| OID symbolic | OID numeric | Type | Access | Description |
|---|
| mfrMib | 1.3.6.1.2.1.10.47 | | | This is the MIB used to control and monitor the multilink
frame relay (MFR) function described in FRF.16. |
| mfrMibScalarObjects | 1.3.6.1.2.1.10.47.1 | | | |
| I32 mfrBundleMaxNumBundles | 1.3.6.1.2.1.10.47.1.1 | Integer32 | read-only | This object is used to inform the manager of the
maximum number of bundles supported by this device. |
| TES mfrBundleNextIndex | 1.3.6.1.2.1.10.47.1.2 | TestAndIncr | read-write | This object is used to assist the manager in
selecting a value for mfrBundleIndex during row creation
in the mfrBundleTable. It can also be used to avoid race
conditions with multiple managers trying to create
rows in the table (see RFC 2494 [RFC2494] for one such
alogrithm). |
| mfrMibBundleObjects | 1.3.6.1.2.1.10.47.2 | | | |
| mfrBundleTable | 1.3.6.1.2.1.10.47.2.3 | | not-accessible | The bundle configuration and status table. There
is a one-to-one correspondence between a bundle
and an interface represented in the ifTable.
The following objects of the ifTable have specific
meaning for an MFR bundle:
ifAdminStatus - the bundle admin status
ifOperStatus - the bundle operational status
ifSpeed - the current bandwidth of the bundle
ifInUcastPkts - the number of frames received
on the bundle
ifOutUcastPkts - the number of frames transmitted
on the bundle
ifInErrors - frame (not fragment) errors
ifOutErrors - frame (not fragment) errors |
| mfrBundleEntry | 1.3.6.1.2.1.10.47.2.3.1 | | not-accessible | An entry in the bundle table. |
| I32 mfrBundleIndex | 1.3.6.1.2.1.10.47.2.3.1.1 | Integer32 | not-accessible | The index into the table. While this corresponds
to an entry in the ifTable, the value of mfrBundleIndex
need not match that of the ifIndex in the ifTable.
A manager can use mfrBundleNextIndex to select a unique
mfrBundleIndex for creating a new row. |
| NUM mfrBundleIfIndex | 1.3.6.1.2.1.10.47.2.3.1.2 | InterfaceIndex | read-only | The value must match an entry in the interface
table whose ifType must be set to frf16MfrBundle(163).
For example: if the value of mfrBundleIfIndex is 10,
then a corresponding entry should be present in
the ifTable with an index of 10 and an ifType of 163. |
| ROW mfrBundleRowStatus | 1.3.6.1.2.1.10.47.2.3.1.3 | RowStatus | read-create | The mfrBundleRowStatus object allows create, change,
and delete operations on bundle entries. |
| STR mfrBundleNearEndName | 1.3.6.1.2.1.10.47.2.3.1.4 | SnmpAdminString | read-create | The configured name of the bundle. |
| INT mfrBundleFragmentation | 1.3.6.1.2.1.10.47.2.3.1.5 | INTEGER | read-create | Controls whether the bundle performs/accepts
fragmentation and re-assembly. The possible
values are:
enable(1) - Bundle links will fragment frames
disable(2) - Bundle links will not fragment
frames. |
| I32 mfrBundleMaxFragSize | 1.3.6.1.2.1.10.47.2.3.1.6 | Integer32 | read-create | The maximum fragment size supported. Note that this
is only valid if mfrBundleFragmentation is set to enable(1).
Zero is not a valid fragment size.
A bundle that does not support fragmentation must return
this object with a value of -1. |
| INT mfrBundleTimerHello | 1.3.6.1.2.1.10.47.2.3.1.7 | INTEGER | read-create | The configured MFR Hello Timer value. |
| INT mfrBundleTimerAck | 1.3.6.1.2.1.10.47.2.3.1.8 | INTEGER | read-create | The configured MFR T_ACK value. |
| INT mfrBundleCountMaxRetry | 1.3.6.1.2.1.10.47.2.3.1.9 | INTEGER | read-create | The MFR N_MAX_RETRY value. |
| INT mfrBundleActivationClass | 1.3.6.1.2.1.10.47.2.3.1.10 | INTEGER | read-create | Controls the conditions under which the bundle is activated.
The following settings are available:
mfrBundleActivationClassA(1) - at least one must link up
mfrBundleActivationClassB(2) - all links must be up
mfrBundleActivationClassC(3) - a certain number must be
up. Refer to
mfrBundleThreshold for
the required number.
mfrBundleActivationClassD(4) - custom (implementation
specific). |
| I32 mfrBundleThreshold | 1.3.6.1.2.1.10.47.2.3.1.11 | Integer32 | read-create | Specifies the number of links that must be in operational
'up' state before the bundle will transition to an
operational up/active state. If the number of
operational 'up' links falls below this value,
then the bundle will transition to an inactive
state.
