FR-MIB

All MIBs › FR-MIB

Organization: Nortel Networks

Last Updated: 1999-07-01

Category: Frame Relay, Standard: IETF

Description: Frame Relay generic MIB providing DLCI management, circuit statistics, and network-to-user interface management objects for Frame Relay access devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FR-MIB?

FR-MIB is a vendor-neutral Frame Relay MIB providing management objects for Frame Relay network interfaces, DLCIs (data link connection identifiers), and LMI (Local Management Interface) signaling parameters on Frame Relay access devices. It exposes per-interface configuration such as frame size, interface/LMI type, and DCE/DTE-side LMI timer parameters (N391, N392, N393), alongside a PVC/DLCI table for circuit-level status. Its monitoring role centers on WAN link and software/protocol status: an operator can confirm whether a Frame Relay interface and its PVCs are enabled and correctly negotiated per the LMI protocol, revealing misconfigured or down permanent virtual circuits rather than exposing physical sensor data. It builds on and complements the standard IF-MIB for the underlying physical/serial interface and the DLCI concepts standardized in RFC 2115/1315-era Frame Relay MIBs. It is typically deployed on WAN routers and Frame Relay access devices in legacy carrier or enterprise WAN links, and the FR-MIB RFC lineage (RFC 2115/1315) remains a useful reference for understanding its object definitions.

IPNetwork Monitor allows you to monitor SNMP objects defined in FR-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

vendor-neutral, standards-based MIB, not tied to a specific manufacturer
Frame Relay access router/WAN device

Monitoring Examples

An admin would walk nnfrTable/nnfrTableEntry to check nnfrIfEnable and nnfrEnablePvcAll, confirming that Frame Relay is administratively enabled on an interface and that PVCs are permitted, and would inspect nnfrLmiType alongside nnfrLmiDceN392/nnfrLmiDceN393 or nnfrLmiDteN392/nnfrLmiDteN391 to verify the LMI error-threshold and monitored-event-count parameters match on both ends of the link. A mismatch in nnfrFrameSize or nnfrIfType versus the carrier's provisioned service would reveal a misconfigured Frame Relay circuit causing frame drops.

What Can Be Monitored

Frame Relay interface enable state
PVC/DLCI enable state
frame size
interface/LMI type
LMI timer and threshold parameters (N391/N392/N393)

Imported Objects

From BUNDLE-MIB

nnbundleId

OBJECT-TYPE

From NT-ENTERPRISE-DATA-MIB

ntEnterpriseDataTasmanMgmt

OBJECT-IDENTITY

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

RowStatus
TruthValue

How to Use in IPNetwork Monitor

Example using nnfrStatsFramesRx OID:

Select a device implementing FR-MIB as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type nnfrStatsFramesRx into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Numbers of frames received. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
nnfrMib	1.3.6.1.4.1.562.73.1.1.1.16			This file contains MIB module for Frame Relay implementation.
nnfrTable	1.3.6.1.4.1.562.73.1.1.1.16.1		not-accessible	A list of a Frame Relay interface configuration parameters. The table contains parameters for both the uni and multi link frame-relay interface.
nnfrTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.1.1		not-accessible	An entry in the frTable. The bundle Id forms the index into the table.
T/F nnfrIfEnable	1.3.6.1.4.1.562.73.1.1.1.16.1.1.1	TruthValue	read-write	Enables or disables the frame-relay interface. By default frame- relay interface is enabled. Writing zero (0) disables frame-relay interface.
T/F nnfrEnablePvcAll	1.3.6.1.4.1.562.73.1.1.1.16.1.1.2	TruthValue	read-write	Enables all PVCs related to the interface. By default all PVCs related to an interface are disabled. Writing One (1) enables all PVCs at the same time for an interface indexed by bundleId.
I32 nnfrFrameSize	1.3.6.1.4.1.562.73.1.1.1.16.1.1.3	Integer32	read-write	Maximum Size of the frame that will be configured for this Frame Relay interface. The value for frame size ranges from 56 to 4096 bytes, with a default value of 1600 bytes.
INT nnfrIfType	1.3.6.1.4.1.562.73.1.1.1.16.1.1.4	INTEGER	read-write	Indicates the interface type for the frame-relay interface.
INT nnfrLmiType	1.3.6.1.4.1.562.73.1.1.1.16.1.1.5	INTEGER	read-write	Local management Interface type for the frame-relay interface. It can take any of the following three values: ansi - ANSI T1.617 (Annex D), cisco - Cisco LMI, q933a - ITU-T Q.933 (Annex A) To disable lmi operation, set the value to none(0).
I32 nnfrLmiDceN392	1.3.6.1.4.1.562.73.1.1.1.16.1.1.6	Integer32	read-write	DCE/UNI error threshold value. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
I32 nnfrLmiDceN393	1.3.6.1.4.1.562.73.1.1.1.16.1.1.7	Integer32	read-write	DCE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
I32 nnfrLmiDteN392	1.3.6.1.4.1.562.73.1.1.1.16.1.1.8	Integer32	read-write	DTE/UNI error threshold. Ranges from 1 to 10, with a default value of 9. To configure the value of this variable, LMI type should be configured.
I32 nnfrLmiDteN393	1.3.6.1.4.1.562.73.1.1.1.16.1.1.9	Integer32	read-write	DTE/UNI monitored events count. Ranges from 1 to 10, with a default value of 10. To configure the value of this variable, LMI type should be configured.
I32 nnfrLmiDteN391	1.3.6.1.4.1.562.73.1.1.1.16.1.1.10	Integer32	read-write	DTE/UNI full status polling interval. Ranges from 1 to 255, with a default value of 6. To configure the value of this variable, LMI type should be configured.
I32 nnfrLmiKeepalive	1.3.6.1.4.1.562.73.1.1.1.16.1.1.11	Integer32	read-write	Local management interface keepalive polling interval time in seconds. The value for this ranges from 5 seconds to 255 seconds with a default value of 10 seconds. To configure the value of this variable, LMI type should be configured.
I32 nnmfrAckMsgTimer	1.3.6.1.4.1.562.73.1.1.1.16.1.1.12	Integer32	read-write	The time to wait for an ADD_LINK_ACK message before timing out.
I32 nnmfrAckMsgMaxRetry	1.3.6.1.4.1.562.73.1.1.1.16.1.1.13	Integer32	read-write	Maximum number of Retries for the Ack Msg. This variable can be set on a multilink bundle.
INT nnmfrClass	1.3.6.1.4.1.562.73.1.1.1.16.1.1.14	INTEGER	read-write	classA -- bundle is UP when 1 link is UP classB -- bundle is UP when all links are UP classC -- bundle is UP when user-specific # of links are UP. In the case of classC, mfrClassThreshold should be configured with mfrClass in an atomic set operation. This variable can be set on a multilink bundle but not on a uni link bundle.
I32 nnmfrClassThreshold	1.3.6.1.4.1.562.73.1.1.1.16.1.1.15	Integer32	read-write	Threshold - minimum number of links required to activate bundle, for a mfrClass, classC. This variable can be set on a multilink bundle but not on a uni link bundle.
I32 nnmfrFrameSize	1.3.6.1.4.1.562.73.1.1.1.16.1.1.16	Integer32	read-write	The frame size for multi-link frame relay. This variable can be set on a multilink bundle but not on a uni link bundle.
