EXTREME-SUMMIT-WM-MIB

All MIBs › EXTREME-SUMMIT-WM-MIB

Organization: Extreme Networks, Inc.

Last Updated: 2005-10-28

Category: Domain: Wireless, Technology: Wireless, Vendor: Extreme Networks

Description: Extreme Networks Summit Wireless Manager MIB for centralized WLAN controller management including AP inventory and RF configuration.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EXTREME-SUMMIT-WM-MIB?

EXTREME-SUMMIT-WM-MIB is an Extreme Networks enterprise MIB for the Summit WM (Wireless Manager) product line, a centralized WLAN controller platform that manages fleets of access points (APs). Although the available module description is minimal ("Summit WM MIB definition") and no sample objects were provided, per its short description it exposes AP inventory and RF (radio frequency) configuration data for the wireless management system. Such a controller MIB would typically be used to monitor AP status (online/offline, registered/unregistered) and radio/channel configuration, effectively reporting on the operational health of the wireless infrastructure under the controller's management rather than exposing sensors of the controller itself. It likely relies on general 802.11/WLAN management conventions and Extreme's own enterprise MIB tree, though the specific dependency cannot be confirmed from the sparse data available. It is typically deployed in enterprise or campus wireless networks using Extreme Networks Summit WM wireless controllers to manage groups of thin/lightweight access points. Engineers can download the EXTREME-SUMMIT-WM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EXTREME-SUMMIT-WM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Extreme Networks Summit WM wireless LAN controllers and managed access points

Monitoring Examples

No sample objects were provided for this MIB, so specific table/object names cannot be confirmed; based on the short description, an administrator managing a Summit WM deployment would be expected to poll AP inventory objects to see which access points are registered and online, and RF configuration objects to verify channel and power settings, but the exact object names are not available from the given data.

What Can Be Monitored

access point inventory/registration status
AP online/offline status
RF/channel configuration

Imported Objects

From EXTREME-SUMMIT-WM-SMI

summitWMMgmt	OBJECT-IDENTITY
summitWMModules	OBJECT-IDENTITY

From IEEE802dot11-MIB

WEPKeytype

From IF-MIB

InterfaceIndex
ifIndex	OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using altitudeInUcastPkts OID:

Select an Extreme Networks Summit WM wireless LAN controller and managed access point as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type altitudeInUcastPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of unicast packets from wireless-to-wired network. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
summitWM	1.3.6.1.4.1.1916.5.3.2
systemObjects	1.3.6.1.4.1.1916.5.3.2.1
STR sysSoftwareVersion	1.3.6.1.4.1.1916.5.3.2.1.1	DisplayString	read-only	System software version.
LOG sysLogLevel	1.3.6.1.4.1.1916.5.3.2.1.2	LogEventSeverity	read-write	Sets the level of events which are written to the system log.
OCT sysSerialNo	1.3.6.1.4.1.1916.5.3.2.1.3	OCTET STRING	read-only	System serial number.
sysLogSupport	1.3.6.1.4.1.1916.5.3.2.1.4
INT summitWMAppLogFacility	1.3.6.1.4.1.1916.5.3.2.1.4.1	INTEGER	read-write	The application log facility level for syslog.
INT serviceLogFacility	1.3.6.1.4.1.1916.5.3.2.1.4.2	INTEGER	read-write	The service log facility level for syslog.
T/F includeAllServiceMessages	1.3.6.1.4.1.1916.5.3.2.1.4.3	TruthValue	read-write	Indicates if DHCP messages should also be forwarded to syslog.
sysLogServersTable	1.3.6.1.4.1.1916.5.3.2.1.4.4		not-accessible	Table of syslog servers to forward logging messages.
sysLogServersEntry	1.3.6.1.4.1.1916.5.3.2.1.4.4.1		not-accessible	Configuration information for an external syslog server.
I32 sysLogServerIndex	1.3.6.1.4.1.1916.5.3.2.1.4.4.1.1	Integer32	read-write	Table index for the syslog server.
T/F sysLogServerEnabled	1.3.6.1.4.1.1916.5.3.2.1.4.4.1.2	TruthValue	read-write	Indicates if messages are to be sent to the syslog server.
IP sysLogServerIP	1.3.6.1.4.1.1916.5.3.2.1.4.4.1.3	IpAddress	read-write	syslog server IP address.
I32 sysLogServerPort	1.3.6.1.4.1.1916.5.3.2.1.4.4.1.4	Integer32	read-write	syslog server port number.
ROW sysLogServerRowStatus	1.3.6.1.4.1.1916.5.3.2.1.4.4.1.5	RowStatus	read-write	RowStatus for operating on syslogServersTable.
mgmtPortObjects	1.3.6.1.4.1.1916.5.3.2.3
I32 mgmtPortIfIndex	1.3.6.1.4.1.1916.5.3.2.3.1	Integer32	read-only	ifIndex of the management port.
STR mgmtPortHostname	1.3.6.1.4.1.1916.5.3.2.3.2	DisplayString	read-write	Hostname of the management port.
IP mgmtPortPrimaryDNS	1.3.6.1.4.1.1916.5.3.2.3.3	IpAddress	read-write	Primary domain server for the management port.
IP mgmtPortSecondaryDNS	1.3.6.1.4.1.1916.5.3.2.3.4	IpAddress	read-write	Secondary domain server for the management port.
STR mgmtPortDomain	1.3.6.1.4.1.1916.5.3.2.3.5	DisplayString	read-write	Domain of the management port.
physicalPortObjects	1.3.6.1.4.1.1916.5.3.2.4
I32 physicalPortCount	1.3.6.1.4.1.1916.5.3.2.4.1	Integer32	read-only	Number of rows in routerPortsTable.
physicalPortsTable	1.3.6.1.4.1.1916.5.3.2.4.2		not-accessible	Table of router ports on the controller.
physicalPortsEntry	1.3.6.1.4.1.1916.5.3.2.4.2.1		not-accessible	An entry in routerPortsTable.
T/F portMgmtTrafficEnable	1.3.6.1.4.1.1916.5.3.2.4.2.1.1	TruthValue	read-write	Determines whether controller management network traffic is allowed over this interface.
INT portDuplexMode	1.3.6.1.4.1.1916.5.3.2.4.2.1.2	INTEGER	read-write	Duplex mode for the esa ports.
INT portFunction	1.3.6.1.4.1.1916.5.3.2.4.2.1.3	INTEGER	read-write	Specifies the behavior of the WM physical ports.
adManagerObjects	1.3.6.1.4.1.1916.5.3.2.5
INT adRole	1.3.6.1.4.1.1916.5.3.2.5.1	INTEGER	read-write	Specifies the role of this WM in inter-WM mobility. None indicates that mobile units cannot roam to or from this WM. In any WM cluster, only one WM should be specified as adMgr, all others should be have adRole = adAgent .
