ERICSSON-ELN-MIB

All MIBs › ERICSSON-ELN-MIB

Organization: Ericsson

Last Updated: 2006-06-14

Category: Vendor: Ericsson

Description: Provides operational monitoring and status objects for Ericsson ELN Ethernet line node devices in access networks.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ERICSSON-ELN-MIB?

This Ericsson enterprise MIB monitors and configures the Ethernet Line Node (ELN), an Ethernet access-network device, covering its network processor, main board, mezzanine boards, host processor, Ethernet ports, VLANs, QoS, and IGMP functionality. It exposes hardware identification (model, product number, revision, serial number) and environmental data (board temperature and temperature limit), system-level configuration (real-time clock, NTP client status/server, syslog server), and Ethernet/VLAN/QoS/IGMP operational parameters. This MIB is strongly oriented toward hardware and software status monitoring: board temperature vs. its configured limit flags overheating risk, NTP client sync status confirms the device's clock is disciplined for accurate log timestamps, and network-processor version/model data supports software/firmware inventory tracking. It is a self-contained Ericsson enterprise MIB, though it likely complements standard IF-MIB/Q-BRIDGE-MIB style port and VLAN data rather than replacing it. It is deployed on Ericsson ELN Ethernet access nodes in carrier access networks delivering Ethernet services to end customers. Network engineers evaluating or troubleshooting this functionality can download the ERICSSON-ELN-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ERICSSON-ELN-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson ELN (Ethernet Line Node) access device

Monitoring Examples

A NOC engineer would poll elnMainBoardTemperature against elnMainBoardTemperatureLimit to detect an overheating main board before it triggers a thermal shutdown, and would check elnNtpClientStatus/elnNtpServer to confirm the node's clock remains synchronized for accurate event correlation. elnMainBoardRevision and elnMainBoardSerialNo would be pulled during a hardware inventory audit, while elnNetworkProcessorVersion helps confirm which firmware release is running on a given ELN node during a fleet-wide upgrade rollout.

What Can Be Monitored

main board temperature vs limit
NTP client sync status
network processor model/version
board serial number/revision
syslog server configuration
real-time clock status

