G6-LACP-MIB

All MIBs › G6-LACP-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Technology: Link Aggregation, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for Link Aggregation Control Protocol configuration and port channel status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-LACP-MIB?

G6-LACP-MIB is a vendor-specific MIB from MICROSENS GmbH & Co. KG for its Generation 6 (G6) Ethernet switch family, managing Link Aggregation Control Protocol configuration as the hint describes. It exposes global enable via lacpEnableLacp, general aggregation settings through configTable (configLinkAggregation static/dynamic, configSystemPriority, configMode active/passive, configTransmitInterval slow/fast), per-port assignment via portConfigTable (portConfigTrunkId mapping a port to a trunk), and per-trunk settings via trunkConfigTable (trunkConfigName, trunkConfigTrunkEnable). It depends on the MICROSENS-G6-MIB enterprise tree for its OID root and on standard SNMPv2-SMI/TC types rather than any LACP-specific textual conventions of its own. It is deployed on MICROSENS G6 managed Ethernet switches used in industrial and building/campus networking to configure and verify link-aggregation (port-channel) behavior, and administrators can download the G6-LACP-MIB file to load it into their MIB browser when auditing trunk configuration across a switch estate.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-LACP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS Generation 6 (G6) managed Ethernet switches

Monitoring Examples

An operator polls trunkConfigTable to confirm trunkConfigTrunkEnable is set for an expected link-aggregation group and cross-checks portConfigTable's portConfigTrunkId values to verify all intended member ports are assigned to that trunk; a port unexpectedly showing trunkConfigTrunkId 0 would indicate it has fallen out of the aggregation and is running as a standalone link.

What Can Be Monitored

LACP global enable state
link-aggregation mode (static/dynamic) and system priority
active/passive LACP mode and PDU transmit interval
per-port trunk assignment
per-trunk name and enable status

