All MIBs › ENGENIUS-MESH-MIB
Organization: Senao Networks, Inc.
Last Updated: 2008-03-07
Category: Domain: Wireless, Vendor: EnGenius, Wireless and WLAN
Description: EnGenius wireless mesh MIB for managing mesh network topology, link status, and routing on EnGenius access points.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is ENGENIUS-MESH-MIB?
ENGENIUS-MESH-MIB is a vendor-private MIB from EnGenius Technologies for managing and monitoring wireless mesh network topology on EnGenius access points running mesh firmware. It exposes general system status objects alongside mesh-specific node status and configuration objects, and a set of trap variables used for event notifications. Its monitoring emphasis is on device hardware/software health and mesh event alerting: systemUptime and systemMemory expose basic hardware/software health (how long the AP has been running and its current memory consumption), while genericTrapVariable-family objects carry contextual details (MAC address, host IP, hostname, interface, wireless card, Ethernet port) for mesh-related traps such as node join/leave or link change events. As a proprietary enterprise MIB it has no dependency on a standard mesh-networking MIB, though it complements standard interface/IP MIBs typically also present on the device. It is deployed on EnGenius outdoor and indoor mesh access points forming self-healing wireless backhaul networks. Engineers can download the ENGENIUS-MESH-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in ENGENIUS-MESH-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- EnGenius wireless mesh access point
Monitoring Examples
An administrator can poll systemUptime and systemMemory to catch an AP that has unexpectedly rebooted or is running low on free memory, and read systemDevicename and systemCheckingState to confirm the unit's identity and current health-check status within the mesh. When a mesh event occurs, the device emits a trap carrying genericTrapVarMACAddress, genericTrapVarHostIPAddress, genericTrapVarInterface, and genericTrapVarWirelessCard, letting the NMS pinpoint which node and radio was involved in, for example, a mesh link drop. nodeStatus and nodeConfiguration branches would then be walked to check the affected node's current mesh role and settings.
What Can Be Monitored
- system uptime
- system memory usage
- device name
- system checking/health state
- mesh node status
- mesh event trap details (MAC, IP, interface, wireless card)
This MIB depends on
Related MIBs
Imported Objects
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From RFC1213-MIB
| ifIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| enterprises |
From SNMPv2-TC
| DateAndTime | |
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TimeInterval | |
| TimeStamp | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using systemMemory OID:
Select an EnGenius wireless mesh access point as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type systemMemory into the Find box to locate it in the OID tree, then select it and click OK. This object represent the percentage of the system free memory. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the percentage drops below roughly 10-15% (this object reports percent *free*, not percent used), since that indicates the device is running low on memory. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| engenius | 1.3.6.1.4.1.14125 | |||
