FSC-THRESHOLD-REPORT-MIB

All MIBs › FSC-THRESHOLD-REPORT-MIB

Category: Alarm and Event Management, Domain: Server Hardware, Vendor: Fujitsu

Description: Fujitsu Siemens Computers MIB for configuring and reporting threshold-based alerts on server hardware sensors.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FSC-THRESHOLD-REPORT-MIB?

FSC-THRESHOLD-REPORT-MIB is a Fujitsu Siemens Computers (FSC) proprietary MIB for configuring and reporting threshold-based alerts derived from server hardware sensor readings. It exposes agent identity information (company, version, build), overall threshold and report status objects, a rule table describing configured threshold rules, and status/message objects reflecting the outcome of the most recent configuration attempt. It is explicitly a hardware-health monitoring MIB: threshThresholdStatus and threshPerformanceStatus summarize whether any configured sensor threshold (e.g., temperature, voltage, fan speed) has been breached, giving a rolled-up hardware-health signal for the server. It builds on and reports for the underlying FSC hardware-sensor MIBs (the actual raw sensor values live elsewhere; this module manages thresholds and reports against them) rather than duplicating sensor tables itself. It is deployed on Fujitsu Siemens/Fujitsu PRIMERGY-class rack and tower servers for proactive hardware-fault alerting. Engineers can download the FSC-THRESHOLD-REPORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in FSC-THRESHOLD-REPORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Fujitsu Siemens Computers (FSC)/Fujitsu PRIMERGY server

Monitoring Examples

An admin would poll threshThresholdStatus and threshReportStatus to get a quick summary of whether any monitored sensor has crossed a configured threshold, and check threshPerformanceStatus for a performance-related warning state. Walking threshRuleTable/threshRuleEntry by threshRuleName shows each configured threshold rule (e.g., a CPU temperature or fan-speed limit) and its current evaluation, while threshLastSetResultMessage and threshConfigurationChanged reveal whether a recent attempt to update thresholds via SNMP succeeded or failed.

What Can Be Monitored

overall threshold status
overall performance status
configured threshold rules
last configuration-change result
report status

