All MIBs › US-HIQ-TRAP-MIB
Organization: Siemens Enterprise Communications
Last Updated: 2008-06-11
Description: Siemens Enterprise Communications MIB defining SNMP trap notifications for alarms, TCA events, and CSTA registration status on Siemens HiQ enterprise communication systems
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is US-HIQ-TRAP-MIB?
US-HIQ-TRAP-MIB is a Siemens Enterprise Communications (Surpass hiQ softswitch platform) proprietary MIB defining RTP (Real-Time event/alarm) trap notifications, with event fields defined in a companion RtpAdmEventMgmt.mib. Its notifications cover SS7 SCTP association created/deleted, IP signaling-link activated/deactivated, M3UA routing-key activated/deactivated, SCTP network-status change, process-exited, audit-starting/named-detector-starting/detector-within-limit events, available-disk-space below critical/major/minor thresholds (and a free-space-OK recovery), file-system-below-minimum tiers 1-4 (and above-minimum recovery), and file-group-above-threshold tiers. As a notification MIB it lets an administrator get alerted on SS7/SCTP signaling-link and disk-space health on a Siemens Surpass hiQ softswitch. It is deployed on Siemens Enterprise Communications Surpass hiQ softswitch platforms. Engineers can download the US-HIQ-TRAP-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in US-HIQ-TRAP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Siemens Enterprise Communications Surpass hiQ softswitch platforms
Monitoring Examples
An administrator receives hiQAudAvailDiskSpBelowCritThld to catch a critically low disk-space condition on a Siemens Surpass hiQ softswitch.
What Can Be Monitored
- SS7/SCTP signaling-link events and disk-space health
This MIB depends on
Related MIBs
Imported Objects
| rtpEvtAlarmType | OBJECT-TYPE |
| rtpEvtCurrId | OBJECT-TYPE |
| rtpEvtEndkey | OBJECT-TYPE |
| rtpEvtEventTime | OBJECT-TYPE |
| rtpEvtFaultyObject | OBJECT-TYPE |
| rtpEvtFilterLastTransId | OBJECT-TYPE |
| rtpEvtFormatText | OBJECT-TYPE |
| rtpEvtNum | OBJECT-TYPE |
| rtpEvtParameters | OBJECT-TYPE |
| rtpEvtReportingObject | OBJECT-TYPE |
| rtpEvtSequenceNumberIndex | OBJECT-TYPE |
| rtpEvtSet | OBJECT-TYPE |
| rtpEvtSeverity | OBJECT-TYPE |
| rtpEvtShortText | OBJECT-TYPE |
From SNMPv2-SMI
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE |
| hiq8000Admin | OBJECT-IDENTITY |
From SURPASS-RTP-MIB
| surpassRtp | MODULE-IDENTITY |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| hiqTraps | 1.3.6.1.4.1.4329.2.18.2.2.1.47 | This MIB describes the Siemens Network Convergence LLC RTP trap information. The definition of the event is taken from RtpAdmEventMgmt.mib. For the description of these objects: rtpEvtSequenceNumberIndex, rtpEvtCurrId, rtpEvtSet, rtpEvtNum, rtpEvtSeverity, rtpEvtEventTime, rtpEvtReportingObject, rtpEvtFaultyObject, rtpEvtEndkey, rtpEvtFormatText, rtpEvtParameters, rtpEvtAlarmType, rtpEvtShortText, rtpEvtFilterLastTransId | ||
| hiQSs7FaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69 | Events from Rtp event set 69. | ||
| NTF hiQSS7SCTPAssociationCreated | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.60 | The specified SCTP association has been created. | ||
| NTF hiQSS7SCTPAssociationDeleted | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.61 | The specified SCTP association has been deleted. | ||
| NTF hiQSS7IPSignalingLinkActivated | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.62 | The specified IP signaling link has been activated. | ||
| NTF hiQSS7IPSignalingLinkDeactivated | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.63 | The specified IP signaling link has been deactivated. | ||
| NTF hiQSS7M3UARoutingKeyActivated | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.64 | The specified M3UA routing key has been activated. | ||
| NTF hiQSS7M3UARoutingKeyDeactivated | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.65 | The specified M3UA routing key has been deactivated. | ||
| NTF hiQSS7SCTPNetStatusChange | 1.3.6.1.4.1.4329.2.18.2.2.1.47.69.66 | The network status of the specified SCTP association has changed. | ||
| hiQEvtFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.100 | Events from Rtp event set RTP_NLS_EVT (100). | ||
| NTF hiQProcessExitedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.100.2 | Process with given pid exits with given RTP error. | ||
| hiQAudFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102 | Events from Rtp event set RTP_NLS_AUD (102). | ||
| NTF hiQAuditStartingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.1 | The Audit Manager process is starting. | ||
| NTF hiQAudNamedDetectorStartingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.80 | The named detector is starting or restarting. | ||
| NTF hiQAudDetectorWithinLimitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.89 | The named detector previously took longer than its configured maximum run interval. It is now running within this limit again. | ||
| NTF hiQAudAvailDiskSpBelowCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.201 | The available space in the file system is below the configured critical threshold. | ||
| NTF hiQAudAvailDiskSpBelowMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.202 | The available space in the file system is below the configured major threshold. | ||
| NTF hiQAudAvailDiskSpBelowMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.203 | The available space in the file system is below the configured minor threshold level. | ||
| NTF hiQAudFreeSpaceOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.210 | There had been a problem determining the free space on the given file system. The problem no longer exists. | ||
| NTF hiQAudFileSystemBelowMin1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.211 | Available File system space has changed but it is still below one of the configured thresholds. | ||
| NTF hiQAudFileSystemBelowMin2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.212 | Available File system space has echanged but it is still below one of the configured thresholds. | ||
| NTF hiQAudFileSystemBelowMin3Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.213 | Available File system space has changed but it is still below one of the configured thresholds. | ||
| NTF hiQAudFileSystemBelowMin4Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.214 | Available File system space has changed but it is still below one of the configured thresholds. | ||
| NTF hiQAudFileSystemAboveMinTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.215 | Available File system space has increased above the configured minimum threshold level. | ||
| NTF hiQAudFileGrpAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.301 | The size of the given file group is monitored by the audit process and has exceeded the configured critical threshold. | ||
| NTF hiQAudFileGrpAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.302 | The size of the given file group is monitored by the audit process and has exceeded the configured major threshold. | ||
| NTF hiQAudFileGrpAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.303 | The size of the given file group is monitored by the audit process and has exceeded the configured minor threshold. | ||
| NTF hiQAudFileGroupSizeChanged1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.311 | The size of the given file group has changed but is still too high. | ||
| NTF hiQAudFileGroupSizeChanged2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.312 | The size of the given file group has changed but is still too high. | ||
| NTF hiQAudFileGroupSizeChanged3Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.313 | The size of the given file group has changed but is still too high. | ||
| NTF hiQAudFileGroupSizeChanged4Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.314 | The size of the given file group has changed but is still too high. | ||
| NTF hiQAudFileGrpBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.315 | The size of the given file group has previously been reported as too high. The size of this file group has now decreased below all configured thresholds. | ||
| NTF hiQAudProcHeapAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.401 | The heap of the named process is above the configured critical threshold. | ||
| NTF hiQAudProcHeapAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.402 | The heap of the named process is above the configured major threshold. | ||
| NTF hiQAudProcHeapAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.403 | The heap of the named process is above the configured minor threshold. | ||
| NTF hiQAudProcHeapSizeChanged1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.411 | The heap size of the named process has changed, but it is still above one of the configured thresholds. | ||
| NTF hiQAudProcHeapSizeChanged2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.412 | The heap size of the named process has changed, but it is still above one of the configured thresholds. | ||
| NTF hiQAudProcHeapSizeChanged3Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.413 | The heap size of the named process has changed, but it is still above one of the configured thresholds. | ||
| NTF hiQAudProcHeapSizeChanged4Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.414 | The heap size of the named process has changed, but it is still above one of the configured thresholds. | ||
| NTF hiQAudProcHeapSizeOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.415 | The heap size of the process is now below all of the configured thresholds. | ||
