All MIBs › GW-EPON-MIB
Organization: Organization
Last Updated: 2008-04-10
Category: Technology: EPON/PON
Description: Gateway EPON MIB for managing Ethernet Passive Optical Network OLT/ONU devices and subscriber provisioning.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is GW-EPON-MIB?
GW-EPON-MIB is a vendor-specific private MIB (auto-generated via AdventNet Agent Toolkit's MibEditor) for Ethernet Passive Optical Network (EPON) OLT/ONU chassis-based equipment; the source module itself uses generic placeholder text for ORGANIZATION and CONTACT-INFO, so the specific manufacturer isn't confirmable from the MIB text alone, though the gwEponDevTable includes its own deviceVendor string object for per-device vendor reporting. It models a full EPON chassis hierarchy: gwEponDevTable exposes device type, operational status, alarm status, firmware/software/hardware versions, and system uptime for each managed OLT/ONU device; gwEponBoardTable reports per-slot board type, operational status, alarm level, temperature, and CPU/memory usage for chassis line cards; and ponPortTable tracks each PON port's ONU count (ponPortMaxOnu/ponPortCurrOnu), operational and alarm status/mask bits, available/actual bandwidth, and APS (automatic protection switching) control/status. Because it combines chassis health (board temperature, CPU/memory usage), PON-port bandwidth utilization, and per-ONU alarm-level bitmaps in one module, it is well suited for monitoring board overheating or overload, PON port oversubscription (ponPortCurrOnu approaching ponPortMaxOnu), and individual ONU alarm conditions via the OnuAlarmLevelList bitmap. It depends on the GWTT-SMI enterprise tree for its device anchor point and standard SNMPv2-TC/SNMPv2-SMI textual conventions, and is deployed on EPON OLT chassis and their subordinate ONUs in FTTH/FTTB access networks; administrators can download the GW-EPON-MIB file to load it into their MIB browser when managing these EPON deployments.
IPNetwork Monitor allows you to monitor SNMP objects defined in GW-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- EPON OLT/ONU chassis equipment (vendor not confirmable from MIB source; generic OEM placeholder text)
Monitoring Examples
An operator polls ponPortCurrOnu against ponPortMaxOnu to check PON port capacity headroom, and checks boardTemperature and boardCpuUsage for the housing line card; a port nearing its max ONU count combined with high board CPU usage would flag a PON port approaching oversubscription.
What Can Be Monitored
- device operational/alarm status per OLT/ONU
- board temperature and CPU/memory usage
- PON port current vs. max ONU count
- PON port available/actual bandwidth
- PON port alarm status/mask bits
- per-ONU alarm-level bitmap
This MIB depends on
Related MIBs
Imported Objects
From GWTT-SMI
| devices | OBJECT-IDENTITY |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using ponPortOnuLpbTxFrms OID:
Select an EPON OLT/ONU chassis equipment (vendor unconfirmed, generic OEM MIB) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ponPortOnuLpbTxFrms into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of frames transmit by this ONU Logical Link. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| gwEponMib | 1.3.6.1.4.1.10072.2.20 | EPON private MIB information definitions | ||
| gwEponMibObjects | 1.3.6.1.4.1.10072.2.20.1 | |||
| gwEponCfgGroup | 1.3.6.1.4.1.10072.2.20.1.1 | |||
| gwEponDevice | 1.3.6.1.4.1.10072.2.20.1.1.1 | |||
| gwEponDevTable | 1.3.6.1.4.1.10072.2.20.1.1.1.1 | not-accessible | Table of device informations | |
| gwEponDevEntry | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1 | not-accessible | An entry in the table, containing properties and some descriptions | |
| I32 deviceIndex | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.1 | Integer32 | read-only | Index of device |
| EPO deviceType | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.2 | EponDeviceType | read-only | The value indicates the type of this device |
| STR deviceName | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.3 | DisplayString | read-write | A string indicates or configure device name |
| STR deviceDescription | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.4 | DisplayString | read-write | Description for this device |
| STR deviceLocation | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.5 | DisplayString | read-write | A string indicates and configure the device location |
| STR deviceVendor | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.6 | DisplayString | read-only | A string indicates the vendor |
| STR deviceFirmWareVersion | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.7 | DisplayString | read-only | The value indicates the version of firmware |
| STR deviceSoftWareVersion | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.8 | DisplayString | read-only | The value indicates the version of software |
| STR deviceHardWareVersion | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.9 | DisplayString | read-only | The value indicates the version of PCB |
| INT deviceOperStatus | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.10 | INTEGER | read-only | The current operational state of the device, 'down(2)' indicates that the ONU is off-line. 'dormant(4)' indicates the device is waiting for external actions (such as no bandwidth for any service), 'powerDown(5)' indicates the device is power down or dying gasp. |
| INT deviceAlarmStatus | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.11 | INTEGER | read-only | The value indicates alarm status for this device, it means unique alarm occur that unique bit is set '1', on the other hand, unique bit is set 0 while this alarm is cleared. |
| MAC deviceMacAddress | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.12 | MacAddress | read-write | The value indicates and confgure device MAC address |
| TIK deviceLastChange | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.15 | TimeTicks | read-only | the last time for this device change |
| INT deviceReset | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.16 | INTEGER | read-write | Description |
| I32 deviceEntLogicalIndex | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.17 | Integer32 | read-only | The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous. |