| engeniusmesh | 1.3.6.1.4.1.14125.1 | MIB Definition used in the Engenius Mesh Product Line: iso(1).org(3).dod(6).internet(1).private(4).enterprises(1). engenius(14125).engeniusmesh(1) | ||
| nodeStatus | 1.3.6.1.4.1.14125.1.1 | |||
| nodeStatusSystem | 1.3.6.1.4.1.14125.1.1.1 | |||
| STR systemUptime | 1.3.6.1.4.1.14125.1.1.1.1 | DisplayString | read-only | This object represents the value of sysUpTime from the time the station entered its current operational state. |
| I32 systemMemoryEx | 1.3.6.1.4.1.14125.1.1.1.2 | Integer32 | read-only | This object represent the percentage of the system free memory. |
| STR systemDevicename | 1.3.6.1.4.1.14125.1.1.1.3 | DisplayString | read-only | This object represents the name of the system device. |
| STR systemCheckingState | 1.3.6.1.4.1.14125.1.1.1.4 | DisplayString | read-only | Check is dorado system |
| nodeStatusTrap | 1.3.6.1.4.1.14125.1.1.2 | |||
| trapVariable | 1.3.6.1.4.1.14125.1.1.2.1 | |||
| STR genericTrapVariable | 1.3.6.1.4.1.14125.1.1.2.1.1 | DisplayString | read-only | This object is used to provide additional information on traps. |
| MAC genericTrapVarMACAddress | 1.3.6.1.4.1.14125.1.1.2.1.2 | MacAddress | read-only | This object is used to store the MAC address of the device that has sent a trap. |
| IP genericTrapVarHostIPAddress | 1.3.6.1.4.1.14125.1.1.2.1.3 | IpAddress | read-only | This object is used to store the IP Address of the Host. |
| STR genericTrapVarHostname | 1.3.6.1.4.1.14125.1.1.2.1.4 | DisplayString | read-only | This object is used to store the hostname of the system. |
| I32 genericTrapVarInterface | 1.3.6.1.4.1.14125.1.1.2.1.5 | Integer32 | read-only | This object is used to store the interface number. |
| INT genericTrapVarWirelessCard | 1.3.6.1.4.1.14125.1.1.2.1.6 | INTEGER | read-only | This object is used to determine on which Wireless Card, Card A or Card B, a wireless TRAP has occured on. |
| INT genericTrapVarEthernetPort | 1.3.6.1.4.1.14125.1.1.2.1.7 | INTEGER | read-only | This object is used to determine on which ethernet port, port A or port B, a TRAP has occured on. |
| I32 genericTrapVarCount | 1.3.6.1.4.1.14125.1.1.2.1.8 | Integer32 | read-only | This object is used to store the number of occurance of certain events. |
| adminTraps | 1.3.6.1.4.1.14125.1.1.2.2 | This is the administrator related trap group. | ||
| NTF adminTrapsAdminConf | 1.3.6.1.4.1.14125.1.1.2.2.1 | This traps is generated when the administrator configures any of the web configuration page. Trap Severity Level: Informative. | ||
| NTF adminTrapsAdminCmd | 1.3.6.1.4.1.14125.1.1.2.2.2 | This traps is generated when the administrator initiate an command. Trap Severity Level: Informative. | ||
| userTraps | 1.3.6.1.4.1.14125.1.1.2.3 | This is the user related trap group. | ||
| NTF userTrapsUserLogin | 1.3.6.1.4.1.14125.1.1.2.3.1 | This traps is generated when a user login to the network. Trap Severity Level: Informative. | ||
| NTF userTrapsUserLogout | 1.3.6.1.4.1.14125.1.1.2.3.2 | This trap is generated when a user logout from the network. Trap Severity Level: Informative. | ||
| systemTraps | 1.3.6.1.4.1.14125.1.1.2.4 | This is the system related trap/notification group. | ||
| NTF systemTrapsSystemReboot | 1.3.6.1.4.1.14125.1.1.2.4.1 | This trap is generated when the system is down to reboot. Trap Severity Level: Major. | ||