I32 adIfIndex	1.3.6.1.4.1.1916.5.3.2.5.2	Integer32	read-write	ifIndex of the physical port where inter-WM tunnels terminate.
I32 adHeartBeatInterval	1.3.6.1.4.1.1916.5.3.2.5.3	Integer32	read-write	The time interval between inter-WM polling messages.
ntpObjects	1.3.6.1.4.1.1916.5.3.2.6
T/F ntpEnabled	1.3.6.1.4.1.1916.5.3.2.6.1	TruthValue	read-write	Enable or disables support for the Network Time Protocol (NTP).
STR ntpTimezone	1.3.6.1.4.1.1916.5.3.2.6.2	DisplayString	read-write	Specifies the time zone where this WM resides.
STR ntpTimeServer1	1.3.6.1.4.1.1916.5.3.2.6.3	DisplayString	read-write	Primary NTP server.
STR ntpTimeServer2	1.3.6.1.4.1.1916.5.3.2.6.4	DisplayString	read-write	Secondary NTP server.
STR ntpTimeServer3	1.3.6.1.4.1.1916.5.3.2.6.5	DisplayString	read-write	Tertiary NTP server.
controllerStats	1.3.6.1.4.1.1916.5.3.2.7
I32 tunnelCount	1.3.6.1.4.1.1916.5.3.2.7.6	Integer32	read-only	Number of connections to other summitWM controllers.
tunnelStatsTable	1.3.6.1.4.1.1916.5.3.2.7.7		not-accessible	tunnelStatsTable contains a list of the IP tunnels connected to this WM for use in inter-WM mobility.
tunnelStatsEntry	1.3.6.1.4.1.1916.5.3.2.7.7.1		not-accessible	Statistics for a mobility tunnel.
IP tunnelStartIP	1.3.6.1.4.1.1916.5.3.2.7.7.1.1	IpAddress	read-write	IP address for the start of the tunnel.
OCT tunnelStartWM	1.3.6.1.4.1.1916.5.3.2.7.7.1.2	OCTET STRING	read-write	Name of the access controller for the start of the tunnel.
IP tunnelEndIP	1.3.6.1.4.1.1916.5.3.2.7.7.1.3	IpAddress	read-write	IP address for the end of the tunnel.
OCT tunnelEndWM	1.3.6.1.4.1.1916.5.3.2.7.7.1.4	OCTET STRING	read-write	Name of the access controller for the end of the tunnel.
INT tunnelStatus	1.3.6.1.4.1.1916.5.3.2.7.7.1.5	INTEGER	read-write	Indicates if the mobility tunnel is up or down.
accessDomains	1.3.6.1.4.1.1916.5.3.3
wmadConfigObjects	1.3.6.1.4.1.1916.5.3.3.1
I32 wmadCount	1.3.6.1.4.1.1916.5.3.3.1.1	Integer32	read-only	Number of WMADs defined in wmadConfigTable.
wmadConfigTable	1.3.6.1.4.1.1916.5.3.3.1.2		not-accessible	Contains definitions of the Access Domain Segments defined on this SummitWM.
wmadConfigEntry	1.3.6.1.4.1.1916.5.3.3.1.2.1		not-accessible	Configuration elements for a specific Access Domain Segment.
STR wmadDescription	1.3.6.1.4.1.1916.5.3.3.1.2.1.1	DisplayString	read-write	Textual description of the WMAD.
INT wmadAssignmentMode	1.3.6.1.4.1.1916.5.3.3.1.2.1.2	INTEGER	read-write	Determines the method by which mobile units are assigned an address within this WMAD. If wmadAssignmentMode = ssid, any client with an SSID matching the WMAD will be assigned an address from this WMAD. If wmadAssignmentMode == aaa, then address assignment is not completed until after the user is authenticated.
I32 wmadMUSessionTimeout	1.3.6.1.4.1.1916.5.3.3.1.2.1.3	Integer32	read-write	Client session idle time out, in seconds.
T/F wmadAllowMulticast	1.3.6.1.4.1.1916.5.3.3.1.2.1.4	TruthValue	read-write	When true, allows IP multicast packets to be broadcast to the clients on this WMAD.
STR wmadSSID	1.3.6.1.4.1.1916.5.3.3.1.2.1.5	DisplayString	read-write	Service Set Identifier (i.e. Network Name) that will be configured on the Altitudes associated with this WMAD.
STR wmadDomain	1.3.6.1.4.1.1916.5.3.3.1.2.1.6	DisplayString	read-write	Domain name to be supplied to the wireless clients if internal DHCP address assignment.
STR wmadDNSServers	1.3.6.1.4.1.1916.5.3.3.1.2.1.7	DisplayString	read-write	List of DNSs to be supplied to the wireless clients if internal DHCP address assignment.
STR wmadWINSServers	1.3.6.1.4.1.1916.5.3.3.1.2.1.8	DisplayString	read-write	List of WINSs to be supplied to the wireless clients if internal DHCP address assignment.
