G6-STP-MIB

All MIBs › G6-STP-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Protocol: STP, Technology: Switching/L2, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for Spanning Tree Protocol configuration and port/bridge state management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-STP-MIB?

G6-STP-MIB is a MICROSENS private MIB for the Generation 6 switch family that configures Spanning Tree Protocol variants (STP/RSTP/MSTP) at the bridge level to prevent Layer 2 loops. It exposes bridge-wide configuration objects including STP mode, bridge priority, hello time, max age, forward delay, transmit hold count, the IEEE path cost model, and MSTP-specific region name and revision level. Its monitoring value is centered on network topology/configuration correctness, letting an admin confirm bridge parameters are consistent across a network to avoid topology instability, though it is configuration-state focused rather than reporting real-time port state changes or root bridge election results. No explicit dependency on other MIBs is indicated, though it parallels concepts from the standard BRIDGE-MIB and its RSTP/MSTP extensions. It is deployed on MICROSENS G6-series switches in Layer 2 networks using redundant links protected by spanning tree, where G6-STP-MIB SNMP monitoring helps confirm bridge parameters remain consistent across the topology.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-STP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6-series Ethernet switch

Monitoring Examples

An admin diagnosing inconsistent spanning tree behavior across switches would compare bridgeConfigTable/bridgeConfigEntry values for bridgeConfigMode, bridgeConfigPriority, bridgeConfigHelloTime, and bridgeConfigMaxAge across devices to find a mismatched timer or priority causing unexpected root bridge changes. For an MSTP deployment, bridgeConfigMstpRegionName and bridgeConfigMstpRevisionLevel would be checked to confirm all switches agree on the same MST region, since a mismatch would incorrectly segment the network into separate regions.

What Can Be Monitored

STP/RSTP/MSTP mode
bridge priority
hello time, max age, forward delay
MSTP region name and revision level

