All MIBs › EXCEL-SWITCH-MIB
Organization: Excel Switching Corporation
Last Updated: 000118
Category: Device Management, Technology: Switching/L2, Vendor: Allied Telesis
Description: Manages Excel series Ethernet switch configuration, port status, and VLAN assignments.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is EXCEL-SWITCH-MIB?
EXCEL-SWITCH-MIB is a vendor MIB, under the Lucent enterprise branch, for the Excel series of Ethernet/telephony switching platforms, exposing management objects for node identification, timing, and physical/logical card inventory. It provides node-level configuration data (node identifiers, location identifiers, current node time) and per-card hardware inventory through tables like excelNodeTable and excelCommCardTable, covering communication card presence and identity. It supports monitoring of hardware status by tracking node identity/location and per-slot communication card entries, letting an operator confirm expected cards are present and correctly identified in a chassis. It defines its own trap subtree (excelTraps) for fault notifications and sits under the Lucent enterprise OID tree rather than depending on other standard MIBs. It is typically deployed on legacy Lucent/Excel switch-style network elements in telecom central-office or enterprise environments. Engineers can download the EXCEL-SWITCH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in EXCEL-SWITCH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Lucent Excel-series Ethernet/telephony switch
Monitoring Examples
An administrator would walk excelNodeTable/excelNodeEntry (indexed by excelNodeIndex) to read excelNodeLogicalID and excelNodePhysicalID for each configured node, confirming node identity matches the deployed hardware. Polling excelCommCardTable/excelCommCardEntry reveals which communication cards are installed and their identifiers, similar to a slot-inventory check. An unexpected absence of a card entry, or a mismatch involving excelNodeCurrentTime, would indicate a hardware or synchronization fault, with excelTraps firing to alert on such changes.
What Can Be Monitored
- node identifier/location
- node current time
- communication card inventory
- node logical/physical ID
- switch trap events
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| IpAddress | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| ObjectName | |
| snmpModules |
From SNMPv2-TC
| RowStatus | |
| TestAndIncr | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using excelSpanBipolarViolation OID:
Select a Lucent Excel-series Ethernet/telephony switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type excelSpanBipolarViolation into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Bipolar Violations that have occurred on this span since the span became active or since the last request. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| lucent | 1.3.6.1.4.1.1751 | |||
| products | 1.3.6.1.4.1.1751.1 | |||
| excel | 1.3.6.1.4.1.1751.1.67 | The MIB module for entities implementing the xxxx protocol. | ||
| excelTraps | 1.3.6.1.4.1.1751.1.67.0 | |||
| NTF excelCardUpTrap | 1.3.6.1.4.1.1751.1.67.0.1 | This trap is sent when a card is recognized by the matrix for the first time. | ||
| NTF excelCardDownTrap | 1.3.6.1.4.1.1751.1.67.0.2 | This trap is sent when a card goes out of service, is removed or for some reason is no longer recognized by the matrix. | ||
| NTF excelCardActiveTrap | 1.3.6.1.4.1.1751.1.67.0.3 | This trap is sent after a switchover has occured from the standby to active card. excelDeviceCardSlotIndex will indicate the slot of the new active card. | ||
| NTF excelFaultLoggedTrap | 1.3.6.1.4.1.1751.1.67.0.4 | This trap is sent when a fault has occurred on a card. The slot number of the card on which a fault occurred is bound to the trap. | ||
| NTF excelRingUpTrap | 1.3.6.1.4.1.1751.1.67.0.5 | This trap is sent when an Exnet ring comes up. | ||
| NTF excelRingDownTrap | 1.3.6.1.4.1.1751.1.67.0.6 | This trap is sent when an Exnet ring goes down. | ||
| NTF excelSystemBusyTrap | 1.3.6.1.4.1.1751.1.67.0.7 | If the system is in a Busy Condition, then the matrix EX/CPU is flooded with messages. All incoming calls will be ignored until the alarm is cleared. | ||
| NTF excelSystemBusyWarningTrap | 1.3.6.1.4.1.1751.1.67.0.8 | System Busy Warning state. | ||
| NTF excelSystemBusyClearedTrap | 1.3.6.1.4.1.1751.1.67.0.9 | The System Busy condition on the switch has cleared. | ||
| NTF excelClockModeChangeTrap | 1.3.6.1.4.1.1751.1.67.0.10 | This trap occurs when the clock mode was automatically switched or reference clock sources have been lost. The switch will automatically switch the clock mode to the next available clock source. | ||
| NTF excelDSPResourceBlockTrap | 1.3.6.1.4.1.1751.1.67.0.11 | This trap is sent when a DSP resource Block has occurred. | ||
| NTF excelDSPFuncNotCfgTrap | 1.3.6.1.4.1.1751.1.67.0.12 | DSP Resource Function type not configured. | ||
| NTF excelDSPMgmtInconsistentTrap | 1.3.6.1.4.1.1751.1.67.0.13 | DSP resource management inconsistent. | ||
| NTF excelDldTimeoutTrap | 1.3.6.1.4.1.1751.1.67.0.14 | Download record timeout. | ||
| NTF excelRANUnAvailableTrap | 1.3.6.1.4.1.1751.1.67.0.15 | Recorded announcement requested is no longer available in the system. | ||
| NTF excelResourceUtilThreshTrap | 1.3.6.1.4.1.1751.1.67.0.16 | Resource Utilization Threshold Reached. | ||
| NTF excelCardNotSuppTrap | 1.3.6.1.4.1.1751.1.67.0.17 | Card type not supported. | ||
| NTF excelCardDldCorruptTrap | 1.3.6.1.4.1.1751.1.67.0.18 | Card Download is corrupt | ||
| NTF excelCardNotRecTrap | 1.3.6.1.4.1.1751.1.67.0.19 | Card type not recognized | ||
| NTF excelCardCfgResetTrap | 1.3.6.1.4.1.1751.1.67.0.20 | Card's Configuration has been reset to defaults. | ||
| NTF excelCardConnMapFailTrap | 1.3.6.1.4.1.1751.1.67.0.21 | Connection Map Failure. | ||
| NTF excelCardNoSWTrap | 1.3.6.1.4.1.1751.1.67.0.22 | Software does not have download for card. | ||
| NTF excelCardNoALawTrap | 1.3.6.1.4.1.1751.1.67.0.23 | Card does not support A-law encoding format. | ||
| NTF excelCardRevNotSuppTrap | 1.3.6.1.4.1.1751.1.67.0.24 | Card revision not supported by system software revision. | ||
| NTF excelEthernetErrTrap | 1.3.6.1.4.1.1751.1.67.0.25 | The switch determines the integrity of the host link by monitoring host ACKs to Poll messages. If two consecutive Poll messages are unacknowledged by the host, the switch resets its Ethernet Receiver and this trap will be sent. If the error continues even after reset, the problem could be caused by slow host processing (especially during boot-up). This can be prevented by increasing the polling interval. | ||
| NTF excelNoFanTrayTrap | 1.3.6.1.4.1.1751.1.67.0.26 | No fan tray installed | ||
| NTF excelExnetACommFailTrap | 1.3.6.1.4.1.1751.1.67.0.27 | Exnet Port A - Communication failure | ||
| NTF excelExnetBCommFailTrap | 1.3.6.1.4.1.1751.1.67.0.28 | Exnet Port B - Communication failure | ||
| NTF excelExnetAFiberFailTrap | 1.3.6.1.4.1.1751.1.67.0.29 | Exnet Port A - Fiber laser failure | ||
| NTF excelExnetBFiberFailTrap | 1.3.6.1.4.1.1751.1.67.0.30 | Exnet Port B - Fiber laser failure | ||
| NTF excelEXSAPITrap | 1.3.6.1.4.1.1751.1.67.0.31 | This EXS Node is not using the extended API. | ||
| NTF excelEXSConfTSTrap | 1.3.6.1.4.1.1751.1.67.0.32 | The available EXS Conferencing timeslot count has changed. | ||
| NTF excelEXSSCbusMasterChangedTrap | 1.3.6.1.4.1.1751.1.67.0.33 | The master of the SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides on has changed. | ||
| NTF excelEXSSCbusFailureTrap | 1.3.6.1.4.1.1751.1.67.0.34 | The SCbus that the Excel EXNET Connect card represented by excelExnetConnectIndex resides has failed. | ||
| NTF excelSS7NetCongestionTrap | 1.3.6.1.4.1.1751.1.67.0.35 | SS7 Signaling Network traffic has reached congested levels. | ||
| NTF excelSS7RemISUPUnavailTrap | 1.3.6.1.4.1.1751.1.67.0.36 | SS7 Remote ISUP unavailable. | ||
| NTF excelClockSourceLostTrap | 1.3.6.1.4.1.1751.1.67.0.37 | The Reference Clock Source has been lost. No host intervention is needed for this occurance. The switch will automatically switch the clock mode to the next available clock source. | ||
| NTF excelClockSourceLostClearedTrap | 1.3.6.1.4.1.1751.1.67.0.38 | The Reference Clock Source has been reestablished automatically by the switch. | ||
| NTF excelNoSupportDSPFuncTrap | 1.3.6.1.4.1.1751.1.67.0.39 | Hardware cannot support function type. | ||
| NTF excelPartialMessageReceivedTrap | 1.3.6.1.4.1.1751.1.67.0.40 | Partial message received. | ||
| NTF excelUnackedMsgTrap | 1.3.6.1.4.1.1751.1.67.0.41 | Unacknowledged Message. | ||
| NTF excelNodeIDAlreadyExistsTrap | 1.3.6.1.4.1.1751.1.67.0.42 | Node ID Already Exists. | ||
| NTF excelInvalidMsgLenTrap | 1.3.6.1.4.1.1751.1.67.0.43 | Invalid Message Length. | ||
| NTF excelLogSpanIDExistsTrap | 1.3.6.1.4.1.1751.1.67.0.44 | Logical span ID already exists on another node. | ||
| NTF excelNodeUpTrap | 1.3.6.1.4.1.1751.1.67.0.45 | This trap is sent when the Agent recognizes a new node in the system. | ||
| NTF excelNodeDownTrap | 1.3.6.1.4.1.1751.1.67.0.46 | This trap is sent when the Agent has lost connectivity to the switch. | ||
| NTF excelSubagentConnect | 1.3.6.1.4.1.1751.1.67.0.47 | This trap is sent when the subagent process successfully connects with the master agent. | ||