| NTF hiQAudProcStackAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.421 | The program stack size of the named process is above the configured critical threshold. | ||
| NTF hiQAudProcStackAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.422 | The program stack size of the named process is above the configured major threshold. | ||
| NTF hiQAudProcStackAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.423 | The program stack size of the named process is above the configured minor threshold. | ||
| NTF hiQAudProcStackSizeChanged1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.431 | The stack size of the named process has changed but is still above one of the configured thresholds. | ||
| NTF hiQAudProcStackSizeChanged2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.432 | The stack size of the named process has changed but is still above one of the configured thresholds. | ||
| NTF hiQAudProcStackSizeChanged3Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.433 | The stack size of the named process has changed but is still above one of the configured thresholds. | ||
| NTF hiQAudProcStackSizeChanged4Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.434 | The stack size of the named process has changed but is still above one of the configured threshold. | ||
| NTF hiQAudProcStackSizeOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.435 | The stack size of the process is now below all of the configured thresholds. | ||
| NTF hiQAudProcessInfoAvailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.448 | The process information for the given process can now be retrieved again. | ||
| NTF hiQAudOSProcNotRunningTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.481 | The named OS process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major. | ||
| NTF hiQAudOSProcInstanceNotRunningTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.482 | The named OS process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major. | ||
| NTF hiQAudProcNotRunningCriticalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.491 | The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as critical. | ||
| NTF hiQAudProcessNotRunningMajorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.492 | The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as major. | ||
| NTF hiQAudProcessNotRunningMinorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.493 | The named process is currently not running. The RTP_NORUN_SEVERITY of this process has been configured as minor. | ||
| NTF hiQAudProcessRunningTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.496 | The named process is now running. | ||
| NTF hiQAudOmniRegisterError1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.503 | The RTP Audit has to register at the OMNI platform for checking OMNI processes. An error occurred when the audit tried to register. | ||
| NTF hiQAudSubsystemRunningTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.508 | The given subsystem is now running. | ||
| NTF hiQAudOmniRegisterError2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.509 | The RTP Audit has to register at the OMNI platform for checking OMNI processes. An error occurred when the audit tried to register. | ||
| NTF hiQAudOmniRegisterOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.522 | Audit can now register at OMNI and thus check OMNI processes. | ||
| NTF hiQAudCpuUtilAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.620 | The current CPU utilization is above the configured critical threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue. | ||
| NTF hiQAudCpuUtilAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.621 | The current CPU utilization is above the configured major threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue. | ||
| NTF hiQAudCpuUtilAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.622 | The current CPU utilization is above the configured minor threshold. CPU utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will then be issue. | ||
| NTF hiQAudCpuUtilTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.628 | Information about the current CPU utilization. | ||
| NTF hiQAudCpuUtilBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.629 | The current CPU utilization is now below all configured thresholds. | ||
| NTF hiQAudCpuUtilChangedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.630 | The current CPU utilization has changed but is still above one of the configured threshold. | ||
| NTF hiQAudSwapSpaceAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.640 | The swap space utilization is above the configured critical threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSwapSpaceAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.641 | The swap space utilization is above the configured major threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSwapSpaceAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.642 | The swap space utilization is above the configured minor threshold. Swap space checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSwapUtilTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.648 | Information about the current swap space utilization. | ||
| NTF hiQAudSwapUtilBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.649 | Current swap space utilization is now below all configured thresholds. | ||
| NTF hiQAudSwapUtilChangedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.650 | The swap space utilization has changed, but it is still above one of the configured thresholds. | ||
| NTF hiQAudMemUtilAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.660 | The current memory utilization is above the configured critical threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudMemUtilAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.661 | The current memory utilization is above the configured major threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudMemUtilAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.662 | The current memory utilization is above the configured minor threshold. Memory utilization checks are done periodically by the RTP audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudMemUtilTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.668 | Information about the current memory utilization. | ||
| NTF hiQAudMemUtilBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.669 | The current memory utilization is now below all configured thresholds. | ||
| NTF hiQAudMemUtilChangedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.670 | The current memory utilization has changed but is still above one of the configured thresholds. | ||
| NTF hiQAudShMemUtilTooAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.680 | The number of currently used shared memory ids is above the configured critical threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudShMemUtilTooAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.681 | The number of currently used shared memory ids is above the configured major threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudShMemUtilTooAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.682 | The number of currently used shared memory ids is above the configured minor threshold. Shared memory ids checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudShMemUtilTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.688 | Information about the current shared memory id utilization. | ||
| NTF hiQAudShMemUtilBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.689 | The number of currently used shared memory ids is now below all configured thresholds. | ||
| NTF hiQAudShMemUtilChangedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.690 | The number of currently used shared memory ids has changed, but is still above one of the configured thresholds. | ||
| NTF hiQAudSemUtilAboveCritThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.700 | The number of currently used semaphores is above the configured critical threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSemUtilAboveMajorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.701 | The number of currently used semaphores is above the configured major threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSemUtilAboveMinorThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.702 | The number of currently used semaphores is above the configured minor threshold. Semaphore utilization checks are done periodically by audit and if this is a temporary situation which no longer exists during the next check cycle, a clearing event will be issued. | ||
| NTF hiQAudSemUtilTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.708 | Information about the current semaphore utilization. | ||
| NTF hiQAudSemUtilBelowThreshTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.709 | The number of currently used semaphores is now below all configured thresholds. | ||
| NTF hiQAudSemUtilChangedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.102.710 | The number of currently used semaphores has changed, but is still above one of the configured thresholds. | ||
| hiQNmFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107 | Events from Rtp event set RTP_NLS_NM (107). | ||
| NTF hiQNmProcessInitCompleteTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.1 | Process called RtpNmReady() to indicate, that it finished its initialization phase successfully. | ||