| STR deviceEntLogicalCommunity | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.18 | DisplayString | read-only | An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support). |
| I32 deviceOnuTestDistance | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.19 | Integer32 | read-only | the distance between OLT and unique ONU, unit:meter |
| TIK deviceUpTime | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.20 | TimeTicks | read-only | The value of this object uniquely identifies up time about this device. |
| INT deviceStpEnable | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.21 | INTEGER | read-write | OLT or ONU spanning tree contral, enable(1)- enable the spanning tree protocol, disable(2)- disable the spanning tree protocol. |
| STR deviceChipsetVendor | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.22 | DisplayString | read-only | PON chipset vendor ID |
| I32 deviceChipsetMode | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.23 | Integer32 | read-only | PON chipset type |
| STR deviceChipsetRevision | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.24 | DisplayString | read-only | PON chipset revision |
| STR deviceChipsetDate | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.25 | DisplayString | read-only | PON chipset design date |
| STR deviceCapPortDesc | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.26 | DisplayString | read-only | Port capabilities description, include GE/FE/E1/POTS etc. |
| I32 deviceCapEthPortNum | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.27 | Integer32 | read-only | Number of ethernet port supported |
| I32 deviceCapIadPotsPortNum | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.28 | Integer32 | read-only | Number of POTS port of IAD supported |
| I32 deviceCapE1PortNum | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.29 | Integer32 | read-only | Number of E1 port supported |
| I32 deviceCapUQueueTotal | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.30 | Integer32 | read-only | Number of upstream queues |
| I32 deviceCapUQueuePort | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.31 | Integer32 | read-only | Maximum queues per port upstream |
| I32 deviceCapDQueueTotal | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.32 | Integer32 | read-only | Number of downstream queues |
| I32 deviceCapDQueuePort | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.33 | Integer32 | read-only | Maximum queues per port downstream |
| INT deviceCapBattery | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.34 | INTEGER | read-only | Battery Backup |
| INT deviceMulticastSwitch | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.35 | INTEGER | read-write | ONU multicast switch |
| DAT deviceSystemTime | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.36 | DateAndTime | read-write | Current system clock-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579. |
| DAT deviceRestartupTime | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.37 | DateAndTime | read-only | The time of device(OLT or ONU) restartup-time. OCTET-STRING consisting of eleven octets whose contents are defined by RFC2579. |
| INT deviceTrafficServiceStatus | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.38 | INTEGER | read-write | ONU traffic service state. 'enable(1)' indicates the traffic is in-service. 'disable(2)' indicates the traffic is out of service, but is still registered. |
| BIT deviceAlarmMask | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.39 | Bits | read-write | . |
| STR deviceModel | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.40 | DisplayString | read-only | . |
| BIT deviceMulticastFastLeaveAbility | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.41 | Bits | read-only | Fast Leave Mode: If the bit value of 'ctc(0)' is 0, the mode is CTC and non-fast-leave function, if the bit value of 'ctc(0)' is 1, the mode is CTC and fast-leave function; If the bit value of 'snooping(1)' is 0, the mode is snooping and non-fast-leave function, If the bit value of 'snooping(1)' is 1, the mode is snooping and fast-leave function. |
| INT deviceMulticastFastLeaveOperState | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.42 | INTEGER | read-only | Fast Leave Function is active or deactive |
| INT deviceMulticastFastLeaveAdminState | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.43 | INTEGER | read-write | active or deactivate Fast Leave Function |
| I32 onuMacTableAlarmThreshold | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.44 | Integer32 | read-write | onu MAC table alarm threshold |
| I32 onuMacNumbers | 1.3.6.1.4.1.10072.2.20.1.1.1.1.1.45 | Integer32 | read-only | show onu actual mac number |
| gwEponBoard | 1.3.6.1.4.1.10072.2.20.1.1.2 | |||
| gwEponBoardTable | 1.3.6.1.4.1.10072.2.20.1.1.2.1 | not-accessible | table of board informations | |
| gwEponBoardEntry | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1 | not-accessible | An entry in the table, containig status and configrue information about boards | |
| I32 boardIndex | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.1 | Integer32 | read-only | index of boards in unique device which is specified by 'deviceIndex' |
| CHA curBoardType | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.2 | ChassisSlotBoardType | read-only | The value indicates the type of this board. |
| STR boardDescription | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.3 | DisplayString | read-write | The value indicates and confgure board description |
| INT boardActMode | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.4 | INTEGER | read-only | The value indicates acting mode of unique board |
| INT boardOperStatus | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.5 | INTEGER | read-only | The Value indicates board operating status |
| INT boardAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.6 | INTEGER | read-only | The value indicates alarm level for unique board |
| TIK boardLastChangeTime | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.7 | TimeTicks | read-only | the time of last change about this board |
