All MIBs › DGS3024-L2MGMT-MIB
Organization: VEGS, Inc.
Last Updated: 2000-07-15
Category: Technology: Switching/L2, Vendor: D-Link
Description: L2 management MIB for D-Link DGS-3024 24-port Gigabit switch covering VLANs, STP, LACP, and L2 switching management.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is DGS3024-L2MGMT-MIB?
DGS3024-L2MGMT-MIB is a D-Link Corp. proprietary MIB defining the Layer 2 network-management information structure for the DGS-3024 switch. Its objects cover device port-count/module inventory, global Layer 2 controls (spanning tree, IGMP snooping, SNMP trap, statistics-counter reset, FDB-table VLAN filter), MAC-notification state/history-size/interval, Telnet/web access state and TCP port, management VLAN ID, LLDP state, and topology-change/link-change/new-root alarm objects. As a configuration/status MIB it lets an administrator confirm Layer 2 control-plane settings (STP, IGMP snooping, management access) on a DGS-3024 switch. It is deployed on the D-Link DGS-3024 switch. Engineers can download the DGS3024-L2MGMT-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in DGS3024-L2MGMT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- D-Link DGS-3024 switch
Monitoring Examples
An administrator checks swL2DevCtrlStpState and swL2DevAlarmTopologyChange to confirm spanning-tree stability on a D-Link DGS-3024 switch.
What Can Be Monitored
- Layer 2 control-plane configuration and topology-change alarms
This MIB depends on
Related MIBs
Imported Objects
From DLINK-ID-REC-MIB
| AgentNotifyLevel |
From SNMPv2-SMI
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks |
From SNMPv2-TC
| DisplayString | |
| RowStatus |
From SWDGS3024PRIMGMT-MIB
| dgs-3024Mgmt |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| swL2MgmtMIB | 1.3.6.1.4.1.171.11.68.1.2 | The Structure of Layer 2 Network Management Information | ||
| swL2DevMgmt | 1.3.6.1.4.1.171.11.68.1.2.1 | |||
| swL2DevInfo | 1.3.6.1.4.1.171.11.68.1.2.1.1 | |||
| INT swDevInfoTotalNumOfPort | 1.3.6.1.4.1.171.11.68.1.2.1.1.1 | INTEGER | read-only | The number of ports within this switch. This value is the sum of the ports within this switch. |
| INT swDevInfoNumOfPortInUse | 1.3.6.1.4.1.171.11.68.1.2.1.1.2 | INTEGER | read-only | The number of ports in this switch connected to the segment or the end stations. |
| swL2DevCtrl | 1.3.6.1.4.1.171.11.68.1.2.1.2 | |||
| INT swL2DevCtrlStpState | 1.3.6.1.4.1.171.11.68.1.2.1.2.1 | INTEGER | read-write | This object can be enabled or disabled spanning tree algorithm during runtime of the system. |
| INT swL2DevCtrlIGMPSnooping | 1.3.6.1.4.1.171.11.68.1.2.1.2.2 | INTEGER | read-write | This object indicates layer 2 Internet Group Management Protocol (IGMP) capture function is enabled or disabled. |
| INT swL2DevCtrlRmonState | 1.3.6.1.4.1.171.11.68.1.2.1.2.3 | INTEGER | read-write | This object can be enabled or disabled RMON. |
| INT swL2DevCtrlCleanAllStatisticCounter | 1.3.6.1.4.1.171.11.68.1.2.1.2.4 | INTEGER | read-write | As the object is set to active, all the statistic counters will be cleared. If set to normal, do nothing. |
| VLA swL2DevCtrlVlanIdOfFDBTbl | 1.3.6.1.4.1.171.11.68.1.2.1.2.5 | VlanId | read-write | Indicates the VLAN ID which the Dot1dTpFdbTable belongs to ; The default value is DEFAULT_VLAN_ID of system . |
| INT swL2MACNotifyState | 1.3.6.1.4.1.171.11.68.1.2.1.2.6 | INTEGER | read-write | This object can enabled or disabled MAC Notification. |
