FD-SWITCH-MIB

All MIBs › FD-SWITCH-MIB

Organization: epon eoc factory.

Last Updated: 2010-05-27

Category: Technology: EPON/PON, Technology: Switching/L2, Vendor: C-Data

Description: C-Data FD-series Ethernet switch MIB for managing integrated switching functionality in OLT aggregation devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is FD-SWITCH-MIB?

FD-SWITCH-MIB is a vendor MIB from C-Data Technology covering the core Ethernet switching functionality embedded in its FD-series OLT/PON aggregation devices, though the source module description is minimal ("core switch mib module") and no object names were captured for grounding. Such core-switch MIBs typically expose general categories including VLAN configuration, port link status, and forwarding/switching table data alongside basic system identification. Based on the vendor and product line, it would be used to monitor hardware and software status such as switch port link state and basic system health, complementing the device's PON-specific alarm MIBs which handle ONU/OLT-specific fault conditions. It likely depends on or is deployed alongside FD-series PON/OLT MIBs (e.g., FD-TRAP-MIB) and standard IF-MIB/BRIDGE-MIB conventions for interface and switching data. It would be deployed on C-Data FD-series GPON/EPON OLT devices that include an integrated Ethernet aggregation switch, where FD-SWITCH-MIB SNMP monitoring would track port and VLAN status on that switch fabric.

IPNetwork Monitor allows you to monitor SNMP objects defined in FD-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

C-Data FD-series GPON/EPON OLT (integrated switch module)

Monitoring Examples

No object or table names were available in the source for this module, so a concrete polling scenario cannot be grounded in real identifiers. Based on the module name and vendor pattern, it would likely expose port and VLAN status tables for the OLT's integrated switch fabric, but this cannot be confirmed from the available data.