| NTF hiQNmProcessExitedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.3 | Could not lower given process priority. | ||
| NTF hiQNmDbUnreachable1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.5 | The database could not be reached from the RTP node manager process. | ||
| NTF hiQNmDbMaxProcGrpExceededTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.8 | The database contains more than can be handled by the RTP node manager process. The node manager ignores these entries. | ||
| NTF hiQNmDbUnreachable2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.9 | The database could not be reached from the RTP node manager process. | ||
| NTF hiQNmDbTableNotOpenedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.10 | The database table could not be opened by the RTP node manager process. | ||
| NTF hiQNmDbTableNotClosedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.11 | The database table could not be closed the RTP node manager process. | ||
| NTF hiQNmProcessReadyTimeoutTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.12 | Process did not call RtpNmReady() within the specified time. | ||
| NTF hiQNmProcessHealthChkTimeoutTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.13 | Process did not answer the healthcheck in time. | ||
| NTF hiQNmNodeShutdownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.19 | Node will be stopped on behalf of the specified process. | ||
| NTF hiQNmQueueCorruptedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.22 | The queue of process %s is not in a consistent state. The process will be restarted which will clear the queue. | ||
| NTF hiQNmNodeMgrStartingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.31 | RTP local node manager starting. | ||
| NTF hiQNmProcessRestartShortTimeTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.36 | Process restarts too soon. The node manager will now wait seconds, before it tries again to bring the process up. | ||
| NTF hiQNmQueueAllocErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.39 | The process queue could not be allocated, due to problems with shared memory. | ||
| NTF hiQNmResizeGlobalProcTblTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.42 | The number of processes on another node has changed due to a node restart. As a consequence the process table for that node must be resized. | ||
| NTF hiQNmAliasTableLenExceededTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.43 | The RTP parameter Rtp/Nm/MaxAliases must be greater or equal to the number of aliases configured by tcn files or by the GUI/CLI. | ||
| NTF hiQNmAliasMembersExceededTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.44 | The RTP parameter Rtp/Nm/ProcsPerAlias specified the maximal number of members for all aliases. This parameter must suffice for all alias members configured by tcn files or CLI/GUI. | ||
| NTF hiQNmProcessExecvErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.46 | The binary could not be started since RTPexecv returned the errno. If restart is set for the RTP process, it will be restarted by RTP. | ||
| NTF hiQNmProcessExitedwithCodeTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.47 | Rtp process which name and pid are given exits with given code and to a given state. | ||
| NTF hiQNmProcessTerminatedBySignalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.48 | Rtp process which name and pid are given was killed by given signal while in a given status . | ||
| NTF hiQNmProcessCoreCreatedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.49 | The core is found in the directory $HOME/$PLID/core if the core was written by RtpWriteCore(). | ||
| NTF hiQNmDiagnosticErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.53 | The occurrence of this event is not necessarily a problem, but it might help with diagnosing related problems. | ||
| NTF hiQNmNodeDownMsgErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.102 | When trying to send the NODEDOWN message to the specified node an error occurred. The NODEDOWN message is very important for an orderly termination of the shutdown. | ||
| NTF hiQNmNodeMgrSignalRestartTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.107.104 | A signal of type SIGTERM, SIGINT or SIGQUIT was sent to the node manager. | ||
| hiQTicFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.111 | Events from Rtp event set 111. | ||
| NTF hiQTicDiskFullTicketPoolFailed | 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.7 | Configured ticket pool disk partition is full. | ||
| NTF hiQTicCopyToTicketPoolFailed | 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.23 | The super node manager tried to start an already running subsystem. | ||
| NTF hiQTicPoolDiskDevNotAccessible | 1.3.6.1.4.1.4329.2.18.2.2.1.47.111.47 | Configured ticket pool disk device is not accessible. | ||
| hiQSnmFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119 | Events from Rtp event set RTP_NLS_SNM (119). | ||
| NTF hiQSnmSubsysAlreadyRunningTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.1 | The super node manager tried to start an already running subsystem. | ||
| NTF hiQSnmSubsystemStartErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.2 | The super node manager can't start the mentioned subsystem. The associated start script returns an error. | ||
| NTF hiQSnmSubsystemStartSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.3 | The super node manager started the mentioned subsystem successfully. | ||
| NTF hiQSnmSubsystemStopSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.6 | The super node manager stopped the mentioned subsystem successfully. | ||
| NTF hiQSnmSubsysAdmInterventionTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.7 | The health detector script of the mentioned subsystem requires an administrator intervention. | ||
| NTF hiQSnmRtpRestartForSubsystemTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.10 | The health detector script of the mentioned subsystem requires to restart the whole RTP. Refer to the logfile of the health detector script in $HOME/$PLID/log for the reason. | ||
| NTF hiQSnmRebootForSubsystemTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.11 | The health detector script requires to reboot the system. Refer to the logfile of the health detector script in $HOME/$PLID/log for more informations. | ||
| NTF hiQSnmSystemSwitchOffTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.13 | The health detector script requires to switch off the system. Refer to the logfile of the health detector script in $HOME/$PLID/log for more informations. | ||
| NTF hiQSnmSpecialActScrSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.18 | The special action script of the mentioned subsystem returns successfully. | ||
| NTF hiQSnmClusterChangeTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.20 | The super node manager detects a cluster change via the interface to the cluster software. | ||
| NTF hiQSnmStartupSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.22 | The super node manager process started successfully. | ||
| NTF hiQSnmStartupFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.39 | The super node manager fails to start a single subsystem during the start of the whole RTP. For this reason, the start of the RTP cannot be continued, and all subsystems having been started so far, are stopped. | ||
| NTF hiQSnmSubsysRestartSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.45 | The super node manager has tried to restart the subsystem without success in the past, but now the subsystem is detected as running again. | ||
| NTF hiQSnmSubsysRestartSuccDepTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.46 | The super node manager has tried to restart the subsystem without success in the past, but now the subsystem is detected as running again. The super node manager will restart depending subsystems as well. | ||
| NTF hiQSnmSubsysFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.49 | The super node manager ran the detector for the given subsystem, and it failed. | ||
| NTF hiQSnmClusterChangeInfoSentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.51 | The super node manager managed to inform the local RTP node manager about a change in the cluster configuration. | ||
| NTF hiQSnmRtpPlatformPlidReportTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.60 | The super node manager reports the ID with which the RTP platform is started. | ||
| NTF hiQSnmRtpNodeUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.100 | The super node manager reports that the node is up. | ||
| NTF hiQSnmRtpNodeUpWasDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.101 | The super node manager reports that the node that was down is now up. | ||
| NTF hiQSnmRtpNodeDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.102 | The super node manager reports that the node is down. | ||
| NTF hiQSnmRtpNodeDownWasUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.103 | The super node manager reports that the node that was up is now down. | ||
| NTF hiQSnmNodeInfoMismatchTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.109 | The super node manager detects a mismatch between the own node information (name and ID) listed in the RtpClustertab and the node information supplied by the cluster software. | ||
| NTF hiQSnmRmsWorkingAgainTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.135 | The super node manager finds that the RMS is working again after a failure had been detected in the past. The Reliant Monitor System is responsible for monitoring the cluster interconnect and the current cluster configuration, i.e. which nodes currently belong to the cluster and which do not. | ||
