G6-POE-MIB

All MIBs › G6-POE-MIB

Organization: MICROSENS GmbH & Co. KG

Last Updated: 2018-02-12

Category: Technology: PoE, Vendor: MICROSENS

Description: MICROSENS G6 switch MIB for Power over Ethernet port power budget, priority, and status management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is G6-POE-MIB?

G6-POE-MIB is a private enterprise MIB from MICROSENS for its Generation 6 (G6) family of managed Ethernet switches, focused on Power over Ethernet (PoE) port management. It exposes configuration data such as per-port PoE priority and PoE+ enable state (configTable/configEntry with configPriorityPort, configEnablePoePlus), alongside operational data like per-port power status and overall power budget in statusTable and poeTotalPowerConsumed/poePoeMaxPowerAvailable. It is squarely aimed at monitoring the hardware health and capacity of the switch's PoE subsystem - tracking overall power budget consumption against the chassis maximum, per-port power draw and delivery status, and providing remote PoE port restart (poeRestartPoePort) for fault recovery. It builds on the standard IEEE 802.3af/at PoE model and typically sits alongside standard IF-MIB interface objects for the same ports. This MIB is deployed in enterprise LAN environments using MICROSENS G6 switches to power VoIP phones, wireless APs, and IP cameras, where administrators need visibility into available versus consumed PoE power. Engineers can download the G6-POE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in G6-POE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

MICROSENS G6 managed Ethernet switches

Monitoring Examples

An admin would poll poeTotalPowerConsumed against poePoeMaxPowerAvailable to detect when the switch is approaching its PoE power budget ceiling before adding more powered devices. Walking statusTable (statusPortIndex) reveals per-port PoE delivery state, while configTable's configPriorityPort shows which ports are configured as high priority so they retain power during a budget shortfall. If a port stops delivering power unexpectedly, poeRestartPoePort can be invoked to power-cycle it without touching link configuration.

What Can Be Monitored

total PoE power consumed
maximum available PoE power budget
per-port PoE priority
PoE+ enable status per port
per-port PoE operational status