INT wmadAuthModel	1.3.6.1.4.1.1916.5.3.3.1.2.1.9	INTEGER	read-write	wmadAuthModel specifies the authentication method used for clients in the WMAD. None indicates that the WMAD is open, and no authentication is required. wmadAuthModel=captivePortal may only be specified for a WMAD with wmadAssignmentMode=ssid. Likewise, wmadAuthModel=dot1X may only be specified for a WMAD with wmadAssignmentMode=aaa.
I32 wmadParentIfIndex	1.3.6.1.4.1.1916.5.3.3.1.2.1.10	Integer32	read-write	Specifies the ifIndex of the parent WMAD, if this WMAD is a child. This only applies for a WMAD where wmadAssignmentMode=aaa. If this is a top level WMAD, wmadParentIfIndex will return null or 0.
T/F wmadMgmtTrafficEnable	1.3.6.1.4.1.1916.5.3.3.1.2.1.11	TruthValue	read-write	Specifies whether clients in the WMAD have access to WM management elements.
T/F wmadUseDHCPRelay	1.3.6.1.4.1.1916.5.3.3.1.2.1.12	TruthValue	read-write	When true, specifies that DHCP Relay is enabled on the WMAD.
T/F wmad3rdPartyAP	1.3.6.1.4.1.1916.5.3.3.1.2.1.13	TruthValue	read-write	When true, specifies that the WMAD contains 3rd party access points. Only one such WMAD may be defined for a summitWM.
ROW wmadStatus	1.3.6.1.4.1.1916.5.3.3.1.2.1.14	RowStatus	read-write	RowStatus variable for performing row operations on wmadConfigTable.
wmadDHCPRangeTable	1.3.6.1.4.1.1916.5.3.3.1.3		not-accessible	wmadDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this WMAD.
wmadDHCPRangeEntry	1.3.6.1.4.1.1916.5.3.3.1.3.1		not-accessible	Configuration information for a DHCP range.
I32 wmadDHCPRangeIndex	1.3.6.1.4.1.1916.5.3.3.1.3.1.1	Integer32	read-write	Index for the DHCP row element.
IP wmadDHCPRangeStart	1.3.6.1.4.1.1916.5.3.3.1.3.1.2	IpAddress	read-write	First IP address in the range.
IP wmadDHCPRangeEnd	1.3.6.1.4.1.1916.5.3.3.1.3.1.3	IpAddress	read-write	Last IP address in the range.
INT wmadDHCPRangeType	1.3.6.1.4.1.1916.5.3.3.1.3.1.4	INTEGER	read-write	Determines whether addresses in the specified range will be included, or excluded by the DHCP server.
ROW wmadDHCPRangeStatus	1.3.6.1.4.1.1916.5.3.3.1.3.1.5	RowStatus	read-write	Row status variable for row operations on the wmadDHCPRangeTable
wmadCaptivePortalTable	1.3.6.1.4.1.1916.5.3.3.1.4		not-accessible	Details of the Captive Portal login page for WMADs that have wmadAssignment=ssid and wmadAuthModel=captivePortal.
wmadCaptivePortalEntry	1.3.6.1.4.1.1916.5.3.3.1.4.1		not-accessible	Captive Portal Information for the WMAD.
STR cpURL	1.3.6.1.4.1.1916.5.3.3.1.4.1.1	DisplayString	read-write	Redirect URL of the Captive Portal login page.
STR cpLoginLabel	1.3.6.1.4.1.1916.5.3.3.1.4.1.2	DisplayString	read-write	Label that appears in front of the login field on the Captive Portal login page.
STR cpPasswordLabel	1.3.6.1.4.1.1916.5.3.3.1.4.1.3	DisplayString	read-write	Label that appears in front of the password field on the Captive Portal login page.
STR cpHeaderURL	1.3.6.1.4.1.1916.5.3.3.1.4.1.4	DisplayString	read-write	URL of the Captive Portal header.
STR cpFooterURL	1.3.6.1.4.1.1916.5.3.3.1.4.1.5	DisplayString	read-write	URL of the Captive Portal footer.
STR cpMessage	1.3.6.1.4.1.1916.5.3.3.1.4.1.6	DisplayString	read-write	A welcome message, or set of instructions that is to appear on the Captive Portal login page.
wmadRadiusServerTable	1.3.6.1.4.1.1916.5.3.3.1.5		not-accessible	List of RADIUS servers to be utilized for authentication in the WMAD.
wmadRadiusServerEntry	1.3.6.1.4.1.1916.5.3.3.1.5.1		not-accessible	Configuration information for a RADIUS server.
IP wmadRadiusServerIP	1.3.6.1.4.1.1916.5.3.3.1.5.1.1	IpAddress	read-write	IP address of the RADIUS server.