Note - this is only valid when mfrBundleActivationClass
is set to mfrBundleActivationClassC or, depending upon the
implementation, to mfrBundleActivationClassD. A bundle that
is not set to one of these must return this object with a
value of -1. |
| I32 mfrBundleMaxDiffDelay | 1.3.6.1.2.1.10.47.2.3.1.12 | Integer32 | read-create | The maximum delay difference between the bundle
links.
A value of -1 indicates that this object does not contain
a valid value |
| INT mfrBundleSeqNumSize | 1.3.6.1.2.1.10.47.2.3.1.13 | INTEGER | read-create | Controls whether the standard FRF.12 12-bit
sequence number is used or the optional 24-bit
sequence number. |
| I32 mfrBundleMaxBundleLinks | 1.3.6.1.2.1.10.47.2.3.1.14 | Integer32 | read-only | The maximum number of bundle links supported for
this bundle. |
| I32 mfrBundleLinksConfigured | 1.3.6.1.2.1.10.47.2.3.1.15 | Integer32 | read-only | The number of links configured for the bundle. |
| I32 mfrBundleLinksActive | 1.3.6.1.2.1.10.47.2.3.1.16 | Integer32 | read-only | The number of links that are active. |
| I32 mfrBundleBandwidth | 1.3.6.1.2.1.10.47.2.3.1.17 | Integer32 | read-only | The amount of available bandwidth on the bundle |
| STR mfrBundleFarEndName | 1.3.6.1.2.1.10.47.2.3.1.18 | SnmpAdminString | read-only | Name of the bundle received from the far end. |
| C32 mfrBundleResequencingErrorsEx | 1.3.6.1.2.1.10.47.2.3.1.19 | Counter32 | read-only | A count of the number of resequencing errors. Each event
may correspond to multiple lost frames. Example:
Say sequence number 56, 59 and 60 is received for DLCI 100.
It is decided by some means that sequence 57 and 58 is lost.
This counter should then be incremented by ONE, even though
two frames were lost. |
| mfrBundleIfIndexMappingTable | 1.3.6.1.2.1.10.47.2.4 | | not-accessible | A table mapping the values of ifIndex to the
mfrBundleIndex. This is required in order to find
the mfrBundleIndex given an ifIndex. The mapping of
mfrBundleIndex to ifIndex is provided by the
mfrBundleIfIndex entry in the mfrBundleTable. |
| mfrBundleIfIndexMappingEntry | 1.3.6.1.2.1.10.47.2.4.1 | | not-accessible | Each row describes one ifIndex to mfrBundleIndex mapping. |
| I32 mfrBundleIfIndexMappingIndex | 1.3.6.1.2.1.10.47.2.4.1.2 | Integer32 | read-only | The mfrBundleIndex of the given ifIndex. |
| mfrMibBundleLinkObjects | 1.3.6.1.2.1.10.47.3 | | | |
| mfrBundleLinkTable | 1.3.6.1.2.1.10.47.3.1 | | not-accessible | The bundle link configuration and status table. There
is a one-to-one correspondence between a bundle link
and a physical interface represented in the ifTable. The
ifIndex of the physical interface is used to index the
bundle link table, and to create rows.
The following objects of the ifTable have specific
meaning for an MFR bundle link:
ifAdminStatus - the bundle link admin status
ifOperStatus - the bundle link operational
status
ifSpeed - the bandwidth of the bundle
link interface
ifInUcastPkts - the number of frames received
on the bundle link
ifOutUcastPkts - the number of frames transmitted
on the bundle link
ifInErrors - frame and fragment errors
ifOutErrors - frame and fragment errors |
| mfrBundleLinkEntry | 1.3.6.1.2.1.10.47.3.1.1 | | not-accessible | An entry in the bundle link table. |
| ROW mfrBundleLinkRowStatus | 1.3.6.1.2.1.10.47.3.1.1.1 | RowStatus | read-create | The mfrBundleLinkRowStatus object allows create, change,
and delete operations on mfrBundleLink entries.