| NTF excelSwitchConnect | 1.3.6.1.4.1.1751.1.67.0.48 | This trap is sent when the subagent process successfully connects to the switch interface process. | ||
| NTF excelSwitchLossConnectivity | 1.3.6.1.4.1.1751.1.67.0.49 | This trap is sent when the subagent process detects a loss of connectivity with the switch interface process | ||
| NTF excelSpanCarrierGroupAlarm | 1.3.6.1.4.1.1751.1.67.0.50 | This trap is generated when the switch detects a Carrier Group Alarm for more then some customer configured time. | ||
| NTF excelSpanExcessiveSlips | 1.3.6.1.4.1.1751.1.67.0.51 | This trap will occur when the switch detects an abnormally high number of slips occurring | ||
| NTF excelSpanJ1Failure | 1.3.6.1.4.1.1751.1.67.0.52 | Generic J1 failure | ||
| NTF excelLineCardBusy | 1.3.6.1.4.1.1751.1.67.0.53 | This trap will occur when the line card exceeds it's final traffic threshold level | ||
| NTF excelLineCardApproachBusy | 1.3.6.1.4.1.1751.1.67.0.54 | This trap will occur when the line card reaches it's initial traffic threshold level | ||
| NTF excelLowMemory | 1.3.6.1.4.1.1751.1.67.0.55 | This trap will occur when memory usage on the line card exceeds the defined threshold level | ||
| NTF excelCardStatusChange | 1.3.6.1.4.1.1751.1.67.0.56 | This trap will occur on any generic card status change | ||
| NTF excelLowMemoryCleared | 1.3.6.1.4.1.1751.1.67.0.57 | This trap will occur when memory usage on the line card returns below the defined threshold level | ||
| NTF excelGenericEvent | 1.3.6.1.4.1.1751.1.67.0.58 | This trap will occur when an undefined event is received | ||
| NTF excelSubrateSwitchOver | 1.3.6.1.4.1.1751.1.67.0.59 | |||
| NTF excelSwitchOverInterrupt | 1.3.6.1.4.1.1751.1.67.0.60 | The D-channel has gone from being In Service to Out Of Service | ||
| NTF excelSwitchOverSuccess | 1.3.6.1.4.1.1751.1.67.0.61 | The controller switchover was successful. The new D channel is now the controller | ||
| NTF excelSwitchOverFailure | 1.3.6.1.4.1.1751.1.67.0.62 | The controller switchover failed. The existing D channel is still controlling the D channel | ||
| NTF excelBackupDiagnostics | 1.3.6.1.4.1.1751.1.67.0.63 | Information Alarm when the state of the D channel changes | ||
| NTF excelSCbusMasterChange | 1.3.6.1.4.1.1751.1.67.0.64 | The local bus clock master has changed e.g. If the EXNET Connect is configured to be the local (SC/MVIP) clock master and another resource on the local bus is configured to be the backup clock master and the EXNET Connect is then configured NOT to be master or fails to drive the clock, the backup master will take over and drive the clock. This alarm is sent when the EXNET Connect detects this. | ||
| NTF excelSCBusFail | 1.3.6.1.4.1.1751.1.67.0.65 | This event occurs wheneve a matrix has lost contact with a remote SS7 card that is controlling CIC's that are located on that node | ||
| NTF excelGeneralSoftwareError | 1.3.6.1.4.1.1751.1.67.0.66 | Default error message for unexpected errors. | ||
| NTF excelRearSlotController | 1.3.6.1.4.1.1751.1.67.0.67 | Communications resources are being currently controlled by the corresponding rear slot | ||
| NTF excelFrontSlotController | 1.3.6.1.4.1.1751.1.67.0.68 | Communications resources are being currently controlled by the corresponding front slot | ||
| NTF excelConnectNotification | 1.3.6.1.4.1.1751.1.67.0.69 | |||
| NTF excelRouteTableUpdated | 1.3.6.1.4.1.1751.1.67.0.70 | The active route table has been updated | ||
| NTF excelResourceGroupTableUpdated | 1.3.6.1.4.1.1751.1.67.0.71 | The active resource group table has been updated | ||
| NTF excelOldRouteTableDeleted | 1.3.6.1.4.1.1751.1.67.0.73 | A previously active routing table has been deleted | ||
| NTF excelRouteTableForcefullyDeleted | 1.3.6.1.4.1.1751.1.67.0.74 | The active route tabel was forcefully deleted | ||
| NTF excelResourceGroupTableForceDelete | 1.3.6.1.4.1.1751.1.67.0.75 | The active resource group table has been forcefully deleted | ||
| NTF excelLoadProblem | 1.3.6.1.4.1.1751.1.67.0.76 | This event will occur when a problem occurs during the flash or RAM loading | ||
| NTF excelTFTPFailure | 1.3.6.1.4.1.1751.1.67.0.77 | This event will occur when a problem occurs during TFTP processing | ||
| NTF excelPPLEventL3PCIC | 1.3.6.1.4.1.1751.1.67.0.78 | PPL event received from Layer 3 Plus CIC, component ID 15. The possible event ID's are : 1 Reset confirm indication 8 Remote maintenance block indication 9 Remote maintenance unblock indication 14 ISUP protocol violation 15 Remote hardware group block indication 16 Remote hardware group unblock indication 18 Local maintenance block success 19 Local maintenance unblock success 21 Local circuit maintenance unblocking indication 22 UCIC received 23 No GRS/RSC received 25 OLM received from the network 99 DSP resource allocation failure | ||
| NTF excelPPLEventL3PLINK | 1.3.6.1.4.1.1751.1.67.0.79 | PPL event received from Layer 3 Plus Link, component ID 16. The possible eventID's are: 1 Remote Inhibit Confirmation 2 Remore Uninhibit confirmation 3 Local inhibit denied 4 Local inhibit timeout 5 Local inhibit confirmation 6 Local uninhibit confirmation 7 Local uninhibit not possible 8 Local uninhibit timeout A Link in service B Link Out-of-service, L1_DEAD C Link Out-of-service, L5_OOS3 | ||
| NTF excelPPLEventCPC | 1.3.6.1.4.1.1751.1.67.0.80 | PPL event received from Call Processing Control, component ID 18. The possible eventID's are: 3 Continuity check incoming failure 4 Failure to ack COT after processing incomming continuity check 6 Failure to receive RLC after sending RFL 8 Continuity check outgoing failure 20 Maximum number of UTP retries completed without a response | ||
| NTF excelPPLEventSPRC | 1.3.6.1.4.1.1751.1.67.0.81 | PPL event Signal Procedure Control (SPRC), component ID 19. The possible eventID's are: 1 Format error in incoming message 2 Undefined CIC in incoming message 3 Undefined message received 4 Confusion Message received 5 Remote user part available 7 Unrecognized message received on unequipped CIC | ||
| NTF excelPPLEventBLS | 1.3.6.1.4.1.1751.1.67.0.82 | PPL event Blocking Signal Sending(BLS), component ID 22. The possible eventID's are: 1 Format error in incoming message 2 Undefined CIC in incoming message 3 Undefined message received 4 Confusion Message received 5 Remote user part available 7 Unrecognized message received on unequipped CIC | ||
| NTF excelPPLEventBLR | 1.3.6.1.4.1.1751.1.67.0.83 | PPL event received from Blocking Signal Reception(BLR), component ID 23. The possible eventID's are: 1 Blocking/Unblocking signal reception | ||
| NTF excelPPLEventCRS | 1.3.6.1.4.1.1751.1.67.0.84 | PPL event Circuit Reset Sending (CRS), component ID 24. The possible eventID's are: 1 First expiration of timer 17 | ||
| NTF excelPPLEventCRR | 1.3.6.1.4.1.1751.1.67.0.85 | PPL event Circuit Reset Reception (CRR), component ID 25. The possible eventID's are: 1 Circuit Reset Reception | ||
| NTF excelPPLEventUCIC | 1.3.6.1.4.1.1751.1.67.0.86 | PPL event Unequipped CIC Reception (UCIC), component Id 26. The possible eventID's are: 1 Unequipted CIC Reception | ||
| NTF excelPPLEventCGRS | 1.3.6.1.4.1.1751.1.67.0.87 | PPL event Circuit Group Reset Sending (CGRS), component Id 27. The possible eventID's are: 1 Failure to rcv ack after sending group reset 2 UCIC stop request received (ANSI only) | ||
| NTF excelPPLEventCGRR | 1.3.6.1.4.1.1751.1.67.0.88 | PPL event Circuit Group Reset Reception (CGRR), component Id 28. The possible eventID's are: 1 Failure to rcv ack after sending reset | ||
| NTF excelPPLEventGBUS | 1.3.6.1.4.1.1751.1.67.0.89 | PPL event Circuit Group Un/blocking Sending (GBUS), component Id 29. The possible eventID's are: 1 Expiration of T19 - No CGBA after GTB 2 Expiration of T21 - No CGUA after CGU 3 CGBA status bit mismatch 4 CGUA status bit mismatch 5 Incorrect parameter in received circuit group (un)blocking ack. | ||
| NTF excelPPLEventGBUR | 1.3.6.1.4.1.1751.1.67.0.90 | PPL event Circuit Group Un/blocking Reception (GBUR), component Id 30. The possible eventID's are: 1 Circuit Group Un/blocking Reception | ||
| NTF excelPPLEventHGBR | 1.3.6.1.4.1.1751.1.67.0.91 | PPL event Hardware Oriented Circuit Group Un/blocking Reception (HGBR), component Id 32. The possible eventID's are: 1 Circuit Group Un/blocking Reception | ||
| NTF excelPPLEventMTP3Hmdt | 1.3.6.1.4.1.1751.1.67.0.92 | PPL event Message Transfer Part3 Layer (HMDT), component Id 43. The possible eventID's are: 0 Remote processor outage 1 Remote processor restored 2 Local inhibit 3 Local uninhibit 6 UPU MSU received | ||
| NTF excelPPLEventMTP3Lsac | 1.3.6.1.4.1.1751.1.67.0.93 | PPL event Message Transfer Part3 Layer (LSAC), component Id 46. The possible eventID's are: 1 Link activation failure 2 Signaling Link failure 3 Signaling link test failure 4 Signaling link restoration | ||
| NTF excelPPLEventMTP3Tlac | 1.3.6.1.4.1.1751.1.67.0.94 | PPL event Message Transfer Part3 Layer (TLAC), component Id 60. The possible eventID's are: 0 Remote processor outage 1 Remote processor restored 2 Local inhibit 3 Local uninhibit 4 Remote inhibit 5 Remore uninhibit | ||
| NTF excelPPLEventMTP3Tsfc | 1.3.6.1.4.1.1751.1.67.0.95 | PPL event Message Transfer Part3 Layer (TSFC), component Id 63. The possible eventID's are: 1 Destination inaccessable 2 Destination accessable | ||
| NTF excelPPLEventISUPHlb | 1.3.6.1.4.1.1751.1.67.0.96 | PPL event ISUP HLB (ISUP Hardware Failure Oriented Locally Blocking State), component Id 36. The possible eventID's can be received are: 1 Hardware Failure Oriented Locally Blocking State | ||