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
protocol	1.3.6.1.4.1.3181.10.6.2			Microsens private MIB for Generation 6 Ethernet Switches
stp	1.3.6.1.4.1.3181.10.6.2.42
bridgeConfigTable	1.3.6.1.4.1.3181.10.6.2.42.1		not-accessible	Configuration parameter concerning the general bridge setttings
bridgeConfigEntry	1.3.6.1.4.1.3181.10.6.2.42.1.1		not-accessible
INT bridgeConfigIndex	1.3.6.1.4.1.3181.10.6.2.42.1.1.1	INTEGER	not-accessible	Automatically generated
INT bridgeConfigMode	1.3.6.1.4.1.3181.10.6.2.42.1.1.2	INTEGER	read-write	Set base operating mode of spanning tree protocol.
I32 bridgeConfigPriority	1.3.6.1.4.1.3181.10.6.2.42.1.1.3	Integer32	read-write	The value of the writeable portion of the Bridge ID.
I32 bridgeConfigHelloTime	1.3.6.1.4.1.3181.10.6.2.42.1.1.4	Integer32	read-write	The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in seconds.
I32 bridgeConfigMaxAge	1.3.6.1.4.1.3181.10.6.2.42.1.1.5	Integer32	read-write	The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in seconds.
I32 bridgeConfigForwardDelay	1.3.6.1.4.1.3181.10.6.2.42.1.1.6	Integer32	read-write	Bridge forward delay in seconds.
I32 bridgeConfigTxHoldCount	1.3.6.1.4.1.3181.10.6.2.42.1.1.7	Integer32	read-write	Limits the maximum transmission rate.
INT bridgeConfigIeeePathCostModel	1.3.6.1.4.1.3181.10.6.2.42.1.1.8	INTEGER	read-write	Defines to which standard the admin_path_cost are compliant.
STR bridgeConfigMstpRegionName	1.3.6.1.4.1.3181.10.6.2.42.1.1.9	DisplayString	read-write
I32 bridgeConfigMstpRevisionLevel	1.3.6.1.4.1.3181.10.6.2.42.1.1.10	Integer32	read-write
I32 bridgeConfigMstpMaxHops	1.3.6.1.4.1.3181.10.6.2.42.1.1.11	Integer32	read-write	Defines the initial value of remaining hops for MSTI information generated at the boundary of an MSTI region.
U32 bridgeConfigMstpStpAgingTime	1.3.6.1.4.1.3181.10.6.2.42.1.1.12	Unsigned32	read-write	This parameter is used only when MSTP is forced into STP mode for rapid aging.
portConfigTable	1.3.6.1.4.1.3181.10.6.2.42.2		not-accessible	Configuration parameter concerning the port specific STP setttings
portConfigEntry	1.3.6.1.4.1.3181.10.6.2.42.2.1		not-accessible
INT portConfigPortIndex	1.3.6.1.4.1.3181.10.6.2.42.2.1.1	INTEGER	not-accessible	Automatically generated
INT portConfigEnable	1.3.6.1.4.1.3181.10.6.2.42.2.1.2	INTEGER	read-write	Enable (R)STP for this port.
I32 portConfigPriority	1.3.6.1.4.1.3181.10.6.2.42.2.1.3	Integer32	read-write	Port priority value.
INT portConfigAdminP2pPort	1.3.6.1.4.1.3181.10.6.2.42.2.1.4	INTEGER	read-write	A value of forceTrue indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse indicates that this port should be treated as having a shared media connection.
INT portConfigAdminEdgePort	1.3.6.1.4.1.3181.10.6.2.42.2.1.5	INTEGER	read-write	When enabled this port is assumed to be an edge port.
U32 portConfigAdminPathCost	1.3.6.1.4.1.3181.10.6.2.42.2.1.6	Unsigned32	read-write	The contribution of this port to the path cost of paths towards the spanning tree root which include this port.
STR portConfigProtocolMigration	1.3.6.1.4.1.3181.10.6.2.42.2.1.7	DisplayString	read-write	When operating in RSTP mode, setting this object forces this port to transmit RSTP BPDUs.
INT portConfigBridgeAssurance	1.3.6.1.4.1.3181.10.6.2.42.2.1.8	INTEGER	read-write	The bridge assurance is used to detectunidirectional link failures or remote devices that stop sending spanning tree information due to a software fault. Important: Only enable when the other directly connected switches also support this feature.
I32 portConfigMstpDefaultPriority	1.3.6.1.4.1.3181.10.6.2.42.2.1.9	Integer32	read-write	The port priority used in all MSTP instances unless otherwise configured in mstp_port_priority.
STR portConfigMstpPortPriority	1.3.6.1.4.1.3181.10.6.2.42.2.1.10	DisplayString	read-write	The port priority used in all specific MSTP instances. Syntax: mstp_id:port_priority. E.g.: 1:32, 2:128, 5:128