| CHA boardSupprotType | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.8 | ChassisSlotSupportType | read-only | The value indicates the type of board this slot surpports. |
| INT boardReset | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.9 | INTEGER | read-write | The value of this object determines whether reset this board. 'noop(1)' - only read value. 'reset(2)' - only write value, if the active master board is resetted, and another master board is running, then, the two boards will be switchover. |
| I32 boardTemperature | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.10 | Integer32 | read-only | The value indicates the temperature of this board |
| I32 boardEntLogicalIndex | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.11 | Integer32 | read-only | The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous. |
| STR boardEntLogicalCommunity | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.12 | DisplayString | read-only | An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support). |
| STR boardSoftwareVersion | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.13 | DisplayString | read-only | the value indicates the version of software |
| STR boardFirmwareVersion | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.14 | DisplayString | read-only | the value indicates the version of firmware |
| STR boardBootVersion | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.15 | DisplayString | read-only | Boot Version |
| STR boardHardwareVersion | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.16 | DisplayString | read-only | Hardware Version |
| STR boardManufactureDate | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.17 | DisplayString | read-only | Manufacture Date |
| STR boardSerialNo | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.18 | DisplayString | read-only | Manufacture Serial No |
| I32 boardCpuUsage | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.19 | Integer32 | read-only | The percentage of CPU usage |
| I32 boardMemoryUsage | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.20 | Integer32 | read-only | The percentage of used memory |
| INT boardHasSnmpAgent | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.21 | INTEGER | read-only | the object indicates whether there is a SNMP agent running on this board. |
| IP boardSnmpAgentIpAddr | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.22 | IpAddress | read-write | this object indicates and configure IP address of SNMP agent running on this board. now, only GT861's IAD boards surpport this function. |
| STR boardSnmpAgentReadCommunity | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.23 | DisplayString | read-write | the object indicates and configure the read-only community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function. |
| STR boardSnmpAgentWriteCommunity | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.24 | DisplayString | read-write | the object indicates and configure the read-write community of SNMP agent running on the board. now, only GT861's IAD boards surpport this function. |
| I32 boardTemperatureHighThresholds | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.25 | Integer32 | read-write | |
| I32 boardCpuUsageThresholds | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.26 | Integer32 | read-write | |
| I32 boardMemoryUsageThresholds | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.27 | Integer32 | read-write | The percentage of used memory |
| I32 boardMemorySize | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.28 | Integer32 | read-only | |
| I32 boardTemperatureLowThresholds | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.29 | Integer32 | read-write | |
| INT boardAdminStatus | 1.3.6.1.4.1.10072.2.20.1.1.2.1.1.30 | INTEGER | read-write | The desired state of the board. |
| gwEponPon | 1.3.6.1.4.1.10072.2.20.1.1.3 | |||
| ponPortTable | 1.3.6.1.4.1.10072.2.20.1.1.3.1 | not-accessible | table of pon port informations | |
| ponPortEntry | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1 | not-accessible | An entry in the table, containing status and configure information about pon port | |
| I32 ponPortIndex | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.1 | Integer32 | read-only | index of pon port |
| I32 ponPortIfIndex | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.2 | Integer32 | read-only | The value equipped to the index of this pon port in the IF-MIB |
| I32 ponPortDot1dBasePort | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.3 | Integer32 | read-only | port id in the bridge, equipped to the value in the bridge 'dot1dBasePort' |
| I32 ponPortPartnerDev | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.4 | Integer32 | read-only | index of the device which contains parter pon port |
| I32 ponPortPartnerBrd | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.5 | Integer32 | read-only | index of board which contains parter pon port |
| I32 ponPortPartnerPort | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.6 | Integer32 | read-only | partnet physical pon port index |
| I32 ponPortProtectionDev | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.7 | Integer32 | read-write | PON Automatic Protection Switching, index of device |
| I32 ponPortProtectionBrd | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.8 | Integer32 | read-write | PON Automatic Protection Switching, index of board |
| I32 ponPortProtectionPort | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.9 | Integer32 | read-write | PON Automatic Protection Switching, index of pon port |
| INT ponPortType | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.10 | INTEGER | read-only | type of pon port |
| I32 ponPortMaxOnu | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.11 | Integer32 | read-only | The max number of supported ONUs in this PON port. |
| I32 ponPortCurrOnu | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.12 | Integer32 | read-only | The current number of registered ONUs in this PON port. |
| INT ponPortOperStatus | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.13 | INTEGER | read-only | operation status of unique pon port |
| BIT ponPortAlarmStatus | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.14 | Bits | read-only | PON port alarm status, it indicates an alarm with bit=1, if all bit is 0, indicates no alarm. |
