.5.1.4.6.0.7303 | New Battery for Adapter $1 | ||
| NTF irBbuReplaced | 1.3.6.1.4.1.3582.5.1.4.6.0.7304 | Battery replaced for Adapter $1 | ||
| NTF irBbuTempHigh | 1.3.6.1.4.1.3582.5.1.4.6.0.7305 | Battery temperature high for Adapter $1 | ||
| NTF irBbuVoltageLow | 1.3.6.1.4.1.3582.5.1.4.6.0.7306 | Battery voltage low for Adapter $1 | ||
| NTF irBbuCharging | 1.3.6.1.4.1.3582.5.1.4.6.0.7307 | Battery started charging for Adapter $1 | ||
| NTF irBbuDisCharging | 1.3.6.1.4.1.3582.5.1.4.6.0.7308 | Battery is discharging for Adapter $1 | ||
| NTF irBbuTempNormal | 1.3.6.1.4.1.3582.5.1.4.6.0.7309 | Battery temperature is normal for Adapter $1 | ||
| NTF irBbuReplace | 1.3.6.1.4.1.3582.5.1.4.6.0.7310 | Battery needs replacement, SOH Bad for Adapter $1 | ||
| NTF irBbuRelearnStarted | 1.3.6.1.4.1.3582.5.1.4.6.0.7311 | Battery relearn started for Adapter $1 | ||
| NTF irBbuRelearnProgress | 1.3.6.1.4.1.3582.5.1.4.6.0.7312 | Battery relearn in progress for Adapter $1 | ||
| NTF irBbuRelearnComplete | 1.3.6.1.4.1.3582.5.1.4.6.0.7313 | Battery relearn completed for Adapter $1 | ||
| NTF irBbuRelearnTimeout | 1.3.6.1.4.1.3582.5.1.4.6.0.7314 | Battery relearn timed out for Adapter $1 | ||
| NTF irBbuRelearnPending | 1.3.6.1.4.1.3582.5.1.4.6.0.7315 | Battery relearn pending: Battery is under charge for Adapter $1 | ||
| NTF irBbuRelearnPostponed | 1.3.6.1.4.1.3582.5.1.4.6.0.7316 | Battery relearn postponed for Adapter $1 | ||
| NTF irBbuRemoved | 1.3.6.1.4.1.3582.5.1.4.6.0.7317 | Battery removed for Adapter $1 | ||
| NTF irBbuCapacityLow | 1.3.6.1.4.1.3582.5.1.4.6.0.7318 | Current capacity of the battery is below threshold for Adapter $1 | ||
| NTF irBbuCapacityAbove | 1.3.6.1.4.1.3582.5.1.4.6.0.7319 | Current capacity of the battery is above threshold for Adapter $1 | ||
| INT atAdpNumber | 1.3.6.1.4.1.3582.5.1.4.6.1001 | INTEGER | read-only | Adapter ID for which Trap is generated. |
| INT atAlarmState | 1.3.6.1.4.1.3582.5.1.4.6.1002 | INTEGER | read-only | Alarm disabled(0)/enabled(1) |
| INT atRate | 1.3.6.1.4.1.3582.5.1.4.6.1003 | INTEGER | read-only | BGI/Check Consistency/Rebuild/Patrol Read/Reconstruction Rate |
| STR atFlashImageName | 1.3.6.1.4.1.3582.5.1.4.6.1004 | DisplayString | read-only | Flash Image Name |
| INT atSensorNum | 1.3.6.1.4.1.3582.5.1.4.6.1005 | INTEGER | read-only | Sensor Number |
| INT atThreshold | 1.3.6.1.4.1.3582.5.1.4.6.1006 | INTEGER | read-only | Threshold |
| INT atTemperature | 1.3.6.1.4.1.3582.5.1.4.6.1007 | INTEGER | read-only | Temperature Exceeded |
| INT devLife | 1.3.6.1.4.1.3582.5.1.4.6.1008 | INTEGER | read-only | Drive Life |
| INT atWarningLevel | 1.3.6.1.4.1.3582.5.1.4.6.1009 | INTEGER | read-only | Warning Level |
| INT atErrorLevel | 1.3.6.1.4.1.3582.5.1.4.6.1010 | INTEGER | read-only | Error Level |
