| OID symbolic | OID numeric | Type | Access | Description |
|---|
| rlSNMP | 1.3.6.1.4.1.171.10.94.89.89.98 | | | Private MIB module for SNMP support in DLINK-3100 devices. |
| rlSNMPv3 | 1.3.6.1.4.1.171.10.94.89.89.98.1 | | | |
| INT rlTargetParamsTestingLevel | 1.3.6.1.4.1.171.10.94.89.89.98.1.1 | INTEGER | read-write | The level of the tests done when configuring an entry in the snmpTargetParamsTable. |
| INT rlNotifyFilterTestingLevel | 1.3.6.1.4.1.171.10.94.89.89.98.1.2 | INTEGER | read-write | The level of the tests done when configuring an entry in the snmpNotifyFilterTable. |
| OCT rlSnmpEngineID | 1.3.6.1.4.1.171.10.94.89.89.98.1.3 | OCTET STRING | read-write | A variable for setting the router's local engineID value.
Setting this variable will effect the value of snmpEngineID. Setting this
variable to the value '00 00 00 00 00'H will cause snmpEngineID to get
an automatically created value based on the device basic MAC address.
This method of setting the agent's engineID is recommended for stand-alone
systems. Setting this variable to any other (valid) value will set snmpEngineID
to this value. Setting this variable to all 'ff'H or all zeros is not
allowed, with the exception of the value '00 00 00 00 00'H.
The last method is recommended for stackable system, in order for the
engineID to be unique within an administrative domain.
Setting this value (to a value different then the default value)
is required before configuring users data in usmUserTable and
vacmSecurityToGroupTable.
Changing the value of this variable has 2 side-effects:
- All user data will be deleted, including: all usmUserTable configured entries and
vacmSecurityToGroupTable entries where vacmSecurityModel = 3.
- All snmpCommunityTable entries with snmpCommunityContextEngineID value
equal to old rlSnmpEngineID value, will be updated with the new
rlSnmpEngineID value. |
| rlSNMPv3IpAddrToIndexTable | 1.3.6.1.4.1.171.10.94.89.89.98.1.4 | | not-accessible | This table maps ip addresses to indices. The output index
is used as a component in some SNMPv3 tables fields (for example:
snmpTargetAddrName). Ipv4 addresses are not supported by this table.
Note: in getNext operations on this table, only mappings which are in use
in snmpTargetAddrTable (using rlTargetAddrMagicUsedInIndex) will be retreived.
The mapped index does not include delimiters which are forbidden
in SNMPv3 tag values (and thus can be used in tag fields). |
| rlSNMPv3IpAddrToIndexEntry | 1.3.6.1.4.1.171.10.94.89.89.98.1.4.1 | | not-accessible | The row definition for this table. |
| IPt rlSNMPv3IpAddrToIndexAddrType | 1.3.6.1.4.1.171.10.94.89.89.98.1.4.1.1 | InetAddressType | not-accessible | Type of NMS IP address. |
| IP rlSNMPv3IpAddrToIndexAddr | 1.3.6.1.4.1.171.10.94.89.89.98.1.4.1.2 | InetAddress | not-accessible | NMS IP address. |
| OCT rlSNMPv3IpAddrToIndexMappedIndex | 1.3.6.1.4.1.171.10.94.89.89.98.1.4.1.3 | OCTET STRING | read-only | The index mapped for this row ip address. |
| rlTargetAddrExtTable | 1.3.6.1.4.1.171.10.94.89.89.98.1.5 | | not-accessible | This table extends rlTargetAddrExtEntry. |
| rlTargetAddrExtEntry | 1.3.6.1.4.1.171.10.94.89.89.98.1.5.1 | | not-accessible | The row definition for this table. |
| OCT rlTargetAddrMagicUsedInIndex | 1.3.6.1.4.1.171.10.94.89.89.98.1.5.1.1 | OCTET STRING | read-create | Setting this field to a 4 octets length value means that ip mapping (using rlSNMPv3IpAddrToIndexTable)
is used for this row. If such a mapping is not used, a 0-length octet string
value should be used for this field (this is also the default).