Imported Objects

From ERICSSON-ELN-SMI

eln	OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE
TimeTicks
mib-2

From SNMPv2-TC

AutonomousType
DateAndTime
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
I32 elnBandwidthLimitationBandWidth	1.3.6.1.4.1.193.109.1.5.1.1.2	Integer32	read-write	The maximum bandwidth, in bits per second, allowed for a service with this rate shape.
INT elnBandwidthLimitationBurstTolerance	1.3.6.1.4.1.193.109.1.5.1.1.3	INTEGER	read-write	The burst tolerance measured in milli-seconds. The value 0 means that the burst tolerance is automatically calculated.
elnBandwidthLimitationEntry	1.3.6.1.4.1.193.109.1.5.1.1		not-accessible	An entry containing management information applicable to a specific bandwidth limitation profile.
INT elnBandwidthLimitationIndex	1.3.6.1.4.1.193.109.1.5.1.1.1	INTEGER	read-only	The bandwidth limitation index.
elnBandwidthLimitationTable	1.3.6.1.4.1.193.109.1.5.1		not-accessible	A list of bandwidth limitation entries.
elnBoardGroup	1.3.6.1.4.1.193.109.1.2
elnConnectionDataEntry	1.3.6.1.4.1.193.109.1.8.1.1		not-accessible	An entry containing management information applicable to specific connection data.
elnConnectionDataGroup	1.3.6.1.4.1.193.109.1.8
OCT elnConnectionDataOption82CircuitId	1.3.6.1.4.1.193.109.1.8.1.1.10	OCTET STRING	read-write	The specified string will be inserted as 'Agent Circuit ID' sub-option 1, see RFC 3046.
INT elnConnectionDataOption82Config	1.3.6.1.4.1.193.109.1.8.1.1.3	INTEGER	read-write	Determines which DHCP Snooping configuration to use. The snooping agent adds DHCP option 82 to upstream DHCP requests, and removes the option 82 from downstream DHCP replies. See also RFC 3046. 0 - notUsed: No relay-agent information will be added or removed from the frames. 1 - remoteIdString: A specified string will be inserted as 'Agent Remote ID'. The parameter relayAgentString has to be set with the string before using this configuration. 2 - remoteIdCisco: Not supported. 3 - remoteIdCustomer: The customer Id will be inserted as Agent Remote ID. The parameter relayAgentString has to be set with the correct customer Id before using this configuration. 4 - circuitIdString: Same as remoteIdString except that it will be encoded in 'Agent Circuit ID'. 5 - circuitIdCustomer: Same as remoteIdCustomer except that it will be encoded in 'Agent Circuit ID'. 6 - remoteIdEda: Not supported. 7 - circuitIdEda: Not supported. 8 - remoteAndCircuitIdFea: 'Agent Remote ID' and 'Agent Circuit ID' will be inserted according to a format specified for FEA.
OCT elnConnectionDataOption82RemoteId	1.3.6.1.4.1.193.109.1.8.1.1.11	OCTET STRING	read-write	The specified string will be inserted as 'Agent Remote ID' sub-option 2, see RFC 3046.
OCT elnConnectionDataOption82String	1.3.6.1.4.1.193.109.1.8.1.1.1	OCTET STRING	read-write	The specified string will be inserted as 'Agent Circuit ID' or 'Agent Remote ID', see RFC 3046.
elnConnectionDataTable	1.3.6.1.4.1.193.109.1.8.1		not-accessible	A list of connection entries.
elnConnectionGroup	1.3.6.1.4.1.193.109.1.6
INT elnConnectionMulticastGroupLimit	1.3.6.1.4.1.193.109.1.8.1.1.4	INTEGER	read-write	Defines the maximum number of active Multicast groups, i.e. the maximum number of parallel channels for this VLAN on this port. The value 0 means that there are no limit.
OCT elnConnectionMulticastWhiteList	1.3.6.1.4.1.193.109.1.8.1.1.5	OCTET STRING	read-write	Multicast groups which are within the range are allowed. If the string is empty all multicast groups are allowed. Each range is 8 bytes. To represent the range >=224.10.10.10 <=224.10.10.40, then add: 0xe0 0x0a 0x0a 0x0a 0xe0 0x0a 0x0a 0x28.
IP elnDynamicIpAddress	1.3.6.1.4.1.193.109.1.8.3.1.1	IpAddress	read-only	Dynamic IP address assigned to VLAN and Port.
elnDynamicIpAddressEntry	1.3.6.1.4.1.193.109.1.8.3.1		not-accessible	An entry containing management information applicable to a specific dynamic ip address.
elnDynamicIpAddressTable	1.3.6.1.4.1.193.109.1.8.3		not-accessible	A list of user port dynamic ip entries.