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
IpAddress
enterprises

From RFC1213-MIB

DisplayString
PhysAddress
mib-2

OIDs

OID symbolic	OID numeric	Type	Access	Description
sni	1.3.6.1.4.1.231
sniProductMibs	1.3.6.1.4.1.231.2
fscThresholdReportMib	1.3.6.1.4.1.231.2.47
threshObjects	1.3.6.1.4.1.231.2.47.1
threshAgentInfo	1.3.6.1.4.1.231.2.47.1.1
STR threshAgentId	1.3.6.1.4.1.231.2.47.1.1.1	DisplayString	read-only	Agent identification string
STR threshAgentCompany	1.3.6.1.4.1.231.2.47.1.1.2	DisplayString	read-only	Agent's company name (e.g. Fujitsu Siemens Computers)
STR threshAgentVersion	1.3.6.1.4.1.231.2.47.1.1.3	DisplayString	read-only	Agent's version string (e.g. 1.05)
STR threshAgentBuild	1.3.6.1.4.1.231.2.47.1.1.4	DisplayString	read-only	Compilation time and date of agent program
threshAgentOptions	1.3.6.1.4.1.231.2.47.1.2
INT threshConfigurationChanged	1.3.6.1.4.1.231.2.47.1.2.1	INTEGER	read-only	Timestamp indicating last configuration modification time at any table (time_t format: seconds since 1970/01/01)
THR threshThresholdStatus	1.3.6.1.4.1.231.2.47.1.2.2	ThresholdReportStatus	read-only	Replies the current threshold status, whether threshold monitoring is enabled and currently active: unknown: unknown status (problem in underlying threshold management services?) disabled: no enabled rulesets available enabledNotActive: ruleset(s) enabled, but no one currently active (in terms of time) active: rulesets enabled and threshold monitoring currently active error: a severe error happened in the threshold manager - no thresholds activated
THR threshReportStatus	1.3.6.1.4.1.231.2.47.1.2.3	ThresholdReportStatus	read-only	Replies the current report status, whether report monitoring is enabled and currently active: unknown: unknown status (problem in underlying report management services?) disabled: no enabled reportsets available enabledNotActive: reportset(s) enabled, but no one currently active (in terms of time) active: reportsets enabled and report monitoring currently active error: a severe error happened in the report manager - no reports activated
STR threshLastSetResultMessage	1.3.6.1.4.1.231.2.47.1.2.4	DisplayString	read-only	Result message of last SET operation. Useful for debugging purpose when testing SNMP client software.
PER threshPerformanceStatus	1.3.6.1.4.1.231.2.47.1.2.5	PerformanceStatus	read-only	Information about the server performance: the worst value of all active thresholds; the severity of each rule is defined with object 'threshRulePerfStatusSeverity': unknown: unknown status (problem in underlying threshold management services?) normal: all active thresholds are in normal range (no thresholds exceeded) informational: one or more thresholds with 'informational' severity exceeded warning: one or more thresholds with 'warning' severity exceeded critical: one or more thresholds with 'critical' severity exceeded
thresholds	1.3.6.1.4.1.231.2.47.1.3
threshRuleTable	1.3.6.1.4.1.231.2.47.1.3.1		not-accessible	Description of all rules for threshold management
threshRuleEntry	1.3.6.1.4.1.231.2.47.1.3.1.1		not-accessible
STR threshRuleName	1.3.6.1.4.1.231.2.47.1.3.1.1.1	DisplayString	read-write	Rule name (index, unique string)
STR threshRuleDescription	1.3.6.1.4.1.231.2.47.1.3.1.1.2	DisplayString	read-write	Detailed rule description
STR threshRuleUserComment	1.3.6.1.4.1.231.2.47.1.3.1.1.3	DisplayString	read-write	Comment which can be set by the user; will be sent with event
STR threshRuleHelpText	1.3.6.1.4.1.231.2.47.1.3.1.1.4	DisplayString	read-write	Detailed description of the rule (for dynamic generation of help pages)
INT threshRulePollInterval	1.3.6.1.4.1.231.2.47.1.3.1.1.5	INTEGER	read-write	Threshold polling interval (1..n seconds)
