All MIBs › GW-EPON-MIB › ponLlidCtcDbaQueSetCfgStatus
ponLlidCtcDbaQueSetCfgStatus
Module: GW-EPON-MIB
OID (symbolic): GW-EPON-MIB::ponLlidCtcDbaQueSetCfgStatus
OID (numeric): 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: The Queue sets configuration status, this object value is always 'noop(1)' when read, 'get(2)' will refresh the object of ponLlidCtcDbaQueSetNum and the table of ponLlidCtcDbaQueSetTable, 'set(3)' will config the data, include ponLlidCtcDbaQueSetNum and ponLlidCtcDbaQueSetTable. 'get(2)' and 'set(3) are only write value.
What is ponLlidCtcDbaQueSetCfgStatus?
Controls DBA queue-set configuration for this logical link: reading always returns noop, writing get refreshes PONLLIDCTCDBAQUESETNUM and the queue-set table from the device, and writing set pushes PONLLIDCTCDBAQUESETNUM and the queue-set table's configured values down to the device; get and set are write-only trigger values. An admin uses get to pull the live DBA queue configuration before editing it, then set to apply changes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29 snmpwalk -v2c -c public <target> GW-EPON-MIB::ponLlidCtcDbaQueSetCfgStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29.1 snmpget -v2c -c public <target> GW-EPON-MIB::ponLlidCtcDbaQueSetCfgStatus.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29.1 i <value>
Start monitoring EPON OLT/ONU chassis equipment (vendor unconfirmed, generic OEM MIB) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the GW-EPON-MIB::ponLlidCtcDbaQueSetCfgStatus OID value, configure state conditions and alerts, and monitor any EPON OLT/ONU chassis equipment (vendor unconfirmed, generic OEM MIB) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.10072 | gwtt | GWTT-SMI |
| 1.3.6.1.4.1.10072.2 | devices | GWTT-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.10072.2.20 | gwEponMib | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1 | gwEponMibObjects | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1.1 | gwEponCfgGroup | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1.1.5 | gwEponLlid | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1.1.5.1 | ponLlidTable | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1.1.5.1.1 | ponLlidEntry | GW-EPON-MIB |
| 1.3.6.1.4.1.10072.2.20.1.1.5.1.1.29 | ponLlidCtcDbaQueSetCfgStatus | GW-EPON-MIB |