Imported Objects

From EPON-EOC-MIB

epon	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 bridgeForwardDelay	1.3.6.1.4.1.34592.1.3.2.6.1.4	Integer32	read-write
I32 bridgeHelloTime	1.3.6.1.4.1.34592.1.3.2.6.1.7	Integer32	read-only
MAC bridgeIdAddr	1.3.6.1.4.1.34592.1.3.2.6.1.6	MacAddress	read-only
I32 bridgeMaxAge	1.3.6.1.4.1.34592.1.3.2.6.1.3	Integer32	read-write
INT bridgePri	1.3.6.1.4.1.34592.1.3.2.6.1.2	INTEGER	read-write
coreSwitch	1.3.6.1.4.1.34592.1.3.2			core switch mib module
coreSwitchCompliance	1.3.6.1.4.1.34592.1.3.2.10.2.1			The compliance statement
coreSwitchCompliances	1.3.6.1.4.1.34592.1.3.2.10.2
coreSwitchConformance	1.3.6.1.4.1.34592.1.3.2.10
coreSwitchGroups	1.3.6.1.4.1.34592.1.3.2.10.1
INT destinationPort	1.3.6.1.4.1.34592.1.3.2.7.1	INTEGER	read-write	a mirroring destination port, one of none & ge1~ge16, 0 means 'NONE'
SNI destinedSNIPort	1.3.6.1.4.1.34592.1.3.2.1.2	SniPortList	read-write
IP ifDefautGateway	1.3.6.1.4.1.34592.1.3.2.2.1.1.5	IpAddress	read-write
I32 ifIndex	1.3.6.1.4.1.34592.1.3.2.2.1.1.1	Integer32	not-accessible
IP ifIpAddr	1.3.6.1.4.1.34592.1.3.2.2.1.1.3	IpAddress	read-write
STR ifName	1.3.6.1.4.1.34592.1.3.2.2.1.1.2	DisplayString	read-only
IP ifNetMask	1.3.6.1.4.1.34592.1.3.2.2.1.1.4	IpAddress	read-write
INT ifShutDown	1.3.6.1.4.1.34592.1.3.2.2.1.1.7	INTEGER	read-write
INT ifStatus	1.3.6.1.4.1.34592.1.3.2.2.1.1.8	INTEGER	read-only
I32 ifVlan	1.3.6.1.4.1.34592.1.3.2.2.1.1.6	Integer32	read-write
igmpsnooping	1.3.6.1.4.1.34592.1.3.2.8
INT igmpsnoopingAdmin	1.3.6.1.4.1.34592.1.3.2.8.1	INTEGER	read-write	enable or disable igmp-snooping.
INT igmpsnoopingHostAgingTime	1.3.6.1.4.1.34592.1.3.2.8.3	INTEGER	read-write	setting igmp-snooping member port aging-time.
INT igmpsnoopingQueryProxy	1.3.6.1.4.1.34592.1.3.2.8.5	INTEGER	read-write	setting igmp-snooping query proxy.
INT igmpsnoopingRouterAgingTime	1.3.6.1.4.1.34592.1.3.2.8.2	INTEGER	read-write	setting igmp-snooping router-port aging-time.
OCT igmpsnoopingVlanData	1.3.6.1.4.1.34592.1.3.2.8.4	OCTET STRING	read-write	igmpsnooping vlan data.
inBandInterface	1.3.6.1.4.1.34592.1.3.2.2
inbandNetIfGroup	1.3.6.1.4.1.34592.1.3.2.10.1.1			A collection of objects providing inband network interface configuration
mirror	1.3.6.1.4.1.34592.1.3.2.7
mirrorGroup	1.3.6.1.4.1.34592.1.3.2.10.1.7			Description.
netInterfaceEntry	1.3.6.1.4.1.34592.1.3.2.2.1.1		not-accessible
netInterfaceTable	1.3.6.1.4.1.34592.1.3.2.2.1		not-accessible
INT operation	1.3.6.1.4.1.34592.1.3.2.7.5	INTEGER	read-write	operation: delete:clear all the mirror data,disable mirroring function.
I32 proSupported	1.3.6.1.4.1.34592.1.3.2.4.1.1.2	Integer32	read-write
proSupportedEntry	1.3.6.1.4.1.34592.1.3.2.4.1.1		not-accessible
INT proSupportedId	1.3.6.1.4.1.34592.1.3.2.4.1.1.1	INTEGER	not-accessible	Description.
ROW proSupportedRowStatus	1.3.6.1.4.1.34592.1.3.2.4.1.1.3	RowStatus	read-create
proSupportedTable	1.3.6.1.4.1.34592.1.3.2.4.1		not-accessible
proVlanEntry	1.3.6.1.4.1.34592.1.3.2.4.2.1		not-accessible
I32 proVlanId	1.3.6.1.4.1.34592.1.3.2.4.2.1.3	Integer32	read-write
INT proVlanIdx	1.3.6.1.4.1.34592.1.3.2.4.2.1.1	INTEGER	not-accessible	Description.
I32 proVlanProtocol	1.3.6.1.4.1.34592.1.3.2.4.2.1.2	Integer32	read-write	Description.
ROW proVlanRowStatus	1.3.6.1.4.1.34592.1.3.2.4.2.1.4	RowStatus	read-create
proVlanTable	1.3.6.1.4.1.34592.1.3.2.4.2		not-accessible
qVlanCfg	1.3.6.1.4.1.34592.1.3.2.4.4