STR threshRuleResourceName	1.3.6.1.4.1.231.2.47.1.3.1.1.6	DisplayString	read-write	Name of monitored resource (index in ResourceTable)
INT threshRuleInstMonitor	1.3.6.1.4.1.231.2.47.1.3.1.1.7	INTEGER	read-write	Resource instances monitoring type - defines how to handle multiple instances: any: any of the instances meets condition average: the average of all instances meets condition
STR threshRuleInstIndexes	1.3.6.1.4.1.231.2.47.1.3.1.1.8	DisplayString	read-write	Resource instances index value list (regular expression, like '[1-5]' (indexes 1..5), '[1,2,5]' (indexes 1, 2, or 5), '1[2-4]' (indexes 12..14); monitor all instances if empty
STR threshRuleInstPatterns	1.3.6.1.4.1.231.2.47.1.3.1.1.9	DisplayString	read-write	Resource instances index pattern list (regular expression, like '^/root$\|^/home$\|^/opt' (one of /root, /home or /opt*), '^data$\|^system[1-3]$' (one of 'data' or 'system1'...'system3'); monitor all instances if empty.
STR threshRuleTargetName	1.3.6.1.4.1.231.2.47.1.3.1.1.10	DisplayString	read-write	Name of an entry in the TargetTable, where to send the data queries to (localhost if empty)
INT threshRuleValueType	1.3.6.1.4.1.231.2.47.1.3.1.1.11	INTEGER	read-write	Type of value monitoring (absolute, delta): absolute: the current (absolute) value is tested to meet condition deltaAny: the delta to the value of the previous poll interval is tested (not regarding whether value increase or decrease) deltaIncrease: only increasing delta values are tested deltaDecrease: only decreasing delta values are tested
INT threshRuleValuation	1.3.6.1.4.1.231.2.47.1.3.1.1.12	INTEGER	read-write	Rule valuation - defines how a value is measured: singleValue: one single value is tested to meet condition averageLinear: sum of all measured values devided by the number of values averageMuted: last value plus (delta value divided by 2)
INT threshRuleWatchPeriod	1.3.6.1.4.1.231.2.47.1.3.1.1.13	INTEGER	read-write	Monitoring period described as number of polling cycles (for average value calculation)
INT threshRuleOperator	1.3.6.1.4.1.231.2.47.1.3.1.1.14	INTEGER	read-write	Operator to be applied on the monitored resource; the rule applies when the monitored value is: equal: equal to the threshold value (object 'threshRuleThresholdValue') notEqual: not equal to the threshold value less: less than the threshold value lessOrEqual: less than or equal to the threshold value greater: greater than the threshold value greaterOrEqual: greater than or equal to the threshold value withinRange: within the specified threshold value range (objects 'threshRuleRangeMinValue and 'threshRuleRangeMaxValue') outOfRange: out of the specified threshold value range existToNonExist: value existed and now no longer exists nonExistToExist: value did not exist and now exists existChange: value existence changed (in any way)
INT threshRuleThresholdValue	1.3.6.1.4.1.231.2.47.1.3.1.1.15	INTEGER	read-write	Threshold value (for boolean operators)
INT threshRuleRangeMinValue	1.3.6.1.4.1.231.2.47.1.3.1.1.16	INTEGER	read-write	Lower threshold range value (for range operators; x >= min value)
INT threshRuleRangeMaxValue	1.3.6.1.4.1.231.2.47.1.3.1.1.17	INTEGER	read-write	Upper threshold range value (for range operators; open interval --> x < max value)
INT threshRuleOccurenceCount	1.3.6.1.4.1.231.2.47.1.3.1.1.18	INTEGER	read-write	The occurence counter for event generation: if count is 0 or 1, event is generated on every occurence, else event is generated after the specified number of continuous rule occurences
STR threshRuleEventName	1.3.6.1.4.1.231.2.47.1.3.1.1.19	DisplayString	read-write	Name of the event (from EventTable) to be created when condition is met