I32 nnmfrHelloTimer	1.3.6.1.4.1.562.73.1.1.1.16.1.1.17	Integer32	read-write	Hello timer in seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
I32 nnmfrSegThreshold	1.3.6.1.4.1.562.73.1.1.1.16.1.1.18	Integer32	read-write	Segment threshold packet size in bytes. This variable can be set on a multilink bundle but not on a uni link bundle.
I32 nnmfrDiffDelay	1.3.6.1.4.1.562.73.1.1.1.16.1.1.19	Integer32	read-write	Differential delay in milli seconds. This variable can be set on a multilink bundle but not on a uni link bundle.
nnfrPvcTable	1.3.6.1.4.1.562.73.1.1.1.16.2		not-accessible	A list of Frame Relay PVC parameters.
nnfrPvcTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.2.1		not-accessible	An entry in the frPvcTable
I32 nnfrPvcDlci	1.3.6.1.4.1.562.73.1.1.1.16.2.1.1	Integer32	not-accessible	Data Link Connection Identifier of the PVC. The value ranges from 16 to 991. The Dlci is unique for a bundle but Dlci numbers can be reused across bundles.
T/F nnfrPvcEnable	1.3.6.1.4.1.562.73.1.1.1.16.2.1.2	TruthValue	read-create	Enables PVC for given interface name and DLCI number. By default PVC is enabled. Writing one(1) on this enables PVC, zero (0) disables it.
STR nnfrPvcDescr	1.3.6.1.4.1.562.73.1.1.1.16.2.1.3	DisplayString	read-create	Description for the configured PVC.
IP nnfrPvcIpAddr	1.3.6.1.4.1.562.73.1.1.1.16.2.1.4	IpAddress	read-create	IP address to be configured for the PVC. PVC IP subnet Mask variable should also be configured alongwith this variable. A set on this variable will be successful only if the subnetmask is also set in the same request. To unconfigure the Ip address, a set is issued with the value of the ip address as 0.0.0.0
IP nnfrPvcIpSubnetMask	1.3.6.1.4.1.562.73.1.1.1.16.2.1.5	IpAddress	read-create	Subnet mask to be configured alongwith PVC IP address. This variable should be configured alongwith PVC IP address.
IP nnfrPvcRemoteIpAddr	1.3.6.1.4.1.562.73.1.1.1.16.2.1.6	IpAddress	read-create	Remote IP address to be mapped for PVC
INT nnfrPvcPolicingEnable	1.3.6.1.4.1.562.73.1.1.1.16.2.1.7	INTEGER	read-create	This variable is to disable/enable policing for PVC. Writing zero (0) on this disables policing for the PVC. By default policing is enabled.
T/F nnfrPvcPolicingDe	1.3.6.1.4.1.562.73.1.1.1.16.2.1.8	TruthValue	read-create	If enabled, received frames that exceed policing threshold, will be tagged with DE bit. This variable can be configured only if policing is enabled.
I32 nnfrPvcPolicingCir	1.3.6.1.4.1.562.73.1.1.1.16.2.1.9	Integer32	read-create	Committed Information Rate( bits per second ) in receive direction for PVC. This variable can be configured only if policing is enabled.
I32 nnfrPvcPolicingBc	1.3.6.1.4.1.562.73.1.1.1.16.2.1.10	Integer32	read-create	Committed Burst ( bits ) in receive direction for PVC. This variable can be configured only if policing is enabled.
I32 nnfrPvcPolicingBe	1.3.6.1.4.1.562.73.1.1.1.16.2.1.11	Integer32	read-create	Excess burst ( bits ) in receive direction for PVC. This variable can be configured only if policing enabled.
I32 nnfrPvcShapingCir	1.3.6.1.4.1.562.73.1.1.1.16.2.1.12	Integer32	read-create	The committed information rate (in bits per second) to be configured for the PVC.
I32 nnfrPvcShapingBcMax	1.3.6.1.4.1.562.73.1.1.1.16.2.1.13	Integer32	read-create	The maximum committed burst (bits) to be configured for the PVC.
I32 nnfrPvcShapingBcMin	1.3.6.1.4.1.562.73.1.1.1.16.2.1.14	Integer32	read-create	The minimum committed burst (bits) to be configured for the PVC.
I32 nnfrPvcShapingBe	1.3.6.1.4.1.562.73.1.1.1.16.2.1.15	Integer32	read-create	The excess burst (bits) to be configured for the PVC.
I32 nnfrPvcDlciForSwitching	1.3.6.1.4.1.562.73.1.1.1.16.2.1.16	Integer32	read-create	Data Link Connection Identifier of the PVC. The value for this variable ranges from 16 to 991. frPvcBundleNameForSwitching should be set with frPvcDlciForSwitching as an atomic set.
STR nnfrPvcBundleNameForSwitching	1.3.6.1.4.1.562.73.1.1.1.16.2.1.17	DisplayString	read-create	The name of the bundle configured for Switching.
ROW nnfrPvcRowStatus	1.3.6.1.4.1.562.73.1.1.1.16.2.1.18	RowStatus	read-create	To create a row set row status to a value CreateAndGo(4), indexed by bundle Id and the desired dlci number.