| BIT ponPortAlarmMask | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.15 | Bits | read-write | PON Port Alarm mask, the bit=1 indicates mask. |
| I32 ponPortMaxBW | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.16 | Integer32 | read-only | The max bandwidth supported, unit:KB. |
| I32 ponPortActBW | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.17 | Integer32 | read-only | the actual bandwidth, unit:KB. |
| I32 ponPortRemainBW | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.18 | Integer32 | read-only | The current available bandwidth, unit:KB. |
| INT ponPortApsCtrl | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.19 | INTEGER | read-write | PON automatic-protection-switching control. |
| INT ponPortApsStatus | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.20 | INTEGER | read-only | PON automatic-protection-switching status. |
| INT ponPortEncryptSet | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.21 | INTEGER | read-write | Encryption set according to every ONU, this value is ignored when the pon port belongs to OLT. |
| INT ponPortOnuLpbCtrl | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.22 | INTEGER | read-write | ONU Loopback Control, 'noop(1)' is no operation, i.e. the current status is idle; 'lpbStart(2)' is start loopback, only when the object value is 'noop', it can be configurated 'lpbStart(2)', otherwise forbidden, and if success, its value become 'inProcess(4)'; 'lpbStop(3)' is stop loopback, only when the object value is 'inProcess(4)', it can be configurated 'lpbStop(3)', and if success, its value become 'noop(1)'; 'inProcess(4)' is loopbacking status now. |
| INT ponPortOnuLpbSource | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.23 | INTEGER | read-write | Loopback Data Source, 'internal' indicates internal data source, to use testing the link up or down, like ping function; 'external' indicates external data source, to use testing the bandwidth of the ONU ethernet. |
| I32 ponPortOnuLpbTime | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.24 | Integer32 | read-write | Loopback Timeout, if the object value is 0, indicate the loopback is processing at all time, if the value is none 0, indicate the loopback time from begin to end, when the time is end it will be auto-stopped. unit:second. |
| C32 ponPortOnuLpbTxFrmsEx | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.25 | Counter32 | read-only | The number of frames transmit by this ONU Logical Link. |
| C32 ponPortOnuLpbRxFrms | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.26 | Counter32 | read-only | The number of frames transmit by this ONU Logical Link. |
| I32 ponEntLogicalIndex | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.27 | Integer32 | read-only | The value of this object uniquely identifies the logical entity. The value should be a small positive integer; index values for different logical entities are are not necessarily contiguous. |
| STR ponEntLogicalCommunity | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.28 | DisplayString | read-only | An SNMPv1 or SNMPv2C community-string which can be used to access detailed management information for this logical entity. The agent should allow read access with this community string (to an appropriate subset of all managed objects) and may also return a community string based on the privileges of the request used to read this object. Note that an agent may return a community string with read-only privileges, even if this object is accessed with a read- write community string. However, the agent must take care not to return a community string which allows more privileges than the community string used to access this object. A compliant SNMP agent may wish to conserve naming scopes by representing multiple logical entities in a single 'default' naming scope. This is possible when the logical entities represented by the same value of entLogicalCommunity have no object instances in common. For example, 'bridge1' and 'repeater1' may be part of the main naming scope, but at least one additional community string is needed to represent 'bridge2' and 'repeater2'. Logical entities 'bridge1' and 'repeater1' would be represented by sysOREntries associated with the 'default' naming scope. For agents not accessible via SNMPv1 or SNMPv2C, the value of this object is the empty string. This object may also contain an empty string if a community string has not yet been assigned by the agent, or no community string with suitable access rights can be returned for a particular SNMP request. Note that this object is deprecated. Agents which implement SNMPv3 access should use the entLogicalContextEngineID and entLogicalContextName objects to identify the context associated with each logical entity. SNMPv3 agents may return a zero-length string for this object, or may continue to return a community string (e.g., tri-lingual agent support). |
| I32 ponPortLinkedOnuCounter | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.29 | Integer32 | read-only | The current number of linked ONUs in this PON port. |
| INT ponPortAdminStatus | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.30 | INTEGER | read-write | The desired state of the PON port. |
| INT ponPortReset | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.31 | INTEGER | read-write | PON interface reset. |
| INT ponPortWindowRange | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.32 | INTEGER | read-write | The max window range of ONU register. |
| INT ponPortDownlinkPolicingEbl | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.33 | INTEGER | read-write | Config onu downlink-policer enable |
| ONU ponPortAllOnuAlmLevel | 1.3.6.1.4.1.10072.2.20.1.1.3.1.1.34 | OnuAlarmLevelList | read-only | All ONUs alarm-level list. |
| ponOnuMapTable | 1.3.6.1.4.1.10072.2.20.1.1.3.2 | not-accessible | table of pon-ONU map | |
| ponOnuMapEntry | 1.3.6.1.4.1.10072.2.20.1.1.3.2.1 | not-accessible | An entry in the table | |
| I32 mappingOnuIndex | 1.3.6.1.4.1.10072.2.20.1.1.3.2.1.1 | Integer32 | read-only | index of mapping onu |
| I32 onuDevIndex | 1.3.6.1.4.1.10072.2.20.1.1.3.2.1.2 | Integer32 | read-only | device index of this ONU |