Imported Objects

From MICROSENS-G6-MIB

g6	OBJECT-IDENTITY

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32
enterprises

From SNMPv2-TC

DisplayString
MacAddress

OIDs

OID symbolic	OID numeric	Type	Access	Description
device	1.3.6.1.4.1.3181.10.6.1			Microsens private MIB for Generation 6 Ethernet Switches
poe	1.3.6.1.4.1.3181.10.6.1.33
I32 poePoeMaxPowerAvailable	1.3.6.1.4.1.3181.10.6.1.33.1	Integer32	read-write	Defines the total power that this units power supply can support. This value is used to balance the PoE output power delivered. Please adjust according to connected power supply rating.
STR poeRestartPoePort	1.3.6.1.4.1.3181.10.6.1.33.2	DisplayString	read-write	This function may be used to briefly drop the power on a PoE port in order to reboot the attached device. Please supply port number as parameter. The shorthand port format like 1 for 1/1 may be used. Syntax examples: poe.restart_poe_port = 1/2,1/5 or poe.restart_poe_port = 1-3 or equivalent poe.restart_poe_port = 1/1-1/3.
configTable	1.3.6.1.4.1.3181.10.6.1.33.3		not-accessible	Power over Ethernet function permits the powering of connected units which do not use their own local power supply.
configEntry	1.3.6.1.4.1.3181.10.6.1.33.3.1		not-accessible
INT configPortIndex	1.3.6.1.4.1.3181.10.6.1.33.3.1.1	INTEGER	not-accessible	Automatically generated
INT configMode	1.3.6.1.4.1.3181.10.6.1.33.3.1.2	INTEGER	read-write	Used to enable or disable PoE function.
INT configPriorityPort	1.3.6.1.4.1.3181.10.6.1.33.3.1.3	INTEGER	read-write	Ports without priority may be switched off under a power contention situation.
INT configEnablePoePlus	1.3.6.1.4.1.3181.10.6.1.33.3.1.4	INTEGER	read-write	Allow between 15-30W power consumption.
U32 poeTotalPowerConsumed	1.3.6.1.4.1.3181.10.6.1.33.100	Unsigned32	read-only	The sum of power currently delivered to all ports. (units: mW)
statusTable	1.3.6.1.4.1.3181.10.6.1.33.101		not-accessible	This table list the current PoE port conditions.
statusEntry	1.3.6.1.4.1.3181.10.6.1.33.101.1		not-accessible
INT statusPortIndex	1.3.6.1.4.1.3181.10.6.1.33.101.1.1	INTEGER	not-accessible	Automatically generated
INT statusCondition	1.3.6.1.4.1.3181.10.6.1.33.101.1.2	INTEGER	read-only	PoE status and conditions.
INT statusDeterminedClass	1.3.6.1.4.1.3181.10.6.1.33.101.1.3	INTEGER	read-only	Determined and negotiated PoE class.
I32 statusOutputCurrent	1.3.6.1.4.1.3181.10.6.1.33.101.1.4	Integer32	read-only	Current delivered to the attached device. (units: mA)
I32 statusOutputVoltage	1.3.6.1.4.1.3181.10.6.1.33.101.1.5	Integer32	read-only	Voltage deliverd to the attached device. (units: mV)
I32 statusOutputPower	1.3.6.1.4.1.3181.10.6.1.33.101.1.6	Integer32	read-only	Calculated power delivered to the attached device. (units: mW)
U32 statusPowerDeniedCounter	1.3.6.1.4.1.3181.10.6.1.33.101.1.7	Unsigned32	read-only	Incremented whenever a PoE request was denied regardless of reason.
U32 statusOverCurrentCounter	1.3.6.1.4.1.3181.10.6.1.33.101.1.8	Unsigned32	read-only	Incremented whenever an over_current condition was detected.
U32 statusShortCircuitCounter	1.3.6.1.4.1.3181.10.6.1.33.101.1.9	Unsigned32	read-only	Incremented whenever a short circuit was detected.
energySuppliedTable	1.3.6.1.4.1.3181.10.6.1.33.102		not-accessible	This table list the power provided via PoE ports. The values are automatically updated in the given interval.
energySuppliedEntry	1.3.6.1.4.1.3181.10.6.1.33.102.1		not-accessible
INT energySuppliedPortIndex	1.3.6.1.4.1.3181.10.6.1.33.102.1.1	INTEGER	not-accessible	Automatically generated
U32 energySuppliedLast5Seconds	1.3.6.1.4.1.3181.10.6.1.33.102.1.2	Unsigned32	read-only	Energy supplied in the past 5 seconds. Value in joule.
U32 energySuppliedLast15Seconds	1.3.6.1.4.1.3181.10.6.1.33.102.1.3	Unsigned32	read-only	Energy supplied in the past 15 seconds. Value in joule.
U32 energySuppliedLastMinute	1.3.6.1.4.1.3181.10.6.1.33.102.1.4	Unsigned32	read-only	Energy supplied in the past 60 seconds. Value in joule.
U32 energySuppliedLast15Minutes	1.3.6.1.4.1.3181.10.6.1.33.102.1.5	Unsigned32	read-only	Energy supplied in the past 15 minutes. Value in joule.
U32 energySuppliedLastHour	1.3.6.1.4.1.3181.10.6.1.33.102.1.6	Unsigned32	read-only	Energy supplied in the past hour. Value in joule.
U32 energySuppliedLastDay	1.3.6.1.4.1.3181.10.6.1.33.102.1.7	Unsigned32	read-only	Energy supplied in the past day. Value in joule.

RFC description

Power over Ethernet (PoE) configuration and port management for Microsens switches.

Start monitoring MICROSENS Generation 6 (G6) managed Ethernet switch (Power over Ethernet) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download G6-POE-MIB

What Is G6-POE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description