| NTF excelPPLEventCRCR | 1.3.6.1.4.1.1751.1.67.0.97 | PPL event CRCR, component Id 68. The possible eventID's can be received are: 1 REL received with check indicator set to 3 2 T27 timer expired 3 Second failure of COT | ||
| NTF excelPPLEventMGBS | 1.3.6.1.4.1.1751.1.67.0.98 | PPL event MGBS(Maintaince Circuit Group blocking/unblocking Sending), component Id 69. The possible eventID's can be received are: 1 First Expiration of T19 2 First Expiration of T21 3 Stop event received in wait for CGBA state 4 Stop event received in wait for CGUA state | ||
| NTF excelPPLEventHGBS | 1.3.6.1.4.1.1751.1.67.0.99 | PPL event HGBS(Hardware Failure Circuit Group blocking/unblocking Sending), component Id 71. The possible eventID's are: 1 First Expiration of T19 2 First Expiration of T21 3 Stop event received in wait for CGBA state 4 Stop event received in wait for CGUA state | ||
| NTF excelPPLEventCQS | 1.3.6.1.4.1.1751.1.67.0.100 | PPL event CQS, component Id 118. The possible eventID's are: 3 Timer T28 expired | ||
| NTF excelPPLEventCVS | 1.3.6.1.4.1.1751.1.67.0.101 | PPL event CVS, component Id 120. The possible eventID's are: 6 CVR receive failed after reattempt | ||
| NTF excelPPLEventCRCS | 1.3.6.1.4.1.1751.1.67.0.102 | PPL event CRCS, component Id 129. The possible eventID's are: 1 T36 expired on continuity recheck 2 COT failure indication, process network IAM 3 T5 expired in waiting for RLC state 4 CPC not IDLE indication | ||
| NTF excelPPLEventCRO | 1.3.6.1.4.1.1751.1.67.0.103 | PPL event CRO, component Id 131. The possible eventID's are: 2 T5 expired in Wait for Release Complete State 3 1st continuity recheck attempt failure 4 Continuity recheck attempt failure 5 1st continuity recheck attempt successful | ||
| NTF excelDchannelFailure | 1.3.6.1.4.1.1751.1.67.0.104 | ISDN D Channel is establishing. The distant end is not communicating on the D-channel. | ||
| NTF excelVoIPModuleOOS | 1.3.6.1.4.1.1751.1.67.0.105 | The VDAC Voice over IP module is Out of Service. | ||
| NTF excelVoipModuleDead | 1.3.6.1.4.1.1751.1.67.0.106 | The VDAC Voice over IP module is no longer communicating. | ||
| NTF excelVoipModuleDspDead | 1.3.6.1.4.1.1751.1.67.0.107 | The VDAC Voice over IP DSP module is no longer communicating. | ||
| NTF excelVoipModuleReset | 1.3.6.1.4.1.1751.1.67.0.108 | The VDAC Voice over IP module has been reset. | ||
| NTF excelMatrixSwitchOver | 1.3.6.1.4.1.1751.1.67.0.109 | A matrix switchover has occurred. | ||
| excelProducts | 1.3.6.1.4.1.1751.1.67.2 | |||
| excelSystem | 1.3.6.1.4.1.1751.1.67.2.1 | |||
| STR excelNodeIdentifier | 1.3.6.1.4.1.1751.1.67.2.1.1 | DisplayString | read-write | An attribute assigned by the system administrator that uniquely identifies this host system. |
| STR excelNodeLocationIdentifier | 1.3.6.1.4.1.1751.1.67.2.1.2 | DisplayString | read-write | A unique identifier is a concatination of identifiers for the city, state, building and traffic unit identity of this host system. |
| STR excelNodeCurrentTime | 1.3.6.1.4.1.1751.1.67.2.1.3 | DisplayString | read-only | The value for the current time on this host system. |
| excelSwitch | 1.3.6.1.4.1.1751.1.67.2.2 | |||
| INT excelCurrentNode | 1.3.6.1.4.1.1751.1.67.2.2.1 | INTEGER | read-write | This agent can only view one node at a time. Whatever this excelCurrentNode is set to is the view against which other objects are matched. This value represents a LOGICAL node ID. |
| INT excelNodes | 1.3.6.1.4.1.1751.1.67.2.2.2 | INTEGER | read-only | The number of nodes or rows in excelNodeTable. |
| excelNodeTable | 1.3.6.1.4.1.1751.1.67.2.2.3 | not-accessible | This table contains a row for each node in the switch being managed by this agent. | |
| excelNodeEntry | 1.3.6.1.4.1.1751.1.67.2.2.3.1 | not-accessible | Definition for the ExcelNodeEntry List | |
| INT excelNodeIndex | 1.3.6.1.4.1.1751.1.67.2.2.3.1.1 | INTEGER | not-accessible | This object is a unique identifieer into the excelNodeTable. |
| INT excelNodeLogicalID | 1.3.6.1.4.1.1751.1.67.2.2.3.1.2 | INTEGER | read-only | This object represents the logical ID that the host application assigns to the node represented by this row. |
| INT excelNodePhysicalID | 1.3.6.1.4.1.1751.1.67.2.2.3.1.3 | INTEGER | read-only | This object represents the unique physical number used to identify the node. It is the serial number of the midplane. |
| INT excelNodeType | 1.3.6.1.4.1.1751.1.67.2.2.3.1.4 | INTEGER | read-only | This object indicates the node type of the node being managed. |
| excelNode | 1.3.6.1.4.1.1751.1.67.2.2.4 | |||
| excelNodeHardware | 1.3.6.1.4.1.1751.1.67.2.2.4.1 | |||
| excelCommunicationEquipment | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1 | |||
| excelCommunicationCard | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1 | |||
| excelCommCardTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1 | not-accessible | This table contains a row for each communication card in this node. A communication card is considered to be a card that plays a role in the call processing capabilities of the node. | |
| excelCommCardEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1 | not-accessible | ||
| SLO excelCommCardSlotIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.1 | SlotsInNode | not-accessible | This object represents the slot number occupied by this card. Note that this value is the index into the excelDeviceCardTable. |
| CAR excelCommCardOperState | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.2 | CardOperState | read-only | This object represents the state of this card. oosBySwitch(2) indicates that the switch has taken the card out of service. oosByHost(3) indicates that the host has taken the card out of service. standbyByHost(4) indicates that the host has put the card in a standby state. If this object is generalHWFailure(5), then the card is off-line and must be serviced. needsSystemSW(6) indicates that System Software needs to be downloaded to the switch. |
| INT excelCommCardResetReason | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.3 | INTEGER | read-only | This object represents the reason for this card's last reset. |
| INT excelCommCardConfigStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.4 | INTEGER | read-only | This object represents the state of the battery-backed configuration data. If it is invalid(1), then the card must be reconfigured by the host. |
| INT excelCommCardConfidenceTest | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.5 | INTEGER | read-only | Indicates status of Confidence test. |
| INT excelCommCardAction | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.6 | INTEGER | read-write | This object contains the actions that can occur on a card. These include : locked - takes the card out of service, but leave the current configuration intact. unlocked - puts a card out of service back into service shutdown - intermediate state when card is in the process of being locked. |
| STR excelCommCardActionTime | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.1.1.1.7 | DisplayString | read-only | Date and time of last action taken. |
| excelDSP | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2 | |||
| excelVoipDsp | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1 | |||
| INT excelVoipSlotNumber | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.1 | INTEGER | read-write | This object represents the index of the card that information will be presented on |
| excelVoipDspTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2 | not-accessible | ||
| excelVoipDspEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1 | not-accessible | ||
| INT excelVoipDspIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.1 | INTEGER | not-accessible | Index into the Voice over IP DSP table |
| INT excelVoipDspInstalled | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.2 | INTEGER | read-only | This object indicates if the DSP module is installed or not. |
| INT excelVoipDspNumChannelsSupported | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.3 | INTEGER | read-only | This object indicates the number of channels available from the slot. |
| CAR excelVoipDspOperState | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.4 | CardOperState | read-only | This object indicates operational state of the dsp. |
| STR excelVoipDspArtworkRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.5 | DisplayString | read-only | This object indicates operational state of the dsp. |
| INT excelVoipDspFuncRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.6 | INTEGER | read-only | This object indicates function revision of this dsp. |
| STR excelVoipDspHWRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.7 | DisplayString | read-only | This object indicates function version of the hardware associated of this dsp. |
| STR excelVoipDspSWRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.8 | DisplayString | read-only | This object indicates function version of the software associated of this dsp. |
| INT excelVoipDspRamSize | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.9 | INTEGER | read-only | This object indicates the current amount of RAM on this dsp. |
| INT excelVoipDspSerialNum | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.10 | INTEGER | read-only | This object indicates the serial number of this dsp. |