I32 wmadRadiusServerPort	1.3.6.1.4.1.1916.5.3.3.1.5.1.2	Integer32	read-write	Port number for the RADIUS server.
I32 wmadRadiusServerRetries	1.3.6.1.4.1.1916.5.3.3.1.5.1.3	Integer32	read-write	Number of retries for a RADIUS authentication request.
I32 wmadRadiusServerTimeout	1.3.6.1.4.1.1916.5.3.3.1.5.1.4	Integer32	read-write	Delay between requests.
STR wmadRadiusServerSharedSecret	1.3.6.1.4.1.1916.5.3.3.1.5.1.5	DisplayString	read-write	Shared secret to be used between the NAS and RADIUS server.
STR wmadRadiusServerNASIdentifier	1.3.6.1.4.1.1916.5.3.3.1.5.1.6	DisplayString	read-write	NAS identifier to be include in RADIUS request.
INT wmadRadiusServerAuthType	1.3.6.1.4.1.1916.5.3.3.1.5.1.7	INTEGER	read-write	Challenge mechanism for the request.
ROW wmadRadiusServerRowStatus	1.3.6.1.4.1.1916.5.3.3.1.5.1.8	RowStatus	read-write	RowStatus value for manipulating wmadRADIUSServerTable.
wmadFilterIDTable	1.3.6.1.4.1.1916.5.3.3.1.6		not-accessible	Table of names filters for a WMAD.
wmadFilterIDEntry	1.3.6.1.4.1.1916.5.3.3.1.6.1		not-accessible	Name of a specific filter in the WMAD.
STR wmadFilterID	1.3.6.1.4.1.1916.5.3.3.1.6.1.1	DisplayString	read-write	Filter names.
ROW wmadFilterIDStatus	1.3.6.1.4.1.1916.5.3.3.1.6.1.2	RowStatus	read-write	RowStatus for operating on wmadFilterIDTable.
wmadFilterRuleTable	1.3.6.1.4.1.1916.5.3.3.1.7		not-accessible	Table containing specific filters for a named filter.
wmadFilterRuleEntry	1.3.6.1.4.1.1916.5.3.3.1.7.1		not-accessible	Filter elements for an individual WMAD filter.
I32 wmadFilterRuleOrder	1.3.6.1.4.1.1916.5.3.3.1.7.1.1	Integer32	read-write	Position of the filter in the filter list.
INT wmadFilterRuleDirection	1.3.6.1.4.1.1916.5.3.3.1.7.1.2	INTEGER	read-write	Traffic direction to apply the rule.
INT wmadFilterRuleAction	1.3.6.1.4.1.1916.5.3.3.1.7.1.3	INTEGER	read-write	Allow or deny traffic for the filter.
IP wmadFilterRuleIPAddress	1.3.6.1.4.1.1916.5.3.3.1.7.1.4	IpAddress	read-write	IP address to apply the filter.
I32 wmadFilterRulePortLow	1.3.6.1.4.1.1916.5.3.3.1.7.1.5	Integer32	read-write	Low port number for the filter.
I32 wmadFilterRulePortHigh	1.3.6.1.4.1.1916.5.3.3.1.7.1.6	Integer32	read-write	High port number for the filter.
INT wmadFilterRuleProtocol	1.3.6.1.4.1.1916.5.3.3.1.7.1.7	INTEGER	read-write	Specific protocol to filter.
INT wmadFilterRuleEtherType	1.3.6.1.4.1.1916.5.3.3.1.7.1.8	INTEGER	read-write	Specific ethertype to filter.
ROW wmadFilterRuleStatus	1.3.6.1.4.1.1916.5.3.3.1.7.1.9	RowStatus	read-write	RowStatus value for the wmadFilterRuleTable.
wmadPrivacyTable	1.3.6.1.4.1.1916.5.3.3.1.8		not-accessible	Table of privacy settings for the WMAD.
wmadPrivacyEntry	1.3.6.1.4.1.1916.5.3.3.1.8.1		not-accessible	Configuration values for a specific privacy setting.
INT wmadPrivWEPKeyType	1.3.6.1.4.1.1916.5.3.3.1.8.1.1	INTEGER	read-write	Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA.
I32 wmadPrivDynamicRekeyFrequency	1.3.6.1.4.1.1916.5.3.3.1.8.1.2	Integer32	read-write	Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if wmadPrivWEPKeyType == dynamic. For any other values of wmadPrivWEPKeyType, reading or setting this value will return an unsuccessful status and will return a value of null or zero.
I32 wmadPrivWEPKeyLength	1.3.6.1.4.1.1916.5.3.3.1.8.1.3	Integer32	read-write	WEP key length, either 40 or 104 bit. If wmadPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of null or zero.
T/F wmadPrivWPA1Enabled	1.3.6.1.4.1.1916.5.3.3.1.8.1.4	TruthValue	read-write	Enables WPA.1 (Wi-Fi Protected Access).
T/F wmadPrivUseSharedKey	1.3.6.1.4.1.1916.5.3.3.1.8.1.5	TruthValue	read-write	Enables the use of WPA shared key for this WMAD.