| INT swL2MACNotifyHistorySize | 1.3.6.1.4.1.171.11.68.1.2.1.2.7 | INTEGER | read-write | This object indicates the history size of variation MAC in address table. The default value is 1 . |
| INT swL2MACNotifyInterval | 1.3.6.1.4.1.171.11.68.1.2.1.2.8 | INTEGER | read-write | This object indicates the time interval in second for trigger the MAC notify message. |
| INT swL2PortCtrlMulticastfilter | 1.3.6.1.4.1.171.11.68.1.2.1.2.9 | INTEGER | read-write | This object decide the multicast packets filtering mode on all port . |
| swL2DevAlarm | 1.3.6.1.4.1.171.11.68.1.2.1.3 | |||
| INT swL2DevAlarmNewRoot | 1.3.6.1.4.1.171.11.68.1.2.1.3.1 | INTEGER | read-write | When the device has become the new root of the Spanning Tree, this object decide whether to send a new root trap. |
| INT swL2DevAlarmTopologyChange | 1.3.6.1.4.1.171.11.68.1.2.1.3.2 | INTEGER | read-write | This object determine to send a trap or not when the switch topology was changed. If the object is enabled(3), the topologyChange trap is sent by the device when any of its configured ports transitions from the Learning state to the Forwarding state, or from the Forwarding state to the Blocking state. For the same port tranition, the device doesn't send the trap if this object value is disabled or other. |
| INT swL2DevAlarmLinkChange | 1.3.6.1.4.1.171.11.68.1.2.1.3.3 | INTEGER | read-write | This object determine to send a trap or not when the link was changed. If the object is enabled(3), the Link Change trap is sent by the device when any of its ports link change. The device doesn't send the trap if this object value is disabled or other. |
| swL2PortMgmt | 1.3.6.1.4.1.171.11.68.1.2.3 | |||
| swL2PortInfoTable | 1.3.6.1.4.1.171.11.68.1.2.3.1 | not-accessible | A table that contains information about every port. | |
| swL2PortInfoEntry | 1.3.6.1.4.1.171.11.68.1.2.3.1.1 | not-accessible | A list of information for each port of the device. | |
| INT swL2PortInfoPortIndex | 1.3.6.1.4.1.171.11.68.1.2.3.1.1.1 | INTEGER | read-only | This object indicates the module's port number.(1..Max port number in the module) |
| INT swL2PortInfoUnitID | 1.3.6.1.4.1.171.11.68.1.2.3.1.1.2 | INTEGER | read-only | Indicates ID of the unit in the system |
| INT swL2PortInfoType | 1.3.6.1.4.1.171.11.68.1.2.3.1.1.3 | INTEGER | read-only | This object indicates the connector type of this port. |
| INT swL2PortInfoLinkStatus | 1.3.6.1.4.1.171.11.68.1.2.3.1.1.4 | INTEGER | read-only | This object indicates the port link status. |
| INT swL2PortInfoNwayStatus | 1.3.6.1.4.1.171.11.68.1.2.3.1.1.5 | INTEGER | read-only | This object indicates the port speed and duplex mode. |
| swL2PortCtrlTable | 1.3.6.1.4.1.171.11.68.1.2.3.2 | not-accessible | A table that contains control information about every port. | |
| swL2PortCtrlEntry | 1.3.6.1.4.1.171.11.68.1.2.3.2.1 | not-accessible | A list of control information for each port of the device. | |
| INT swL2PortCtrlPortIndex | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.1 | INTEGER | read-only | This object indicates the module's port number.(1..Max port number in the module) |
| INT swL2PortCtrlUnitIndex | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.2 | INTEGER | read-only | Indicates ID of the unit in the device |
| INT swL2PortCtrlAdminState | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.3 | INTEGER | read-write | This object decide the port enabled or disabled. |
| INT swL2PortCtrlNwayState | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.4 | INTEGER | read-write | Chose the port speed, duplex mode, and N-Way function mode. |