| INT excelVoipDspRamBuildNumber | 1.3.6.1.4.1.1751.1.67.2.2.4.1.1.2.1.2.1.11 | INTEGER | read-only | This object indicates the build number of this dsp. |
| excelDeviceEquipment | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2 | |||
| excelDeviceCard | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1 | |||
| excelDeviceCardTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1 | not-accessible | The excelDeviceCardTable, which has a row for each of the 'slots' (the maximum being, excelConfigMaxSlot) in this node. Note that this table will have an entry for each slot whether it is filled or not. It is ordered by slot number. And a slot does not necessarily mean that the card is hot swappable, like the fan tray or midplane. The columns represent information that (for the most part) is common between all types of cards. | |
| excelDeviceCardEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1 | not-accessible | ||
| SLO excelDeviceCardSlotIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.1 | SlotsInNode | not-accessible | This is the slot number of the slot that the card resides in as well as the index into excelDeviceCardTable. |
| INT excelDeviceCardType | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.2 | INTEGER | read-only | The type of card that is in this slot. If the slot does not contain a card, then the value is empty(2). It the card is unable to communicate, then the value is dead(3). If the agent is unfamiliar with the card, then the value is other(1). Otherwise, it is a value representing one of the appropriate Excel products that can reside in this slot. |
| STR excelDeviceCardModelDescription | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.3 | DisplayString | read-only | This object is an ASCII string that represents the model description of the card in this slot. |
| STR excelDeviceCardArtworkRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.4 | DisplayString | read-only | This field has an ASCII character in the range 'A' to 'Z' (0x41-0x5B) which indicates the revision level of the card's Printed Circuit Artwork. |
| INT excelDeviceCardFuncRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.5 | INTEGER | read-only | This object indicates the card's functional revision level. |
| STR excelDeviceCardHWRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.6 | DisplayString | read-only | This object is an ASCII string that represents the ROM Revision of the card. |
| STR excelDeviceCardSWRevision | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.7 | DisplayString | read-only | This object is an ASCII string that represents the revision levels of the system software running on this card. |
| INT excelDeviceCardRamSize | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.8 | INTEGER | read-only | This object indicates the amount of RAM that is on the card. The RAM is measured in 1K increments. |
| INT excelDeviceCardSerialNum | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.9 | INTEGER | read-only | This object contains the serial number of the card. |
| INT excelDeviceCardRAMBuildNum | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.1.1.1.10 | INTEGER | read-only | This object contains the RAM Build number of the card. |
| excelUtility | 1.3.6.1.4.1.1751.1.67.2.2.4.1.2.2 | |||
| excelResourceEquipment | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3 | |||
| excelResourceUtilization | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1 | |||
| INT excelResourceSlotId | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.1 | INTEGER | read-write | This object represents the index of the card information will be presented on |
| excelResourceUsageTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.2 | not-accessible | ||
| excelResourceUsageEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.2.1 | not-accessible | ||
| INT excelResourceUsageIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.2.1.1 | INTEGER | not-accessible | |
| INT excelCpuTime | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.2.1.2 | INTEGER | read-only | This object represents the total amount of CPU time that has been used by the selectd card. |
| INT excelMcbUsage | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.2.1.3 | INTEGER | read-only | This object represents the percentage MCB's currently in use |
| excelRegionTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3 | not-accessible | ||
| excelRegionEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3.1 | not-accessible | ||
| INT excelRegionIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3.1.1 | INTEGER | not-accessible | |
| INT excelRegionId | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3.1.2 | INTEGER | read-only | |
| INT excelRegionSize | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3.1.3 | INTEGER | read-only | |
| INT excelRegionUsed | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.3.1.4 | INTEGER | read-only | The number of bytes in this region that are currently in use |
| excelPartitionTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4 | not-accessible | ||
| excelPartitionEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4.1 | not-accessible | ||
| INT excelPartitionIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4.1.1 | INTEGER | not-accessible | |
| INT excelPartitionId | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4.1.2 | INTEGER | read-only | |
| INT excelPartitionSize | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4.1.3 | INTEGER | read-only | |
| INT excelPartitionUsed | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.4.1.4 | INTEGER | read-only | The number of bytes in this partition that are currently in use |
| excelCpuUsageTable | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.5 | not-accessible | ||
| excelCpuUsageEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.5.1 | not-accessible | ||
| INT excelCpuUsageIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.5.1.1 | INTEGER | not-accessible | |
| INT excelCpuUsageTaskId | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.5.1.2 | INTEGER | read-only | |
| INT excelCpuUsageUsed | 1.3.6.1.4.1.1751.1.67.2.2.4.1.3.1.5.1.3 | INTEGER | read-only | |
| excelNodeSoftware | 1.3.6.1.4.1.1751.1.67.2.2.4.2 | |||
| excelSystemSoftware | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1 | |||
| excelSystemConfig | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.1 | |||
| excelSystemAlarm | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2 | |||
| INT excelSysLastAlarmTrap | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.1 | INTEGER | read-only | This object represents the last trap that has been sent by this agent. |
| INT excelSysLastAlarmSeverity | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.2 | INTEGER | read-only | If an alarm occurred and a trap was sent, then this object indicates the severity. |
| INT excelSysLastAlarmNode | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.3 | INTEGER | read-only | The Physical Node ID of the last node to encounter an alarm condition. |
| INT excelSysLastAlarmStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.4 | INTEGER | read-only | The last Alarm Status change value to go out in a trap. |
| DSP excelSysLastAlarmDSPLastBlocked | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.5 | DSPFunctionTypes | read-only | The last DSP Function Type that was blocked. |
| INT excelSysLastAlarmRefClockSrc | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.2.6 | INTEGER | read-only | If a Reference Clock Source Lost alarm occurred, this object stores which reference clock the alarm is occurring on. If this alarm has not occurred, then the value will be equal to notApplicable(1). |
| excelRing | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3 | |||
| excelRingTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2 | not-accessible | It is possible for a node to be a member of numerous rings. Therefore, each row of this table describes the characteristics of each ring of which this node is a member. | |
| excelRingEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1 | not-accessible | Definition of the ExcelRingEntry sequence | |
| INT excelRingLogicalIDIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.1 | INTEGER | not-accessible | The logical ID of the ring being described by this row. |
| INT excelRingStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.2 | INTEGER | read-only | This object represents the status of the proprietary fiber network that connects the nodes of an EXS. If this object equals outOfService(5), then excelRingOOSReason will contain the reason that this ring is considered out of service. |
| INT excelRingOOSReason | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.3 | INTEGER | read-only | If the node has been declared out of service on this ring, and excelRingStatus equals outOfService(5), then this object will equal any value other than none(1). |
| INT excelRingTransmitMode | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.4 | INTEGER | read-only | The transmit mode of this node as it relates to this ring |
| INT excelRingNodeRole | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.5 | INTEGER | read-only | The role that this node palys in this ring |
| SLO excelRingCtrlSlot | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.6 | SlotsInNode | read-only | The slot in which the EXNET I/O controller resides for this node. |
