FTS-CS800-MIB DEFINITIONS ::= BEGIN
--
--
-- Last changed:  9-6-2005
--      MMH Added serial number to the system info group
-- Last changed:  9-20-2003
--       Author:  Pauline Boyd
-- Last changed:  3-23-2010
--       Author:  Dieter Kasper
-- Last changed:  6-08-2011
--       Author: Brian Raccuglia
-- Last changed:  6-17-2011
--       Author: Ursula Menke
-- Last changed:  2-08-2012
--       Author: Ursula Menke
-- Last changed:  2-27-2012
--       Author:  Toshio Ichimura
-- Last changed:  3-16-2012
--       Author: Ursula Menke
-- Last changed:  3-26-2012
--       Author: Lars Holowko (fix IMPORTS typo)
-- Last changed:  10-1-2012
--       Author: Christoph Knacke (added trap information to SUMMARY message)
--
--  Import required symbols from standard definitions
--

IMPORTS
    OBJECT-TYPE, MODULE-IDENTITY, NOTIFICATION-TYPE,
    Integer32, enterprises, IpAddress
        FROM SNMPv2-SMI

    TEXTUAL-CONVENTION, DisplayString
        FROM SNMPv2-TC

    snmpTrapAddress
        FROM SNMP-COMMUNITY-MIB;
--
--  FUJITSU SNMP MIB
--
eternuscs MODULE-IDENTITY
    LAST-UPDATED "201210010000Z"
    ORGANIZATION "FUJITSU LIMITED"
    CONTACT-INFO    
        "         FUJITSU LIMITED
		  storage-pm@ts.fujitsu.com
        "
    DESCRIPTION
	"This file defines the private FTS SNMP MIB.
         This mib contains general FUJITSU device info. All
         FUJITSU devices should support this mib."
    REVISION "201210010000Z"
    DESCRIPTION "changes for SNMPv2 conformance"
	::= { enterprises sni(231) sniProductMibs(2) 70 }

cs800 OBJECT IDENTIFIER ::= { eternuscs 2 }
cs800snmp OBJECT IDENTIFIER ::= { cs800 1 }

-- Groups

qSystemInfo           OBJECT IDENTIFIER ::= { cs800snmp 1 }
qTrapDestination      OBJECT IDENTIFIER ::= { cs800snmp 2 }
qTrapEnable           OBJECT IDENTIFIER ::= { cs800snmp 3 }
qTraps                OBJECT IDENTIFIER ::= { cs800snmp 4 }

--
-- Textual-Convention of some common data types for storage libraries 
--

-- Define the overall device state
--

DeviceState ::= INTEGER { unavailable(1), available(2), online(3), offline(4), goingonline(5), statenotavailable(6) }

-- Define the trap enabling variables
--

TrapToggle ::= INTEGER { disabled(1), enabled(2), trapnotavailable(3) }

--
-- System Info Group
--
-- The System Info group contains general system information
-- of all FUJITSU devices.
--

qDeviceName    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE(0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The host name of the FUJITSU device."
    ::= { qSystemInfo 1 }

qAssignedName  OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64)) 
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The assigned name of the FUJITSU device.
            If none is given, the default value
            is the name of the device (qDeviceName)."
    ::= { qSystemInfo 2 }

qLocation      OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The location of the FUJITSU device.  If none
             is provided, the value is an empty string." 
    ::= { qSystemInfo 3 }

qVendorId      OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64)) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The manufacturing vendor id."
    ::= { qSystemInfo 4 }

qProductId     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64)) 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The product model."
    ::= { qSystemInfo 5 }
 
qProductRev    OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..64))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The product revision."
    ::= { qSystemInfo 6 }

qState         OBJECT-TYPE
    SYNTAX      DeviceState
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The current state of the FUJITSU device."
    ::= { qSystemInfo 7 }

qTrapDescription     OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
            "A textual description of the trap sent."
    ::= { qSystemInfo 8 }