| INT swL2PortCtrlFlowCtrlState | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.5 | INTEGER | read-write | The flow control mechanism is different between full duplex mode and half duplex mode. For half duplex mode, the jamming signal is asserted. For full duplex mode, IEEE 802.3x flow control function sends PAUSE frames and receives PAUSE frames. |
| INT swL2PortCtrlMACNotifyState | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.7 | INTEGER | read-write | This object set each poet MAC notification state. |
| STR swL2PortCtrlDescription | 1.3.6.1.4.1.171.11.68.1.2.3.2.1.9 | DisplayString | read-write | This object decide the description on this port. |
| swL2QOSMgmt | 1.3.6.1.4.1.171.11.68.1.2.6 | |||
| swL2QOSBandwidthControlTable | 1.3.6.1.4.1.171.11.68.1.2.6.1 | not-accessible | . | |
| swL2QOSBandwidthControlEntry | 1.3.6.1.4.1.171.11.68.1.2.6.1.1 | not-accessible | A list of information contained in swL2QOSBandwidthControlTable. | |
| INT swL2QOSBandwidthPortIndex | 1.3.6.1.4.1.171.11.68.1.2.6.1.1.1 | INTEGER | read-only | Indicates the port . |
| INT swL2QOSBandwidthRxRate | 1.3.6.1.4.1.171.11.68.1.2.6.1.1.2 | INTEGER | read-write | Indicates RX Rate(Mbit/sec) of the specifed port. Value 1 means no limit. |
| swL2QOSSchedulingTable | 1.3.6.1.4.1.171.11.68.1.2.6.2 | not-accessible | . | |
| swL2QOSSchedulingEntry | 1.3.6.1.4.1.171.11.68.1.2.6.2.1 | not-accessible | A list of information contained in swL2QOSSchedulingTable. | |
| INT swL2QOSSchedulingClassIndex | 1.3.6.1.4.1.171.11.68.1.2.6.2.1.1 | INTEGER | read-only | Indicates the hardware queue number. |
| INT swL2QOSSchedulingMaxPkts | 1.3.6.1.4.1.171.11.68.1.2.6.2.1.2 | INTEGER | read-write | Indicates the max packet of QOS scheduling. |
| swL2QOS8021pUserPriorityTable | 1.3.6.1.4.1.171.11.68.1.2.6.3 | not-accessible | . | |
| swL2QOS8021pUserPriorityEntry | 1.3.6.1.4.1.171.11.68.1.2.6.3.1 | not-accessible | A list of information contained in swL2QOS8021pUserPriorityTable. | |
| INT swL2QOS8021pUserPriorityIndex | 1.3.6.1.4.1.171.11.68.1.2.6.3.1.1 | INTEGER | read-only | The 802.1p user priority . |
| INT swL2QOS8021pUserPriorityClass | 1.3.6.1.4.1.171.11.68.1.2.6.3.1.2 | INTEGER | read-write | The number of the switch's hardware priority queue. The switch has four hardware priority queues available. They are numbered between 0 (the lowest priority) and 3 (the highest priority). |
| swL2QOS8021pDefaultPriorityTable | 1.3.6.1.4.1.171.11.68.1.2.6.4 | not-accessible | . | |
| swL2QOS8021pDefaultPriorityEntry | 1.3.6.1.4.1.171.11.68.1.2.6.4.1 | not-accessible | A list of information contained in swL2QOS8021pDefaultPriorityTable. | |
| INT swL2QOS8021pDefaultPriorityIndex | 1.3.6.1.4.1.171.11.68.1.2.6.4.1.1 | INTEGER | read-only | Indicates the port number . |
| INT swL2QOS8021pDefaultPriority | 1.3.6.1.4.1.171.11.68.1.2.6.4.1.2 | INTEGER | read-write | The priority value to assign to untagged packets received by the switch ports on the switch.. |
| INT swL2QOSSchedulingMechanismCtrl | 1.3.6.1.4.1.171.11.68.1.2.6.5 | INTEGER | read-write | This object can control QOS scheduling Mechanism. |
| swL2TrunkMgmt | 1.3.6.1.4.1.171.11.68.1.2.9 | |||
| INT swL2TrunkMaxSupportedEntries | 1.3.6.1.4.1.171.11.68.1.2.9.1 | INTEGER | read-only | Maximum number of entries in the trunk configuration table (swL2TrunkCtrlTable). |
| INT swL2TrunkCurrentNumEntries | 1.3.6.1.4.1.171.11.68.1.2.9.2 | INTEGER | read-only | Current actived number of entries in the trunk configuration table. |