INT elnEgressConnectionBandwidthLimitation	1.3.6.1.4.1.193.109.1.6.4.1.4	INTEGER	read-create	The bandwidth limitation profile, an index in elnBandwidthLimitationTable. The value 0 implies no bandwidth limitation.
T/F elnEgressConnectionBroadcastAllowed	1.3.6.1.4.1.193.109.1.6.4.1.6	TruthValue	read-create	Defines if Broadcast is allowed for the connection.
STR elnEgressConnectionDescription	1.3.6.1.4.1.193.109.1.6.4.1.1	DisplayString	read-create	A description of the connection.
elnEgressConnectionEntry	1.3.6.1.4.1.193.109.1.6.4.1		not-accessible	An entry containing management information applicable to a specific Port to VLAN connection. an index from the elnPortTable and elnVlanTable.
INT elnEgressConnectionPriorityTag	1.3.6.1.4.1.193.109.1.6.4.1.3	INTEGER	read-create	Defines the P-tag for the connection, priority(0-7), transparent(8). For transparent(8) the ingress tag is used.
INT elnEgressConnectionSecondPriorityTag	1.3.6.1.4.1.193.109.1.6.4.1.8	INTEGER	read-create	Defines the P-tag for the connection, priority(0-7), transparent(8). For transparent(8) the ingress tag is used.
INT elnEgressConnectionSecondTag	1.3.6.1.4.1.193.109.1.6.4.1.7	INTEGER	read-create	Defines the vlan-tag for the connection, untagged(0), tag(1-4095), transparent(4096). for transparent(4096) the ingress tag is used.
ROW elnEgressConnectionStatus	1.3.6.1.4.1.193.109.1.6.4.1.20	RowStatus	read-create	The row status.
elnEgressConnectionTable	1.3.6.1.4.1.193.109.1.6.4		not-accessible	A list of Egress connection entries. An entry is created/removed by using the RowStatus.
INT elnEgressConnectionTag	1.3.6.1.4.1.193.109.1.6.4.1.2	INTEGER	read-create	Defines the vlan-tag for the connection, untagged(0), tag(1-4095), transparent(4096). for transparent(4096) the ingress tag is used.
elnIgmpGroup	1.3.6.1.4.1.193.109.1.7
T/F elnIgmpSnoopingDisconnectOldest	1.3.6.1.4.1.193.109.1.7.4	TruthValue	read-write	Defines the action when the maximum number of active Multicast groups is reached (according elnIgmpSnoopingConnectionMulticastGroupLimit). The value true means disconnect the oldest group and false means reject the new group.
INT elnIgmpSnoopingHostDisconnectTime	1.3.6.1.4.1.193.109.1.7.3	INTEGER	read-write	Maximum timeout value (in seconds) between host membership reports. At expiry the host is removed from the group. A value above 1000000000 is handled as infinite.
INT elnIngressConnectionBandwidthLimitation	1.3.6.1.4.1.193.109.1.6.2.1.5	INTEGER	read-create	The bandwidth limitation profile, an index in elnBandwidthLimitationTable. The value 0 implies no bandwidth limitation.
STR elnIngressConnectionDescription	1.3.6.1.4.1.193.109.1.6.2.1.1	DisplayString	read-create	A description of the connection.
elnIngressConnectionEntry	1.3.6.1.4.1.193.109.1.6.2.1		not-accessible	An entry containing management information applicable to a specific connection. The entry uses the index from elnPortTable and elnVlanTable.
INT elnIngressConnectionFilterProfile	1.3.6.1.4.1.193.109.1.6.2.1.7	INTEGER	read-create	Defines a filter profile for the connection. The value 0 implies no filter profile.
OCT elnIngressConnectionIpDestinations	1.3.6.1.4.1.193.109.1.6.2.1.8	OCTET STRING	read-create	Only IP Packets with these IP Addresses as destinations are directed to this VLAN (Switching Domain). If the string is empty all destinations are directed to the VLAN. Each range is 8 bytes, e.g. to represent the range >=100.10.10.10 <=100.10.10.40, then use: 0x64 0x0a 0x0a 0x0a 0x64 0x0a 0x0a 0x28, an empty string is all zeros.
INT elnIngressConnectionPriority	1.3.6.1.4.1.193.109.1.6.2.1.3	INTEGER	read-create	The priority for the connection.
INT elnIngressConnectionReliability	1.3.6.1.4.1.193.109.1.6.2.1.4	INTEGER	read-create	The reliability for the connection.
elnIngressConnectionSecondTagEntry	1.3.6.1.4.1.193.109.1.6.5.1		not-accessible	An entry containing management information applicable to a specific ingress tag entry.