qVlanEntry	1.3.6.1.4.1.34592.1.3.2.4.3.1		not-accessible	Description.
U32 qVlanId	1.3.6.1.4.1.34592.1.3.2.4.3.1.1	Unsigned32	not-accessible	Description.
ROW qVlanRowStatus	1.3.6.1.4.1.34592.1.3.2.4.3.1.4	RowStatus	read-write	Description.
POR qVlanStaticEgressPorts	1.3.6.1.4.1.34592.1.3.2.4.3.1.2	PortList	read-write	first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16.
POR qVlanStaticUntaggedPorts	1.3.6.1.4.1.34592.1.3.2.4.3.1.3	PortList	read-write	first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16.
qVlanTable	1.3.6.1.4.1.34592.1.3.2.4.3		not-accessible	Description.
I32 resPower	1.3.6.1.4.1.34592.1.3.2.3.1.1.4	Integer32	read-only
MAC rootAddr	1.3.6.1.4.1.34592.1.3.2.6.1.9	MacAddress	read-only
I32 rootPathCost	1.3.6.1.4.1.34592.1.3.2.6.1.10	Integer32	read-only
I32 rootPri	1.3.6.1.4.1.34592.1.3.2.6.1.8	Integer32	read-only
rstp	1.3.6.1.4.1.34592.1.3.2.6
rstpConfig	1.3.6.1.4.1.34592.1.3.2.6.1
INT rstpEdgeConfig	1.3.6.1.4.1.34592.1.3.2.6.2.1.5	INTEGER	read-write
OPE rstpEnable	1.3.6.1.4.1.34592.1.3.2.6.1.1	OperSwitch	read-write
OPE rstpMCheck	1.3.6.1.4.1.34592.1.3.2.6.2.1.4	OperSwitch	read-write
INT rstpMode	1.3.6.1.4.1.34592.1.3.2.6.2.1.1	INTEGER	read-only
INT rstpOperEdge	1.3.6.1.4.1.34592.1.3.2.6.2.1.6	INTEGER	read-only
INT rstpOperP2P	1.3.6.1.4.1.34592.1.3.2.6.2.1.8	INTEGER	read-only
INT rstpP2PCfg	1.3.6.1.4.1.34592.1.3.2.6.2.1.7	INTEGER	read-write
I32 rstpPathCost	1.3.6.1.4.1.34592.1.3.2.6.2.1.3	Integer32	read-write
rstpPortEntry	1.3.6.1.4.1.34592.1.3.2.6.2.1		not-accessible
INT rstpPortState	1.3.6.1.4.1.34592.1.3.2.6.2.1.9	INTEGER	read-only
rstpPortTable	1.3.6.1.4.1.34592.1.3.2.6.2		not-accessible
INT rstpPri	1.3.6.1.4.1.34592.1.3.2.6.2.1.2	INTEGER	read-write
INT sfpModeCfg	1.3.6.1.4.1.34592.1.3.2.3.2.1.3	INTEGER	read-write	this object is only effective when the port is SNI(ge1~ge8)
INT sfpPlugStauts	1.3.6.1.4.1.34592.1.3.2.3.1.1.2	INTEGER	read-only
POR sourceEgressPorts	1.3.6.1.4.1.34592.1.3.2.7.3	PortList	read-write	port bitmap: first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16.
POR sourceIngressPorts	1.3.6.1.4.1.34592.1.3.2.7.2	PortList	read-write	port bitmap: first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16.
OCT sourceVlan	1.3.6.1.4.1.34592.1.3.2.7.4	OCTET STRING	read-write	first 2byte is the number of vlans, maxmun number is 8,format: 2byte 2byte 2byte 2byte ----------------------------------------------- \| vlanNum(N<=8) \| vlan1 \| vlan2 \| ... \| vlanN \| -----------------------------------------------
switchCfgGroup	1.3.6.1.4.1.34592.1.3.2.10.1.2			A connection of objects providing basic switch configuration
switchConfig	1.3.6.1.4.1.34592.1.3.2.1
INT switchMode	1.3.6.1.4.1.34592.1.3.2.1.1	INTEGER	read-write	The work mode of the core switch, now it can work in following three modes: sniDestinated: SNI port is specified,all internal port (connected with OLT LNP port) exchange traffic with the only one specified SNI port, all other SNI port is not in use in this mode. When set to this mode, the ONUs registered on different PON port(OLT) can not communicate each other transparent: Each SNI port corresponding to one PON port, and the port pairs are isolate each other normal: lay2 switch mode
switchPort	1.3.6.1.4.1.34592.1.3.2.3
I32 swPortBroadCastRate	1.3.6.1.4.1.34592.1.3.2.3.2.1.19	Integer32	read-write
OPE swPortBroadCastRateCtl	1.3.6.1.4.1.34592.1.3.2.3.2.1.16	OperSwitch	read-write
INT swPortCfgDup	1.3.6.1.4.1.34592.1.3.2.3.2.1.5	INTEGER	read-write