| swL2TrunkCtrlTable | 1.3.6.1.4.1.171.11.68.1.2.9.3 | not-accessible | This table specifys which ports group a set of ports(up to 8) into a single logical link. | |
| swL2TrunkCtrlEntry | 1.3.6.1.4.1.171.11.68.1.2.9.3.1 | not-accessible | A list of information specifies which ports group a set of ports(up to 8) into a single logical link. | |
| INT swL2TrunkIndex | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.1 | INTEGER | read-only | The index of logical port trunk. The trunk group number depend on the existence of unit and module. |
| STR swL2TrunkName | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.2 | DisplayString | read-create | The name of logical port trunk. |
| INT swL2TrunkMasterPort | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.3 | INTEGER | read-create | The object indicates the master port number of the port trunk entry. When using Port Trunk, you can not configure the other ports of the group except the master port. Their configuration must be same as the master port (e.g. speed, duplex, enabled/disabled, flow control, and so on). |
| POR swL2TrunkMember | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.4 | PortList | read-create | Indicate how many number of ports is included in this Trunk. The trunk port number depend on the existence of module. The maximum number of ports is 8 for one trunks. |
| INT swL2TrunkFloodingPort | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.5 | INTEGER | read-only | The object indicates the flooding port number of the port trunk entry. The first port of the trunk is implicitly configured to be the flooding port. |
| INT swL2TrunkType | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.6 | INTEGER | read-create | This object indicated that type of the trunk group. static : is static trunk group lacp : is LACP trunk group . |
| ROW swL2TrunkState | 1.3.6.1.4.1.171.11.68.1.2.9.3.1.7 | RowStatus | read-create | This object indicates the status of this entry. |
| INT swL2TrunkAlgorithm | 1.3.6.1.4.1.171.11.68.1.2.9.4 | INTEGER | read-write | This object configures to part of the packet examined by the switch when selecting the egress port for transmitting load-sharing data. |
| swL2TrunkLACPPortTable | 1.3.6.1.4.1.171.11.68.1.2.9.5 | not-accessible | This table specifys which ports group a set of ports(up to 8) into a single logical link. | |
| swL2TrunkLACPPortEntry | 1.3.6.1.4.1.171.11.68.1.2.9.5.1 | not-accessible | A list of information specifies which ports group a set of ports(up to 8) into a single logical link. | |
| INT swL2TrunkLACPPortIndex | 1.3.6.1.4.1.171.11.68.1.2.9.5.1.1 | INTEGER | read-only | The index of logical port lacp. |
| INT swL2TrunkLACPPortState | 1.3.6.1.4.1.171.11.68.1.2.9.5.1.2 | INTEGER | read-write | The state of logical port lacp. |
| swL2MirrorMgmt | 1.3.6.1.4.1.171.11.68.1.2.10 | |||
| INT swL2MirrorLogicSourcePort | 1.3.6.1.4.1.171.11.68.1.2.10.1 | INTEGER | read-write | The port that will be mirrored. All packets entering and leaving the source port can be duplicated in the ingress_target and egress_target port port. The port number is the sequential (logical) number which is also applied to bridge MIB, etc. |
| INT swL2MirrorPortTargetIngress | 1.3.6.1.4.1.171.11.68.1.2.10.2 | INTEGER | read-write | Allows the mirroring of only packets received (flowing into) the port or ports in the port list. |
| INT swL2MirrorPortTargetEgress | 1.3.6.1.4.1.171.11.68.1.2.10.3 | INTEGER | read-write | Allows the mirroring of only packets sent (flowing out of) the port or ports in the port list. |