nnfrStatsTable	1.3.6.1.4.1.562.73.1.1.1.16.3		not-accessible	The statistics objects for a frame-relay interface.
nnfrStatsTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.3.1		not-accessible	An entry in the frStatsTable.
C32 nnfrStatsFramesRxEx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.1	Counter32	read-only	Numbers of frames received.
C32 nnfrStatsInvFramesRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.2	Counter32	read-only	Number of invalid frames received
C32 nnfrStatsFECNsRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.3	Counter32	read-only	Number of frames received with FECN bit on
C32 nnfrStatsBECNsRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.4	Counter32	read-only	Number of frames received with BECN bit on.
C32 nnfrStatsShortFramesRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.5	Counter32	read-only	Number of short frames received.
C32 nnfrStatsLongFramesRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.6	Counter32	read-only	Number of long frames received.
C32 nnfrStatsInvDLCIsRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.7	Counter32	read-only	Number of frames with invalid dlci received
C32 nnfrStatsUnknownDLCIsRx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.8	Counter32	read-only	Number of frames with unknown dlci received
C32 nnfrStatsFramesTx	1.3.6.1.4.1.562.73.1.1.1.16.3.1.9	Counter32	read-only	Number of frames transmitted.
nnfrPvcStatsTable	1.3.6.1.4.1.562.73.1.1.1.16.4		not-accessible	FR PVC Statistics Table
nnfrPvcStatsTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.4.1		not-accessible	An entry in the FrPvcStats Table
C32 nnfrPvcStatsBytesRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.1	Counter32	read-only	Number of bytes received on a pvc since boot or last statistics clear.
C32 nnfrPvcStatsBytesTxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.2	Counter32	read-only	Number of bytes transmitted on a pvc since boot or last statistics clear.
C32 nnfrPvcStatsPktsRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.3	Counter32	read-only	Number of packets received since boot or last statistics clear.
C32 nnfrPvcStatsPktsTxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.4	Counter32	read-only	Number of packets transmitted since boot or last statistics clear.
C32 nnfrPvcStatsErrPktsRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.5	Counter32	read-only	Number of errored packets received since boot or last statistics clear.
C32 nnfrPvcStatsUpDownStatesLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.4.1.6	Counter32	read-only	Number of times state(up or down) of the pvc changed in since boot or last statistics clear.
C32 nnfrPvcStatsBytesRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.7	Counter32	read-only	Number of bytes received in the last five minutes.
C32 nnfrPvcStatsBytesTxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.8	Counter32	read-only	Number of bytes transmitted in the last five minutes.
C32 nnfrPvcStatsPktsRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.9	Counter32	read-only	Number of packets received in the last five minutes.
C32 nnfrPvcStatsPktsTxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.10	Counter32	read-only	Number of packets transmitted in the last five minutes.
C32 nnfrPvcStatsErrPktsRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.11	Counter32	read-only	Number of errored packets received in the last five minutes.
C32 nnfrPvcStatsUpDownStatesLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.4.1.12	Counter32	read-only	Number of times state(up or down) of the pvc changed in the last five minutes.
nnfrAvcTable	1.3.6.1.4.1.562.73.1.1.1.16.5		not-accessible	End-to-End MFR avc parameters are defined in this table.
nnfrAvcTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.5.1		not-accessible	avc parameter entries are listed in this table.
I32 nnfrAvcId	1.3.6.1.4.1.562.73.1.1.1.16.5.1.1	Integer32	not-accessible	frAvcId is the identifier of an avc. To configure an avc, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the avcTable, the frAvcId is entered as 65535.