| INT throttle | 1.3.6.1.4.1.3582.5.1.4.6.1011 | INTEGER | read-only | throttle |
| INT percentThrottle | 1.3.6.1.4.1.3582.5.1.4.6.1012 | INTEGER | read-only | Percent throttle |
| INT pCISlotAvailPower | 1.3.6.1.4.1.3582.5.1.4.6.1013 | INTEGER | read-only | PCI Slot Avail Power |
| INT flags | 1.3.6.1.4.1.3582.5.1.4.6.1014 | INTEGER | read-only | flags SENSOR(1)|SLOT(2) |
| INT sensorOrSlot | 1.3.6.1.4.1.3582.5.1.4.6.1015 | INTEGER | read-only | Sensor Or Slot depending on the value of thr Flag |
| INT currTemp | 1.3.6.1.4.1.3582.5.1.4.6.1016 | INTEGER | read-only | Current Temp |
| INT thresholdTemp | 1.3.6.1.4.1.3582.5.1.4.6.1017 | INTEGER | read-only | Threshold Temp |
| INT vdNum | 1.3.6.1.4.1.3582.5.1.4.6.1101 | INTEGER | read-only | Virtual Drive Target ID for which Trap is generated. |
| INT vdSeq | 1.3.6.1.4.1.3582.5.1.4.6.1102 | INTEGER | read-only | Virtual Drive Sequence no for which Trap is generated. |
| INT vdProg | 1.3.6.1.4.1.3582.5.1.4.6.1103 | INTEGER | read-only | progress % |
| STR vdCachePolicyChangeReason | 1.3.6.1.4.1.3582.5.1.4.6.1104 | DisplayString | read-only | Virtual Drive cache policy. |
| INT vdNewState | 1.3.6.1.4.1.3582.5.1.4.6.1105 | INTEGER | read-only | Virtual Drive state. Values are: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| INT vdOldState | 1.3.6.1.4.1.3582.5.1.4.6.1106 | INTEGER | read-only | Virtual Drive state. Values are: offline(0),partially-degraded(1),degraded(2),optimal(3) |
| INT pdID | 1.3.6.1.4.1.3582.5.1.4.6.1201 | INTEGER | read-only | Device ID for which Trap is generated. |
| INT pdEncIndex | 1.3.6.1.4.1.3582.5.1.4.6.1202 | INTEGER | read-only | Enclosure index(0 means not within an enclosure) for which Trap is generated. |
| INT pdSlotNo | 1.3.6.1.4.1.3582.5.1.4.6.1203 | INTEGER | read-only | Slot no for the enclosure |
| INT pdNewState | 1.3.6.1.4.1.3582.5.1.4.6.1204 | INTEGER | read-only | Physical Drive state. Values are: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64) |
| INT pdOldState | 1.3.6.1.4.1.3582.5.1.4.6.1205 | INTEGER | read-only | Physical Drive state. Values are: unconfigured-good(0),unconfigured-bad(1),hot-spare(2),offline(16),failed(17),rebuild(20),online(24),copyback(32),system(64) |
| STR pdCDBData | 1.3.6.1.4.1.3582.5.1.4.6.1206 | DisplayString | read-only | CDB Data. |
| STR pdSenseData | 1.3.6.1.4.1.3582.5.1.4.6.1207 | DisplayString | read-only | Sence Data. |
| copyrightInfo | 1.3.6.1.4.1.3582.5.1.8 | |||
| STR copyright | 1.3.6.1.4.1.3582.5.1.8.1 | DisplayString | read-only | LSI LOGIC |
RFC description
Monitors LSI MegaRAID SAS RAID controllers including disk drives, virtual disks, batteries, and temperature sensors.
Start monitoring Server with LSI/Broadcom MegaRAID SAS Integrated RAID controller with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.