ERICSSON-ELN-CFG-MIB

All MIBs › ERICSSON-ELN-CFG-MIB

Organization: Ericsson

Last Updated: 2003-04-02

Category: Vendor: Ericsson

Description: Manages configuration parameters for Ericsson ELN (Ethernet Line Node) access network equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ERICSSON-ELN-CFG-MIB?

This is an Ericsson MIB for managing configuration parameters, particularly software handling, on the ELN (Ethernet Line Node), an Ericsson access network equipment product. It exposes software/version configuration data including the currently running software version and its release time, the permanent (backup) software image, and a table of loaded software versions per slot or unit. It also exposes an action mechanism for initiating software loads/upgrades from a remote host via a specified protocol and file, making software version status and upgrade job progress the primary monitoring focus, directly relevant to firmware/software status monitoring on the device. No dependency on another standard MIB is indicated, so it functions as a self-contained Ericsson proprietary MIB. It is deployed on Ericsson ELN access nodes in carrier or enterprise access networks where remote software version tracking and upgrades are managed via SNMP. Engineers can download the ERICSSON-ELN-CFG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ERICSSON-ELN-CFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Ericsson ELN (Ethernet Line Node) access equipment

Monitoring Examples

An administrator would poll elnSoftwareCurrent and elnSoftwareCurrentReleaseTime to confirm which software version is running and when it was installed, and compare it against elnSoftwarePermanent to see if a fallback image differs from the active one after a recent upgrade. Checking elnSoftwareLoadedTable / elnSoftwareLoadedEntry via elnSoftwareLoadedVersion across units, and monitoring elnSoftwareAction with elnSoftwareActionHost/elnSoftwareActionProtocol, lets the admin track an in-progress remote software download and verify it completes as expected.

What Can Be Monitored

current running software version
software release time
permanent/backup software version
loaded software version per unit
software upgrade action/job status