| STR onuName | 1.3.6.1.4.1.10072.2.20.1.1.3.2.1.3 | DisplayString | read-only | device name of this ONU |
| ponPerfMonTable | 1.3.6.1.4.1.10072.2.20.1.1.3.3 | not-accessible | Table of pon performence | |
| ponPerfMonEntry | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1 | not-accessible | An entry in the table, containing pon performence monitor information . | |
| C32 ponPerfBER | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.1 | Counter32 | read-only | byte error rate of specified pon port upstream, UNIT: 10E-6 |
| C32 ponPerfFER | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.4 | Counter32 | read-only | frame error rate of specified pon port downstream, UNIT: 10E-6 |
| INT ponPerfBerAlmEnable | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.5 | INTEGER | read-write | The value indicates whether enable pon performence BER alarm |
| INT ponPerfFerAlmEnable | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.6 | INTEGER | read-write | The value indicates whether enable pon performence FER alarm |
| C32 ponPerfUpBandwidth | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.7 | Counter32 | read-only | the value indicates upstream bandwidth on this port |
| C32 ponPerfDownBandwidth | 1.3.6.1.4.1.10072.2.20.1.1.3.3.1.8 | Counter32 | read-only | the value indicates downstream bandwidth on this port |
| ponHisCtrlTable | 1.3.6.1.4.1.10072.2.20.1.1.3.4 | not-accessible | Table of pon performence | |
| ponHisCtrlEntry | 1.3.6.1.4.1.10072.2.20.1.1.3.4.1 | not-accessible | An entry in the table, containing pon performence monitor information . | |
| INT ponHis15MinuteEnable | 1.3.6.1.4.1.10072.2.20.1.1.3.4.1.1 | INTEGER | read-write | The value indicates whether enable history statistic with interval 15 minutes |
| INT ponHis24HourEnable | 1.3.6.1.4.1.10072.2.20.1.1.3.4.1.2 | INTEGER | read-write | The value indicates whether enable history statistic with interval 24 hours |
| I32 ponBERThreashold | 1.3.6.1.4.1.10072.2.20.1.1.3.5 | Integer32 | read-write | Ber measurement threshold, the value defination: 0=1e-0=1, 1=1e-1=0.1,...... |
| I32 ponFERThreashold | 1.3.6.1.4.1.10072.2.20.1.1.3.6 | Integer32 | read-write | Fer measurement threshold, the value defination: 0=1.00e-0=1, 1=1.00e-1=0.1,...... |
| gwEponPonCtcExt | 1.3.6.1.4.1.10072.2.20.1.1.3.7 | |||
| I32 gwEponPonCtcExtOamDiscoveryTiming | 1.3.6.1.4.1.10072.2.20.1.1.3.7.1 | Integer32 | read-write | extended oam discovery timing, unit: ms |
| STR gwEponPonCtcExtOamCtcOui | 1.3.6.1.4.1.10072.2.20.1.1.3.7.2 | DisplayString | read-write | |
| I32 gwEponPonCtcExtOamCtcVer | 1.3.6.1.4.1.10072.2.20.1.1.3.7.3 | Integer32 | read-write | CTC ext-oam version |
| I32 gwEponPonCtcEncrypUpdKeyTime | 1.3.6.1.4.1.10072.2.20.1.1.3.7.4 | Integer32 | read-write | Update key time, unit: s |
| I32 gwEponPonCtcEncrypNoReplyTimeout | 1.3.6.1.4.1.10072.2.20.1.1.3.7.5 | Integer32 | read-write | No reply timeout, unit: ms |
| I32 gwEponPonCtcEncrypTimingThreshold | 1.3.6.1.4.1.10072.2.20.1.1.3.7.6 | Integer32 | read-write | Encryption timing threshold |
| gwEponPonOnuAuth | 1.3.6.1.4.1.10072.2.20.1.1.4 | |||
| INT onuAuthEnable | 1.3.6.1.4.1.10072.2.20.1.1.4.1 | INTEGER | read-write | |
| onuAuthTable | 1.3.6.1.4.1.10072.2.20.1.1.4.2 | not-accessible | The table of ONU authentication based MAC address. | |
| onuAuthEntry | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1 | not-accessible | An entry in the table | |
| I32 eponBoardIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1.1 | Integer32 | read-only | The epon board index |
| I32 eponPonPortIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1.2 | Integer32 | read-only | PON port index |
| I32 onuAuthIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1.3 | Integer32 | read-only | MAC address index |
| MAC onuAuthMacAddress | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1.4 | MacAddress | read-create | MAC address |
| ROW onuAuthRowStatus | 1.3.6.1.4.1.10072.2.20.1.1.4.2.1.5 | RowStatus | read-create | This object indicates the status of this entry. |
| INT onuToPonBindingEnable | 1.3.6.1.4.1.10072.2.20.1.1.4.3 | INTEGER | read-write | |
| onuAuthModeTable | 1.3.6.1.4.1.10072.2.20.1.1.4.4 | not-accessible | The table of ONU authentication Mode. | |
| onuAuthModeEntry | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1 | not-accessible | An entry in the table | |
| I32 onuAuthModeBrdIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1.1 | Integer32 | read-only | |
| I32 onuAuthModePonIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1.2 | Integer32 | read-only | |
| INT onuAuthMode | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1.3 | INTEGER | read-write | 'macAddr(1)' : based ONU MAC address. 'loid(2)' : based ONU logical ID. 'hybrid(3)' : based both macAddr and loid. 'loidNoPwd(4) : based loid, but not check password. 'hybridNoPwd(5)' : based hybrid, but not check password. |
| INT onuAuthEnableForPon | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1.4 | INTEGER | read-write | Description |
| INT onuAuthEntryReorganize | 1.3.6.1.4.1.10072.2.20.1.1.4.4.1.5 | INTEGER | read-write | For PonPort |
| onuAuthLoidTable | 1.3.6.1.4.1.10072.2.20.1.1.4.5 | not-accessible | The table of ONU authentication based LOID(Logical ONU ID). | |
| onuAuthLoidEntry | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1 | not-accessible | An entry in the table | |
| I32 onuAuthLoidBrdIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.1 | Integer32 | read-only | |
| I32 onuAuthLoidPonIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.2 | Integer32 | read-only | |
| I32 onuAuthLoidIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.3 | Integer32 | read-only | |
| STR onuAuthLoid | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.4 | DisplayString | read-create | |
| STR onuAuthLoidPassword | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.5 | DisplayString | read-create | |
| I32 onuAuthLoidDevIdx | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.6 | Integer32 | read-create | |
| ROW onuAuthLoidRowStatus | 1.3.6.1.4.1.10072.2.20.1.1.4.5.1.7 | RowStatus | read-create | This object indicates the status of this entry. |
| onuUnauthenticatedTable | 1.3.6.1.4.1.10072.2.20.1.1.4.6 | not-accessible | The table of unauthenticated ONUs based MAC address. | |