| NTF systemTrapsSystemRestore | 1.3.6.1.4.1.14125.1.1.2.4.2 | This trap is generated the default configuration of the system is restored. Trap Severity Level: Major. | ||
| NTF systemTrapsSystemUpgrade | 1.3.6.1.4.1.14125.1.1.2.4.3 | This trap is generated when the firmware of the system is upgraded. Trap Severity Level: Major. | ||
| NTF systemTrapsSystemConf | 1.3.6.1.4.1.14125.1.1.2.4.4 | This trap is generated when the configuration of the system is upgraded. Trap Severity Level: Major. | ||
| NTF systemTrapsSystemStatus | 1.3.6.1.4.1.14125.1.1.2.4.5 | This trap is generated when any changes occur to the system, like memory, firmware, etc. Trap Severity Level: Minor. | ||
| nodeConfiguration | 1.3.6.1.4.1.14125.1.2 | |||
| nodeConfigurationSystem | 1.3.6.1.4.1.14125.1.2.1 | |||
| STR systemName | 1.3.6.1.4.1.14125.1.2.1.1 | DisplayString | read-write | The name of the managed device |
| STR systemLocation | 1.3.6.1.4.1.14125.1.2.1.2 | DisplayString | read-write | The location name of the managed device |
| STR systemContactName | 1.3.6.1.4.1.14125.1.2.1.3 | DisplayString | read-write | The name of the contact person who manages the device |
| STR systemContactMail | 1.3.6.1.4.1.14125.1.2.1.4 | DisplayString | read-write | The Email Address of the contact person who manages the device |
| STR systemContactPhone | 1.3.6.1.4.1.14125.1.2.1.5 | DisplayString | read-write | The contact number of the contact person who manages the device |
| STR systemDescription | 1.3.6.1.4.1.14125.1.2.1.6 | DisplayString | read-write | A short description regarding the managed device |
| STR systemObjectid | 1.3.6.1.4.1.14125.1.2.1.7 | DisplayString | read-only | The object id of the system |
| INT systemOperatemode | 1.3.6.1.4.1.14125.1.2.1.8 | INTEGER | read-write | Define the mode of the system/device |
| I32 systemUpdateMode | 1.3.6.1.4.1.14125.1.2.1.9 | Integer32 | read-write | SnmpSet to update the system firmware when mode is changed. |
| nodeConfigurationEthernet | 1.3.6.1.4.1.14125.1.2.2 | |||
| ethernetInterfaceTable | 1.3.6.1.4.1.14125.1.2.2.1 | not-accessible | This table contains the information of the ethernet interfaces. | |
| ethernetInterfaceTableEntry | 1.3.6.1.4.1.14125.1.2.2.1.1 | not-accessible | Represent the entry in the Ethernet Interface table. | |
| I32 ethInterfaceTableIndex | 1.3.6.1.4.1.14125.1.2.2.1.1.1 | Integer32 | not-accessible | Specify the index of the Ethernet interface table. |
| OCT ethInterfaceTableName | 1.3.6.1.4.1.14125.1.2.2.1.1.2 | OCTET STRING | read-create | The name of the ethernet interface. |
| OCT ethInterfaceTableBase | 1.3.6.1.4.1.14125.1.2.2.1.1.3 | OCTET STRING | read-create | The base name of the ethernet interface. |
| MAC ethInterfaceTableMac | 1.3.6.1.4.1.14125.1.2.2.1.1.4 | MacAddress | read-create | The hardware address of the interface. |
| OCT ethInterfaceTableBridge | 1.3.6.1.4.1.14125.1.2.2.1.1.5 | OCTET STRING | read-create | The bridge interface that the current ethernet interface is attached to. |
| I32 ethInterfaceTableBridgeCost | 1.3.6.1.4.1.14125.1.2.2.1.1.6 | Integer32 | read-create | The cost of the bridge interface that the current ethernet interface is attached to. |
| I32 ethInterfaceTableBridgePrio | 1.3.6.1.4.1.14125.1.2.2.1.1.7 | Integer32 | read-create | The priority of the bridge interface that the current ethernet interface is attached to. |
| STR ethInterfaceTableComments | 1.3.6.1.4.1.14125.1.2.2.1.1.8 | DisplayString | read-create | An optional comment associated to entry of the ethernet interface table. |