I32 nnfrAvcDlci	1.3.6.1.4.1.562.73.1.1.1.16.5.1.2	Integer32	read-create	Data Link Connection Identifier of the avc. The value ranges from 16 to 1022. This number is unique across all the avcs created. Once set during creation, it can't be changed.
STR nnfrAvcName	1.3.6.1.4.1.562.73.1.1.1.16.5.1.3	DisplayString	read-create	Name of the avc. To configure an avc, this parameter must be set. That is, a descriptive name should be given to an avc. The maximum length of an avc name is 8 characters. This parameter is set once during the creation of an avc. an avc can not be renamed.
IP nnfrAvcIpAddr	1.3.6.1.4.1.562.73.1.1.1.16.5.1.4	IpAddress	read-create	The avc's source IP address. This is one of the parameters required to set up IP multiplexing for an avc. Also the parameters avcIpAddr and avcSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0
IP nnfrAvcIpSubnetMask	1.3.6.1.4.1.562.73.1.1.1.16.5.1.5	IpAddress	read-create	This parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a avc. This parameter is set along with the avcIpAddr parameter during the same request.
IP nnfrAvcRemoteIpAddr	1.3.6.1.4.1.562.73.1.1.1.16.5.1.6	IpAddress	read-create	Remote IP address to be mapped for the avc. If configured, the arp table is updated with this static entry and inverse arp request packets are no longer sent for this interface.To unconfigure this parameter, a set operation is performed with the value 0.0.0.0 .
INT nnfrAvcClass	1.3.6.1.4.1.562.73.1.1.1.16.5.1.7	INTEGER	read-write	classA -- avc is UP when at least 1 cvc is UP classB -- avc is UP when all cvcs are UP classC -- avc is UP when user-specified # of cvcs are UP classD -- avc is UP when user-specified min. CIR of each cvc is met classE -- avc is UP when user-specified min. CIR of the avc is met In the case of classC/D/E, frAvcClassThreshold should be configured along with avcClass in an atomic set operation.
I32 nnfrAvcClassThreshold	1.3.6.1.4.1.562.73.1.1.1.16.5.1.8	Integer32	read-write	Threshold - minimum number of links required to activate bundle, for the avcClass 'classC'. For 'classD' or 'classE', the value will be in bits per second. For 'classA' and 'classB', this value will hold no significance.
I32 nnfrAvcFragmentSize	1.3.6.1.4.1.562.73.1.1.1.16.5.1.9	Integer32	read-write	The frame size for multi-link frame relay End-to-End avc in bytes. This value defines the maximum size of any fragment that can be transmitted on any cvc. Frames larger than this size must be fragmented.
I32 nnfrAvcSegThreshold	1.3.6.1.4.1.562.73.1.1.1.16.5.1.10	Integer32	read-write	Segment threshold packet size in bytes. This value defines the minimum size of any fragment that can be transmitted on any cvc. Frames smaller than this size must not be fragmented.
INT nnfrAvcSequence	1.3.6.1.4.1.562.73.1.1.1.16.5.1.11	INTEGER	read-write	multilink frame relay sequence number length (short = 12 bits ; long = 24 bits.24 bit sequence space increases MFR header by 2 more bytes, but in those situations where the differential delay is high ( > 50 ms ), larger sequence numbers help reduce packet drops that can happen when short sequence numbers complete a cycle quickly.
I32 nnfrAvcDiffDelay	1.3.6.1.4.1.562.73.1.1.1.16.5.1.12	Integer32	read-write	Differential delay in milli seconds. This variable can be set only when the AVC is in Enhanced FRF.15 mode. This value indicates the maximum tolerable differential delay between any two CVCs. Any CVC whose diff. delay value exceeds this configured value will be brought down from active data transfer until it's diff. delay values recover. Possible Values: 0 and 10ms to 128ms.Setting the value of 0 will disable diff. delay related CVC bring down feature.
INT nnfrAvcEnhancedMode	1.3.6.1.4.1.562.73.1.1.1.16.5.1.13	INTEGER	read-write	Enhanced FRF.15 mode is a modification of the standard FRF.15 to improve the end to end CVC status integrity and to calculate and act on differential delay build up. By default, the AVC is created in Standard FRF.15 mode.
I32 nnfrAvcNoOfCvcs	1.3.6.1.4.1.562.73.1.1.1.16.5.1.14	Integer32	read-only	Indicates the number of links configured in the avc.
I32 nnfrAvcTotalBw	1.3.6.1.4.1.562.73.1.1.1.16.5.1.15	Integer32	read-only	Indicates the total bandwidth for this avc. The avc bandwidth is the aggregated band- widths of all the links assigned to a particular avc.