qSenseKey      OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
            "If available, a hexadecimal sense key value for the trap sent.
             If not available, the value is 0x00."
    ::= { qSystemInfo 9 }

qAsc           OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
            "If available, a hexadecimal ASC value for the trap sent.
             If not available, the value is 0x00."
    ::= { qSystemInfo 10 }

qAscq          OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION
            "If available, a hexadecimal ASCQ value for the trap sent.
             If not available, the value is 0x00."
    ::= { qSystemInfo 11 }

qSerialNumber   OBJECT-TYPE
    SYNTAX      DisplayString (SIZE (0..255))
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The serial number of the FUJITSU device."
    ::= { qSystemInfo 12 }
--
-- Trap Destination Group
--
-- The Trap Destination Group contains the IP Addresses
-- of the Management Consoles that are allowed to receive
-- traps from the SNMP Agent. The maximum number of
-- trap destination IP addresses that can be set in the
-- agent is 5.
 
qTrapAddress1  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP Address of the Management Console that
                 can receive the traps."
    ::= { qTrapDestination 1 }

qTrapAddress2  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP Address of the Management Console that
                 can receive the traps."
    ::= { qTrapDestination 2 }

qTrapAddress3  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP Address of the Management Console that
                 can receive the traps."
    ::= { qTrapDestination 3 }

qTrapAddress4  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP Address of the Management Console that
                 can receive the traps."
    ::= { qTrapDestination 4 }

qTrapAddress5  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION "The IP Address of the Management Console that
                 can receive the traps."
    ::= { qTrapDestination 5 }

qTrapIpAddress  OBJECT-TYPE
    SYNTAX      IpAddress
    MAX-ACCESS  accessible-for-notify
    STATUS      current
    DESCRIPTION "The IP Address of the System that sent the traps."
    ::= { qTrapDestination 13 }


--
-- Trap Enable Group
--
-- The Trap Enable group contains objects that the agent uses
-- to determine which traps are to be sent to the defined network
-- manager(s).  Each variable can be individually enabled or disabled.
--

qInfoEnable    OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected information
            traps are sent.  This type of trap will be sent to
            the defined management station(s) if the value of
            qInfoEnable is enabled(2)."
    ::= { qTrapEnable 1 }

qWarningEnable OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected warning
            traps are sent.  This type of trap will be sent to
            the defined management station(s) if the value of
            qWarningEnable is enabled(2)."
    ::= { qTrapEnable 2 }

qCriticalEnable OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected critical
            traps are sent.  This type of trap will be sent to
            the defined management station(s) if the value of
            qCriticalEnable is enabled(2)."
    ::= { qTrapEnable 3 }

qAvailableEnable OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected device available
            state change traps are sent.  This type of trap will be
            sent to the defined management station(s) if the value of
            qAvailableEnable is enabled(2)."
    ::= { qTrapEnable 4 }

qUnavailableEnable OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected device unavailable
            state change traps are sent.  This type of trap will be
            sent to the defined management station(s) if the value of
            qUnavailableEnable is enabled(2)."
    ::= { qTrapEnable 5 }

qNoInterventionNeededEnable    OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected device no
            intervention needed traps are sent.  This type of trap will
            be sent to the defined management station(s) if the value of
            qNoInterventionNeededEnable is enabled(2)."
    ::= { qTrapEnable 6 }

qRequestedInterventionEnable    OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected user requested
            intervention traps are sent.  This type of trap will
            be sent to the defined management station(s) if the
            value of qRequestedInterventionEnable is enabled(2)."
    ::= { qTrapEnable 7 }

qRequiredInterventionEnable    OBJECT-TYPE
    SYNTAX      TrapToggle
    MAX-ACCESS  read-write
    STATUS      current
    DESCRIPTION
            "The variable defines whether detected user required
            intervention traps are sent.  This type of trap will
            be sent to the defined management station(s) if the
            value of qRequiredInterventionEnable is enabled(2)."
    ::= { qTrapEnable 8 }