ROW elnIngressConnectionSecondTagStatus	1.3.6.1.4.1.193.109.1.6.5.1.2	RowStatus	read-create	The row status.
elnIngressConnectionSecondTagTable	1.3.6.1.4.1.193.109.1.6.5		not-accessible	A list of ingress connection tag entries.
INT elnIngressConnectionSecondTagValue	1.3.6.1.4.1.193.109.1.6.5.1.1	INTEGER	read-create	Allowed vlan-tag for the port ingress connection, untagged(0), tag(1-4095), all(4096). If the value is all(4096) there is only one entry for that ingress connection.
ROW elnIngressConnectionStatus	1.3.6.1.4.1.193.109.1.6.2.1.20	RowStatus	read-create	The row status.
elnIngressConnectionTable	1.3.6.1.4.1.193.109.1.6.2		not-accessible	A list of Ingress connection entries. An entry is created/removed by using the RowStatus.
elnIngressConnectionTagEntry	1.3.6.1.4.1.193.109.1.6.3.1		not-accessible	An entry containing management information applicable to a specific ingress tag entry.
ROW elnIngressConnectionTagStatus	1.3.6.1.4.1.193.109.1.6.3.1.2	RowStatus	read-create	The row status.
elnIngressConnectionTagTable	1.3.6.1.4.1.193.109.1.6.3		not-accessible	A list of ingress connection tag entries.
INT elnIngressConnectionTagValue	1.3.6.1.4.1.193.109.1.6.3.1.1	INTEGER	read-create	Allowed vlan-tag for the port ingress connection, untagged(0), tag(1-4095), all(4096). If the value is all(4096) there is only one entry for that ingress connection.
STR elnMainBoardProductNo	1.3.6.1.4.1.193.109.1.2.2	DisplayString	read-only	The main board product number.
STR elnMainBoardRevision	1.3.6.1.4.1.193.109.1.2.3	DisplayString	read-only	The main board revision.
STR elnMainBoardSerialNo	1.3.6.1.4.1.193.109.1.2.4	DisplayString	read-only	The main board serial number.
INT elnMainBoardTemperature	1.3.6.1.4.1.193.109.1.2.5	INTEGER	read-only	The main board temperature in centigrades.
INT elnMainBoardTemperatureLimit	1.3.6.1.4.1.193.109.1.2.6	INTEGER	read-write	The main board temperature limit in centigrades. When the limit is exceeded an 'elnOverheat' trap is sent.
STR elnMainBoardType	1.3.6.1.4.1.193.109.1.2.1	DisplayString	read-only	The main board type.
elnMezzanineBoardEntry	1.3.6.1.4.1.193.109.1.2.7.1		not-accessible	An entry containing management information applicable to a specific mezzanine board.
INT elnMezzanineBoardIndex	1.3.6.1.4.1.193.109.1.2.7.1.1	INTEGER	read-only	The mezzanine board index.
STR elnMezzanineBoardProductNo	1.3.6.1.4.1.193.109.1.2.7.1.3	DisplayString	read-only	The mezzanine board product number.
STR elnMezzanineBoardRevision	1.3.6.1.4.1.193.109.1.2.7.1.4	DisplayString	read-only	The mezzanine board revision.
STR elnMezzanineBoardSerialNo	1.3.6.1.4.1.193.109.1.2.7.1.5	DisplayString	read-only	The mezzanine board serial number.
elnMezzanineBoardTable	1.3.6.1.4.1.193.109.1.2.7		not-accessible	A list of mezzanine board entries.
STR elnMezzanineBoardType	1.3.6.1.4.1.193.109.1.2.7.1.2	DisplayString	read-only	The mezzanine board type.
elnMIB	1.3.6.1.4.1.193.109.1			This MIB module defines ELN parameters for: Network Processor, Main Board, Mezzanine Boards, Host Processor, Ethernet Ports, VLAN, QOS and IGMP
elnNetworkProcessorGroup	1.3.6.1.4.1.193.109.1.1
STR elnNetworkProcessorModel	1.3.6.1.4.1.193.109.1.1.1	DisplayString	read-only	The network processor model.
STR elnNetworkProcessorVersion	1.3.6.1.4.1.193.109.1.1.2	DisplayString	read-only	The network processor version.
INT elnNtpClientStatus	1.3.6.1.4.1.193.109.1.1.4	INTEGER	read-write	Set the mode in which the NTP client will operate. At unicast mode the elnNtpServer must have been set.
OCT elnNtpServer	1.3.6.1.4.1.193.109.1.1.5	OCTET STRING	read-write	The Hostname or IP address of the NTP server. Used when client is in unicast(1) status.
T/F elnPortConfiguredAutoNegotiation	1.3.6.1.4.1.193.109.1.3.4.1.2	TruthValue	read-write	Defines if speed auto negotiation is active or not. No write access for ports with no auto negotiation.
INT elnPortConfiguredDuplex	1.3.6.1.4.1.193.109.1.3.4.1.5	INTEGER	read-write	Defines the configured half or full duplex mode. No write access for ports with fixed duplex mode.