U32 portConfigMstpDefaultAdminPathCost	1.3.6.1.4.1.3181.10.6.2.42.2.1.11	Unsigned32	read-write	The port path cost used in all MSTP instances unless otherwise configured in mstp_port_admin_path_cost.
STR portConfigMstpPortAdminPathCost	1.3.6.1.4.1.3181.10.6.2.42.2.1.12	DisplayString	read-write	The port path cost used in specific MSTP instances. Syntax: mstp_id:port_path_cost. E.g.: 1:4, 2:100
INT portConfigBpduGuard	1.3.6.1.4.1.3181.10.6.2.42.2.1.13	INTEGER	read-write	When enabled STP attempts from a user port are blocked. This prevents a malicious user from influencing the overall network routing.
INT portConfigBpduReceiveOnly	1.3.6.1.4.1.3181.10.6.2.42.2.1.14	INTEGER	read-write	When enabled this port listens to incoming BPDU packets for spanning tree algorithm but never transmits any.
INT portConfigRestrictTcn	1.3.6.1.4.1.3181.10.6.2.42.2.1.15	INTEGER	read-write	When enabled the port does not forward topology change notification BPDUs.
INT portConfigRestrictRoot	1.3.6.1.4.1.3181.10.6.2.42.2.1.16	INTEGER	read-write	When enabled this port cannot become a root bridge port for the spanning tree protocol.
mstpGroupTable	1.3.6.1.4.1.3181.10.6.2.42.3		not-accessible	This table defines MSTP parameter that my be different between instances. The mstp_id is referrenced from vlan.filter_config.mstp_group. Several VLAN may share the same MSTP group. If needed up to 63 table entires can be created.
mstpGroupEntry	1.3.6.1.4.1.3181.10.6.2.42.3.1		not-accessible
INT mstpGroupIndex	1.3.6.1.4.1.3181.10.6.2.42.3.1.1	INTEGER	not-accessible	Automatically generated
STR mstpGroupMstpId	1.3.6.1.4.1.3181.10.6.2.42.3.1.2	DisplayString	read-write	Defines filter table entry for this MSTP Group Id. This is the key value for the table. Type '=:' to edit, use index '[*] = new_id:' to add an entry. Edit string to nothing to delete entry.
I32 mstpGroupBridgePriority	1.3.6.1.4.1.3181.10.6.2.42.3.1.3	Integer32	read-write	The value of the writeable portion of the Bridge ID for this MSTP instance.
bridgeStatusTable	1.3.6.1.4.1.3181.10.6.2.42.100		not-accessible	This status table collects all bridge related status fields.
bridgeStatusEntry	1.3.6.1.4.1.3181.10.6.2.42.100.1		not-accessible
INT bridgeStatusIndex	1.3.6.1.4.1.3181.10.6.2.42.100.1.1	INTEGER	not-accessible	Automatically generated
I32 bridgeStatusStpProtocol	1.3.6.1.4.1.3181.10.6.2.42.100.1.2	Integer32	read-only	Stp protocol specification = 3 for 802.1D.
I32 bridgeStatusHelloTime	1.3.6.1.4.1.3181.10.6.2.42.100.1.3	Integer32	read-only	The amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree, or trying to become so, in seconds. This is the actual value that this bridge is currently using.
I32 bridgeStatusMaxAge	1.3.6.1.4.1.3181.10.6.2.42.100.1.4	Integer32	read-only	The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in seconds. This is the actual value that this bridge is currently using.
I32 bridgeStatusHoldTime	1.3.6.1.4.1.3181.10.6.2.42.100.1.5	Integer32	read-only	This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in seconds.
I32 bridgeStatusForwardDelay	1.3.6.1.4.1.3181.10.6.2.42.100.1.6	Integer32	read-only	This time controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in each of the Listening and Learning states, which precede the Forwarding state.
I32 bridgeStatusRootPort	1.3.6.1.4.1.3181.10.6.2.42.100.1.7	Integer32	read-only	The port number of the port that offers the lowest cost path from this bridge to the root bridge.
U32 bridgeStatusRootCost	1.3.6.1.4.1.3181.10.6.2.42.100.1.8	Unsigned32	read-only	The cost of the path to the root as seen from this bridge.
I32 bridgeStatusTopologyChanges	1.3.6.1.4.1.3181.10.6.2.42.100.1.9	Integer32	read-only	The total number of topology changes detected by this bridge since the management entity was last reset or initialized.
C32 bridgeStatusLastTopologyChange	1.3.6.1.4.1.3181.10.6.2.42.100.1.10	Counter32	read-only	The time in seconds when the last time a topology change was detected.