| INT excelRingPortAStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.7 | INTEGER | read-only | The status of port A on the EXNET I/O controller card for this node on this ring. |
| INT excelRingPortBStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.8 | INTEGER | read-only | The status of port B on the EXNET I/O controller card for this node on this ring. |
| INT excelRingSourcePacketID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.3.2.1.9 | INTEGER | read-only | The lowest packet ID assigned to this node for this ring. |
| excelRingNodeStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4 | |||
| INT ringID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.1 | INTEGER | read-only | The id of this ring |
| ringStatusTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2 | not-accessible | This table describes the phyysical and logical contents of the selected ring. | |
| ringStatusTableEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1 | not-accessible | ||
| INT ringStatusIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.1 | INTEGER | not-accessible | Index into the ring status entry table |
| INT ringStatusTransmitting | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.2 | INTEGER | read-only | Is this node currently transmitting on a ring. |
| IP ringStatusIpAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.3 | IpAddress | read-only | The IP address of this object on the ring |
| INT ringStatusLogicalId | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.4 | INTEGER | read-only | The logical ID of this node on the ring |
| INT ringStatusPhysicalId | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.5 | INTEGER | read-only | The physical Id on this node on the ring. |
| INT ringStatusLoadMajorRev | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.6 | INTEGER | read-only | The major revision number of the current build |
| INT ringStatusLoadMinorRev | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.7 | INTEGER | read-only | The minor revision number of the current build |
| INT ringStatusLoadBuildNum | 1.3.6.1.4.1.1751.1.67.2.2.4.2.1.4.2.1.8 | INTEGER | read-only | The number of the current build |
| excelCommunicationSoftware | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2 | |||
| excelMatrix | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1 | |||
| excelMtxTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1 | not-accessible | This table contains an entry for each matrix card in the system. Note that in an EXnet Connect system, there will be a row in this table to represent the EXnet Connect Card. | |
| excelMtxEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1 | not-accessible | ||
| SLO excelMtxSlotIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.1 | SlotsInNode | not-accessible | The slot in which the matrix represented by this row resides. |
| INT excelMtxPosition | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.2 | INTEGER | read-only | This object indicates the physical position of this matrix card. Left(1), Right(2), or Other(3) |
| INT excelMtxType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.3 | INTEGER | read-only | This object indicates the node type of this matrix card. other(1), pcx(2), csn(3), lnx(4), or exnetConnect(5). |
| INT excelMtxState | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.4 | INTEGER | read-only | This object indicates the current state of this matrix card. The possible return values are: booting(1), initializing(2), standby(3), switchOver(4), active(5), other(6), disabled(7). |
| INT excelMtxAdjacentMatrixStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.5 | INTEGER | read-only | This object indicates the status of the adjacent matrix card. notPresent(1), detected(2), noHost(3), ok(4), other(5) |
| INT excelMtxHostLink | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.6 | INTEGER | read-only | This object indicates the status of the matrix card host link. |
| INT excelMtxRamLoadPresent | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.7 | INTEGER | read-only | This object indicates the status of the matrix card download. |
| INT excelMtxReadyForConfiguration | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.8 | INTEGER | read-only | This object indicates the state of the matrix card. |
| IP excelMtxIpAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.9 | IpAddress | read-only | This object is the IP Address associated with the currently active matrix card. |
| STR excelMtxBootMajorVersion | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.10 | DisplayString | read-only | Current value of the major version number of the boot software. |
| STR excelMtxBootMinorVersion | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.11 | DisplayString | read-only | If value is equal to zero (0), no system software is present |
| STR excelMtxSystemSoftwareMajor | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.12 | DisplayString | read-only | If value is equal to zero (0), no system software is present |
| STR excelMtxSystemSoftwareMinor | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.13 | DisplayString | read-only | If value is equal to zero (0), no system software is present |
| STR excelMtxSystemSoftwareBuild | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.14 | DisplayString | read-only | If value is equal to zero (0), no system software is present |
| IP excelMtxSecIpAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.1.1.15 | IpAddress | read-only | This object is the IP Address associated with the current atand-by matrix card. |
| excelMatrixManagement | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.2 | |||
| STR excelMatrixSwitchOverTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.1.2.2 | DisplayString | read-only | The date and time when the matrix switchover occurred |
| excelExnetConnect | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2 | |||
| excelExnetConnectTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2.1 | not-accessible | This table contains a row for each EXNET Connect Card in the PC Chassis. | |
| excelExnetConnectEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2.1.1 | not-accessible | Definition of the ExcelExnetConnectEntry sequence | |
| INT excelExnetConnectLogicalNodeIDIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2.1.1.1 | INTEGER | read-only | This object is the logical Node ID that has been assigned to this EXNET Connect |
| INT excelExnetConnectClockMaster | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2.1.1.2 | INTEGER | read-only | This object indicates whether or not the EXNET Connect Card is the clock master on the bus. If the value is yes(2), then the EXNET Connect card is the clock master. |
| INT excelExnetConnectClockSpeed | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.2.1.1.3 | INTEGER | read-only | The clock speed of the resource bus on this EXNET Connect. |
| excelSpans | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3 | |||
| excelGeneralSpan | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1 | |||
| excelSpanTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1 | not-accessible | This table contains a row for each active span defined on a line card contained in the chassis. | |
| excelSpanEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1 | not-accessible | Definition of the ExcelSpanEntry sequence | |
| INT excelSpanTableIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.1 | INTEGER | not-accessible | The Logical Span ID being accessed |
| INT excelLogicalSpanId | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.2 | INTEGER | read-only | The Logical Span ID being accessed |
| C32 excelSpanBipolarViolationEx | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.3 | Counter32 | read-only | The number of Bipolar Violations that have occurred on this span since the span became active or since the last request |
| C32 excelSpanFrameErrors | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.4 | Counter32 | read-only | If the queried span in a T1 span, then this field will contain the number of Bit Frame Errors that have occurred on this span since the span became active or since the last request. If the queried span in an E1 span, then this field will contain the number of Frame Alignment Signal Errors that have occurred on this span since the span became active or since the last request |
| C32 excelSpanSlipErrors | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.5 | Counter32 | read-only | The number of slips that have occurred on this span since the span became active or since the last request |
| C32 excelSpanLossofFrame | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.1.1.1.6 | Counter32 | read-only | The number of loss of frame that have occurred on this span since the since the last request |
| excelSpanManagement | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.2 | |||
| INT excelCurrentSpanId | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.2.1 | INTEGER | read-write | The id of the span an in/out of service action will occur on. |
| INT excelSpanAction | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.2.2 | INTEGER | read-write | The action to be taken againts the span id defined by excelCurrentSpanId. |