INT elnPortConfiguredSpeed	1.3.6.1.4.1.193.109.1.3.4.1.4	INTEGER	read-write	Defines the configured port speed in Mbits per second. No write access for ports with fixed speed.
INT elnPortConnectionBandwidthLimitationReceive	1.3.6.1.4.1.193.109.1.6.1.1.3	INTEGER	read-create	The bandwidth limitation profile in the receive direction, (the index in the elnBandwidthLimitationTable). The value 0 means no bandwidth limitation.
INT elnPortConnectionBandwidthLimitationTransmit	1.3.6.1.4.1.193.109.1.6.1.1.4	INTEGER	read-create	The bandwidth limitation profile in the transmit direction. (the index in the elnBandwidthLimitationTable). The value 0 means no bandwidth limitation.
STR elnPortConnectionDescription	1.3.6.1.4.1.193.109.1.6.1.1.7	DisplayString	read-create	A description of the Port to VLAN connection.
elnPortConnectionEntry	1.3.6.1.4.1.193.109.1.6.1.1		not-accessible	An entry containing management information applicable to a specific Port to VLAN connection. The entry uses the index from the elnPortTable and elnVlanTable.
INT elnPortConnectionPriority	1.3.6.1.4.1.193.109.1.6.1.1.2	INTEGER	read-create	The priority for the Port to VLAN connection.
ROW elnPortConnectionStatus	1.3.6.1.4.1.193.109.1.6.1.1.8	RowStatus	read-create	The row status.
elnPortConnectionTable	1.3.6.1.4.1.193.109.1.6.1		not-accessible	A list of Port to VLAN connection entries. An entry is created/removed by using the RowStatus.
INT elnPortConnectionVlanTag	1.3.6.1.4.1.193.109.1.6.1.1.9	INTEGER	read-create	Defines the vlan-tag for the connection, untagged(0), tag(1-4095), all(4096). All means all ingress tags are accepted and used transparent for egress.
INT elnPortCrossover	1.3.6.1.4.1.193.109.1.3.4.1.1	INTEGER	read-write	Cable crossover switch. No write access for ports with no crossover switch.
elnPortEntry	1.3.6.1.4.1.193.109.1.3.4.1		not-accessible	An entry containing management information applicable to a specific interface.
elnPortGroup	1.3.6.1.4.1.193.109.1.3
INT elnPortIndex	1.3.6.1.4.1.193.109.1.3.3	INTEGER	read-only
T/F elnPortLinkUpDownTrapEnable	1.3.6.1.4.1.193.109.1.3.4.1.7	TruthValue	read-write	Indicates whether linkUp/linkDown traps should be generated for this interface. By default, this object have the value enabled true.
INT elnPortMediaType	1.3.6.1.4.1.193.109.1.3.4.1.6	INTEGER	read-only	Reports the media type for the port.
INT elnPortPosition	1.3.6.1.4.1.193.109.1.3.4.1.3	INTEGER	read-only	Board position, that is mezzanine board this port is on. An index in the mezzanine table, elnMezzanineBoardIndex. If there ar no mezzanine boards, the port is on the main board, and position 0 is returned.
INT elnPortRedundancyActivePort	1.3.6.1.4.1.193.109.1.3.2	INTEGER	read-only	The port number of the currently active reduntant port. The value 0 if there are no active port.
POR elnPortRedundancyList	1.3.6.1.4.1.193.109.1.3.1	PortList	read-write	The port number list of reduntant ports.
elnPortTable	1.3.6.1.4.1.193.109.1.3.4		not-accessible	A list of interface entries. This table is an extension of the ifTable in the Interface MIB.
elnQosGroup	1.3.6.1.4.1.193.109.1.5
DAT elnRealTimeClock	1.3.6.1.4.1.193.109.1.1.3	DateAndTime	read-write	Date and Time settings.
IP elnStaticIpAddress	1.3.6.1.4.1.193.109.1.8.2.1.1	IpAddress	read-create	Valid source IP adress.
elnStaticIpAddressEntry	1.3.6.1.4.1.193.109.1.8.2.1		not-accessible	An entry containing management information applicable to a specific static ip address.
ROW elnStaticIpAddressStatus	1.3.6.1.4.1.193.109.1.8.2.1.2	RowStatus	read-create	Rowstatus for creation and deletion of rows
elnStaticIpAddressTable	1.3.6.1.4.1.193.109.1.8.2		not-accessible	A list of user port static ip entries.
OCT elnSysLogServer	1.3.6.1.4.1.193.109.1.1.6	OCTET STRING	read-write	The Hostname or IP address of the Syslog server.
INT elnVlanArpAndDhcpTag	1.3.6.1.4.1.193.109.1.4.1.1.11	INTEGER	read-write	The tag for the downstream VLAN from the gateway. The value 0 is used for an untagged VLAN, the value 4096 indicates that the function is not used.