T/F nnfrAvcEnable	1.3.6.1.4.1.562.73.1.1.1.16.5.1.16	TruthValue	read-create	Enables the AVC. By default AVC is enabled. Writing one(1) on this enables AVC, zero(0) disables it.
ROW nnfrAvcRowStatus	1.3.6.1.4.1.562.73.1.1.1.16.5.1.17	RowStatus	read-create	frAvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating an avc or deleting an avc. In order to add a row to the avc table, a set on this parameter should be done with the value 4 (createAndGo) and frAvcId index to be used is 65535. A request to create a row can be completed successfully only if a set on the avcRowStatus(4), frAvcName and frAvcDlci come in the same request. To delete a row this parameter has to be set with the value 6 (destroy).
nnfrCvcTable	1.3.6.1.4.1.562.73.1.1.1.16.6		not-accessible	End-to-End MFR cvc parameters are defined in this table.
nnfrCvcTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.6.1		not-accessible	cvc parameter entries are listed in this table.
STR nnfrCvcBundleName	1.3.6.1.4.1.562.73.1.1.1.16.6.1.1	DisplayString	read-only	The name of the bundle of the CVC which needs to be added to the avc. This parameter is used for display only.
T/F nnfrCvcEnable	1.3.6.1.4.1.562.73.1.1.1.16.6.1.2	TruthValue	read-create	Enables/disables the CVC. By default CVC is enabled. Writing one(1) on this enables CVC, zero(0) disables it.
ROW nnfrCvcRowStatus	1.3.6.1.4.1.562.73.1.1.1.16.6.1.3	RowStatus	read-create	frCvcRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to adding or removing a CVC from an AVC. Adding a new row will require to index by the frAvcId,bundleId and frPvcDlci. Use proper index values and set RowStatus to CreateAndGo (4) to create a new row. To destroy, use value Destroy (6).
nnfrAvcStatsTable	1.3.6.1.4.1.562.73.1.1.1.16.7		not-accessible	The statistics objects for a frame-relay interface.
nnfrAvcStatsTableEntry	1.3.6.1.4.1.562.73.1.1.1.16.7.1		not-accessible	An entry in the frAvcStatsTable.
C32 nnfrAvcStatsBytesRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.1	Counter32	read-only	Number of bytes received on an avc since boot or last statistics clear.
C32 nnfrAvcStatsBytesTxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.2	Counter32	read-only	Number of bytes transmitted on an avc since boot or last statistics clear.
C32 nnfrAvcStatsPktsRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.3	Counter32	read-only	Number of packets received since boot or last statistics clear.
C32 nnfrAvcStatsPktsTxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.4	Counter32	read-only	Number of packets transmitted since boot or last statistics clear.
C32 nnfrAvcStatsErrPktsRxLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.5	Counter32	read-only	Number of errored packets received since boot or last statistics clear.
C32 nnfrAvcStatsUpDownStatesLastBootOrClear	1.3.6.1.4.1.562.73.1.1.1.16.7.1.6	Counter32	read-only	Number of times state(up or down) of the avc changed in since boot or last statistics clear.
C32 nnfrAvcStatsBytesRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.7	Counter32	read-only	Number of bytes received in the last five minutes.
C32 nnfrAvcStatsBytesTxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.8	Counter32	read-only	Number of bytes transmitted in the last five minutes.
C32 nnfrAvcStatsPktsRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.9	Counter32	read-only	Number of packets received in the last five minutes.
C32 nnfrAvcStatsPktsTxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.10	Counter32	read-only	Number of packets transmitted in the last five minutes.
C32 nnfrAvcStatsErrPktsRxLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.11	Counter32	read-only	Number of errored packets received in the last five minutes.
C32 nnfrAvcStatsUpDownStatesLastFiveMins	1.3.6.1.4.1.562.73.1.1.1.16.7.1.12	Counter32	read-only	Number of times state(up or down) of the avc changed in the last five minutes.

RFC description

Defines managed objects for Frame Relay network interfaces and services, as specified in RFC 2954, managing FR circuits, traffic, and statistics.

Start monitoring Vendor-neutral Frame Relay access router/WAN device, any manufacturer with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FR-MIB