The create operation must fail if no physical interface
is associated with the bundle link. |
| I32 mfrBundleLinkConfigBundleIndex | 1.3.6.1.2.1.10.47.3.1.1.2 | Integer32 | read-create | The mfrBundleLinkConfigBundleIndex object allows
the manager to control the bundle to which the bundle
link is assigned. If no value were in this field, then
the bundle would remain in NOT_READY rowStatus and be
unable to go to active. With an appropriate mfrBundleIndex
in this field, then we could put the mfrBundleLink row in
NOT_IN_SERVICE or ACTIVE rowStatus. |
| STR mfrBundleLinkNearEndName | 1.3.6.1.2.1.10.47.3.1.1.3 | SnmpAdminString | read-create | The configured bundle link name that is sent to the far end. |
| MFR mfrBundleLinkState | 1.3.6.1.2.1.10.47.3.1.1.4 | MfrBundleLinkState | read-only | Current bundle link state as defined by the MFR protocol
described in Annex A of FRF.16. |
| STR mfrBundleLinkFarEndName | 1.3.6.1.2.1.10.47.3.1.1.5 | SnmpAdminString | read-only | Name of bundle link received from far end. |
| STR mfrBundleLinkFarEndBundleName | 1.3.6.1.2.1.10.47.3.1.1.6 | SnmpAdminString | read-only | Name of far end bundle for this link received from far end. |
| I32 mfrBundleLinkDelay | 1.3.6.1.2.1.10.47.3.1.1.7 | Integer32 | read-only | Current round-trip delay for this bundle link. The
value -1 is returned when an implementation does not
support measurement of the bundle link delay. |
| C32 mfrBundleLinkFramesControlTx | 1.3.6.1.2.1.10.47.3.1.1.8 | Counter32 | read-only | Number of MFR control frames sent. |
| C32 mfrBundleLinkFramesControlRx | 1.3.6.1.2.1.10.47.3.1.1.9 | Counter32 | read-only | Number of valid MFR control frames received. |
| C32 mfrBundleLinkFramesControlInvalid | 1.3.6.1.2.1.10.47.3.1.1.10 | Counter32 | read-only | The number of invalid MFR control frames received. |
| C32 mfrBundleLinkTimerExpiredCount | 1.3.6.1.2.1.10.47.3.1.1.11 | Counter32 | read-only | Number of times the T_HELLO or T_ACK timers expired. |
| C32 mfrBundleLinkLoopbackSuspected | 1.3.6.1.2.1.10.47.3.1.1.12 | Counter32 | read-only | The number of times a loopback has been suspected
(based upon the use of magic numbers). |
| C32 mfrBundleLinkUnexpectedSequence | 1.3.6.1.2.1.10.47.3.1.1.13 | Counter32 | read-only | The number of data MFR frames discarded because the sequence
number of the frame for a DLCI was less than (delayed frame)
or equal to (duplicate frame) the one expected for that DLCI.
Example:
Say frames with sequence numbers 56, 58, 59 is received for
DLCI 100. While waiting for sequence number 57 another frame
with sequence number 58 arrives. Frame 58 is discarded and
the counter is incremented. |
| C32 mfrBundleLinkMismatch | 1.3.6.1.2.1.10.47.3.1.1.14 | Counter32 | read-only | The number of times that the unit has been notified by the
remote peer that the bundle name is inconsistent with other
bundle links attached to the far-end bundle. |
| mfrMibTraps | 1.3.6.1.2.1.10.47.4 | | | |
| mfrMibTrapsPrefix | 1.3.6.1.2.1.10.47.4.0 | | | |
| NTF mfrMibTrapBundleLinkMismatch | 1.3.6.1.2.1.10.47.4.0.1 | | | This trap indicates that a bundle link mismatch has
been detected. The following objects are reported:
mfrBundleNearEndName: configured name of near end bundle
mfrBundleFarEndName: previously reported name of
far end bundle
mfrBundleLinkNearEndName: configured name of near end bundle
mfrBundleLinkFarEndName: reported name of far end bundle
mfrBundleLinkFarEndBundleName: currently reported name of
far end bundle
Note: that the configured items may have been configured
automatically.
Note: The mfrBundleLinkMismatch counter is incremented when
the trap is sent. |
| mfrMibConformance | 1.3.6.1.2.1.10.47.5 | | | |
| mfrMibGroups | 1.3.6.1.2.1.10.47.5.1 | | | |
| mfrMibBundleGroup | 1.3.6.1.2.1.10.47.5.1.1 | | | Group of objects describing bundles. |
| mfrMibBundleLinkGroup | 1.3.6.1.2.1.10.47.5.1.2 | | | Group of objects describing bundle links. |
| mfrMibTrapGroup | 1.3.6.1.2.1.10.47.5.1.3 | | | Group of objects describing notifications (traps). |
| mfrMibCompliances | 1.3.6.1.2.1.10.47.5.2 | | | |
| mfrMibCompliance | 1.3.6.1.2.1.10.47.5.2.1 | | | The compliance statement for equipment that implements
the FRF16 MIB. All of the current groups are mandatory,
but a number of objects may be read-only if the
implementation does not allow configuration. |