STR wmadPrivWPASharedKey	1.3.6.1.4.1.1916.5.3.3.1.8.1.6	DisplayString	read-write	The value of the WPA shared key for this WMAD. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
T/F wmadPrivWPA2Enabled	1.3.6.1.4.1.1916.5.3.3.1.8.1.7	TruthValue	read-write	When true, WPA v.2 support is enabled.
wmadWEPKeyTable	1.3.6.1.4.1.1916.5.3.3.1.9		not-accessible	Table of WEP key entries for a static WEP definition.
wmadWEPKeyEntry	1.3.6.1.4.1.1916.5.3.3.1.9.1		not-accessible	WEP key for a single entry in the table.
I32 wmadWEPKeyIndex	1.3.6.1.4.1.1916.5.3.3.1.9.1.1	Integer32	read-write	Table index for the WEP key.
WEP wmadWEPKeyValue	1.3.6.1.4.1.1916.5.3.3.1.9.1.2	WEPKeytype	read-write	Value of a WEP key for this WMAD. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
wmad3rdPartyAPTable	1.3.6.1.4.1.1916.5.3.3.1.10		not-accessible	Contains a list of 3rd Party access points for the WM.
wmad3rdPartyAPEntry	1.3.6.1.4.1.1916.5.3.3.1.10.1		not-accessible	Configuration information for a 3rd party access point.
MAC apMacAddress	1.3.6.1.4.1.1916.5.3.3.1.10.1.1	MacAddress	read-write	Ethernet MAC address of the 3rd party access point.
IP apIpAddress	1.3.6.1.4.1.1916.5.3.3.1.10.1.2	IpAddress	read-write	IP address of the 3rd party access point.
wmadStatsObjects	1.3.6.1.4.1.1916.5.3.3.2
I32 activeWMADSessionCount	1.3.6.1.4.1.1916.5.3.3.2.1	Integer32	read-write	Number of active WMADs.
altitude	1.3.6.1.4.1.1916.5.3.5
altitudeConfigObjects	1.3.6.1.4.1.1916.5.3.5.1
I32 altitudeCount	1.3.6.1.4.1.1916.5.3.5.1.1	Integer32	read-only	The count of currently configured Altitudes associated with this summitWM.
altitudeTable	1.3.6.1.4.1.1916.5.3.5.1.2		not-accessible	Contains a list of all configured Altitudes associated with the summitWM.
altitudeEntry	1.3.6.1.4.1.1916.5.3.5.1.2.1		not-accessible	Configuration information for an access point.
I32 altitudeIndex	1.3.6.1.4.1.1916.5.3.5.1.2.1.1	Integer32	read-write	Table index for the access point.
STR altitudeName	1.3.6.1.4.1.1916.5.3.5.1.2.1.2	DisplayString	read-write	Altitude's name.
STR altitudeDesc	1.3.6.1.4.1.1916.5.3.5.1.2.1.3	DisplayString	read-write	Text description of the Altitude.
OCT altitudeSerialNumber	1.3.6.1.4.1.1916.5.3.5.1.2.1.4	OCTET STRING	read-only	16-character serial number of the Altitude.
NUM altitudePortifIndex	1.3.6.1.4.1.1916.5.3.5.1.2.1.5	InterfaceIndex	read-write	ifIndex of the physical port to which this Altitude is assigned.
NUM altitudeWiredIfIndex	1.3.6.1.4.1.1916.5.3.5.1.2.1.6	InterfaceIndex	read-write	ifIndex of the wired interface on the Altitude.
OCT altitudeSoftwareVersion	1.3.6.1.4.1.1916.5.3.5.1.2.1.7	OCTET STRING	read-only	Software version currently installed on the Altitude.
OID altitudeSpecific	1.3.6.1.4.1.1916.5.3.5.1.2.1.8	OBJECT IDENTIFIER	read-only	A link back to the OID under the summitWMProducts branch that identifies the specific version of this Altitude.
T/F altitudeBroadcastDisassociate	1.3.6.1.4.1.1916.5.3.5.1.2.1.9	TruthValue	read-write	True indicates that the Altitude should broadcast disassociation requests, False indicates unicast.
ROW altitudeRowStatus	1.3.6.1.4.1.1916.5.3.5.1.2.1.10	RowStatus	read-write	RowStatus for the altitudeTable.
altitudeRadioTable	1.3.6.1.4.1.1916.5.3.5.1.3		not-accessible	Table access point radio configuration information.
altitudeRadioEntry	1.3.6.1.4.1.1916.5.3.5.1.3.1		not-accessible	Configuration information for a radio on the access point.
INT altitudeRadioFrequency	1.3.6.1.4.1.1916.5.3.5.1.3.1.1	INTEGER	read-only	Indicates the type of radio (a or b/g).