| NTF hiQSnmSpsClusterSwInstalledTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.137 | The super node manager found that the SPS (Siemens Parallel Server) cluster software is installed. It will retrieve its cluster configuration information from SPS. | ||
| NTF hiQSnmRmsClusterSwInstalledTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.139 | The super node manager found that the RMS cluster software is installed. It will retrieve its cluster configuration information from RMS. The Reliant Monitor System is responsible for monitoring the cluster interconnect and the current cluster configuration, i.e. which nodes currently belong to the cluster and which do not. | ||
| NTF hiQSnmCfNodeStatusTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.145 | The status of the given CF (Cluster Foundation) node is reported when the super node manager starts up or when a state change on the node happened. | ||
| NTF hiQPrimeClusterInstalledSnmTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.147 | The super node manager found that the PRIMECLUSTER/CF cluster software is installed. It will retrieve its cluster configuration information from CF (Cluster Foundation). | ||
| NTF hiQSnmSunCluster30InstalledTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.163 | The super node manager found that the SunCluster 3.0 cluster software is installed. It will retrieve its cluster configuration information from SunCluster 3.0. | ||
| NTF hiQSnmSunCluster22InstalledTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.119.173 | The super node manager found that the Sun Cluster 2.2 cluster software is installed. It will retrieve its cluster configuration information from Sun Cluster 2.2. | ||
| hiQLogOracleFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140 | Events from Rtp event set RTP_NLS_ORA (140). | ||
| NTF hiQLogOracleDeadlockDetectedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.104 | All available public servers are servicing requests that require resources locked by a client which is unable to get a public server to release the resources. The number of servers is limited by the system parameter MTS_MAX_SERVER. | ||
| NTF hiQLogOracleDbStartShutErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.106 | An attempt was made to start or shut down an instance while connected to a shared server via a dispatcher. | ||
| NTF hiQLogOracleRecovSessionCnclTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.283 | An error during recovery was determined to be fatal enough to end the current recovery session. | ||
| NTF hiQLogOracleBackProcessFatalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.447 | One of the background processes died unexpectedly. The background trace file in BACKGROUND_DUMP_DEST may have more information. | ||
| NTF hiQLogOracleServerSessFatalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.603 | An Oracle Server session is in an unrecoverable state. | ||
| NTF hiQLogOracleFatalConnErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.1073 | An illegal internal operation was attempted. | ||
| NTF hiQLogOracleFatalLogMinerTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.1280 | One of the following: - One or more input parameters in the DBMS_LOGMNR.START_LOGMNR() procedure may be invalid. - The start or the end SCN may not be available in the log files selected. - The dictionary file specified may be from a different database. | ||
| NTF hiQLogOracleSevereErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.2068 | A severe error (disconnect, fatal Oracle error) was received from the indicated database link. | ||
| NTF hiQLogOracleTwoTaskCommErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.3106 | The communication path between Oracle and the user task has stopped. This is an internal error message not usually issued. | ||
| NTF hiQLogOracleDisconnectFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6300 | A fatal error occurred during the disconnect from the server. This was probably caused by inaccessible message queues. | ||
| NTF hiQLogOracleIpaResetConnErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6307 | A fatal error occurred during the resetting of the connection. | ||
| NTF hiQLogOracleIpaEvtSetupFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6314 | Fatal interprocess communication error. | ||
| NTF hiQLogOracleIpaSharedMemErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6322 | An internal error has occurred in the shared memory handling. | ||
| NTF hiQLogOracleIpaCauseEventErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.6323 | Fatal interprocess communication error. | ||
| NTF hiQLogOracleRemFileServerErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.16041 | The Remote File Server (RFS) process at the standby destination archive log site has encountered a disabling error and is no longer available. Further archiving to the standby site may not be possible. | ||
| NTF hiQLogOracleProgramTermByErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.21503 | A program is in an unrecoverable error state. | ||
| NTF hiQLogOracleRemPortConnErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.27541 | Either the remote address is not valid, or the process is in a state which does not allow connection. | ||
| NTF hiQLogOracleLostRpcConnRemTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.28511 | A fatal error occurred in one of the following places: the connection between the Oracle server and the agent, the heterogeneous services remote agent itself, the connection to the non-Oracle system. This error occurred after loss of communicatio. | ||
| NTF hiQLogOracleLostRpcConnExtTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.140.28576 | A fatal error occurred in either an RPC network connection, the external procedure agent, or the invoked 3GL after communication had been established successfully. | ||
| hiQLogSolidFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141 | Events from Rtp event set RTP_NLS_SOLID (141). | ||
| NTF hiQSolidTooManyClientsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.12 | The specified user failed to connect due to too many connected clients. | ||
| NTF hiQSolidNewConnsAllowedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.13 | New database connections are allowed. | ||
| NTF hiQSolidNoNewConnsAllowedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.20 | The Solid database server is in a fatal state - no new connections are allowed. | ||
| NTF hiQSolidFlowEngineStartedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.119 | The Solid database server was started. | ||
| NTF hiQSolidServerStartFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.120 | The Solid database failed to start. | ||
| NTF hiQSolidFlowEngineIntErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.130 | The Solid FlowEngine process has encountered an internal error and is unable to continue normally. | ||
| NTF hiQSolidFatalErrSrvShutdownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.149 | An emergency shutdown of the Solid database server has occurred due to a fatal error. | ||
| NTF hiQSolidFatalErrSrvNotStartTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.150 | The Solid database server was not started due to a fatal error. | ||
| NTF hiQSolidDatabaseStartedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.151 | The Solid database was started. | ||
| NTF hiQSolidDbConvertedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.201 | The Solid database was successfully converted. | ||
| NTF hiQSolidOldDbVersionTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.204 | The Solid database is from an older version of Solid. | ||
| NTF hiQSolidNewDbNotCreatedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.205 | The new Solid database was not created. | ||
| NTF hiQSolidDbDoesNotExistsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.206 | The Solid database does not exist. | ||
| NTF hiQSolidDbOpenFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.207 | The Solid database failed to open. | ||
| NTF hiQSolidDbIndexTestSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.224 | The Solid database index has been tested and is OK. | ||
| NTF hiQSolidDbIndexErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.225 | The index for the specified Solid database is not OK. | ||
| NTF hiQSolidDbTstOpenFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.226 | The Solid database failed to open for testing with a fatal error. | ||
| NTF hiQSolidDbTstConnectFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.227 | The Solid database failed to connect for testing with a fatal error. | ||
| NTF hiQSolidCreateNewDbFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.240 | A failure occurred when creating a new Solid database. | ||
| NTF hiQSolidTableConvertedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.247 | The specified Solid database table was converted. | ||
| NTF hiQSolidDbOpeningProblemTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.249 | A problem was encountered when opening a Solid database. | ||
| NTF hiQSolidDbBrokenCopyTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.254 | The Solid database is a broken hot standby or netcopy database. | ||
| NTF hiQSolidBackupSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.300 | The Solid backup completed successfully. | ||