| INT swL2MirrorPortState | 1.3.6.1.4.1.171.11.68.1.2.10.4 | INTEGER | read-write | This object indicates the port mirroring state. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disabled(2) - writing this value to the object, and then the corresponding entry will be removed from the table. enabled(3) - this entry is reside in the table. |
| swL2IGMPMgmt | 1.3.6.1.4.1.171.11.68.1.2.11 | |||
| INT swL2IGMPMaxSupportedVlans | 1.3.6.1.4.1.171.11.68.1.2.11.1 | INTEGER | read-only | Maximum number of Vlans in the layer 2 IGMP control table (swL2IGMPCtrlTable). |
| INT swL2IGMPMaxIpGroupNumPerVlan | 1.3.6.1.4.1.171.11.68.1.2.11.2 | INTEGER | read-only | Maximum number of multicast ip group per Vlan in the layer 2 IGMP information table (swL2IGMPQueryInfoTable). |
| swL2IGMPCtrlTable | 1.3.6.1.4.1.171.11.68.1.2.11.3 | not-accessible | The table controls the Vlan's IGMP function. Its scale depends on current VLAN state (swL2VlanInfoStatus). If VLAN is disabled mode, there is only one entry in the table, with index 1. If VLAN is in Port-Base or 802.1q mode, the number of entries can be up to 12, with index range from 1 to 12. | |
| swL2IGMPCtrlEntry | 1.3.6.1.4.1.171.11.68.1.2.11.3.1 | not-accessible | The entry in IGMP control table (swL2IGMPCtrlTable). The entry is effective only when IGMP capture switch (swL2DevCtrlIGMPSnooping) is enabled. | |
| INT swL2IGMPCtrlVid | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.1 | INTEGER | read-only | This object indicates the IGMP control entry's VLAN id. If VLAN is disabled, the Vid is always 0 and cannot be changed by management users. If VLAN is in Port-Base mode, the Vid is arranged from 1 to 12, fixed form. If VLAN is in 802.1q mode, the Vid setting can vary from 1 to 4094 by management user, and the Vid in each entry must be unique in the IGMP Control Table. |
| INT swL2IGMPQueryInterval | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.2 | INTEGER | read-write | The frequency at which IGMP Host-Query packets are transmitted on this switch. |
| INT swL2IGMPMaxResponseTime | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.3 | INTEGER | read-write | The maximum query response time on this switch. |
| INT swL2IGMPRobustness | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.4 | INTEGER | read-write | The Robustness Variable allows tuning for the expected packet loss on a subnet. If a subnet is expected to be lossy, the Robustness Variable may be increased. IGMP is robust to (Robustness Variable-1) packet losses. |
| INT swL2IGMPLastMemberQueryInterval | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.5 | INTEGER | read-write | The Last Member Query Interval is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages, and is also the amount of time between Group-Specific Query messages. |
| INT swL2IGMPHostTimeout | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.6 | INTEGER | read-write | The timer value for sending IGMP query packet when none was sent by the host in the LAN. The timer works in per-VLAN basis. Our device will be activated to send the query message if the timer is expired. Please reference RFC2236-1997. |
| INT swL2IGMPRouteTimeout | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.7 | INTEGER | read-write | The Router Timeout is how long a host must wait after hearing a Query before it may send any IGMPv2 messages. |