radioWMADTable	1.3.6.1.4.1.1916.5.3.5.1.4		not-accessible	Table of WMADs the radio is participating in.
radioWMADEntry	1.3.6.1.4.1.1916.5.3.5.1.4.1		not-accessible	Information for a single WMAD entry.
NUM radioIfIndex	1.3.6.1.4.1.1916.5.3.5.1.4.1.1	InterfaceIndex	read-write	Radio participating in the WMAD.
NUM wmadIfIndex	1.3.6.1.4.1.1916.5.3.5.1.4.1.2	InterfaceIndex	read-write	ifIndex for the WMAD the radio is participating.
ROW radioWMADRowStatus	1.3.6.1.4.1.1916.5.3.5.1.4.1.3	RowStatus	read-write	RowStatus for the radioWMADTable.
altitudeStatsObjects	1.3.6.1.4.1.1916.5.3.5.2
I32 altitudeActiveCount	1.3.6.1.4.1.1916.5.3.5.2.1	Integer32	read-only	The count of active Altitude associated with this summitWM.
altitudeStatsTable	1.3.6.1.4.1.1916.5.3.5.2.2		not-accessible	Table of statistics for the access points.
altitudeStatsEntry	1.3.6.1.4.1.1916.5.3.5.2.2.1		not-accessible	Statistics for an access point.
C64 altitudeInUcastPktsEx	1.3.6.1.4.1.1916.5.3.5.2.2.1.1	Counter64	read-only	Number of unicast packets from wireless-to-wired network.
C64 altitudeInNUcastPkts	1.3.6.1.4.1.1916.5.3.5.2.2.1.2	Counter64	read-only	Number of non-unicast packets from wireless-to-wired network.
C64 altitudeInOctets	1.3.6.1.4.1.1916.5.3.5.2.2.1.3	Counter64	read-only	Number of octets from wireless-to-wired network.
C64 altitudeInErrors	1.3.6.1.4.1.1916.5.3.5.2.2.1.4	Counter64	read-only	Number of error packets from wireless-to-wired network.
C64 altitudeInDiscards	1.3.6.1.4.1.1916.5.3.5.2.2.1.5	Counter64	read-only	Number of discarded packets from wireless-to-wired network.
C64 altitudeOutUcastPkts	1.3.6.1.4.1.1916.5.3.5.2.2.1.6	Counter64	read-only	Number of unicast packets from wired-to-wireless network.
C64 altitudeOutNUcastPkts	1.3.6.1.4.1.1916.5.3.5.2.2.1.7	Counter64	read-only	Number of non-unicast packets from wired-to-wireless network.
C64 altitudeOutOctets	1.3.6.1.4.1.1916.5.3.5.2.2.1.8	Counter64	read-only	Number of octets from wired-to-wireless network.
C64 altitudeOutErrors	1.3.6.1.4.1.1916.5.3.5.2.2.1.9	Counter64	read-only	Number of error packets from wired-to-wireless network.
C64 altitudeOutDiscards	1.3.6.1.4.1.1916.5.3.5.2.2.1.10	Counter64	read-only	Number of discarded packets from wired-to-wireless network.
TIK altitudeUpTime	1.3.6.1.4.1.1916.5.3.5.2.2.1.11	TimeTicks	read-only	Description.
mobileUnits	1.3.6.1.4.1.1916.5.3.6
I32 mobileUnitCount	1.3.6.1.4.1.1916.5.3.6.1	Integer32	read-write	Number of clients associated with the access point.
muTable	1.3.6.1.4.1.1916.5.3.6.2		not-accessible	Table of information for clients associated with the WM.
muEntry	1.3.6.1.4.1.1916.5.3.6.2.1		not-accessible	Information for a client associated with the WM.
MAC muMACAddress	1.3.6.1.4.1.1916.5.3.6.2.1.1	MacAddress	read-only	Client MAC address.
IP muIPAddress	1.3.6.1.4.1.1916.5.3.6.2.1.2	IpAddress	read-only	Client IP Address.
OCT muUser	1.3.6.1.4.1.1916.5.3.6.2.1.3	OCTET STRING	read-only	Client login name.
T/F muState	1.3.6.1.4.1.1916.5.3.6.2.1.4	TruthValue	read-only	True if the client is authenticated.
OCT muAltitudeSerialNo	1.3.6.1.4.1.1916.5.3.6.2.1.5	OCTET STRING	read-only	Serial Number of the Altitude the client is associated with.
OCT muWmadSSID	1.3.6.1.4.1.1916.5.3.6.2.1.6	OCTET STRING	read-only	SSID of the WMAD the client is associated with.
C64 muTxPackets	1.3.6.1.4.1.1916.5.3.6.2.1.7	Counter64	read-only	Number of packets trasmitted to the client.
C64 muRxPackets	1.3.6.1.4.1.1916.5.3.6.2.1.8	Counter64	read-only	Number of packets received from the client.
C64 muTxOctets	1.3.6.1.4.1.1916.5.3.6.2.1.9	Counter64	read-only	Number of octets transmitted to the client.
C64 muRxOctets	1.3.6.1.4.1.1916.5.3.6.2.1.10	Counter64	read-only	Number of octets received from the client.