This field value is determined only once, upon creation of an entry in the
snmpTargetAddrTable. A change in its value while updating an existing entry
is ignored.
Prior to creating a snmpTargetAddrTable entry with a 4 octets length value for
this field, the rlSNMPv3IpAddrToIndexTable must be used in order to retrieve
this value. |
| rlSNMPDomains | 1.3.6.1.4.1.171.10.94.89.89.98.2 | | | |
| rlSnmpUDPMridDomain | 1.3.6.1.4.1.171.10.94.89.89.98.2.1 | | | The SNMPv2 over UDP transport domain, used when Multi-Instance Router
is supported (more than one MIR instance exist).
The corresponding transport address is of type RlSnmpUDPMridAddress. |
| rlSnmpUdpIpv6MridDomain | 1.3.6.1.4.1.171.10.94.89.89.98.2.2 | | | The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
is supported (more than one MIR instance exist).
The corresponding transport address is of type RlSnmpUDPIpv6MridAddress
for global IPv6 addresses. |
| rlSnmpUdpIpv6zMridDomain | 1.3.6.1.4.1.171.10.94.89.89.98.2.3 | | | The SNMPv2 over UDP over IPv6 transport domain, used when Multi-Instance Router
is supported (more than one MIR instance exist).
The corresponding transport address is of type RlSnmpUDPIpv6zMridAddress
for scoped IPv6 addresses with a zone index. |
| rlSnmpRequestMridTable | 1.3.6.1.4.1.171.10.94.89.89.98.3 | | not-accessible | A table for determining the Mrid for the current SNMP request. |
| rlSnmpRequestMridEntry | 1.3.6.1.4.1.171.10.94.89.89.98.3.1 | | not-accessible | The row definition for this table. |
| INT rlSnmpRequestManagedMrid | 1.3.6.1.4.1.171.10.94.89.89.98.3.1.1 | INTEGER | read-only | The router instance the NMS wants to manage in the current SNMP request.
The value of this object, when attaching a variable instance of the
rlSnmpRequestManagedMridTable to an SNMP request, will determine the
managed Mrid for this request.
It is important to mention that the variable insance must be attached
as the first variable in the PDU in order to influence all variables. |
| INT rlSnmpRequestMridStatus | 1.3.6.1.4.1.171.10.94.89.89.98.3.1.2 | INTEGER | read-write | The status of this entry. |
| INT rlSNMPenable | 1.3.6.1.4.1.171.10.94.89.89.98.4 | INTEGER | read-write | Enables or disables SNMP. |
| rlMridInetTable | 1.3.6.1.4.1.171.10.94.89.89.98.6 | | not-accessible | The MRID related configurations table of the agent |
| rlMridInetEntry | 1.3.6.1.4.1.171.10.94.89.89.98.6.1 | | not-accessible | The row definition for this table. |
| INT rlMridInetConnection | 1.3.6.1.4.1.171.10.94.89.89.98.6.1.1 | INTEGER | read-write | The router instance connecting the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry. |
| INT rlInetManagedMrid | 1.3.6.1.4.1.171.10.94.89.89.98.6.1.2 | INTEGER | read-write | The router instance currently managed by the NMS who accessed the agent
through the community table entry corresponding to the keys of this entry |
| rlEvents | 1.3.6.1.4.1.171.10.94.89.89.98.7 | | | |
| INT rlEventsPollerId | 1.3.6.1.4.1.171.10.94.89.89.98.7.1 | INTEGER | read-only | The rlEventsPollerId is the 1st key in all the rlEvents tables. Each poller must first GET from this
object his Id. The agent will ensure uniqueness. |
| TIK rlEventsDefaultPollingInterval | 1.3.6.1.4.1.171.10.94.89.89.98.7.2 | TimeTicks | read-write | The default polling time. Will be used to detrermined whether the events configured by a poller in
rlEventsTable can be destroyed, in absence of an entry for this poller in the rlEventsPollingControlTable. |
| INT rlEventsDeleteEvents | 1.3.6.1.4.1.171.10.94.89.89.98.7.3 | INTEGER | read-write | SETting a id of an active poller will cause all the rows of this poller in the rlEventsTable
to be destroyed. This is equivalent to SETting rlEventsStatus of each row of this poller to 'destroy'.