| INT swL2IGMPLeaveTimer | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.8 | INTEGER | read-write | When a querier receives a Leave Group message for a group that has group members on the reception interface, it sends Group-Specific Queries every swL2IGMPLeaveTimer to the group being left. |
| INT swL2IGMPQueryState | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.9 | INTEGER | read-write | This object decide the IGMP query enabled or disabled. |
| INT swL2IGMPCurrentState | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.10 | INTEGER | read-only | This object indicates the current IGMP query state. |
| INT swL2IGMPCtrlState | 1.3.6.1.4.1.171.11.68.1.2.11.3.1.11 | INTEGER | read-write | This object indicates the status of this entry. other(1) - this entry is currently in use but the conditions under which it will remain so are different from each of the following values. disable(2) - IGMP funtion is disabled for this entry. enable(3) - IGMP funtion is enabled for this entry. |
| swL2IGMPQueryInfoTable | 1.3.6.1.4.1.171.11.68.1.2.11.4 | not-accessible | The table contains the number current IGMP query packets which is captured by this device, as well as the IGMP query packets sent by the device. | |
| swL2IGMPQueryInfoEntry | 1.3.6.1.4.1.171.11.68.1.2.11.4.1 | not-accessible | Information about current IGMP query information, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrState of associated VLAN entry are all enabled. | |
| INT swL2IGMPInfoVid | 1.3.6.1.4.1.171.11.68.1.2.11.4.1.1 | INTEGER | read-only | This object indicates the Vid of associated IGMP info table entry. It follows swL2IGMPCtrlVid in the associated entry of IGMP control table (swL2IGMPCtrlTable). |
| INT swL2IGMPInfoQueryCount | 1.3.6.1.4.1.171.11.68.1.2.11.4.1.2 | INTEGER | read-only | This object indicates the number of query packets received since the IGMP function enabled, in per-VLAN basis. |
| INT swL2IGMPInfoTxQueryCount | 1.3.6.1.4.1.171.11.68.1.2.11.4.1.3 | INTEGER | read-only | This object indicates the send count of IGMP query messages, in per-VLAN basis. In case of IGMP timer expiration, the switch sends IGMP query packets to related VLAN member ports and increment this object by 1. |
| swL2IGMPInfoTable | 1.3.6.1.4.1.171.11.68.1.2.11.5 | not-accessible | The table containing current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. Note that the priority of IGMP table entries is lower than Filtering Table, i.e. if there is a table hash collision between the entries of IGMP Table and Filtering Table inside the switch H/W address table, then Filtering Table entry overwrite the colliding entry of IGMP Table. See swL2FilterMgmt description also. | |
| swL2IGMPInfoEntry | 1.3.6.1.4.1.171.11.68.1.2.11.5.1 | not-accessible | Information about current IGMP information which captured by this device, provided that swL2DevCtrlIGMPSnooping and swL2IGMPCtrlState of associated VLAN entry are all enabled. | |
| INT swL2IGMPVid | 1.3.6.1.4.1.171.11.68.1.2.11.5.1.1 | INTEGER | read-only | This object indicates the Vid of individual IGMP table entry. It shows the Vid of IGMP report information captured on network. |
| IP swL2IGMPGroupIpAddr | 1.3.6.1.4.1.171.11.68.1.2.11.5.1.2 | IpAddress | read-only | This object is identify group ip address which is captured from IGMP packet, in per-Vlan basis. |
| MAC swL2IGMPMacAddr | 1.3.6.1.4.1.171.11.68.1.2.11.5.1.3 | MacAddress | read-only | This object is identify mac address which is corresponding to swL2IGMPGroupIpAddr, in per-Vlan basis. |