STR bridgeStatusMstpRegionName	1.3.6.1.4.1.3181.10.6.2.42.100.1.11	DisplayString	read-only	This the region name actually used.
I32 bridgeStatusMstiRevisionLevel	1.3.6.1.4.1.3181.10.6.2.42.100.1.12	Integer32	read-only	This the revision level actually used.
U32 bridgeStatusCistInternalRootPathCost	1.3.6.1.4.1.3181.10.6.2.42.100.1.13	Unsigned32	read-only
STR bridgeStatusCistRegionalRootId	1.3.6.1.4.1.3181.10.6.2.42.100.1.14	DisplayString	read-only	The Bridge Identifier of the current CIST Regional Root
U32 bridgeStatusCistRegionalRootPriority	1.3.6.1.4.1.3181.10.6.2.42.100.1.15	Unsigned32	read-only	The Bridge priority of the current CIST Regional Root
MAC bridgeStatusCistRegionalRootMac	1.3.6.1.4.1.3181.10.6.2.42.100.1.16	MacAddress	read-only	The Bridge MAC of the current CIST Regional Root
I32 bridgeStatusMaxHops	1.3.6.1.4.1.3181.10.6.2.42.100.1.17	Integer32	read-only
U32 bridgeStatusMstpStpAgingTime	1.3.6.1.4.1.3181.10.6.2.42.100.1.18	Unsigned32	read-only	Aging time of the bridge
portStatusTable	1.3.6.1.4.1.3181.10.6.2.42.101		not-accessible
portStatusEntry	1.3.6.1.4.1.3181.10.6.2.42.101.1		not-accessible
INT portStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.42.101.1.1	INTEGER	not-accessible	Automatically generated
I32 portStatusPort	1.3.6.1.4.1.3181.10.6.2.42.101.1.2	Integer32	read-only	The port for which these spanning tree information apply.
INT portStatusState	1.3.6.1.4.1.3181.10.6.2.42.101.1.3	INTEGER	read-only	This state controls what action a port takes on reception of a frame.
U32 portStatusLocalPortCost	1.3.6.1.4.1.3181.10.6.2.42.101.1.4	Unsigned32	read-only	The contribution of this port to the path cost of paths towards the spanning tree root which include this port. This is the actually used value.
STR portStatusDesignatedPortId	1.3.6.1.4.1.3181.10.6.2.42.101.1.5	DisplayString	read-only	The Port priority and identifier of the port on the Designated Bridge for this port's segment. Format: Priority:PortId.
U32 portStatusDesignatedPort	1.3.6.1.4.1.3181.10.6.2.42.101.1.6	Unsigned32	read-only	The Port Identifier of the port on the Designated Bridge for this port's segment.
U32 portStatusDesignatedPortPriority	1.3.6.1.4.1.3181.10.6.2.42.101.1.7	Unsigned32	read-only	The priority of the port on the Designated Bridge for this port's segment.
U32 portStatusDesignatedCost	1.3.6.1.4.1.3181.10.6.2.42.101.1.8	Unsigned32	read-only	The path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
STR portStatusDesignatedRootId	1.3.6.1.4.1.3181.10.6.2.42.101.1.9	DisplayString	read-only	The priority of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is connected. This is a 4-bit value included along with 12-bit of designated_root_mac as Root Bridge Identifier.
MAC portStatusDesignatedRootMac	1.3.6.1.4.1.3181.10.6.2.42.101.1.10	MacAddress	read-only	This contains just the MAC part of the bridge id.
I32 portStatusDesignatedRootPriority	1.3.6.1.4.1.3181.10.6.2.42.101.1.11	Integer32	read-only	This contains just the priorty part of the bridge id.
STR portStatusDesignatedBridgeId	1.3.6.1.4.1.3181.10.6.2.42.101.1.12	DisplayString	read-only	The priority of the Bridge that this port considers to be the Designated Bridge for this port segment.This is a 4-bit value included along with 12-bit of designated_bridge_mac as Bridge Identifier.
MAC portStatusDesignatedBridgeMac	1.3.6.1.4.1.3181.10.6.2.42.101.1.13	MacAddress	read-only	The Bridge Identifier of the bridge that this port considers to be the Designated Bridge for this port's segment.
I32 portStatusDesignatedBridgePriority	1.3.6.1.4.1.3181.10.6.2.42.101.1.14	Integer32	read-only	This contains just the priorty part of the bridge id.
U32 portStatusForwardTransition	1.3.6.1.4.1.3181.10.6.2.42.101.1.15	Unsigned32	read-only	The number of times this port has transitioned from the Learning state to the Forwarding state.
INT portStatusOperEdgePort	1.3.6.1.4.1.3181.10.6.2.42.101.1.16	INTEGER	read-only	A value of true indicates that this port should be assumed as an edge-port.