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
protocol	1.3.6.1.4.1.3181.10.6.2			Microsens private MIB for Generation 6 Ethernet Switches
lacp	1.3.6.1.4.1.3181.10.6.2.54
INT lacpEnableLacp	1.3.6.1.4.1.3181.10.6.2.54.1	INTEGER	read-write	General enable of LACP function.
configTable	1.3.6.1.4.1.3181.10.6.2.54.2		not-accessible
configEntry	1.3.6.1.4.1.3181.10.6.2.54.2.1		not-accessible
INT configIndex	1.3.6.1.4.1.3181.10.6.2.54.2.1.1	INTEGER	not-accessible	Automatically generated
INT configLinkAggregation	1.3.6.1.4.1.3181.10.6.2.54.2.1.2	INTEGER	read-write	With static setting the link aggregation operates exactly on the ports defined via trunk configuration. Dynamic uses protocol between both endpoints to dynamically use as many or little links as currently available.
I32 configSystemPriority	1.3.6.1.4.1.3181.10.6.2.54.2.1.3	Integer32	read-write	Priority associated with the system.
INT configMode	1.3.6.1.4.1.3181.10.6.2.54.2.1.4	INTEGER	read-write	Determines active or passive operational mode.
INT configTransmitInterval	1.3.6.1.4.1.3181.10.6.2.54.2.1.5	INTEGER	read-write	Determine LACP PDU interval.
portConfigTable	1.3.6.1.4.1.3181.10.6.2.54.3		not-accessible	Configuration parameter concerning the port specific LACP setttings
portConfigEntry	1.3.6.1.4.1.3181.10.6.2.54.3.1		not-accessible
INT portConfigPortIndex	1.3.6.1.4.1.3181.10.6.2.54.3.1.1	INTEGER	not-accessible	Automatically generated
I32 portConfigTrunkId	1.3.6.1.4.1.3181.10.6.2.54.3.1.2	Integer32	read-write	All ports with the same trunk_id form a common trunk. Use trunk_id 0 for ports that do not belong to any LACP trunk. The trunk_id corresponds to the trunk_config[index].
trunkConfigTable	1.3.6.1.4.1.3181.10.6.2.54.4		not-accessible	Each trunk is referenced by its index number.
trunkConfigEntry	1.3.6.1.4.1.3181.10.6.2.54.4.1		not-accessible
INT trunkConfigIndex	1.3.6.1.4.1.3181.10.6.2.54.4.1.1	INTEGER	not-accessible	Automatically generated
STR trunkConfigName	1.3.6.1.4.1.3181.10.6.2.54.4.1.2	DisplayString	read-write	Unique name used to identify the trunk Interface.
INT trunkConfigTrunkEnable	1.3.6.1.4.1.3181.10.6.2.54.4.1.3	INTEGER	read-write	Enables the trunk for operation. When disabled, trunk is brought down.
portStatusTable	1.3.6.1.4.1.3181.10.6.2.54.100		not-accessible	Displays the negotiated and active settings of LACP parameters.
portStatusEntry	1.3.6.1.4.1.3181.10.6.2.54.100.1		not-accessible
INT portStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.54.100.1.1	INTEGER	not-accessible	Automatically generated
STR portStatusTrunkName	1.3.6.1.4.1.3181.10.6.2.54.100.1.2	DisplayString	read-only	Name of the trunk to which port is associated.
I32 portStatusTrunkId	1.3.6.1.4.1.3181.10.6.2.54.100.1.3	Integer32	read-only	interface index value of the trunk to which port is attached.
INT portStatusActivityMode	1.3.6.1.4.1.3181.10.6.2.54.100.1.4	INTEGER	read-only
INT portStatusSynchronized	1.3.6.1.4.1.3181.10.6.2.54.100.1.5	INTEGER	read-only	True when trunk is synchronized.
INT portStatusAggregationPossible	1.3.6.1.4.1.3181.10.6.2.54.100.1.6	INTEGER	read-only	Indicates link is aggregatable or not.
INT portStatusCollection	1.3.6.1.4.1.3181.10.6.2.54.100.1.7	INTEGER	read-only	Collection of incoming frames on this link is enabled or disabled.
INT portStatusDistribution	1.3.6.1.4.1.3181.10.6.2.54.100.1.8	INTEGER	read-only	Distribution of outgoing frames on this link is enabled or disabled.
INT portStatusExpiredState	1.3.6.1.4.1.3181.10.6.2.54.100.1.9	INTEGER	read-only	True indicates that the actor is in the EXPIRED state
INT portStatusDefaultedState	1.3.6.1.4.1.3181.10.6.2.54.100.1.10	INTEGER	read-only	When true default configured operational partner information are used. If false the partner information in use has been received in a LACP PDU.
actorStatusTable	1.3.6.1.4.1.3181.10.6.2.54.101		not-accessible	Actor specific status values.
actorStatusEntry	1.3.6.1.4.1.3181.10.6.2.54.101.1		not-accessible
INT actorStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.54.101.1.1	INTEGER	not-accessible	Automatically generated
I32 actorStatusSystemPriority	1.3.6.1.4.1.3181.10.6.2.54.101.1.2	Integer32	read-only	Priority associated with the system
MAC actorStatusSystemId	1.3.6.1.4.1.3181.10.6.2.54.101.1.3	MacAddress	read-only	Mac address of the switch
I32 actorStatusPort	1.3.6.1.4.1.3181.10.6.2.54.101.1.4	Integer32	read-only	Port number assigned by lacp which is local to LACP.
I32 actorStatusPriority	1.3.6.1.4.1.3181.10.6.2.54.101.1.5	Integer32	read-only	Priority assigned to the port.
I32 actorStatusAdminKey	1.3.6.1.4.1.3181.10.6.2.54.101.1.6	Integer32	read-only	current administration key value of the port.
I32 actorStatusOperKey	1.3.6.1.4.1.3181.10.6.2.54.101.1.7	Integer32	read-only	current operational key value of the port.
INT actorStatusTransmitInterval	1.3.6.1.4.1.3181.10.6.2.54.101.1.8	INTEGER	read-only	Indicates the link partners transmit interval.
partnerStatusTable	1.3.6.1.4.1.3181.10.6.2.54.102		not-accessible	Partner specific status values.
partnerStatusEntry	1.3.6.1.4.1.3181.10.6.2.54.102.1		not-accessible
INT partnerStatusPortIndex	1.3.6.1.4.1.3181.10.6.2.54.102.1.1	INTEGER	not-accessible	Automatically generated
I32 partnerStatusSystemPriority	1.3.6.1.4.1.3181.10.6.2.54.102.1.2	Integer32	read-only	Priority associated with the system
MAC partnerStatusSystemId	1.3.6.1.4.1.3181.10.6.2.54.102.1.3	MacAddress	read-only	Mac address of the switch
I32 partnerStatusPort	1.3.6.1.4.1.3181.10.6.2.54.102.1.4	Integer32	read-only	Port number assigned by lacp which is local to LACP.
I32 partnerStatusPriority	1.3.6.1.4.1.3181.10.6.2.54.102.1.5	Integer32	read-only	Priority assigned to the port.
I32 partnerStatusAdminKey	1.3.6.1.4.1.3181.10.6.2.54.102.1.6	Integer32	read-only	current administration key value of the port.
I32 partnerStatusOperKey	1.3.6.1.4.1.3181.10.6.2.54.102.1.7	Integer32	read-only	current operational key value of the port.
INT partnerStatusReceiveInterval	1.3.6.1.4.1.3181.10.6.2.54.102.1.8	INTEGER	read-only	Partner requesting transmission interval from actor. TRUE send PDUs for every 1 sec, FALSE every 30 secs.
INT partnerStatusActivityMode	1.3.6.1.4.1.3181.10.6.2.54.102.1.9	INTEGER	read-only
INT partnerStatusSynchronized	1.3.6.1.4.1.3181.10.6.2.54.102.1.10	INTEGER	read-only	True when trunk is synchronized.
INT partnerStatusAggregationPossible	1.3.6.1.4.1.3181.10.6.2.54.102.1.11	INTEGER	read-only	Indicates link is aggregatable or not.
INT partnerStatusCollection	1.3.6.1.4.1.3181.10.6.2.54.102.1.12	INTEGER	read-only	Collection of incoming frames on this link is enabled or disabled.
INT partnerStatusDistribution	1.3.6.1.4.1.3181.10.6.2.54.102.1.13	INTEGER	read-only	Distribution of outgoing frames on this link is enabled or disabled.
INT partnerStatusExpiredState	1.3.6.1.4.1.3181.10.6.2.54.102.1.14	INTEGER	read-only	True indicates that the actor is in the EXPIRED state
INT partnerStatusDefaultedState	1.3.6.1.4.1.3181.10.6.2.54.102.1.15	INTEGER	read-only	When true default configured operational partner information are used. If false the partner information in use has been received in a LACP PDU.

RFC description

Microsens Generation 6 Ethernet switch LACP (Link Aggregation Control Protocol) configuration and monitoring MIB.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (Link Aggregation Control Protocol) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-LACP-MIB

What Is G6-LACP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description