| POR swL2IGMPPortMap | 1.3.6.1.4.1.171.11.68.1.2.11.5.1.4 | PortList | read-only | This object indicates which ports are belong to the same multicast group, in per-Vlan basis. Each multicast group has a octect string to indicate with port map. The most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the switch is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'(Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant). The 4 octets is represent one unit port according its logic port. If the unit less 32 port, the other port don't care just fill zero. |
| INT swL2IGMPIpGroupReportCount | 1.3.6.1.4.1.171.11.68.1.2.11.5.1.5 | INTEGER | read-only | This object indicate how much report packet was receive by our device corresponding with this entry from IGMP function enabled, in per-Vlan basis. |
| swL2TrafficMgmt | 1.3.6.1.4.1.171.11.68.1.2.13 | |||
| INT swL2TrafficCtrlBMStromthreshold | 1.3.6.1.4.1.171.11.68.1.2.13.1 | INTEGER | read-write | This object to decide how much thousand packets per second broadcast/multicast (depend on swL2TrafficCtrlBcastStromCtrl, swL2TrafficCtrlMcastStromCtrl or swL2TrafficCtrlDlfStromCtrl objects whether is enabled) will active storm control. Whenever a port reaches its configured amount of packets in the one second time interval, the device will start dropping that type of packet, until the time interval has expired. Once the time interval has expired, the device will start forwarding that type of packet. |
| INT swL2TrafficCtrlBcastStromCtrl | 1.3.6.1.4.1.171.11.68.1.2.13.2 | INTEGER | read-only | This object indicates broadcast storm control function is enabled or disabled. |
| INT swL2TrafficCtrlMcastStromCtrl | 1.3.6.1.4.1.171.11.68.1.2.13.3 | INTEGER | read-write | This object indicates multicast storm control function is enabled or disabled. |
| INT swL2TrafficCtrlDlfStromCtrl | 1.3.6.1.4.1.171.11.68.1.2.13.4 | INTEGER | read-write | This object indicates destination lookup fail function is enabled or disabled. |
| swL2TrafficPortCtrlTable | 1.3.6.1.4.1.171.11.68.1.2.13.5 | not-accessible | This table specifys the storm traffic control configuration. | |
| swL2TrafficPortCtrlEntry | 1.3.6.1.4.1.171.11.68.1.2.13.5.1 | not-accessible | A list of information specifies the storm traffic control configuration. | |
| INT swL2TrafficCtrlGroupIndex | 1.3.6.1.4.1.171.11.68.1.2.13.5.1.1 | INTEGER | read-only | The index of logical port trunk. The trunk group number depend on the existence of unit and module. |
| INT swL2TrafficCtrlPortStatus | 1.3.6.1.4.1.171.11.68.1.2.13.5.1.3 | INTEGER | read-write | This object indicates destination lookup fail function is enabled or disabled. |
| swL2MgmtMIBTraps | 1.3.6.1.4.1.171.11.68.1.2.15 | |||
| swL2Notify | 1.3.6.1.4.1.171.11.68.1.2.15.1 | |||
| swL2NotifyPrefix | 1.3.6.1.4.1.171.11.68.1.2.15.1.2 | |||
| swL2NotifFirmware | 1.3.6.1.4.1.171.11.68.1.2.15.1.2.0 | |||
| NTF swL2macNotification | 1.3.6.1.4.1.171.11.68.1.2.15.1.2.0.1 | This trap indicates the mac addresses variation in address table . | ||
| NTF swL2porttypechg | 1.3.6.1.4.1.171.11.68.1.2.15.1.2.0.2 | This trap indicates the port type change. | ||
| swl2NotificationBidings | 1.3.6.1.4.1.171.11.68.1.2.15.1.2.1 | |||
| OCT swL2macNotifyInfo | 1.3.6.1.4.1.171.11.68.1.2.15.1.2.1.1 | OCTET STRING | read-only | This object indicates the last time reboot information. |
RFC description
D-Link DGS3024 Layer 2 switch management with VLAN, trunk, mirror, and IGMP configuration.
Start monitoring D-Link DGS-3024 switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.