| INT excelChannelAction | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.3.2.3 | INTEGER | read-write | The action to be taken againts the channels associated with the span as defined in excelCurrentSpanID |
| excelSS7 | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4 | |||
| excelSS7Config | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1 | |||
| excelSS7CardTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1 | not-accessible | This table contains a row for each SS7 Card in the current node. | |
| excelSS7CardEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1 | not-accessible | Definition of the ExcelSS7CardEntry sequence | |
| INT excelSS7CardSlotNumberIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.1 | INTEGER | not-accessible | This entry represents slot number in which this card resides. |
| INT excelSS7CardRedundancyConfiguredRole | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.2 | INTEGER | read-only | This entry represents the configured role of this card in SS7 redundancy. The current role may be different |
| INT excelSS7CardRedundancyCurrentRole | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.3 | INTEGER | read-only | This entry represents the current role of this card in SS7 redundancy. |
| INT excelSS7CardRedundancyMate | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.4 | INTEGER | read-only | This entry represents the slot number of the SS7 card associated with this card for the purpose of SS7 redundancy. A value of 255 (0xff) indicates that there is no association. |
| INT excelSS7CardRedundancyStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.5 | INTEGER | read-only | This entry represents the current role of this card in SS7 redundancy. |
| INT excelSS7CardStackID1 | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.6 | INTEGER | read-only | This entry represents the ID of the first of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured. |
| INT excelSS7CardStackID2 | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.7 | INTEGER | read-only | This entry represents the ID of the second of four possible stack id resident on this card. A value of 255 (0xff) indicates not configured. |
| INT excelSS7CardStackID3 | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.8 | INTEGER | read-only | This entry represents the ID of the third of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured. |
| INT excelSS7CardStackID4 | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.9 | INTEGER | read-only | This entry represents the ID of the fourth of four possible stack ids resident on this card. A value of 255 (0xff) indicates not configured. |
| INT excelSS7CardMaximumLinks | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.1.1.10 | INTEGER | read-only | This entry represents the maximum number of links supported by this card. |
| excelSS7ConfigLinkTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2 | not-accessible | This table contains a row for each link that is assigned in the node. | |
| excelSS7LinkEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1 | not-accessible | Definition of the ExcelSS7LinkEntry sequence | |
| INT excelSS7LinkStackIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.1 | INTEGER | not-accessible | This entry represents the Stack with which this link is associated. A value of 255 (0xff) indicates not configured. |
| INT excelSS7LinkLinkIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.2 | INTEGER | not-accessible | This entry represent the ID of this link. A value of 255 (0xff) indicates not configured. |
| INT excelSS7LinkLinkSetIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.3 | INTEGER | not-accessible | This entry represents the Link Set with which this link is associated. A value of 255 (0xff) indicates not configured. |
| INT excelSS7LinkStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.4 | INTEGER | read-only | This entry represents the status of this link. |
| INT excelSS7LinkSignalingLinkCode | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.5 | INTEGER | read-only | This entry represents the Signaling Link Code. |
| INT excelSS7LinkDataRate | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.6 | INTEGER | read-only | This entry represents the data rate for this link. |
| INT excelSS7LinkLogicalSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.7 | INTEGER | read-only | This entry represents the Logical Span on which this link resides. |
| INT excelSS7Linkchannel | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.2.1.8 | INTEGER | read-only | This entry represents the Channel Offset on which this link resides. |
| excelSS7StackTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3 | not-accessible | This table contains a row for each SS7 Stack in the current node. | |
| excelSS7StackEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1 | not-accessible | Definition of the ExcelSS7StackEntry sequence | |
| INT excelSS7StackIDIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.1 | INTEGER | not-accessible | This entry represents the stack id. |
| STR excelSS7StackOPC | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.2 | DisplayString | read-only | This entry represents this Origination Point Code for this SS7 node. |
| SS7 excelSS7StackMTPVariant | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.3 | SS7VariantsTypes | read-only | This entry represents the MTP variant supported. |
| SS7 excelSS7StackISUPVariant | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.4 | SS7VariantsTypes | read-only | This entry represents the ISUP variant supported. |
| SS7 excelSS7StackL3PVariant | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.5 | SS7VariantsTypes | read-only | This entry represents the L3P variant supported. |
| SS7 excelSS7StackTUPVariant | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.6 | SS7VariantsTypes | read-only | This entry represents the TUP variant supported. |
| SS7 excelSS7StackL3PTUPVariant | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.3.1.7 | SS7VariantsTypes | read-only | This entry represents the L3P TUP variant supported. |
| excelSS7LinkSetTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4 | not-accessible | This table contains a row for each SS7 LinkSet in the current node. | |
| excelSS7LinkSetEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4.1 | not-accessible | Definition of the ExcelSS7LinkSetEntry sequence | |
| INT excelSS7LinkSetIDIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4.1.1 | INTEGER | not-accessible | This entry represents the logical link set id. |
| INT excelSS7LinkSetStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4.1.2 | INTEGER | read-only | This entry represents the link set status. |
| STR excelSS7LinkSetAPC | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4.1.3 | DisplayString | read-only | This entry represents the APC for this link. |
| INT excelSS7LinkSetStackIDIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.1.4.1.4 | INTEGER | read-only | This entry represents the Logical Stack ID associated with this link. |
| excelSS7Statistics | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.4.2 | |||
| excelPPL | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5 | |||
| INT excelPPLComponentId | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.1 | INTEGER | read-only | Component id of the PPL event being processed |
| excelPPLComponentStatistics | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2 | |||
| excelL3PCICTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1 | not-accessible | This table will contain information on the ppl L3P CIC events receicved and the date and time of the last one received. Only the following event ID will be captured: 8 Remote maintaince block indication 15 Remote hardware group block indication 18 Local maintaince block success 22 UCIC received | |
| excelL3PCICEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1 | not-accessible | ||
| INT excelL3PCICIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelL3PCICSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelL3PCICChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelL3PCICEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelL3PCICTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelL3PCICCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelL3PCICStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.1.1.7 | RowStatus | read-create | The status of this program entry |
| excelL3PLinkTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2 | not-accessible | This table will contain information on the ppl L3P link events receicved and the date and time of the last one received. Only the following event ID will be captured: 10 - Link in service 11 - Link out-of-service, L1_DEAD 12 - Link out of service, L5_OOS | |
| excelL3PLinkEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1 | not-accessible | ||
| INT excelL3PLinkIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelL3PLinkSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelL3PLinkChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelL3PLinkEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelL3PLinkTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelL3PLinkCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelL3PLinkStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.2.1.7 | RowStatus | read-create | The status of this program entry |
| excelCPCTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3 | not-accessible | This table will contain information on the ppl CPC events receicved and the date and time of the last one received. Only the following event ID will be captured: 20 Maximum number of UTP retries completed without a response | |
| excelCPCEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1 | not-accessible | ||
| INT excelCPCIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelCPCSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelCPCChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelCPCEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelCPCTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelCPCCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelCPCStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.3.1.7 | RowStatus | read-create | The status of this program entry |
| excelSPRCTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4 | not-accessible | This table will contain information on the ppl SPRC events receicved and the date and time of the last one received. Only the following event ID will be captured: 2 Undefined CIC in incoming message 5 Remote user part available | |
| excelSPRCEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1 | not-accessible | ||
| INT excelSPRCIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelSPRCSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelSPRCChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelSPRCEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelSPRCTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelSPRCCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelSPRCStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.4.1.7 | RowStatus | read-create | The status of this program entry |
| excelUCICTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5 | not-accessible | This table will contain information on the ppl UCIC events receicved and the date and time of the last one received. Only the following event ID will be captured: 1 Unequipped CIC reception | |
| excelUCICEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1 | not-accessible | ||
| INT excelUCICIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelUCICSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelUCICChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelUCICEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelUCICTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelUCICCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelUCICStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.5.1.7 | RowStatus | read-create | The status of this program entry |
| excelHMDTTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6 | not-accessible | This table will contain information on the ppl HMDT events receicved and the date and time of the last one received. Only the following event ID will be captured: 0 Remote processor outage 2 Local Inhibit 6 UPN MSU Received | |
| excelHMDTEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1 | not-accessible | ||
| INT excelHMDTIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelHMDTSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelHMDTChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelHMDTEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelHMDTTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelHMDTCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelHMDTStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.6.1.7 | RowStatus | read-create | The status of this program entry |
| excelLSACTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7 | not-accessible | This table will contain information on the ppl LSAC events receicved and the date and time of the last one received. Only the following event ID will be captured: 2 Signaling Link Failure | |
| excelLSACEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1 | not-accessible | ||
| INT excelLSACIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelLSACSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelLSACChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelLSACEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelLSACTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelLSACCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelLSACStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.7.1.7 | RowStatus | read-create | The status of this program entry |
| excelTLACTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8 | not-accessible | This table will contain information on the ppl TLAC events receicved and the date and time of the last one received. Only the following event ID will be captured: 0 Remote processor outage 2 Local Inhibit 4 Remote Inhibit | |
| excelTLACEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1 | not-accessible | ||
| INT excelTLACIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelTLACSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelTLACChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelTLACEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelTLACTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelTLACCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelTLACStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.8.1.7 | RowStatus | read-create | The status of this program entry |
| excelTSFCTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9 | not-accessible | This table will contain information on the ppl TSFC events receicved and the date and time of the last one received. Only the following event ID will be captured: 1 Destination Insaccessible | |
| excelTSFCEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1 | not-accessible | ||
| INT excelTSFCIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelTSFCSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelTSFCChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelTSFCEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelTSFCTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelTSFCCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelTSFCStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.9.1.7 | RowStatus | read-create | The status of this program entry |
| excelCROTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10 | not-accessible | This table will contain information on the ppl CRO events receicved and the date and time of the last one received. Only the following event ID will be captured: 4 Continuity recheck attepmt failure | |
| excelCROEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1 | not-accessible | ||
| INT excelCROIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.1 | INTEGER | not-accessible | Index into this table. |
| INT excelCROSpanID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.2 | INTEGER | read-create | The id of the span this event has occurred on. |
| INT excelCROChannelID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.3 | INTEGER | read-create | The id of the channel this event has occurred on. |
| INT excelCROEventID | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.4 | INTEGER | read-create | Id of the event that has occurred. |
| STR excelCROTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.5 | DisplayString | read-create | The time of the last occurance of this event. |
| INT excelCROCount | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.6 | INTEGER | read-create | The current number of times this event has occurred since system startup |
| ROW excelCROStatus | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.5.2.10.1.7 | RowStatus | read-create | The status of this program entry |
| excelISDN | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6 | |||
| excelISDNConfig | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1 | |||
| excelISDNConfigDChanTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1 | not-accessible | This table contains a row for each D Channel that is assigned in the node. | |
| excelISDNConfigDChanEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1 | not-accessible | Definition of the ExcelISDNConfigDChanEntry sequence | |
| INT excelISDNConfigDChanSpanIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.1 | INTEGER | read-only | The Logical Span ID of the span which contains the channel assigned to the D Channel represented by this row. |
| INT excelISDNConfigDChanIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.2 | INTEGER | read-only | The Channel ID of the channel assigned to the D Channel represented by this row. |
| INT excelISDNConfigDChanConnType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.3 | INTEGER | read-only | The connection type of the D Channel represented by this row. |
| INT excelISDNConfigDChanHDLCBitPol | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.4 | INTEGER | read-only | The HDLC Bit Polarity of the D Channel represented by this row. |
| INT excelISDNConfigDChanBChanSelect | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.5 | INTEGER | read-only | The B Channel Selection Mode associated with the D Channel that is represented by this row. |
| INT excelISDNConfigDChanBChanEncTrans | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.6 | INTEGER | read-only | The B Channel Encoding for transmission associated with the D Channel that is reprsented by this row. |