STR elnVlanDescription	1.3.6.1.4.1.193.109.1.4.1.1.7	DisplayString	read-write	The description for the VLAN.
T/F elnVlanDhcpOption82	1.3.6.1.4.1.193.109.1.4.1.1.18	TruthValue	read-write	Determines if DHCP option 82 shall be added to upstream DHCP requests towards a DHCP server. And removed from downstream DHCP replies towards the user, see RFC 3046.
INT elnVlanDhcpOption82N	1.3.6.1.4.1.193.109.1.4.1.1.22	INTEGER	read-write	Determines if DHCP option 82 shall be added to upstream DHCP requests towards a DHCP server, nnd removed from downstream DHCP replies towards the user, see RFC 3046. no(0) implies no option 82, configurable(1) means that the connection data defined for elnConnectionDataOption82CircuitId and/or elnConnectionDataOption82RemoteId are used, vlanPortMac(2) means that a 'predefined' format that includes Vlan, Port, MAC address are used for CircuitId and RemoteId.
elnVlanEntry	1.3.6.1.4.1.193.109.1.4.1.1		not-accessible	An entry containing management information applicable to a specific VLAN.
OCT elnVlanGateway	1.3.6.1.4.1.193.109.1.4.1.1.17	OCTET STRING	read-write	The IP Address or MAC Address of the Gateway for the VLAN. A value of length 4 will be handled as an IP Address, and of length 6 as a MAC Address. Or the string 'A' if the IP/MAC address shall be automatically detected from DHCP messages.
elnVlanGroup	1.3.6.1.4.1.193.109.1.4
INT elnVlanIndex	1.3.6.1.4.1.193.109.1.4.1.1.1	INTEGER	read-only	The index for the VLAN.
IP elnVlanIpAddress	1.3.6.1.4.1.193.109.1.4.1.1.16	IpAddress	read-write	The own IP Address used in ARP messages for the VLAN.
OCT elnVlanIpAddressN	1.3.6.1.4.1.193.109.1.4.1.1.21	OCTET STRING	read-write	The source IP Address to be used in ARP messages for the VLAN. Or the string 'A' if the IP address shall be automatically borrowed from a client IP addresses in the VLAN.
OCT elnVlanMacAddress	1.3.6.1.4.1.193.109.1.4.1.1.20	OCTET STRING	read-write	The source MAC Address to be used in ARP messages for the VLAN. Or the string 'A' if the MAC address shall be automatically borrowed from a client MAC addresses in the VLAN.
T/F elnVlanMacAddressLearning	1.3.6.1.4.1.193.109.1.4.1.1.12	TruthValue	read-write	Defines if MAC address learning is active on the VLAN.
INT elnVlanMaxDynamicIpAddresses	1.3.6.1.4.1.193.109.1.4.1.1.10	INTEGER	read-write	The number of allowed dynamic IP addresses for each Port in this VLAN. The value 65535 implies an infinite number of addresses.
INT elnVlanMaxVirtualMacAddresses	1.3.6.1.4.1.193.109.1.4.1.1.9	INTEGER	read-write	The number of allowed Virtual MAC Addresses for each Port in this VLAN.
INT elnVlanMulticast	1.3.6.1.4.1.193.109.1.4.1.1.19	INTEGER	read-write	Defines if Multicast is allowed on the VLAN.
INT elnVlanSwitchingRule	1.3.6.1.4.1.193.109.1.4.1.1.8	INTEGER	read-write	Defines the switching options to use for the VLAN. 0 - normal switching, 2 - forced forwarding with ip validation, 3 - forced forwarding with ip validation and virtual mac, 4 - source address switching, 5 - broadcast switching.
elnVlanTable	1.3.6.1.4.1.193.109.1.4.1		not-accessible	A list of VLAN entries.
POR elnVlanTaggedPorts	1.3.6.1.4.1.193.109.1.4.1.1.6	PortList	read-only	List of tagged ports in the VLAN.
INT elnVlanTransitlink	1.3.6.1.4.1.193.109.1.4.1.1.15	INTEGER	read-write	The transit link port for the VLAN. The value 0 means that the transit-link is undefined.
POR elnVlanUntaggedPorts	1.3.6.1.4.1.193.109.1.4.1.1.5	PortList	read-only	List of untagged ports in the VLAN.
INT elnVlanUplink	1.3.6.1.4.1.193.109.1.4.1.1.14	INTEGER	read-write	The up link port for the VLAN. The value 0 means that the up-link is undefined.

RFC description

Manages Ericsson Local Node Ethernet switch parameters including VLAN, QoS, IGMP snooping, and processor configuration.

Start monitoring Ericsson ELN (Ethernet Line Node) access device with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ERICSSON-ELN-MIB

What Is ERICSSON-ELN-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description