INT threshRuleEventControl	1.3.6.1.4.1.231.2.47.1.3.1.1.20	INTEGER	read-write	The frequency of event generation: singleShot: only once until condition is not met again continuous: event raises at every poll cycle when the rule meets condition continousDelay: like 'continous', but not before a delay (object 'threshRuleEventDelay') has passed or the rule met 'good condition' in the mean time
INT threshRuleEventDelay	1.3.6.1.4.1.231.2.47.1.3.1.1.21	INTEGER	read-write	The minimum delay (in number of poll cycles) after that an event will be sent again if object 'threshRuleEventFrequency' is set to 'continuousDelay'
TRU threshRuleEventAlternating	1.3.6.1.4.1.231.2.47.1.3.1.1.22	TrueFalse	read-write	If true, an event is also sent when condition is no longer met (good condition)
ROW threshRuleRowStatus	1.3.6.1.4.1.231.2.47.1.3.1.1.23	RowStatus	read-write	Rule table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO threshRuleStorageType	1.3.6.1.4.1.231.2.47.1.3.1.1.24	StorageType	read-only	Rule table storage type (see RFC2579; see comment on top of this MIB)
OCT threshRuleCurrentValue	1.3.6.1.4.1.231.2.47.1.3.1.1.25	OCTET STRING	read-only	Current name(s) and value(s) of the rule, delivered as XML string: root tag is , each value enclosed by tag , e.g. 66; for multiple instances the tag appears multiple times. ATTENTION: Currently this object can only be used with non-SNMP resources! For SNMP resources the manager must get this value directly using its OID.
INT threshRuleFireEvent	1.3.6.1.4.1.231.2.47.1.3.1.1.26	INTEGER	read-write	Fire this event (for testing purpose): write a non-zero value to fire this event (reading this value always returns zero)
INT threshRulePerfStatusSeverity	1.3.6.1.4.1.231.2.47.1.3.1.1.27	INTEGER	read-write	How to set the PerformanceStatus when the rule meets condition: ignore: rule status is not considered in the PerformanceStatus informational: when the rule meets condition, the PerformanceStatus goes to 'informational' warning: when the rule meets condition, the PerformanceStatus goes to 'warning' critical: when the rule meets condition, the PerformanceStatus goes to 'critical'
INT threshRuleTableChanged	1.3.6.1.4.1.231.2.47.1.3.2	INTEGER	read-only	Timestamp indicating last modification of rule table (time_t format: seconds since 1970/01/01)
threshRulesetTable	1.3.6.1.4.1.231.2.47.1.3.3		not-accessible	Description of all rulesets for threshold management
threshRulesetEntry	1.3.6.1.4.1.231.2.47.1.3.3.1		not-accessible
STR threshRulesetName	1.3.6.1.4.1.231.2.47.1.3.3.1.1	DisplayString	read-write	Rule name (index, unique string)
STR threshRulesetDescription	1.3.6.1.4.1.231.2.47.1.3.3.1.2	DisplayString	read-write	Detailed ruleset description
INT threshRulesetStartTime	1.3.6.1.4.1.231.2.47.1.3.3.1.3	INTEGER	read-write	Time when to start (activate) this ruleset (optional, -1 if not available; minutes since midnight).
INT threshRulesetStopTime	1.3.6.1.4.1.231.2.47.1.3.3.1.4	INTEGER	read-write	Time when to stop this ruleset (optional, -1 if not available; minutes since midnight).
TRU threshRulesetRunning	1.3.6.1.4.1.231.2.47.1.3.3.1.5	TrueFalse	read-only	Shows whether the ruleset is currently running (regarding to start/stop time)
ROW threshRulesetRowStatus	1.3.6.1.4.1.231.2.47.1.3.3.1.6	RowStatus	read-write	Ruleset table row status (RFC2579; see comment on top of this MIB) supported values: active, notInService, createAndGo, createAndWait, destroy
STO threshRulesetStorageType	1.3.6.1.4.1.231.2.47.1.3.3.1.7	StorageType	read-only	Ruleset table storage type (see RFC2579; see comment on top of this MIB)