| NTF hiQSolidBackupFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.304 | The Solid backup failed. | ||
| NTF hiQSolidStartedHSBPrimaryTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.500 | Started as a hot standby primary. | ||
| NTF hiQSolidStartedHSBSecondaryTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.501 | Started as a hot standby secondary. | ||
| NTF hiQSolidHSBSwitchPrimErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.512 | Failed to switch hot standby role to primary with the specified error. | ||
| NTF hiQSolidHSBSwitchSecErrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.513 | Failed to switch hot standby role to secondary with the specified error. | ||
| NTF hiQSolidBothHSBDbPrimaryTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.515 | Both Solid hot standby databases are marked as primary. | ||
| NTF hiQSolidDatabaseStarted2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.572 | The Solid database was started. | ||
| NTF hiQSolidDbServerCorruptTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1101 | The single database server is corrupted. | ||
| NTF hiQSolidLocalDbServerCorruptTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.141.1103 | The local database server is corrupted. | ||
| hiQUceFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.176 | The UCE Fault Management MOs. | ||
| NTF hiQUceReadyTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.176.8 | |||
| hiQIsupFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.177 | The ISUP Fault Management MOs. | ||
| NTF hiQIsupRsetNotAvailable | 1.3.6.1.4.1.4329.2.18.2.2.1.47.177.7 | The RouteSet is not available. The faulty object will contain the DPC for which the alarm is being generated. | ||
| NTF hiQIsupRsetAvailable | 1.3.6.1.4.1.4329.2.18.2.2.1.47.177.8 | The RouteSet is available. The faulty object will contain the DPC for which the alarm is being cleared. | ||
| hiQMgcpFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178 | The MGCP Fault Management MOs. | ||
| NTF hiQMgcpNoResponseTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.2 | MGCP: This trap indicates the processing error due to no response from Media Gateway. | ||
| NTF hiQMgcpMtaTimeOutMsgTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.3 | MGCP: This trap indicates that the NCS Media Gateway endpoint does not respond to the following message from hiQ 8000, namely, the timer has expired: msg msgType ********************************************** CreateConnection CRCX ModifyConnection MDCX DeleteConnection DLCX NotificationRequest RQNT AuditEndpoint AUEP ********************************************** rtpEvtShortText will be as follows: msgType TransactionID EndPointID@Hostname Protocol where: msgType as in the above table TransactionID 0..999,999,999 EndPointID(Id for Line/DS0) aaln/1, aaln/2, aaln/3, aaln/4 Hostname FQDN Protocol MGCP 1.0 NCS 1.0 For example: CRCX 18 aaln/1@motomta101.ipfonix.com MGCP 1.0 NCS 1.0 This trap is informational. There is no corresponding trap for its abatement(clear). To avoid flooding the element manager system, this trap will be suppressed if the same msgType is received from the same hostname twice in a pre-determined suppresion interval of 15 seconds. | ||
| NTF hiQMgcpInvalidRxMsgTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.4 | MGCP: This trap indicates the processing error due to receiving invalid messages. | ||
| NTF hiQMgcpMtaErrorCodeReasonMsgTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.5 | MGCP: This trap indicates NCS Media Gateway endpoint has reported an ErrorCode or a Reason Code: error code commentary ++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 400 The transaction could not be executed, due to a transient error 502 The transaction could not be executed because the endpoint does not have sufficient resources 504 Unknown or unsupported command (this code is in RFC3435, but not in PacketCable NCS I07) 507 Unsupported functionality (this code is in RFC3435, but not in PacketCable NCS I07) 508 Unknown or unsupported quarantine handling 510 The transaction could not be executed because a protocol error was detected 516 The transaction refers to an unknown call-id 518 Unsupported or unkown package 520 The transaction could not be executed because the endpoint is restarting 526 Insufficient bandwidth 528 Incompatible protocol version 529 Internal hardware failure 534 Codec negotiation failure^M reason code commentary ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 900 Endpoint malfunctioning 901 Endpoint taken out of service 902 Loss of lower layer connectivity (e.g., downstream sync) 903 QoS resource reservation was lost An example of rtpEvtShortText will be as follows: errorCode or reasonCode Commentary TransactionID EndPointID@Hostname Protocol where: error code or reason code as in the above Commentary as in the above TransactionID 0..999,999,999 EndPointID(Id for the Line or DS0) aaln/1, aaln/2, aaln/3, aaln/4 Hostname fully qualified domain name Protocol MGCP 1.0 NCS 1.0 An example of rtpEvtShortText will be as follows: 520 Endpoint malfunctioning 18 aaln/1@motomta101.ipfonix.com MGCP 1. 0 NCS 1.0 This trap is informational. There is no corresponding trap for its its abatement(clear). To avoid flooding the element manager system, this trap will be suppressed if the same msgType is received from the same hostname twice in a pre-determined suppresion interval of 15 seconds. | ||
| NTF hiQCcmStatMgmtStartedUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.8 | The Ccm Statistics Manager started properly. | ||
| NTF hiQCcmStatMgmtStartupFailed | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.9 | The Ccm Statistics Manager failed to start properly. | ||
| NTF hiQMgcp500ResponseMsgs | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.10 | Msg sent to invalid address or ckt::. This trap is requested when CCM receives 500 response from MTA, even after message sent to the DNS Query resulted new IP Address for the MTA. | ||
| NTF hiQMgcpInvalidMTARecognized | 1.3.6.1.4.1.4329.2.18.2.2.1.47.178.11 | The MTA is not recognized. | ||
| hiQH323FaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180 | The H323 Fault Management MOs. | ||
| NTF hiQH323ResourceFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.3 | H323 SM, static/dynamic resource allocation or deallocation failed. | ||
| NTF hiQH323TxCongestionStartTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.4 | H323 SM has congestion started for the Tx queue. New calls will be dropped. | ||
| NTF hiQH323TxCongestionDropTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.5 | H323 SM has congestion dropped for the Tx queue. Active calls are dropping. | ||
| NTF hiQH323TxCongestionStopTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.6 | H323 SM has congestion stopped for the Tx queue. All calls are accepted. This will clear any congestion trap for Tx queue. | ||
| NTF hiQH323InitFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.11 | H323 SM Initialization has failed. | ||
| NTF hiQH323InitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.180.12 | H323 SM Initialization has succeeded. | ||
| hiQAucAuthFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181 | The AUC, Authentication (AUTH) Fault Management MOs. | ||
| NTF hiQAucClientInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.2 | AUC: Authentication client is initialized. | ||
| NTF hiQAucClientImproperInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.3 | AUC: Authentication client is improperly initialized. | ||
| NTF hiQAucAuthRtpMsgTxTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.10 | AUC: RTP message is not properly sent from Authentication server. | ||
| NTF hiQAucAuthServerLinkUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.14 | AUC: Link to A3 database from Authentication server is up. This will clear A3 link down trap. | ||
| NTF hiQAucAuthServerLinkDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.181.15 | AUC: Link to A3 database from Authentication server is down. | ||
| hiQAucUscFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182 | The AUC, User Collection(USC) Fault Management MOs. | ||
| NTF hiQAucUscClientInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.1 | AUC: Usage Collection client is initialized. | ||
| NTF hiQAucUscClientImproperInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.2 | AUC: Usage Collection client is improperly initialized. | ||
| NTF hiQAucUscServerInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.3 | AUC: Usage Collection server is initialized. | ||
| NTF hiQAucUscServerImproperInitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.4 | AUC: Usage Collection server is improperly initialized. | ||
| NTF hiQAucUscServerFtpUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.9 | AUC: Link to Primary FTP site from Usage Collection server is up. It clears the Link Down trap for FTP site. | ||
| NTF hiQAucUscServerFtpDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.10 | AUC: Link to Primary FTP site from Usage Collection server is down. | ||
| NTF hiQAucUscServerDeleteCdrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.12 | AUC: Usage Collection Server is unable to delete CDR file from RTP. | ||
| NTF hiQAucUscServerRxCdrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.14 | AUC: Usage Collection server has failed to receive CDR file from RTP. | ||
| NTF hiQAucUscServerTxCdrTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.15 | AUC: Usage Collection server has failed to send CDR file to FTP site. | ||
| NTF hiQAucUscServerBackupUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.16 | AUC: Link to Backup FTP site from Usage Collection server is up. | ||
| NTF hiQAucUscServerBackupDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.17 | AUC: Link to Backup FTP site from Usage Collection server is down. | ||
| NTF hiQAucUscServerFaultyBillingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.19 | AUC: Usage Collection Server trap: Faulty Billing File is being sent to Billing Server as binary and marked as an error. | ||
| NTF hiQAucUscPriStorNotPossibleTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.35 | Primary storage of CDR billing data is no longer possible on this node. This may be caused by lack of disk space or the cdr disk partition is not writable. | ||
| NTF hiQAucUscPriStorOKTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.36 | Primary storage of CDR billing data is possible on this node. | ||
| NTF hiQAucUscSecStorNotPossibleTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.37 | Secondary storage of CDR billing data is no longer possible on this node. This may be caused by lack of disk space or the cdr disk partition is not writable. | ||
| NTF hiQAucUscFileSeqNumberErrorTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.38 | The CDR file sequence number may be incorrect. This is caused by a database read or write error. | ||
| NTF hiQAucUscLocalSecStorageOk | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.39 | Secondary storage of CDR billing data is OK on this node. | ||
| NTF hiQAucUscStbPriFTPLinkUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.40 | Usage collection: Standby primary ftp link is up. | ||
| NTF hiQAucUscStbPriFTPLinkDown | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.41 | Usage collection: Standby primary ftp link is down. | ||
| NTF hiQAucUscStbBackupFTPLinkUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.42 | Usage collection: Standby backup ftp link is up. | ||
| NTF hiQAucUscStbBackupFTPLinkDown | 1.3.6.1.4.1.4329.2.18.2.2.1.47.182.43 | Usage collection: Standby backup ftp link is down. | ||
| hiQXdmFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.183 | The XDM Fault Management MOs. | ||
| NTF hiQXdmInitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.1 | XDM process is initialized and ready to process translation/routing commands. | ||
| NTF hiQXdmNotTerminatedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.4 | XDM process is not properly shutdown. | ||
| NTF hiQXdmXlaInitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.14 | XDM initialized the XLA shared memory from the database. | ||
| NTF hiQXdmXlaNotInitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.183.15 | XDM failed to initialize the XLA shared memory from the database. | ||
| hiQOmapFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187 | The OMAP Fault Management MOs. | ||
| NTF hiQOmapInitFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.1 | OMAP initialization failure. | ||
| NTF hiQOmapMissingPriTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.20 | OMAP:Call processing failed. There is missing PRI info in UCE setup message, aborting the call. | ||
| NTF hiQOmapBchBusyTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.21 | OMAP:Call processing failed. Setting B-ch busy failed. | ||
| NTF hiQOmapMissingChannelTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.26 | OMAP:Call processing failed. Missing channel info in OMAP setup, aborting the call. | ||
| NTF hiQOmapSaveCallTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.187.27 | OMAP:Call processing failed, unable to save call Id in RTM. | ||
| hiQCdmFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188 | The CDM Fault Management MOs. | ||
| NTF hiQCdmInitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.1 | CDM is initialized and ready to process ISDN configuration commands. | ||
| NTF hiQCdmNotInitializedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.2 | CDM process did not start correctly and is unable to process ISDN configuration commands. | ||
| NTF hiQCdmTerminatedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.3 | CDM process is being shut down and will not process further ISDN configuration commands. | ||
| NTF hiQCdmNotTerminatedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.4 | CDM process is not properly shut down. | ||
| NTF hiQCdmSendToMgTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.19 | CDM can not send provisioning data to a Media Gateway shelf. | ||
| NTF hiQCdmReceiveFromMgTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.20 | CDM failed to receive data from a Media Gateway shelf. | ||
| NTF hiQCdmMgShelfRebootedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.23 | CDM, Media Gateway shelf has been rebooted successfully. | ||
| NTF hiQCdmMgShelfNotRebootedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.24 | CDM, Media Gateway shelf has not benn rebooted successfully. | ||
| NTF hiQCdmMgProvisioningTimedOutTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.25 | CDM, Media Gateway shelf did not respond to provisioning with an acknowledgement within certain time. | ||
| NTF hiQCdmMgProvisioningFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.26 | CDM, Media Gateway shelf did not respond to provisioning with a failure acknowledgement. | ||
| NTF hiQCdmMgConnectionSuccessTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.27 | CDM, a connection was successfully established between CDM and a Media Gateway shelf. | ||
| NTF hiQCdmMgConnectionFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.188.28 | CDM,a connection was not successfully established between CDM and a Media Gateway shelf. | ||
| hiQPrmFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.189 | The PRM Fault Management MOs. | ||
| hiQOvlFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190 | The Overload Fault Management MOs. | ||
| NTF hiQOvlCongLevelToCL3Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.2 | OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL3 for a certain SM. This will clear up previos CL2 level trap. CL3 means highest level of congestion and CL0 means no congestion. | ||
| NTF hiQOvlCongLevelToCL2Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.3 | OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL2 for a certain SM. This will clear previous CL1 or CL3 traps from which it changed from. CL3 means highest level of congestion and CL0 means no congestion. | ||
| NTF hiQOvlCongLevelToCL1Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.4 | OVL: This Trap is sent to report various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed from CL* to CL1 for a certain SM. This will clear previous CL2 traps from which it changed from. CL3 means highest level of congestion and CL0 means no congestion. | ||
| NTF hiQOvlCongLevelToCL0Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.5 | OVL: This Trap is sent to report to clear various Over Load Manager Major (Critical) Congestion Level conditions for several signaling managers including 'ISUP', 'OMAP', 'H323', 'MGCP', and 'SIP+'. This informs that congestion level changed to 0 level congestion. This will clear any previous CL* traps. CL3 means highest level of congestion and CL0 means no congestion. | ||
| NTF hiQOvlNewCallsExceedingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.6 | OVL: New-call attempts exceeding limit of number in time interval of millisecs. | ||
| NTF hiQOvlNewCallsBelowLimitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.7 | OVL: New-call attempts below limit of number in time interval of millisecs. This trap clears New-call attempts exceeding limit trap. | ||
| NTF hiQOvlNewCallsBlockTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.8 | OVL: Call processing status set to block new calls for a SM. | ||
| NTF hiQOvlNewCallsAcceptTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.9 | OVL: Call processing status set to accept new calls for a SM. This trap clears the set to block new calls trap. | ||
| NTF hiQOvlCongLevelChangeTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.190.10 | OVL: This Trap is sent to clear various Over Load Manager Major Congestion Level conditions before reporting a new level. | ||
| hiQDbFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.191 | The DB Fault Management MOs. | ||
| NTF hiQDBInitCompleteTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.191.10 | Process DBManager has completed initialization. | ||
| NTF hiQDBOperationalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.191.33 | Process DBManager operational error has occurred. | ||
| hiQTcapFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.192 | The TCAP Fault Management MOs. | ||
| NTF hiQTcapInstanceReadyTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.192.8 | TCAP Instance is ready for Call Processing. It will clear the TCAP Exited trap. | ||
| hiQLnpFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.193 | The LNP Fault Management MOs. | ||
| NTF hiQLnpSuccessfulRegistrationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.193.1 | LNP successfully registered for use within call processing. It clears the failed registration trap. | ||
| NTF hiQLnpFailedRegistrationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.193.2 | LNP registration failed for use within the call processing. | ||
| hiQOmapDispFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194 | The Omap Fault Management MOs. | ||
| NTF hiQOmapDispInitFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.5 | OMAP Dispatcher initialization has failed. and probable cause is RTP related functionality. This will abort the Dispatcher. | ||
| NTF hiQOmapDispConnToMgDownTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.6 | OMAP Dispatcher process failed to connect to Media Gateway. | ||
| NTF hiQOmapDispStartedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.21 | OMAP Dispatcher process started successfully. | ||
| NTF hiQOmapDispConnToMgUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.22 | OMAP Dispatcher process succeeded to connect to Media Gateway. | ||
| NTF hiQOmapDispConnFailOverFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.23 | OMAP Dispatcher process failed to connect to another dispatcher when dispatcher connection to MG is down. | ||
| NTF hiQOmapDispConnFailOverSuccTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.194.24 | OMAP Dispatcher process successfully connected to another dispatcher when dispatcher connection to MG is down. | ||
| hiQSipFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.198 | The SIP Fault Management MOs. | ||
| NTF hiQSipStartUpTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.198.1 | SIP SM process is up and running. | ||
| hiQRtmFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.199 | The ISDN Fault Management MOs. | ||
| NTF hiQRtmStartedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.199.1 | RTM process started properly. | ||
| NTF hiQRtmInitFailedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.199.2 | RTM Initialization failed. A probable cause could be RTP related resource. | ||
| hiQSoapServerFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.207 | The SOAP Server Fault Management Messages. | ||
| NTF hiQSubMgmtRemoveResourceError | 1.3.6.1.4.1.4329.2.18.2.2.1.47.207.5 | The job to remove subscriber management resources failed. | ||
| NTF hiQSubMgmtRemoveResourceSuccess | 1.3.6.1.4.1.4329.2.18.2.2.1.47.207.6 | The job to remove subscriber management resources completed successfully. | ||
| hiQSmdiFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208 | The SMDI Fault Management Messages. | ||
| NTF hiQSmdiStartingUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.1 | The SMDI process is being initialized. | ||
| NTF hiQSmdiDbError | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.3 | SMDI process could not be initialized due to a database error. | ||
| NTF hiQSmdiDbErrorCleared | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.4 | The SMDI error caused by database initialization was resolved by manual intervention. | ||
| NTF hiQSmdiLinkError | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.5 | SMDI process could not establish a link within the provisioned amount of time and tries. Manual intervention is required for immediate reconnection. | ||
| NTF hiQSmdiLinkUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.6 | SMDI process has resolved the previously reported link error. | ||
| NTF hiQSmdiREcvIPAddrPortError | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.7 | An error occurred during initialization of the SMDI receive IP address and port. | ||
| NTF hiQSmdiRecvIPAddrPortOk | 1.3.6.1.4.1.4329.2.18.2.2.1.47.208.8 | Trap indicates that SMDI (Simplified Message Desk Interface) can listen on the IP address and port. | ||
| hiQCstaFaultMgmt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.210 | The CSTA Fault Management Messages. | ||
| NTF hiQCstaStartedUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.1 | The CSTA signaling manager process started properly. | ||
| NTF hiQCstaCAPLinkUp | 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.4 | The link to the CAP (Common Application Platform) is up. | ||
| NTF hiQCstaTTUDRegistrationFailure | 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.5 | The CSTA SM process was unable to register with the TTUD process. | ||
| NTF hiQCstaTTUDRegistrationSuccess | 1.3.6.1.4.1.4329.2.18.2.2.1.47.210.6 | The CSTA SM process registered successfully with the TTUD process. | ||
| hiQTcaFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216 | Events from TCA event set TCA_EVT_SET_ID (216). | ||
| NTF hiQTcaL3CommunicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.1 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2CommunicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.2 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1CommunicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.3 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3ServiceTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.4 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2ServiceTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.5 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1ServiceTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.6 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3ProcessingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.7 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2ProcessingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.8 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1ProcessingTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.9 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3EquipmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.10 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2EquipmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.11 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1EquipmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.12 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3EnvironmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.13 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2EnvironmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.14 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1EnvironmentTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.15 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3DatabaseTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.16 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2DatabaseTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.17 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1DatabaseTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.18 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3MibTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.19 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2MibTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.20 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1MibTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.21 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3SecurityTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.25 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2SecurityTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.26 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1SecurityTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.27 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3SS7Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.28 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2SS7Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.29 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1SS7Trap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.30 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL3IndicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.31 | The number of log requests for the specified log category in the last sampling interval has crossed the highest level L3 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL2IndicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.32 | The number of log requests for the specified log category in the last sampling interval has crossed the medium level L2 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaL1IndicationTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.33 | The number of log requests for the specified log category in the last sampling interval has crossed the lowest level L1 threshold of logs per time interval. The alarm can be cleared manually or, it will clear automatically after the configured time interval. | ||
| NTF hiQTcaClearedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.216.100 | The number of logged entries for the specified log category has not crossed the threshold that caused a previous alarm for a certain period of time. | ||
| hiQGlobalFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217 | Events from global event set GLOBAL_EVT_SET_ID (217). | ||
| NTF hiQGlobalCriticalLossOfCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.1 | This event is used to report a critical loss of communication. | ||
| NTF hiQGlobalMajorLossOfCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.2 | This event is used to report a major loss of communication. | ||
| NTF hiQGlobalMinorLossOfCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.3 | This event is used to report a minor loss of communication. | ||
| NTF hiQGlobalCommsEstablishedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.4 | This event is used to report that communication has been (re-)e established. | ||
| NTF hiQGlobalProcessInitActiveTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.5 | The process has started successfully. | ||
| NTF hiQGlobalProcSevereInitFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.6 | The process encountered an error during initialization and cannot continue. | ||
| NTF hiQGlobalProcPartialInitFailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.7 | This trap is used to report that the specified process encountered a partial initialization failure. | ||
| NTF hiQGlobalProcAbnormalTermTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.8 | This trap is used to report that the specified process terminated abnormally. | ||
| NTF hiQGlobalProcessAliasGrpAvail | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.9 | The process Alias group, which is a collection of redundant processes, is available. | ||
| NTF hiQGlobalProcessAliasGrpUnavail | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.10 | The process Alias group, which is a collection of redundant processes, is not available. This means that none of the functions provided by these processes is available. | ||
| NTF hiQGlobalResourceExceedLimitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.11 | The specified resource has exceeded a defined limit. | ||
| NTF hiQGlobalResourceWithinLimitTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.12 | The specified resource is within the defined limit. | ||
| NTF hiQVeryImportantFuncUnavailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.13 | This trap is used to report that the specified function is unavailable. | ||
| NTF hiQImportantFuncUnavailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.14 | This trap is used to report that the specified function is unavailable. | ||
| NTF hiQGlobalFuncUnavailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.15 | This trap is used to report that the specified function is unavailable. | ||
| NTF hiQGlobalFuncAvailTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.16 | This trap is used to report that the specified function is available. | ||
| NTF hiQGlobalMsgQueueAboveHighThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.17 | This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit. | ||
| NTF hiQGlobalMsgQueueAboveMedThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.18 | This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit. | ||
| NTF hiQGlobalMsgQueueAboveLowThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.19 | This trap is used to report that the number of elements in the specified queue has exceeded a defined threshold limit. | ||
| NTF hiQGlobalMsgQueueBelowThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.20 | This trap is used to report that the number of elements in the specified queue is below the defined threshold limit. | ||
| NTF hiQGlobalVerySevereDegradedCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.21 | This event is used to report that the specified communication link is either congested or operating in a degraded state. | ||
| NTF hiQGlobalSevereDegradedCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.22 | This event is used to report that the specified communication link is either congested or operating in a degraded state. | ||
| NTF hiQGlobalDegradedCommsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.23 | This event is used to report that the specified communication link is either congested or operating in a degraded state. | ||
| NTF hiQGlobalCommsOperationalTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.217.24 | This event is used to report that the specified communication link is operational. | ||
| hiQSecurityFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.218 | Events from security event set SECURITY_EVT_SET_ID (218). | ||
| NTF hiQSecurityFirewallTrigTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.218.1 | The firewall has started to discard IP packets. The number of IP packets/second/user from at least a single user has exceeded the configured threshold. | ||
| NTF hiQSecurityFirewallTrigClearTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.218.2 | The condition causing the triggering of the firewall has been cleared. No more IP packets are being discarded. | ||
| hiQHardwareFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219 | Events from hardware event set HARDWARE_EVT_SET_ID (219). | ||
| NTF hiQVerySevereHardwareFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.1 | A very severe HW failure has been detected. | ||
| NTF hiQSevereHardwareTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.2 | A severe HW failure has been detected. | ||
| NTF hiQHardwareFailureTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.3 | A HW failure has been detected. | ||
| NTF hiQHardwareInServiceTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.4 | This event is used to clear a hardware-related alarm. | ||
| NTF hiQSystemSurvivalModeTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.219.5 | The system is operating in survival mode. | ||
| hiQLicensingFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220 | Events from software licensing event set LICENSING_EVT_SET_ID (220). | ||
| NTF hiQLicensesExceededTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.1 | The number of assigned licenses has exceeded the number of activated licenses for the type identified by faultyObject. | ||
| NTF hiQLicenseCountOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.2 | The number of assigned licenses is now within the limit allowed by the number of licenses activated for the type identified by faultyObject. | ||
| NTF hiQLicenseCountMismatchTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.3 | The license count is different between the two nodes of the hiQ cluster for the type identified by faultyObject. | ||
| NTF hiQLicenseCountSyncTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.4 | The license count is now the same between the two nodes of the hiQ cluster for the type identified by faultyObject. | ||
| NTF hiQLicenseSessionsTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.5 | The number of license sessions exceeds the warning threshold for the type identified by faultyObject. | ||
| NTF hiQLicenseSessionCountOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.6 | The number of license sessions is now below the warning threshold for the type identified by faultyObject. | ||
| NTF hiQLicenseRestoreTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.7 | Restoring the system to a release older from the last more than or equal to 72 hours causes licensing enforcement resulting in licensing violations. | ||
| NTF hiQLicenseRestoreOkTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.220.8 | Licensing in now properly working in the system, after it has been restored. | ||
| hiQAccountMgmtFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.221 | Events from account management event set ACCOUNT_EVT_SET_ID (221). | ||
| NTF hiQAccountInactiveTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.1 | The specified login account has not been used recently and may be disabled in the future. | ||
| NTF hiQAccountDisabledTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.2 | The specified login account has not been used recently and may be deleted in the future. | ||
| NTF hiQAccountDeletedTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.221.3 | Alarms were previously reported, indicating that the specified account has been inactive and subsequently disabled. The account was still not used and has now been deleted. | ||
| hiQSurvivalAuthorityObjects | 1.3.6.1.4.1.4329.2.18.2.2.1.47.222 | |||
| INT hiQSurvivalTrapType | 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.1 | INTEGER | read-only | An enumerated value indicating the trap type. |
| OCT hiQSurvivalNodeName | 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.2 | OCTET STRING | read-only | Name of node reporting to survival authority. |
| OCT hiQSurvivalClusterName | 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.3 | OCTET STRING | read-only | Name of cluster reporting to survival authority. |
| IP hiQSurvivalNodeIPAddress | 1.3.6.1.4.1.4329.2.18.2.2.1.47.222.4 | IpAddress | read-only | IP address of node reporting to survival authority. |
| hiQSurvivalAuthorityTraps | 1.3.6.1.4.1.4329.2.18.2.2.1.47.223 | Events for Survival Authority processing | ||
| NTF hiQPartnerNodeLeftClusterTrap | 1.3.6.1.4.1.4329.2.18.2.2.1.47.223.1 | Sent to the 'Survival Authority' to request a communication test or when a node cannot communicate with its partner, the 'Survival Authority' is requested to respond with an SNMP set command. | ||
| hiQOmmMgmtFaultMgt | 1.3.6.1.4.1.4329.2.18.2.2.1.47.230 | Events from operational maintenance measurement event set OMM_EVT_SET_ID (230). | ||
| NTF hiQOmmBGCFCounterAboveHighThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.1 | The event count has exceeded the alarm threshold for the type identified by faultyObject. | ||
| NTF hiQOmmBGCFCounterAboveLowThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.2 | The event count has exceeded the alarm threshold for the type identified by faultyObject. | ||
| NTF hiQOmmBGCFCounterBelowThld | 1.3.6.1.4.1.4329.2.18.2.2.1.47.230.3 | The event count is below the threshold allowed for the type identified by faultyObject. |
RFC description
Defines SNMP trap definitions for Siemens hiQ telecommunications system components including CSTA, MGCP, and various subsystems.
Start monitoring Siemens Enterprise Communications Surpass hiQ softswitch platforms (SS7/SCTP signaling-link and disk-space notification status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.