swPortCfgEntry	1.3.6.1.4.1.34592.1.3.2.3.2.1		not-accessible
INT swPortCfgSpd	1.3.6.1.4.1.34592.1.3.2.3.2.1.4	INTEGER	read-write
swPortCfgTable	1.3.6.1.4.1.34592.1.3.2.3.2		not-accessible
I32 swPortDftPri	1.3.6.1.4.1.34592.1.3.2.3.2.1.8	Integer32	read-write
I32 swPortDftVid	1.3.6.1.4.1.34592.1.3.2.3.2.1.9	Integer32	read-write
OPE swPortEnable	1.3.6.1.4.1.34592.1.3.2.3.2.1.11	OperSwitch	read-write
INT swPortFlowCtl	1.3.6.1.4.1.34592.1.3.2.3.2.1.7	INTEGER	read-write
INT swPortForceLinkDown	1.3.6.1.4.1.34592.1.3.2.3.2.1.10	INTEGER	read-write
SWP swPortId	1.3.6.1.4.1.34592.1.3.2.3.2.1.2	SwPortList	not-accessible
OPE swPortIngressFilter	1.3.6.1.4.1.34592.1.3.2.3.2.1.12	OperSwitch	read-write
INT swPortLinkState	1.3.6.1.4.1.34592.1.3.2.3.1.1.5	INTEGER	read-only
swPortManageGroup	1.3.6.1.4.1.34592.1.3.2.10.1.3			A collection of objects providing switch port configuration management
OPE swPortMultiCastRateCtl	1.3.6.1.4.1.34592.1.3.2.3.2.1.17	OperSwitch	read-write	Description.
OPE swPortNestVlanEnable	1.3.6.1.4.1.34592.1.3.2.3.2.1.14	OperSwitch	read-write
INT swPortPermitFrameType	1.3.6.1.4.1.34592.1.3.2.3.2.1.13	INTEGER	read-write
INT swPortProtStatus	1.3.6.1.4.1.34592.1.3.2.3.1.1.6	INTEGER	read-only
OPE swPortProtVlan	1.3.6.1.4.1.34592.1.3.2.3.2.1.15	OperSwitch	read-write
INT swPortRateCtlMode	1.3.6.1.4.1.34592.1.3.2.3.3	INTEGER	read-write	Description.
INT swPortRstAuto	1.3.6.1.4.1.34592.1.3.2.3.2.1.6	INTEGER	read-write
swPortStatusEntry	1.3.6.1.4.1.34592.1.3.2.3.1.1		not-accessible
swPortStatusTable	1.3.6.1.4.1.34592.1.3.2.3.1		not-accessible
OPE swPortUnkUcCastRateCtl	1.3.6.1.4.1.34592.1.3.2.3.2.1.18	OperSwitch	read-write	Description.
INT swPortWorkDup	1.3.6.1.4.1.34592.1.3.2.3.1.1.8	INTEGER	read-only
INT swPortWorkFlowCtr	1.3.6.1.4.1.34592.1.3.2.3.1.1.9	INTEGER	read-only
INT swPortWorkSpd	1.3.6.1.4.1.34592.1.3.2.3.1.1.7	INTEGER	read-only
swRstpGroup	1.3.6.1.4.1.34592.1.3.2.10.1.6			A collection of objects providing switch rstp configuration managment
SNI swSniPortId	1.3.6.1.4.1.34592.1.3.2.3.1.1.1	SniPortList	not-accessible	Description.
swTrunkGroup	1.3.6.1.4.1.34592.1.3.2.10.1.5			A collection of objects providing switch trunk management
swVlanGroups	1.3.6.1.4.1.34592.1.3.2.10.1.4			A collection of objects providing switch vlan configuration management
I32 transmitHoldCount	1.3.6.1.4.1.34592.1.3.2.6.1.5	Integer32	read-write
I32 trsPower	1.3.6.1.4.1.34592.1.3.2.3.1.1.3	Integer32	read-only
trunk	1.3.6.1.4.1.34592.1.3.2.5
INT trunkBlance	1.3.6.1.4.1.34592.1.3.2.5.1.1	INTEGER	read-write
trunkConfig	1.3.6.1.4.1.34592.1.3.2.5.1
trunkGroupEntry	1.3.6.1.4.1.34592.1.3.2.5.2.1		not-accessible
I32 trunkGroupId	1.3.6.1.4.1.34592.1.3.2.5.2.1.1	Integer32	not-accessible
POR trunkGroupMembers	1.3.6.1.4.1.34592.1.3.2.5.2.1.2	PortList	read-create
ROW trunkGroupRowStatus	1.3.6.1.4.1.34592.1.3.2.5.2.1.3	RowStatus	read-create
trunkGroupTable	1.3.6.1.4.1.34592.1.3.2.5.2		not-accessible
vlan	1.3.6.1.4.1.34592.1.3.2.4
OPE vlanMode	1.3.6.1.4.1.34592.1.3.2.4.4.1	OperSwitch	read-write	vlan mode :enable (vlan aware) or disable (vlan unaware).

RFC description

EPON optical line terminal core switch management MIB with port and configuration control.

Start monitoring C-Data FD-series OLT (integrated Ethernet switch module) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download FD-SWITCH-MIB

What Is FD-SWITCH-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description