Imported Objects

From ERICSSON-ELN-SMI

eln	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
mib-2

From SNMPv2-TC

AutonomousType
DateAndTime
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
elnCfgMIB	1.3.6.1.4.1.193.109.3			This MIB module defines the parameters for Software handling in the ELN
elnSoftwareGroup	1.3.6.1.4.1.193.109.3.1
STR elnSoftwareCurrent	1.3.6.1.4.1.193.109.3.1.1	DisplayString	read-only	The version of the currently running software.
DAT elnSoftwareCurrentReleaseTime	1.3.6.1.4.1.193.109.3.1.2	DateAndTime	read-only	The release time of the currently running software.
STR elnSoftwarePermanent	1.3.6.1.4.1.193.109.3.1.3	DisplayString	read-write	The software version which is permanent, i.e. the one that is applied at reboot
elnSoftwareLoadedTable	1.3.6.1.4.1.193.109.3.1.4		not-accessible	A list of loaded software entries.
elnSoftwareLoadedEntry	1.3.6.1.4.1.193.109.3.1.4.1		not-accessible	An entry containing information applicable to loaded software.
INT elnSoftwareLoadedIndex	1.3.6.1.4.1.193.109.3.1.4.1.1	INTEGER	read-only	The software loaded index.
STR elnSoftwareLoadedVersion	1.3.6.1.4.1.193.109.3.1.4.1.2	DisplayString	read-only	The software version.
INT elnSoftwareAction	1.3.6.1.4.1.193.109.3.1.5	INTEGER	read-write	loadRelease(1) downloads a release specified by a URL (or File, Host, Protocol, User, Password) startRelease(2) makes the node restart with a named Version makePermanent(3) makes the named Version permanent, i.e. the default release used at reboot removeRelease(4) removes a Version (must not be running) The results of the loadRelease(1) and removeRelease(4) actions are availabe in the elnSoftwareActionStatus object, all other results are directly returned. The parameters for the action must be set before or in the same SNMP-SET as the action.
STR elnSoftwareActionVersion	1.3.6.1.4.1.193.109.3.1.6	DisplayString	read-write	The version of the software. Required for startRelease(2), makePermanent(3) and removeRelease(4).
STR elnSoftwareActionFile	1.3.6.1.4.1.193.109.3.1.7	DisplayString	read-write	THIS OBJECT IS DEPRECATED use elnSoftwareActionURL.
OCT elnSoftwareActionHost	1.3.6.1.4.1.193.109.3.1.8	OCTET STRING	read-write	THIS OBJECT IS DEPRECATED use elnSoftwareActionURL.
INT elnSoftwareActionProtocol	1.3.6.1.4.1.193.109.3.1.9	INTEGER	read-write	THIS OBJECT IS DEPRECATED use elnSoftwareActionURL.
STR elnSoftwareActionUser	1.3.6.1.4.1.193.109.3.1.10	DisplayString	read-write	THIS OBJECT IS DEPRECATED use elnSoftwareActionURL.
STR elnSoftwareActionPassword	1.3.6.1.4.1.193.109.3.1.11	DisplayString	read-write	THIS OBJECT IS DEPRECATED use elnSoftwareActionURL.
INT elnSoftwareActionStatus	1.3.6.1.4.1.193.109.3.1.12	INTEGER	read-only	The status of the current 'loadRelease' or 'removeRelease' software action.
STR elnSoftwareActionURL	1.3.6.1.4.1.193.109.3.1.13	URLString	read-write	The location of the file to be downloaded, e.g. 'ftp://user:password@host/file', 'tftp://host/file'. Required for the loadRelease(1) action.
INT elnSoftwareActionMaxTime	1.3.6.1.4.1.193.109.3.1.14	INTEGER	read-write	The maximum time (in seconds), for the loadRelease(1) action. This is an optional parameter, a default time is used otherwise.
INT elnSoftwareLoadReleaseProgress	1.3.6.1.4.1.193.109.3.1.15	INTEGER	read-only	The progress in percent of the current 'loadRelease' software action.
elnConfigGroup	1.3.6.1.4.1.193.109.3.2
STR elnConfigPermanent	1.3.6.1.4.1.193.109.3.2.1	DisplayString	read-only	The version of the permanent configuration.
elnConfigTable	1.3.6.1.4.1.193.109.3.2.2		not-accessible	A list of configuration entries.
elnConfigEntry	1.3.6.1.4.1.193.109.3.2.2.1		not-accessible	An entry containing information applicable to a specific configuration.
INT elnConfigIndex	1.3.6.1.4.1.193.109.3.2.2.1.1	INTEGER	read-only	The configuration index.
STR elnConfigName	1.3.6.1.4.1.193.109.3.2.2.1.2	DisplayString	read-only	The configuration name.
INT elnConfigAction	1.3.6.1.4.1.193.109.3.2.3	INTEGER	read-write	save(1) saves the current configuration as Name restore(2) applies the named configuration, (all previous configurations are removed first) remove(3) deletes the named configuration (if it is permanent it can not be removed) makePermanent(4) makes the named configuration permanent (the one that is applied at reboot) removePermanent(5) the permanent configuration is made non-permanent copyAllToVersion(6) copies all configurations from the current release to a named release copyFromRemote(7) copies one configuration from a URL to the current release and a local name copyFromRemoteToVersion(8) copies one configuration from a URL to a release and local name copyToRemote(9) copies one configuration from the current relase and local name to a URL copyToRemoteFromVersion(10) copies one configuration from a release and local name to a URL The results from the copy(7..10) actions is availabe from elnConfigActionStatus, all other results are directly returned. The parameters for the action must be set before or in the same SNMP-SET as the action.
STR elnConfigActionName	1.3.6.1.4.1.193.109.3.2.4	DisplayString	read-write	This is used by the action when refering to the name of a local Configuration. This corresponds to elnConfigName in elnConfigTable.
STR elnConfigActionVersion	1.3.6.1.4.1.193.109.3.2.5	DisplayString	read-write	This is used by the action when refering to a Release. This corresponds to elnSoftwareLoadedVersion in elnSoftwareLoadedTable.
STR elnConfigActionURL	1.3.6.1.4.1.193.109.3.2.6	URLString	read-write	This is used by the action when refering to a URL. e.g. 'ftp://user:password@host/file', 'tftp://host/file'.
INT elnConfigActionStatus	1.3.6.1.4.1.193.109.3.2.7	INTEGER	read-only	The status of the current copy action.
STR elnConfigCurrent	1.3.6.1.4.1.193.109.3.2.8	DisplayString	read-only	The version of the currently used configuration.
elnHostProcessorGroup	1.3.6.1.4.1.193.109.3.3
IP elnHostIpAddress	1.3.6.1.4.1.193.109.3.3.1	IpAddress	read-write	The IP Address for the Host.
IP elnHostNetmask	1.3.6.1.4.1.193.109.3.3.2	IpAddress	read-write	The IP Netmask for the Host.
IP elnHostGateway	1.3.6.1.4.1.193.109.3.3.3	IpAddress	read-write	The IP Address for the Gateway.
STR elnHostDnsDomain	1.3.6.1.4.1.193.109.3.3.4	DisplayString	read-write	The IP Address for the primary DNS.
IP elnHostPrimaryDns	1.3.6.1.4.1.193.109.3.3.5	IpAddress	read-write	The IP Address for the primary DNS.
IP elnHostSecondaryDns	1.3.6.1.4.1.193.109.3.3.6	IpAddress	read-write	The IP Address for the secondary DNS.
T/F elnHostCommit	1.3.6.1.4.1.193.109.3.3.10	TruthValue	read-write	The values for Ip Address, Netmask and Gateway have been set, validated and accepted. But the values must be commited by setting this parameter to 'true' before they are applied on the host.
elnResetGroup	1.3.6.1.4.1.193.109.3.4
INT elnResetAction	1.3.6.1.4.1.193.109.3.4.1	INTEGER	read-write	resetAll(1) resets all resources (to default values), resetAllExceptManagementVlan(2) resets all resources except management vlan, i.e. host_port, cpu, management vlan and ports connected to management vlan.

RFC description

Ericsson Local Node Ethernet switch MIB for managing software handling and system configuration.

Start monitoring Ericsson ELN (Ethernet Line Node) access equipment (software version/upgrade) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ERICSSON-ELN-CFG-MIB

What Is ERICSSON-ELN-CFG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description