GET operation on this variable is meaningless, and the value 0 will be returned in this case (actual
pollers start from 1). |
| rlEventsMaskTable | 1.3.6.1.4.1.171.10.94.89.89.98.7.4 | | not-accessible | The table showing the events mask for each client. |
| rlEventsMaskEntry | 1.3.6.1.4.1.171.10.94.89.89.98.7.4.1 | | not-accessible | The row definition for this table. |
| INT rlEventsMaskPollerId | 1.3.6.1.4.1.171.10.94.89.89.98.7.4.1.1 | INTEGER | not-accessible | The poller id whose events are shown in this table |
| OCT rlEventsMaskMask | 1.3.6.1.4.1.171.10.94.89.89.98.7.4.1.2 | OCTET STRING | read-only | The semantics of the rlEventsMask is an array of timestamps (each 4 octets
containing one time stamp). Each timestamp is in TimeTicks units encoded in network order.
Thus the mask can contain up to 40 timestamps. If a place in the array is empty it will contain
0.
Each timestamp shows the time of the last occurrence of the event whose
rlEventIndexKey in the rlEventsTable for this client id is the same as its index in the array.
Each for bytes of the rlEventsMask will contain the timestamp in TimeTicks
units encoded in network order of the last time the event |
| rlEventsTable | 1.3.6.1.4.1.171.10.94.89.89.98.7.5 | | not-accessible | The table relating the events recorded to the indices in the rlEventsMask. |
| rlEventsEntry | 1.3.6.1.4.1.171.10.94.89.89.98.7.5.1 | | not-accessible | The row definition for this table. |
| INT rlEventsPoller | 1.3.6.1.4.1.171.10.94.89.89.98.7.5.1.1 | INTEGER | not-accessible | The poller id whose event definitions are shown in this table. |
| OID rlEventId | 1.3.6.1.4.1.171.10.94.89.89.98.7.5.1.2 | OBJECT IDENTIFIER | not-accessible | The event id of the polled event. This is the notification object identifier (in case of a
SNMPV2 notification) or the translation to SNMPv2 notation of an SNMPv1 trap according to the RFC 3584
(SNMP versions coexistence). |
| INT rlEventIndexInMask | 1.3.6.1.4.1.171.10.94.89.89.98.7.5.1.3 | INTEGER | read-only | Index in the rlEventsMaskMask of this poller id that has been allocated for this event by the device. |
| ROW rlEventsStatus | 1.3.6.1.4.1.171.10.94.89.89.98.7.5.1.4 | RowStatus | read-create | RowStatus for this table. Note that the device may refuse for resource shortage reasons to honour a create request
for this poller even if apparently there still is room in his rlEventsMaskMask (i.e. the poller has requested
monitoring of less than 40 events). |
| rlEventsPollingControlTable | 1.3.6.1.4.1.171.10.94.89.89.98.7.6 | | not-accessible | The polling control table for a poller. Currently contain only the polling interval. |
| rlEventsPollingControlEntry | 1.3.6.1.4.1.171.10.94.89.89.98.7.6.1 | | not-accessible | The row definition for this table. |
| INT rlEventsPollingControlPollerId | 1.3.6.1.4.1.171.10.94.89.89.98.7.6.1.1 | INTEGER | not-accessible | The poller id whose polling controls are shown in this table. |
| TIK rlEventsPollingControlPollingInterval | 1.3.6.1.4.1.171.10.94.89.89.98.7.6.1.2 | TimeTicks | read-create | The desired polling interval for this poller. If the device has determined that the poller has not
polled the device for 3 times this polling interval it may destroy all the data related to this poller
in the rlevents database |