threshRulesetContentsTable	1.3.6.1.4.1.231.2.47.1.3.4		not-accessible	Content mapping table of all rulesets for threshold management Index 1 is from the RulesetTable, index 2 is a rule number (not stored in database).
threshRulesetContentsEntry	1.3.6.1.4.1.231.2.47.1.3.4.1		not-accessible
INT threshRulesetContentsRuleIndex	1.3.6.1.4.1.231.2.47.1.3.4.1.1	INTEGER	read-write	Ruleset contents table rule number (second index; 1..n; this number is not stored in the ruleset database)
STR threshRulesetContentsRuleName	1.3.6.1.4.1.231.2.47.1.3.4.1.2	DisplayString	read-write	Ruleset contents table rule name - this name must match to an entry in the rule table! If the rule is missing in the rule table, it will be ignored here.
ROW threshRulesetContentsRowStatus	1.3.6.1.4.1.231.2.47.1.3.4.1.3	RowStatus	read-write	Ruleset contents table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO threshRulesetContentsStorageType	1.3.6.1.4.1.231.2.47.1.3.4.1.4	StorageType	read-only	Ruleset contents table storage type (see RFC2579; see comment on top of this MIB)
INT threshRulesetsChanged	1.3.6.1.4.1.231.2.47.1.3.5	INTEGER	read-only	Timestamp indicating last modification of ruleset or ruleset contents table (time_t format: seconds since 1970/01/01)
threshEventTable	1.3.6.1.4.1.231.2.47.1.3.6		not-accessible	Event destinations for threshold event creation
threshEventEntry	1.3.6.1.4.1.231.2.47.1.3.6.1		not-accessible
STR threshEventName	1.3.6.1.4.1.231.2.47.1.3.6.1.1	DisplayString	read-write	Event name (index, unique string)
INT threshEventType	1.3.6.1.4.1.231.2.47.1.3.6.1.2	INTEGER	read-write	Type of event (SNMP trap,...) For SNMP traps the trap numbers and enterprise ID are predefined and apply to the trap definitions in this MIB.
INT threshEventSeverity	1.3.6.1.4.1.231.2.47.1.3.6.1.3	INTEGER	read-write	Severity of event (e.g. for SNMP traps). For SNMP traps this severity defines which one of the predefined traps is to be sent.
ROW threshEventRowStatus	1.3.6.1.4.1.231.2.47.1.3.6.1.4	RowStatus	read-write	Event table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO threshEventStorageType	1.3.6.1.4.1.231.2.47.1.3.6.1.5	StorageType	read-only	Event table storage type (see RFC2579; see comment on top of this MIB)
INT threshEventTableChanged	1.3.6.1.4.1.231.2.47.1.3.7	INTEGER	read-only	Timestamp indicating last modification of event table (time_t format: seconds since 1970/01/01)
reports	1.3.6.1.4.1.231.2.47.1.4
reportTable	1.3.6.1.4.1.231.2.47.1.4.1		not-accessible	Description of all reports for report management
reportEntry	1.3.6.1.4.1.231.2.47.1.4.1.1		not-accessible
STR reportName	1.3.6.1.4.1.231.2.47.1.4.1.1.1	DisplayString	read-write	Report name (index, unique string)
STR reportDescription	1.3.6.1.4.1.231.2.47.1.4.1.1.2	DisplayString	read-write	Detailed rule description
STR reportUserComment	1.3.6.1.4.1.231.2.47.1.4.1.1.3	DisplayString	read-write	Comment which can be set by the user; will be sent with event
STR reportHelpText	1.3.6.1.4.1.231.2.47.1.4.1.1.4	DisplayString	read-write	Detailed description of the report (for dynamic generation of help pages)
INT reportPollInterval	1.3.6.1.4.1.231.2.47.1.4.1.1.5	INTEGER	read-write	Report polling interval (1..n seconds)
INT reportMaxEntries	1.3.6.1.4.1.231.2.47.1.4.1.1.6	INTEGER	read-write	Maximum number of recorded report entries (prevent from getting hard disk out of space; 0 = no limit).
STR reportResourceName	1.3.6.1.4.1.231.2.47.1.4.1.1.7	DisplayString	read-write	Name of monitored resource (index in ResourceTable)
INT reportInstMonitor	1.3.6.1.4.1.231.2.47.1.4.1.1.8	INTEGER	read-write	Resource instances monitoring type - defines how to handle multiple instances: all: all of the instances are monitored average: the average of all instances is calculated and monitored