--
-- Traps
--
-- These traps are generated when an error is detected and the
-- appropriate trap flag is enabled.
--

qInfoTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "A condition has been detected that provides
             information about the Device. The qTrapDescription 
             variable provides more information about the trap. 
             This trap will only be sent if the value of qInfoEnable 
             is enabled(2)."
--#TYPE "Information event"
--#SUMMARY "Information: %s"
--#ARGUMENTS {1,0}
--#SEVERITY INFORMATIONAL
    ::= { qTraps 1 }


qWarningTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "A condition has been detected that provides
             information about the Device. The qTrapDescription 
             variable provides more information about the trap. 
             This trap will only be sent if the value of qWarningEnable
             is enabled(2)."
--#TYPE "Warning event"
--#SUMMARY "Warning: %s"
--#ARGUMENTS {1,0}
--#SEVERITY MINOR
    ::= { qTraps 2 }

qCriticalTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "A condition has been detected that provides
             information about the Device. The qTrapDescription 
             variable provides more information about the trap. 
             This trap will only be sent if the value of qCriticalEnable
             is enabled(2)."
--#TYPE "Critical event"
--#SUMMARY "Critical event: %s"
--#ARGUMENTS {1,0}
--#SEVERITY CRITICAL
    ::= { qTraps 3 }

qAvailableTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "The Device has changed from an unavailable to an
             available state. The qTrapDescription variable 
             provides more information about the trap.  This 
             trap will only be sent if the value of qAvailableEnable
             is enabled(2)."
--#TYPE "Device is available"
--#SUMMARY "Device has changed state from unavailable to available %s"
--#ARGUMENTS {1,0}
--#SEVERITY INFORMATIONAL
    ::= { qTraps 4 }

qUnavailableTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "The Device has changed from an available to an
             unavailable state. The qTrapDescription variable
             provides more information about the trap.  This 
             trap will only be sent if the value of qUnavailableEnable
             is enabled(2)."
--#TYPE "Device is unavailable"
--#SUMMARY "Device has changed state to unavailable %s"
--#ARGUMENTS {1,0}
--#SEVERITY MAJOR
    ::= { qTraps 5 }

qNoInterventionNeededTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "It has been detected that the device has returned
             to a condition where no user intervention is needed.
             The qTrapDescription variable provides
             more information about the trap.  This trap will 
             only be sent if the value of qNoInterventionNeededEnable
             is enabled(2)."
--#TYPE "No intervention needed"
--#SUMMARY "Device has returned to a state where no user intervention is needed %s"
--#ARGUMENTS {1,0}
--#SEVERITY INFORMATIONAL
    ::= { qTraps 6 }

qRequestedInterventionTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "It has been detected that the device has at least one
             component that is requesting user intervention.  The
             qTrapDescription variable provides 
             more information about the trap. This trap will
             only be sent if the value of qRequestedInterventionEnable
             is enabled(2)."
--#TYPE "Intervention requested"
--#SUMMARY "Device has reached a state where user intervention is requested %s"
--#ARGUMENTS {1,0}
--#SEVERITY MAJOR
    ::= { qTraps 7 }

qRequiredInterventionTrap NOTIFICATION-TYPE
    OBJECTS {
		snmpTrapAddress,
                qTrapDescription
    }
    STATUS  current
    DESCRIPTION
            "It has been detected that the device has at least one
             component that requires user intervention.  The
             qTrapDescription variable provides more
             information about the trap. This trap will
             only be sent if the value of qRequiredInterventionEnable
             is enabled(2)."
--#TYPE "Intervention required"
--#SUMMARY "Device has reached a state where user intervention is needed %s"
--#ARGUMENTS {1,0}
--#SEVERITY CRITICAL
    ::= { qTraps 8 }

END