| onuUnauthenticatedEntry | 1.3.6.1.4.1.10072.2.20.1.1.4.6.1 | not-accessible | An entry in the table | |
| I32 eponUnauthenticatedBoardIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.6.1.1 | Integer32 | read-only | The epon board index |
| I32 eponUnauthenticatedPonPortIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.6.1.2 | Integer32 | read-only | PON port index |
| I32 onuUnauthenticatedIndex | 1.3.6.1.4.1.10072.2.20.1.1.4.6.1.3 | Integer32 | read-only | MAC address index |
| MAC onuUnauthenticatedMacAddress | 1.3.6.1.4.1.10072.2.20.1.1.4.6.1.4 | MacAddress | read-only | MAC address |
| INT onuAuthEntryReorganizeForAll | 1.3.6.1.4.1.10072.2.20.1.1.4.9 | INTEGER | read-write | |
| gwEponLlid | 1.3.6.1.4.1.10072.2.20.1.1.5 | |||
| ponLlidTable | 1.3.6.1.4.1.10072.2.20.1.1.5.1 | not-accessible | Table of the pon llid information | |
| ponLlidEntry | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1 | not-accessible | An entry in the table, containing status or configure information | |
| I32 ponLlidIndex | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.1 | Integer32 | read-only | The pon logic link index |
| INT ponLlidType | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.2 | INTEGER | read-only | type of pon logic link |
| I32 ponLlidOltBoard | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.3 | Integer32 | read-create | The value equals to entPhysicalIndex in ENTITY-MIB |
| I32 ponLlidOltPort | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.4 | Integer32 | read-create | the pon port id |
| I32 ponLlidOltPortIfIndex | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.5 | Integer32 | read-create | ifIndex of the olt port |
| I32 ponLlidOnuPortIfIndex | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.6 | Integer32 | read-create | ifIndex of the onu port |
| I32 ponLlidOnuBoard | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.7 | Integer32 | read-create | The value indicates board id for this LLID |
| I32 ponLlidOnuPort | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.8 | Integer32 | read-create | The value indicates onu port for this LLID |
| I32 ponLlidLLID | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.9 | Integer32 | read-only | the vlaue of LLID |
| I32 ponLlidIfIndex | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.10 | Integer32 | read-only | The value equals to ''ifIndex'' in IF-MIB according this object' |
| I32 ponLlidUpFixedBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.11 | Integer32 | read-create | upstream fixed bandwidth about this pon port, unit:KBps |
| I32 ponLlidDownFixedBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.12 | Integer32 | read-write | upstream fixed bandwidth about this pon port, unit:KBps, not support |
| STR ponLlidDesc | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.13 | DisplayString | read-create | description of the LLID |
| I32 ponLlidSurportMacNum | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.14 | Integer32 | read-create | The value of maximum MAC addresses |
| MAC ponLlidOnuMacAddress | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.15 | MacAddress | read-create | The value indicates and confgure onu MAC address |
| ROW ponLlidRowStatus | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.16 | RowStatus | read-create | row status of this entry |
| I32 ponLlidUpBWClass | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.17 | Integer32 | read-create | upstream class level for this pon port bandwidth allocation |
| INT ponLlidUpDelay | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.18 | INTEGER | read-write | upstream delay level for this pon port bandwidth allocation |
| I32 ponLlidUpAssuredBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.19 | Integer32 | read-create | upstream assured bandwidth about this pon port, unit:KBps |
| I32 ponLlidUpBesteffortBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.20 | Integer32 | read-create | upstream best-effort bandwidth about this pon port, unit:KBps |
| I32 ponLlidDownBWClass | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.21 | Integer32 | read-write | upstream class level for this pon port bandwidth allocation |
| INT ponLlidDownDelay | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.22 | INTEGER | read-write | upstream delay level for this pon port bandwidth allocation |
| I32 ponLlidDownAssuredBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.23 | Integer32 | read-create | downstream assured bandwidth about this pon port, unit:KBps |
| I32 ponLlidDownBesteffortBW | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.24 | Integer32 | read-write | downstream best-effort bandwidth about this pon port, unit:KBps |
| INT ponLlidCtcFecAbility | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.25 | INTEGER | read-only | FEC ability |
| INT ponLlidCtcFecMode | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.26 | INTEGER | read-write | FEC mode, unknown(1)-initializing, true state not yet known. enable(2)-activate FEC. disable(3)-deactivate FEC. |
| INT ponLlidCtcEncrypCtrl | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.27 | INTEGER | read-write | CTC encryption control |
| I32 ponLlidCtcDbaQueSetNum | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.28 | Integer32 | read-write | DBA queue set number |
| INT ponLlidCtcDbaQueSetCfgStatus | 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29 | INTEGER | read-write | The Queue sets configuration status, this object value is always 'noop(1)' when read, 'get(2)' will refresh the object of ponLlidCtcDbaQueSetNum and the table of ponLlidCtcDbaQueSetTable, 'set(3)' will config the data, include ponLlidCtcDbaQueSetNum and ponLlidCtcDbaQueSetTable. 'get(2)' and 'set(3) are only write value. |
| ponLlidCtcDbaQueSetTable | 1.3.6.1.4.1.10072.2.20.1.1.5.2 | not-accessible | Table of the pon llid DBA information | |
| ponLlidCtcDbaQueSetEntry | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1 | not-accessible | CTC DBA entry | |
| I32 ponLlidCtcDbaQueSetIndex | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.1 | Integer32 | read-only | The DBA queue-sets index |