STR reportInstIndexes	1.3.6.1.4.1.231.2.47.1.4.1.1.9	DisplayString	read-write	Resource instances index value list (regular expression, like '[1-5]' (indexes 1..5), '[1,2,5]' (indexes 1, 2, or 5), '1[2-4]' (indexes 12..14); monitor all instances if empty
STR reportInstPatterns	1.3.6.1.4.1.231.2.47.1.4.1.1.10	DisplayString	read-write	Resource instances index pattern list (regular expression, like '^/root$\|^/home$\|^/opt' (one of /root, /home or /opt*), '^data$\|^system[1-3]$' (one of 'data' or 'system1'...'system3'); monitor all instances if empty.
STR reportTargetName	1.3.6.1.4.1.231.2.47.1.4.1.1.11	DisplayString	read-write	Name of an entry in the TargetTable, where to send the data queries to (localhost if empty)
ROW reportRowStatus	1.3.6.1.4.1.231.2.47.1.4.1.1.12	RowStatus	read-write	Report table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO reportStorageType	1.3.6.1.4.1.231.2.47.1.4.1.1.13	StorageType	read-only	Report table storage type (see RFC2579; see comment on top of this MIB)
OCT reportCurrentValue	1.3.6.1.4.1.231.2.47.1.4.1.1.14	OCTET STRING	read-only	Current name(s) and value(s) of the report resource, delivered as XML string: root tag is , each value enclosed by tag , e.g. 66; for multiple instances the tag appears multiple times. ATTENTION: Currently this object can only be used with non-SNMP resources! For SNMP resources the manager must get this value directly using its OID.
INT reportTableChanged	1.3.6.1.4.1.231.2.47.1.4.2	INTEGER	read-only	Timestamp indicating last modification of report table (time_t format: seconds since 1970/01/01)
reportSetTable	1.3.6.1.4.1.231.2.47.1.4.3		not-accessible	Description of all reports set properties for report management
reportSetEntry	1.3.6.1.4.1.231.2.47.1.4.3.1		not-accessible
STR reportSetName	1.3.6.1.4.1.231.2.47.1.4.3.1.1	DisplayString	read-write	Short report set name, used for identication
STR reportSetDescription	1.3.6.1.4.1.231.2.47.1.4.3.1.2	DisplayString	read-write	Detailed report set description
INT reportSetStartTime	1.3.6.1.4.1.231.2.47.1.4.3.1.3	INTEGER	read-write	Time when to start (activate) this report set (optional, -1 if not available; minutes since midnight).
INT reportSetStopTime	1.3.6.1.4.1.231.2.47.1.4.3.1.4	INTEGER	read-write	Time when to stop this report set (optional, -1 if not available; minutes since midnight).
INT reportSetRecordingEnd	1.3.6.1.4.1.231.2.47.1.4.3.1.5	INTEGER	read-write	Date when reporting should be finished (time_t format: seconds since 1970/01/01; 0 = no end date, must be stopped manually) Reporting terminates automatically either when the next day after the end date or the maximum entry limit is reached.
TRU reportSetRunning	1.3.6.1.4.1.231.2.47.1.4.3.1.6	TrueFalse	read-only	Shows whether the report set is currently running (regarding to start/stop time)
ROW reportSetRowStatus	1.3.6.1.4.1.231.2.47.1.4.3.1.7	RowStatus	read-write	Report set table row status (RFC2579; see comment on top of this MIB) supported values: active, notInService, createAndGo, createAndWait, destroy
STO reportSetStorageType	1.3.6.1.4.1.231.2.47.1.4.3.1.8	StorageType	read-only	Report set table storage type (see RFC2579; see comment on top of this MIB)
INT reportSetTableChanged	1.3.6.1.4.1.231.2.47.1.4.4	INTEGER	read-only	Timestamp indicating last modification of report set table (time_t format: seconds since 1970/01/01)
reportSetContentsTable	1.3.6.1.4.1.231.2.47.1.4.5		not-accessible	Content mapping table of all rulesets for threshold management Indexes are from RulesetTable and RuleTable.
reportSetContentsEntry	1.3.6.1.4.1.231.2.47.1.4.5.1		not-accessible