| INT ethInterfaceTableActive | 1.3.6.1.4.1.14125.1.2.2.1.1.9 | INTEGER | read-create | The status of the Ethernet interface table entry. |
| ROW ethInterfaceTableRowStatus | 1.3.6.1.4.1.14125.1.2.2.1.1.10 | RowStatus | read-create | The row status in the Ethernet interface table entry |
| nodeConfigurationWireless | 1.3.6.1.4.1.14125.1.2.3 | |||
| wirelessInterfaceTable | 1.3.6.1.4.1.14125.1.2.3.1 | not-accessible | This table contains the information of the Wireless interfaces. | |
| wirelessInterfaceTableEntry | 1.3.6.1.4.1.14125.1.2.3.1.1 | not-accessible | Represent the entry in the Wireless interface table. | |
| I32 wlanInterfaceTableIndex | 1.3.6.1.4.1.14125.1.2.3.1.1.1 | Integer32 | not-accessible | Specify the index of the Wireless interface table. |
| OCT wlanInterfaceTableName | 1.3.6.1.4.1.14125.1.2.3.1.1.2 | OCTET STRING | read-create | The name of the Wireless interface. |
| OCT wlanInterfaceTableBase | 1.3.6.1.4.1.14125.1.2.3.1.1.3 | OCTET STRING | read-create | The base name of the Wireless interface. |
| OCT wlanInterfaceTableBridge | 1.3.6.1.4.1.14125.1.2.3.1.1.4 | OCTET STRING | read-create | The bridge interface that the current wireless interface is attached to. |
| I32 wlanInterfaceTableBridgeCost | 1.3.6.1.4.1.14125.1.2.3.1.1.5 | Integer32 | read-create | The cost of the bridge interface that the current wireless interface is attached to. |
| I32 wlanInterfaceTableBridgePrio | 1.3.6.1.4.1.14125.1.2.3.1.1.6 | Integer32 | read-create | The priority of the bridge interface that the current wireless interface is attached to. |
| INT wlanInterfaceTableMode | 1.3.6.1.4.1.14125.1.2.3.1.1.7 | INTEGER | read-create | The operating mode of the wireless interface. |
| INT wlanInterfaceTableBand | 1.3.6.1.4.1.14125.1.2.3.1.1.8 | INTEGER | read-create | The Operating band of the wireless interface. |
| STR wlanInterfaceTableEssid | 1.3.6.1.4.1.14125.1.2.3.1.1.9 | DisplayString | read-create | The Essid of the wireless interface table entry. |
| I32 wlanInterfaceTableFreq | 1.3.6.1.4.1.14125.1.2.3.1.1.10 | Integer32 | read-create | The operating frequency of the wireless interface. |
| MAC wlanInterfaceTableMac | 1.3.6.1.4.1.14125.1.2.3.1.1.11 | MacAddress | read-create | The hardware address of the interface. |
| INT wlanInterfaceTableSecurity | 1.3.6.1.4.1.14125.1.2.3.1.1.12 | INTEGER | read-create | The security mode of the wireless interface entry. |
| INT wlanInterfaceTableWpaType | 1.3.6.1.4.1.14125.1.2.3.1.1.13 | INTEGER | read-create | The WPA Type of the wireless interface using. |
| INT wlanInterfaceTableDot1x | 1.3.6.1.4.1.14125.1.2.3.1.1.14 | INTEGER | read-create | Enable the radius server as authenticator for the current wireless interface entry. |
| OCT wlanInterfaceTableEncryptionKey | 1.3.6.1.4.1.14125.1.2.3.1.1.15 | OCTET STRING | read-create | The key used with WEP encryption. |
| INT wlanInterfaceTableBroadcastSsid | 1.3.6.1.4.1.14125.1.2.3.1.1.16 | INTEGER | read-create | Enable or disable broadcast ESSID. |
| I32 wlanInterfaceTableBeaconInt | 1.3.6.1.4.1.14125.1.2.3.1.1.17 | Integer32 | read-create | The beacon interval in mili seconds. |
| I32 wlanInterfaceTableRtsThreshold | 1.3.6.1.4.1.14125.1.2.3.1.1.18 | Integer32 | read-create | The RTS Threshold. |
| I32 wlanInterfaceTableFragThreshold | 1.3.6.1.4.1.14125.1.2.3.1.1.19 | Integer32 | read-create | The Fragment Threshold (Even Number only). |