| BIT ponLlidCtcDbaReportBitmap | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.2 | Bits | read-write | bit=0 - queue x report is not present, bit=1 - queue x report is present |
| I32 ponLlidCtcDbaQueue0Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.3 | Integer32 | read-write | Queue0 threshold |
| I32 ponLlidCtcDbaQueue1Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.4 | Integer32 | read-write | Queue1 threshold |
| I32 ponLlidCtcDbaQueue2Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.5 | Integer32 | read-write | Queue2 threshold |
| I32 ponLlidCtcDbaQueue3Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.6 | Integer32 | read-write | Queue3 threshold |
| I32 ponLlidCtcDbaQueue4Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.7 | Integer32 | read-write | Queue4 threshold |
| I32 ponLlidCtcDbaQueue5Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.8 | Integer32 | read-write | Queue5 threshold |
| I32 ponLlidCtcDbaQueue6Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.9 | Integer32 | read-write | Queue6 threshold |
| I32 ponLlidCtcDbaQueue7Threshold | 1.3.6.1.4.1.10072.2.20.1.1.5.2.1.10 | Integer32 | read-write | Queue7 threshold |
| gwDevTrapGroup | 1.3.6.1.4.1.10072.2.20.1.1.6 | |||
| NTF onuNewRegSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.1 | A new ONU register success. | ||
| NTF onuReregSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.2 | An ONU reregister success. | ||
| NTF onuNotPresent | 1.3.6.1.4.1.10072.2.20.1.1.6.3 | An ONU is not present alarm | ||
| NTF devPowerOff | 1.3.6.1.4.1.10072.2.20.1.1.6.4 | device Power Off Alarm | ||
| NTF devPowerOn | 1.3.6.1.4.1.10072.2.20.1.1.6.5 | device Power On Alarm | ||
| NTF cfgDataSaveSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.6 | saving config data to flash successfully | ||
| NTF cfgDataSaveFail | 1.3.6.1.4.1.10072.2.20.1.1.6.7 | saving config data to flash unsuccessfully | ||
| NTF flashClearSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.8 | clear config data successfully | ||
| NTF flashClearFail | 1.3.6.1.4.1.10072.2.20.1.1.6.9 | clear config data unsuccessfully | ||
| NTF softwareUpdateSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.10 | update software successfully | ||
| NTF softwareUpdateFail | 1.3.6.1.4.1.10072.2.20.1.1.6.11 | update software unsuccessfully | ||
| NTF firmwareUpdateSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.12 | firmware update successfully | ||
| NTF firmwareUpdateFail | 1.3.6.1.4.1.10072.2.20.1.1.6.13 | update firmware unsuccessfully | ||
| NTF cfgDataBackupSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.14 | backup configuration data to NMS successfully. | ||
| NTF cfgDataBackupFail | 1.3.6.1.4.1.10072.2.20.1.1.6.15 | backup configuration data to NMS unsuccessfully. | ||
| NTF cfgDataRestoreSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.16 | restore configuration data from NMS successfully. | ||
| NTF cfgDataRestoreFail | 1.3.6.1.4.1.10072.2.20.1.1.6.17 | restore configuration data from NMS unsuccessfully. | ||
| NTF autoProtectSwitch | 1.3.6.1.4.1.10072.2.20.1.1.6.18 | Auto Protect Switch(APS) occurs | ||
| NTF cpuUsageFactorHigh | 1.3.6.1.4.1.10072.2.20.1.1.6.19 | high cpu usage factor alarm | ||
| NTF ponPortBERAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.20 | pon port BER alarm | ||
| NTF ponPortBERAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.21 | pon port BER alarm clear | ||
| NTF ponPortFERAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.22 | pon port FER alarm | ||
| NTF ponPortFERAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.23 | pon port FER alarm clear | ||
| NTF llidActBWExceeding | 1.3.6.1.4.1.10072.2.20.1.1.6.24 | llid bandwidth exceed the limit | ||
| NTF llidActBWExceedingClear | 1.3.6.1.4.1.10072.2.20.1.1.6.25 | llid bandwidth return to appropriate value | ||
| NTF devBoardInterted | 1.3.6.1.4.1.10072.2.20.1.1.6.26 | insert a board | ||
| NTF devBoardPull | 1.3.6.1.4.1.10072.2.20.1.1.6.27 | pull a board out | ||
| NTF powerOffAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.30 | power OFF alarm | ||
| NTF powerOnAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.31 | power ON alarm | ||
| NTF boardTemperatureHigh | 1.3.6.1.4.1.10072.2.20.1.1.6.32 | board temperature high alarm | ||
| NTF boardTemperatureHighClear | 1.3.6.1.4.1.10072.2.20.1.1.6.33 | board temperature high alarm clear | ||
| NTF ponBoardReset | 1.3.6.1.4.1.10072.2.20.1.1.6.34 | PON board reset event occur | ||
| NTF swBoardProtectedSwitch | 1.3.6.1.4.1.10072.2.20.1.1.6.35 | sw board protected switch event occur | ||
| NTF ponPortAbnormal | 1.3.6.1.4.1.10072.2.20.1.1.6.36 | abnormal status on PON port occur | ||
| NTF onuRegisterConflict | 1.3.6.1.4.1.10072.2.20.1.1.6.37 | onu register conflict | ||
| NTF firmwareLoadSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.38 | firmware load successfully | ||
| NTF firmwareLoadFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.39 | firmware load fail | ||
| NTF dbaUpdateSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.40 | update dba successfully | ||
| NTF dbaUpdateFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.41 | update dba faul | ||
| NTF dbaLoadSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.42 | load dba successfully | ||
| NTF dbaLoadFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.43 | load dba fail | ||
| NTF ponToEthLinkdown | 1.3.6.1.4.1.10072.2.20.1.1.6.44 | . | ||
| NTF ponToEthLinkup | 1.3.6.1.4.1.10072.2.20.1.1.6.45 | . | ||
| NTF onuSoftwareLoadSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.46 | load onu software successfully | ||
| NTF onuSoftwareLoadFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.47 | load onu software fail | ||
| NTF ethLinkdown | 1.3.6.1.4.1.10072.2.20.1.1.6.54 | Ethernet port linkdown alarm. | ||
| NTF ethLinkup | 1.3.6.1.4.1.10072.2.20.1.1.6.55 | Ethernet port linkup alarm. | ||
| NTF bootUpdateSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.56 | boot firmware update successfully notification | ||
| NTF bootUpdateFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.57 | boot firmware update fail notification | ||
| NTF batFileBackupSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.58 | bat file backup successfully notification | ||