C64 muDuration	1.3.6.1.4.1.1916.5.3.6.2.1.11	Counter64	read-only	Time client has been associated with the WM.
associations	1.3.6.1.4.1.1916.5.3.7
I32 assocCount	1.3.6.1.4.1.1916.5.3.7.1	Integer32	read-write	Total number of current client associations to the access point.
assocTable	1.3.6.1.4.1.1916.5.3.7.2		not-accessible	Table of information about clients associated with the access point.
assocEntry	1.3.6.1.4.1.1916.5.3.7.2.1		not-accessible	Information for a single client in the association table.
MAC assocMUMacAddress	1.3.6.1.4.1.1916.5.3.7.2.1.1	MacAddress	read-only	MAC address of the client.
TIK assocStartSysUpTime	1.3.6.1.4.1.1916.5.3.7.2.1.2	TimeTicks	read-only	How long the client has been associated to the access point.
C64 assocTxPackets	1.3.6.1.4.1.1916.5.3.7.2.1.3	Counter64	read-only	Nubmer of tx packets to the client.
C64 assocRxPackets	1.3.6.1.4.1.1916.5.3.7.2.1.4	Counter64	read-only	Number of received packets from the client.
C64 assocTxOctets	1.3.6.1.4.1.1916.5.3.7.2.1.5	Counter64	read-only	Number of octets sent to the client.
C64 assocRxOctets	1.3.6.1.4.1.1916.5.3.7.2.1.6	Counter64	read-only	Number of octets received from the client.
I32 assocDuration	1.3.6.1.4.1.1916.5.3.7.2.1.7	Integer32	read-write	Length of time since last association.
NUM assocWmadIfIndex	1.3.6.1.4.1.1916.5.3.7.2.1.8	InterfaceIndex	read-only	Index of WMAD to which the MU is associated with.
protocols	1.3.6.1.4.1.1916.5.3.8
wmadc	1.3.6.1.4.1.1916.5.3.8.1
logNotifications	1.3.6.1.4.1.1916.5.3.9
LOG logEventSeverityThreshold	1.3.6.1.4.1.1916.5.3.9.1	LogEventSeverity	read-write	Specifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for critical and major log events. Setting the threshold to minor will trap critical, major, and minor events.
LOG logEventSeverity	1.3.6.1.4.1.1916.5.3.9.3	LogEventSeverity	read-only	Contains the severity of the most recently trapped summitWMLogAlarm notification.
OCT logEventComponent	1.3.6.1.4.1.1916.5.3.9.4	OCTET STRING	read-write	Contains the component which sent the most recently trapped summitWMLogAlarm notification.
OCT logEventDescription	1.3.6.1.4.1.1916.5.3.9.5	OCTET STRING	read-only	Contains the description of the most recently trapped summitWMLogAlarm.
NTF summitWMLogAlarm	1.3.6.1.4.1.1916.5.3.9.6			Components of an alarm.
altitudeNotifications	1.3.6.1.4.1.1916.5.3.19
INT altitudeEventId	1.3.6.1.4.1.1916.5.3.19.1	INTEGER	read-write	Identifies event associated with Altitude or Altitude tunnel: altitudePollTimeout - an event triggered when Altitude disconnects from WM
OCT altitudeEventDescription	1.3.6.1.4.1.1916.5.3.19.2	OCTET STRING	read-only	Contains the description of the most recently triggered event.
OCT altitudeEventSerialNumber	1.3.6.1.4.1.1916.5.3.19.3	OCTET STRING	read-only	16-character serial number of the Altitude.
NTF altitudeTunnelAlarm	1.3.6.1.4.1.1916.5.3.19.4			alarm associated with Altitude and Altitude interface.
summitWMConformance	1.3.6.1.4.1.1916.5.3.30
summitWMModule	1.3.6.1.4.1.1916.5.3.30.1			Conformance definition for the WM MIB.
summitWMGroup	1.3.6.1.4.1.1916.5.3.30.2			Conformance groups.
summitWMAlarms	1.3.6.1.4.1.1916.5.3.30.3			Conformance information for the alarm groups.
summitWMMIB	1.3.6.1.4.1.1916.5.5.2			Summit WM MIB definition

RFC description

Extreme Networks Summit platform vendor-private MIB for wireless management (WM) on Extreme wireless controller and access point devices.

Start monitoring Extreme Networks Summit WM wireless LAN controller and managed access points with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EXTREME-SUMMIT-WM-MIB