| INT excelISDNConfigDChanLocation | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.7 | INTEGER | read-only | The location of the D Channel represented by this row. |
| INT excelISDNConfigDChanPhysicalMedium | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.6.1.1.1.8 | INTEGER | read-only | The physical medium of the D channel. Typically a 64kbps T1/E1/J1 line. |
| excelMediaGateway | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7 | |||
| excelMGSystem | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.1 | |||
| INT excelMGActiveProtocol | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.1.1 | INTEGER | read-only | The current active protocol executing on the matrix. |
| STR excelMGSystemName | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.1.2 | DisplayString | read-only | The name of the Media Gateway system. The default name will the IP Address of the active matrix. |
| SLO excelMGNumSlots | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.1.3 | SlotsInNode | read-only | The number of slots in th e chassis available for Media Gateway Hardware. |
| excelMGVoip | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2 | |||
| excelVoipAddressTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1 | not-accessible | ||
| excelVoipAddressEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1 | not-accessible | ||
| INT excelVoipAddressIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.1 | INTEGER | not-accessible | This is the index into the excel VoIP address table . |
| INT excelVoipAddressEntityType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.2 | INTEGER | read-only | This object describes the entity on the Vdac card being displayed. |
| IP excelVoipIpAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.3 | IpAddress | read-only | This object displays the IP Address assigned to the current entity. |
| IP excelVoipSubNetMask | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.4 | IpAddress | read-only | This object displays the subnet mask assigned to the current entity. |
| IP excelVoipIpGateway | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.5 | IpAddress | read-only | This object displays the default IP Gateway Address assigned to the current entity. |
| INT excelVoipResetIndicator | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.1.1.6 | INTEGER | read-only | This object discribes if an object reset is needed. |
| IP excelMGResAttrIpAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.2 | IpAddress | read-write | This object displays the IP Address needed to get Resource Attribute information. |
| excelMGResourceAttributeTable | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3 | not-accessible | ||
| excelMGResourceAttributeEntry | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1 | not-accessible | ||
| SLO excelMGResAttrIndex | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.1 | SlotsInNode | not-accessible | Index into the excelMGResourceAttribute table. |
| PAY excelMGPayloadType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.2 | PayloadTypes | read-only | |
| INT excelMGPayloadSize | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.3 | INTEGER | read-only | The basic packet rate of an RTP Packet that is sent out over Ethernet |
| INT excelMGSilenceSupression | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.4 | INTEGER | read-only | This object indicates if silence supression has been enabled. |
| INT excelMGEchoCancellation | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.5 | INTEGER | read-only | This object determines if echo cancellation logic is enabled or not. |
| INT excelMGMinDelayValue | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.6 | INTEGER | read-only | Time in milliseconds of the minimum delay value. |
| INT excelMGMaxDelayValue | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.7 | INTEGER | read-only | Time in milliseconds of the maximum delay value. |
| INT excelMGAdaptionRate | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.8 | INTEGER | read-only | Time in milliseconds of the adaption rate |
| INT excelMGFaxType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.9 | INTEGER | read-only | The object returns the current Fax type. |
| INT excelMGModemEnableTransport | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.10 | INTEGER | read-only | |
| PAY excelMGBypassCoderType | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.11 | PayloadTypes | read-only | The object returns the current bypass coder types. |
| PAC excelMGRtpPacketDepth | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.12 | PacketDepth | read-only | This object returns the redundancy packet depth for RTP. |
| PAC excelMGFaxPacketDepth | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.13 | PacketDepth | read-only | This objects returns the current Fax redundancy packet depth. |
| PAC excelMGModemPacketDepth | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.14 | PacketDepth | read-only | This object returns the current modem redundancy packet depth. |
| INT excelMGTypeOfServicePrecedence | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.15 | INTEGER | read-only | |
| INT excelMGTypeOServiceDelay | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.16 | INTEGER | read-only | |
| INT excelMGTypeOfServiceThroughput | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.17 | INTEGER | read-only | |
| INT excelMGTypeOfServiceReliability | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.18 | INTEGER | read-only | |
| INT excelMGTypeOfServiceCost | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.19 | INTEGER | read-only | |
| INT excelMGRtcpPortOffset | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.20 | INTEGER | read-only | This object returns the current modem redundancy packet depth. |
| INT excelMGT38PortOffset | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.2.3.1.21 | INTEGER | read-only | This object returns the current modem redundancy packet depth. |
| excelMGConfig | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3 | |||
| IP excelMGConfigPrimaryMGCAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3.1 | IpAddress | read-only | IP Address of the primary softswitch (call agent) |
| INT excelMGConfigPrimaryPort | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3.2 | INTEGER | read-only | The port number used when connection to the primary softswitch call agent |
| IP excelMGConfigSecondaryMGCAddress | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3.3 | IpAddress | read-only | IP Address of the secondary softswitch (call agent) |
| INT excelMGConfigSecondaryPort | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3.4 | INTEGER | read-only | The port number used when connection to the secondary softswitch call agent |
| INT excelMGConfigLocalPort | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.3.5 | INTEGER | read-only | Port number assigned to the local protocol task |
| excelMGConfigIpdc | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.4 | |||
| INT excelMGConfigIpdcReconnectAttempts | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.4.1 | INTEGER | read-only | The number of time the local protocol task will attempt to connect to the currently active Call Agent |
| excelMGConfigMgcp | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.5 | |||
| INT excelConfigMgcpPriTransmitInterval | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.5.1 | INTEGER | read-only | Count used when switching over to a secondary call agent from a primary call agent |
| INT excelConfigMgcpSecTransmitInterval | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.5.2 | INTEGER | read-only | Count used when switching over to a primary call agent from a secondary call agent |
| INT excelConfigMgcpResponseInterval | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.5.3 | INTEGER | read-only | This object specifies the time the gateway holds onto a message response sent to the CA. This is for solicited messages sent from the CA. If the time expires, then the gateway removes the response from the response queue. If the CA sends another solicited message to the gateway and the response is in the response queue, then the gateway sends the response which is contained in the response queue. This essentially means that for every solicited message sent from the CA, the gateway looks in its response queue to see if it has a response for that message. |
| INT excelConfigMgcpRetransmissionTime | 1.3.6.1.4.1.1751.1.67.2.2.4.2.2.7.5.4 | INTEGER | read-only | When the gateway sends an unsolicited message to the CA, and if a response is not received, this parameter specifies the time before the gateway resends the message. |
| excelOAMP | 1.3.6.1.4.1.1751.1.67.2.3 | |||
| INT excelEXSAgentVerbose | 1.3.6.1.4.1.1751.1.67.2.3.1 | INTEGER | read-write | This variable will allow debugging messages to be turned off and on dynamically for the EXSAgent process |
| INT excelEXSEventManagerVerbose | 1.3.6.1.4.1.1751.1.67.2.3.2 | INTEGER | read-write | Ths object allows the end users to turn debugging information on dynamically for process EXSEventManager. |
| excelExtension | 1.3.6.1.4.1.1751.1.67.2.4 |
RFC description
Provides SNMP management for Excel EXS family of switches, enabling monitoring and control of switching operations.
Start monitoring Lucent Excel-series Ethernet/telephony switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.