| NTF batFileBackupFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.59 | bat file backup fail notification | ||
| NTF batFileRestoreSuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.60 | bat file restore successfully notification | ||
| NTF batFileRestoreFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.61 | bat file restore fail notification | ||
| NTF onuRegAuthFailure | 1.3.6.1.4.1.10072.2.20.1.1.6.62 | Illegal ONU register. | ||
| NTF deviceColdStart | 1.3.6.1.4.1.10072.2.20.1.1.6.63 | Only report OLT cold start. this trap is not sent if a devPowerOn trap is sent for the same restart. Implementation of this trap is optional. | ||
| NTF deviceWarmStart | 1.3.6.1.4.1.10072.2.20.1.1.6.64 | Only report OLT warm start. | ||
| NTF deviceExceptionRestart | 1.3.6.1.4.1.10072.2.20.1.1.6.65 | Only report OLT restart because of exception. | ||
| NTF ethLoopAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.84 | Ethernet port loop alarm. | ||
| NTF ethLoopAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.85 | Ethernet port loop clear. | ||
| NTF onuLoopAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.86 | Onu loop alarm. | ||
| NTF onuLoopAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.87 | Onu loop clear. | ||
| NTF backboneEthLinkdown | 1.3.6.1.4.1.10072.2.20.1.1.6.88 | Ethernet port linkdown alarm. | ||
| NTF backboneEthLinkup | 1.3.6.1.4.1.10072.2.20.1.1.6.89 | Ethernet port linkup alarm. | ||
| NTF boardCpuUsageAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.116 | cpu usage factor alarm | ||
| NTF boardCpuUsageAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.117 | cpu usage factor alarm clear | ||
| NTF boardMemoryUsageAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.118 | |||
| NTF boardMemoryUsageAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.119 | |||
| NTF ponPortFullAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.132 | |||
| NTF ponPortAbnormalClear | 1.3.6.1.4.1.10072.2.20.1.1.6.133 | |||
| NTF ethPortBroadCastFloodControl | 1.3.6.1.4.1.10072.2.20.1.1.6.136 | Ethernet port broadcast flood alarm. | ||
| NTF ethPortBroadCastFloodControlClear | 1.3.6.1.4.1.10072.2.20.1.1.6.137 | Ethernet port broadcast flood alarm clear. | ||
| NTF sysfileUploadsuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.138 | |||
| NTF sysfileUploadfailure | 1.3.6.1.4.1.10072.2.20.1.1.6.139 | |||
| NTF sysfileDownloadsuccess | 1.3.6.1.4.1.10072.2.20.1.1.6.140 | |||
| NTF sysfileDownloadfailure | 1.3.6.1.4.1.10072.2.20.1.1.6.141 | |||
| NTF ponPortLosAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.142 | |||
| NTF ponPortLosAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.143 | |||
| NTF ponFWVersionMismatch | 1.3.6.1.4.1.10072.2.20.1.1.6.144 | |||
| NTF ponFWVersionMatch | 1.3.6.1.4.1.10072.2.20.1.1.6.145 | |||
| NTF ponDBAVersionMismatch | 1.3.6.1.4.1.10072.2.20.1.1.6.146 | |||
| NTF ponDBAVersionMatch | 1.3.6.1.4.1.10072.2.20.1.1.6.147 | |||
| NTF ponSFPTypeMismatch | 1.3.6.1.4.1.10072.2.20.1.1.6.148 | |||
| NTF ponSFPTypeMitch | 1.3.6.1.4.1.10072.2.20.1.1.6.149 | |||
| NTF ponPortBRASAlarm | 1.3.6.1.4.1.10072.2.20.1.1.6.150 | |||
| NTF ponPortBRASAlarmClear | 1.3.6.1.4.1.10072.2.20.1.1.6.151 | |||
| NTF ponPortUpNoTraffic | 1.3.6.1.4.1.10072.2.20.1.1.6.152 | |||
| NTF ponPortUpNoTrafficClear | 1.3.6.1.4.1.10072.2.20.1.1.6.153 | |||
| NTF onuDeletingNotify | 1.3.6.1.4.1.10072.2.20.1.1.6.154 | Illegal ONU register. | ||
| NTF onuMacTableOverFlow | 1.3.6.1.4.1.10072.2.20.1.1.6.208 | onu mac table over flow. | ||
| NTF onuMacTableOverFlowClear | 1.3.6.1.4.1.10072.2.20.1.1.6.209 | onu mac table over flow clear. | ||
| gwAlarmLevelGroup | 1.3.6.1.4.1.10072.2.20.1.1.7 | |||
| I32 onuNotPresentAlmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.1 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 devPowerOffAlmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.2 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ponPortBERAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.3 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ponPortFERAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.4 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 llidActBWExceedingAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.5 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 powerOffAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.6 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 boardTemperatureHighAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.7 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 devBoardPullAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.8 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ethLinkdownAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.9 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 devFanAlarmAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.10 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ethFlrAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.11 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ethFerAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.12 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| I32 ethTransmittalIntermitAlarmLevel | 1.3.6.1.4.1.10072.2.20.1.1.7.13 | Integer32 | read-write | the value indicates an alarm level is set on this event |
| gwConsoleCfgGroup | 1.3.6.1.4.1.10072.2.20.1.1.8 | |||
| INT gwConsoleBaudRate | 1.3.6.1.4.1.10072.2.20.1.1.8.1 | INTEGER | read-write | the baud rate for the system console |
| INT gwConsoleDataBits | 1.3.6.1.4.1.10072.2.20.1.1.8.2 | INTEGER | read-write | the data bits length for the system console |
| INT gwConsoleStopBitSet | 1.3.6.1.4.1.10072.2.20.1.1.8.3 | INTEGER | read-write | the stop bits for the system console |
| INT gwConsoleParitySet | 1.3.6.1.4.1.10072.2.20.1.1.8.4 | INTEGER | read-write | the parity set for the system console |
| INT gwConsoleFlowCtrlSet | 1.3.6.1.4.1.10072.2.20.1.1.8.5 | INTEGER | read-write | the flow control set for the system console |
RFC description
EPON (Ethernet Passive Optical Network) device management including OLT and ONU board types and configurations.
Start monitoring EPON OLT/ONU chassis equipment (vendor unconfirmed, generic OEM MIB) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.