INT reportSetContentsReportIndex	1.3.6.1.4.1.231.2.47.1.4.5.1.1	INTEGER	read-write	reportSet contents table report number (second index; 1..n; this number is not stored in the ruleset database)
STR reportSetContentsReportName	1.3.6.1.4.1.231.2.47.1.4.5.1.2	DisplayString	read-write	reportSet contents table report name - this name must match to an entry in the reportSet table! If the report is missing in the reportSet table, it will be ignored here.
ROW reportSetContentsRowStatus	1.3.6.1.4.1.231.2.47.1.4.5.1.3	RowStatus	read-write	Report set contents table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO reportSetContentsStorageType	1.3.6.1.4.1.231.2.47.1.4.5.1.4	StorageType	read-only	Report set contents table storage type (see RFC2579; see comment on top of this MIB)
INT reportSetContentsTableChanged	1.3.6.1.4.1.231.2.47.1.4.6	INTEGER	read-only	Timestamp indicating last modification of ruleset contents table (time_t format: seconds since 1970/01/01)
reportValueRecordPropTable	1.3.6.1.4.1.231.2.47.1.4.7		not-accessible	Properties of the corresponding ValueRecord
reportValueRecordPropEntry	1.3.6.1.4.1.231.2.47.1.4.7.1		not-accessible
INT reportHighestIndexInUse	1.3.6.1.4.1.231.2.47.1.4.7.1.1	INTEGER	read-only	the highest available index in the ValueRecordTable.
INT reportOldestIndexInUse	1.3.6.1.4.1.231.2.47.1.4.7.1.2	INTEGER	read-only	the index of the oldest value in the ValueRecordTable. index-1 ist the most current value.
reportValueRecordTable	1.3.6.1.4.1.231.2.47.1.4.8		not-accessible	Record Values of an appointed report. Starts with index 1 and ends with index HighestIndexInUse This table is now OBSOLETE (may take too much time to browse it when it gathered too many data records). The report values have to be read by using ServerView Remote Connector service.
reportValueRecordEntry	1.3.6.1.4.1.231.2.47.1.4.8.1		not-accessible
STR reportValueRecord	1.3.6.1.4.1.231.2.47.1.4.8.1.1	DisplayString	read-only	Record value of the report in XML format
INT reportValueRecordIndex	1.3.6.1.4.1.231.2.47.1.4.8.1.2	INTEGER	not-accessible	Index of the Value Record
threshResources	1.3.6.1.4.1.231.2.47.1.5
threshResourceTable	1.3.6.1.4.1.231.2.47.1.5.1		not-accessible	Available resources for threshold and report management
threshResourceEntry	1.3.6.1.4.1.231.2.47.1.5.1.1		not-accessible
STR threshResourceName	1.3.6.1.4.1.231.2.47.1.5.1.1.1	DisplayString	read-write	Resource name (index, unique string)
STR threshResourceDescription	1.3.6.1.4.1.231.2.47.1.5.1.1.2	DisplayString	read-write	Short description of the resource (for display in front end applications)
STR threshResourceHelpText	1.3.6.1.4.1.231.2.47.1.5.1.1.3	DisplayString	read-write	Detailed description of the resource (for dynamic generation of help pages)
INT threshResourceReqType	1.3.6.1.4.1.231.2.47.1.5.1.1.4	INTEGER	read-write	Resource request type - defines how to get the value (by SNMP, Windows Registry, for built-in the objects 'ReqString' and 'InstNameReq' are not needed)
STR threshResourceReqString	1.3.6.1.4.1.231.2.47.1.5.1.1.5	DisplayString	read-write	Resource value request string: An asterisk '' marks an enumeration of multiple values and can only stand at the end of the request string. SNMP: '1.3.6.1.4.1.231.2.10.2.2.5.1.3.' Windows Registry: 'HKLM\Software\FSC\key\@value' 'Software\FSC\key\@*' Root keys (can be omitted): HKLM = HKEY_LOCAL_MACHINE (default) HKCU = HKEY_CURRENT_USER HKCC = HKEY_CURRENT_CONFIG HKPD = HKEY_PERFORMANCE_DATA
STR threshResourceInstNameReq	1.3.6.1.4.1.231.2.47.1.5.1.1.6	DisplayString	read-write	Resource instance name request string (syntax and type like threshResourceReqString)
