FTS-CS800-MIB :: qInfoEnable

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › FTS-CS800-MIB › qInfoEnable

qInfoEnable

Module: FTS-CS800-MIB

OID (symbolic): FTS-CS800-MIB::qInfoEnable

OID (numeric): 1.3.6.1.4.1.231.2.70.2.1.3.1

Node type: OBJECT-TYPE

Type: TrapToggle

Access: read-write

Description: The variable defines whether detected information traps are sent. This type of trap will be sent to the defined management station(s) if the value of qInfoEnable is enabled(2).

What is qInfoEnable?

Turns informational-severity traps (qInfoTrap) on or off; set to enabled(2) if you want low-severity status notices forwarded to your management stations rather than just critical/warning events.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.231.2.70.2.1.3.1
snmpwalk -v2c -c public <target> FTS-CS800-MIB::qInfoEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.231.2.70.2.1.3.1.1
snmpget -v2c -c public <target> FTS-CS800-MIB::qInfoEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.231.2.70.2.1.3.1.1 s <value>

Start monitoring Fujitsu CS800 server/storage system with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the FTS-CS800-MIB::qInfoEnable OID value, configure state conditions and alerts, and monitor any Fujitsu CS800 server/storage system from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.231sniAN-MIB
1.3.6.1.4.1.231.2sniProductMibsApplication-Monitoring-MIB
Numeric OIDNameModule
1.3.6.1.4.1.231.2.70eternuscsFTS-CS800-MIB
1.3.6.1.4.1.231.2.70.2cs800FTS-CS800-MIB
1.3.6.1.4.1.231.2.70.2.1cs800snmpFTS-CS800-MIB
1.3.6.1.4.1.231.2.70.2.1.3qTrapEnableFTS-CS800-MIB
1.3.6.1.4.1.231.2.70.2.1.3.1qInfoEnableFTS-CS800-MIB