INT portStatusOperP2pPort	1.3.6.1.4.1.3181.10.6.2.42.101.1.17	INTEGER	read-only	The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection.
INT portStatusRole	1.3.6.1.4.1.3181.10.6.2.42.101.1.18	INTEGER	read-only	Assigned port role
INT portStatusInconsistentBridge	1.3.6.1.4.1.3181.10.6.2.42.101.1.19	INTEGER	read-only	A value of true indicates that the port is inconsistent due to Bridge assurance.
mstpStatusTableTable	1.3.6.1.4.1.3181.10.6.2.42.102		not-accessible	This table contains a record for each MSTP instance and for each port thereof. Table ends with first record with mstp_id=0.
mstpStatusTableEntry	1.3.6.1.4.1.3181.10.6.2.42.102.1		not-accessible
INT mstpStatusTableIndex	1.3.6.1.4.1.3181.10.6.2.42.102.1.1	INTEGER	not-accessible	Automatically generated
I32 mstpStatusTableMstpId	1.3.6.1.4.1.3181.10.6.2.42.102.1.2	Integer32	read-only	MSTP instance this entry
I32 mstpStatusTablePort	1.3.6.1.4.1.3181.10.6.2.42.102.1.3	Integer32	read-only	Port id of the port in relation to above MSTP instance.
INT mstpStatusTableState	1.3.6.1.4.1.3181.10.6.2.42.102.1.4	INTEGER	read-only	This state controls what action a port takes on reception of a frame.
I32 mstpStatusTablePortPriority	1.3.6.1.4.1.3181.10.6.2.42.102.1.5	Integer32	read-only
U32 mstpStatusTableInternalAdminPathCost	1.3.6.1.4.1.3181.10.6.2.42.102.1.6	Unsigned32	read-only
U32 mstpStatusTableForwardTransition	1.3.6.1.4.1.3181.10.6.2.42.102.1.7	Unsigned32	read-only	The number of times this port has transitioned from the Learning state to the Forwarding state.
INT mstpStatusTableRole	1.3.6.1.4.1.3181.10.6.2.42.102.1.8	INTEGER	read-only	Assigned port role
mstpBridgeStatusTable	1.3.6.1.4.1.3181.10.6.2.42.103		not-accessible	This status table collects all multiple spanning tree bridge related status fields.
mstpBridgeStatusEntry	1.3.6.1.4.1.3181.10.6.2.42.103.1		not-accessible
INT mstpBridgeStatusIndex	1.3.6.1.4.1.3181.10.6.2.42.103.1.1	INTEGER	not-accessible	Automatically generated
I32 mstpBridgeStatusMstpId	1.3.6.1.4.1.3181.10.6.2.42.103.1.2	Integer32	read-only	MSTP instance identifier.
U32 mstpBridgeStatusBridgePriority	1.3.6.1.4.1.3181.10.6.2.42.103.1.3	Unsigned32	read-only	Bridge priority.
I32 mstpBridgeStatusRootPort	1.3.6.1.4.1.3181.10.6.2.42.103.1.4	Integer32	read-only	The port number of the port that offers the lowest cost path from this bridge to the root bridge.
U32 mstpBridgeStatusRootCost	1.3.6.1.4.1.3181.10.6.2.42.103.1.5	Unsigned32	read-only	The cost of the path to the root as seen from this bridge.
I32 mstpBridgeStatusMaxHops	1.3.6.1.4.1.3181.10.6.2.42.103.1.6	Integer32	read-only
STR mstpBridgeStatusRegionalRootId	1.3.6.1.4.1.3181.10.6.2.42.103.1.7	DisplayString	read-only	The priority of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the port is connected. This is a 4-bit value included along with 12-bit of designated_root_mac as Root Bridge Identifier.
U32 mstpBridgeStatusRegionalRootPriority	1.3.6.1.4.1.3181.10.6.2.42.103.1.8	Unsigned32	read-only	This contains just the MAC part of the bridge id.
MAC mstpBridgeStatusRegionalRootMac	1.3.6.1.4.1.3181.10.6.2.42.103.1.9	MacAddress	read-only	This contains just the priorty part of the bridge id.
I32 mstpBridgeStatusTopologyChanges	1.3.6.1.4.1.3181.10.6.2.42.103.1.10	Integer32	read-only	The total number of topology changes detected by this mstp bridge instance since the management entity was last reset or initialized.
C32 mstpBridgeStatusLastTopologyChange	1.3.6.1.4.1.3181.10.6.2.42.103.1.11	Counter32	read-only	The time in seconds when the last time a topology change was detected.

RFC description

Spanning Tree Protocol (STP) and bridge configuration MIB for Microsens Generation 6 switches.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (Spanning Tree Protocol/RSTP/MSTP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-STP-MIB

What Is G6-STP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description