ROW threshResourceRowStatus	1.3.6.1.4.1.231.2.47.1.5.1.1.7	RowStatus	read-write	Resource table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO threshResourceStorageType	1.3.6.1.4.1.231.2.47.1.5.1.1.8	StorageType	read-only	Resource table storage type (see RFC2579; see comment on top of this MIB)
STR threshResourceValueUnit	1.3.6.1.4.1.231.2.47.1.5.1.1.9	DisplayString	read-write	Unit of a value of this resource. E.g. '%','MByte'
STR threshResourceContainerName	1.3.6.1.4.1.231.2.47.1.5.1.1.10	DisplayString	read-write	Name of the container which contains ReqString. SNMP: contains the MIB name
STR threshResourceGroupName	1.3.6.1.4.1.231.2.47.1.5.1.1.11	DisplayString	read-write	Name of the group the resource belongs to
INT threshResourceTableChanged	1.3.6.1.4.1.231.2.47.1.5.2	INTEGER	read-only	Timestamp indicating last modification of resource table (time_t format: seconds since 1970/01/01)
threshTargetTable	1.3.6.1.4.1.231.2.47.1.5.3		not-accessible	Target destination names for threshold/report resource value reading Allows to send value requests to more than one target machines.
threshTargetEntry	1.3.6.1.4.1.231.2.47.1.5.3.1		not-accessible
STR threshTargetName	1.3.6.1.4.1.231.2.47.1.5.3.1.1	DisplayString	read-write	Resource target name (index, unique string)
STR threshTargetAddress	1.3.6.1.4.1.231.2.47.1.5.3.1.2	DisplayString	read-write	Resource target address (string) This may be an IP address (dotted string representation) or a DNS name.
ROW threshTargetRowStatus	1.3.6.1.4.1.231.2.47.1.5.3.1.3	RowStatus	read-write	Resource target table row status (RFC2579; see comment on top of this MIB) supported values: active, createAndGo, destroy
STO threshTargetStorageType	1.3.6.1.4.1.231.2.47.1.5.3.1.4	StorageType	read-only	Resource target table storage type (see RFC2579; see comment on top of this MIB)
INT threshTargetTableChanged	1.3.6.1.4.1.231.2.47.1.5.4	INTEGER	read-only	Timestamp indicating last modification of target table (time_t format: seconds since 1970/01/01)
threshNotifications	1.3.6.1.4.1.231.2.47.2
NTF threshTrapThresholdExceededCritical	1.3.6.1.4.1.231.2.47.2.0.2200			A threshold has been exceeded.
NTF threshTrapThresholdExceededMajor	1.3.6.1.4.1.231.2.47.2.0.2201			A threshold has been exceeded.
NTF threshTrapThresholdExceededMinor	1.3.6.1.4.1.231.2.47.2.0.2202			A threshold has been exceeded.
NTF threshTrapThresholdExceededInformational	1.3.6.1.4.1.231.2.47.2.0.2203			A threshold has been exceeded.
NTF threshTrapThresholdResume	1.3.6.1.4.1.231.2.47.2.0.2204			A threshold has been resumed.
threshNotificationsInfo	1.3.6.1.4.1.231.2.47.2.1
STR threshTrapInfoServerName	1.3.6.1.4.1.231.2.47.2.1.1	DisplayString	not-accessible	Name of the server the trap comes from
INT threshTrapInfoTime	1.3.6.1.4.1.231.2.47.2.1.2	INTEGER	not-accessible	Time when the trap occured (in seconds since 01/01/1970 00:00h)
STR threshTrapInfoRuleName	1.3.6.1.4.1.231.2.47.2.1.3	DisplayString	not-accessible	The name of the rule which met condition
STR threshTrapInfoRuleValue	1.3.6.1.4.1.231.2.47.2.1.4	DisplayString	not-accessible	The value that of the resource that met condition (single or average value; numeric values are converted to strings)
STR threshTrapInfoRuleUserComment	1.3.6.1.4.1.231.2.47.2.1.5	DisplayString	not-accessible	The user's description of the rule which met condition; user may define an action what to do when an event raises

RFC description

Fujitsu threshold and report MIB for system threshold value monitoring and report management.

Start monitoring Fujitsu Siemens Computers (FSC)/Fujitsu PRIMERGY server (hardware sensor threshold alerting) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FSC-THRESHOLD-REPORT-MIB

What Is FSC-THRESHOLD-REPORT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description