| I32 wlanInterfaceTableDtimInterval | 1.3.6.1.4.1.14125.1.2.3.1.1.20 | Integer32 | read-create | The DTIM interval. |
| I32 wlanInterfaceTableDatarate | 1.3.6.1.4.1.14125.1.2.3.1.1.21 | Integer32 | read-create | The Data rate, available choice are auto(0), 1, 2, 5, 6, 9, 11, 12, 18, 24, 36, 48 and 54. |
| INT wlanInterfaceTableDiversity | 1.3.6.1.4.1.14125.1.2.3.1.1.22 | INTEGER | read-create | Select to enable or disable the diversity of the antenna. |
| INT wlanInterfaceTableTxAntenna | 1.3.6.1.4.1.14125.1.2.3.1.1.23 | INTEGER | read-create | Select the type of the transmission antenna. |
| INT wlanInterfaceTableRxAntenna | 1.3.6.1.4.1.14125.1.2.3.1.1.24 | INTEGER | read-create | Select the type of the receiving antenna. |
| I32 wlanInterfaceTableCrntTxPower | 1.3.6.1.4.1.14125.1.2.3.1.1.25 | Integer32 | read-create | The current Transmit Power level in dBm of the device wireless card. |
| I32 wlanInterfaceTableTxPower | 1.3.6.1.4.1.14125.1.2.3.1.1.26 | Integer32 | read-create | The Transmit Power level in dBm (0-27) of the wireless card, where 9999 indicates MAX value of the card. |
| INT wlanInterfaceTableSeperation | 1.3.6.1.4.1.14125.1.2.3.1.1.27 | INTEGER | read-create | Enable or disable wireless seperation. |
| STR wlanInterfaceTableComments | 1.3.6.1.4.1.14125.1.2.3.1.1.28 | DisplayString | read-create | An optional comment associated to entry of the wireless interface table. |
| INT wlanInterfaceTableActive | 1.3.6.1.4.1.14125.1.2.3.1.1.29 | INTEGER | read-create | The status of the Wireless interface table entry. |
| ROW wlanInterfaceTableRowStatus | 1.3.6.1.4.1.14125.1.2.3.1.1.30 | RowStatus | read-create | The row status in the Wireless interface table entry |
| wirelessFrequencyMeshTable | 1.3.6.1.4.1.14125.1.2.3.2 | not-accessible | This table display the available frequency channel of the Wireless Mesh interface. | |
| wirelessFrequencyMeshTableEntry | 1.3.6.1.4.1.14125.1.2.3.2.1 | not-accessible | Represent the entry in the Wireless Mesh frequency table. | |
| I32 wlanFrequencyMeshTableIndex | 1.3.6.1.4.1.14125.1.2.3.2.1.1 | Integer32 | not-accessible | Specify the index of the Wireless Mesh interface table. |
| I32 wlanFrequencyMeshTableChannel | 1.3.6.1.4.1.14125.1.2.3.2.1.2 | Integer32 | read-only | The channel number of the frequency. |
| OCT wlanFrequencyMeshTableFrequency | 1.3.6.1.4.1.14125.1.2.3.2.1.3 | OCTET STRING | read-only | The frequency level in Giga Hertz. |
| ROW wlanFrequencyMeshTableRowStatus | 1.3.6.1.4.1.14125.1.2.3.2.1.4 | RowStatus | read-only | The row status in the Wireless Mesh frequency table entry |
| wirelessFrequencyAp0Table | 1.3.6.1.4.1.14125.1.2.3.3 | not-accessible | This table display the available frequency channel of the wireless access point radio 1 card. | |
| wirelessFrequencyAp0TableEntry | 1.3.6.1.4.1.14125.1.2.3.3.1 | not-accessible | Represent the entry in the Wireless radio 1 frequency table. | |
| I32 wlanFrequencyAp0TableIndex | 1.3.6.1.4.1.14125.1.2.3.3.1.1 | Integer32 | not-accessible | Specify the index of the Wireless radio 1 interface table. |
| I32 wlanFrequencyAp0TableChannel | 1.3.6.1.4.1.14125.1.2.3.3.1.2 | Integer32 | read-only | The channel number of the frequency. |
| OCT wlanFrequencyAp0TableFrequency | 1.3.6.1.4.1.14125.1.2.3.3.1.3 | OCTET STRING | read-only | The frequency level in Giga Hertz. |
| ROW wlanFrequencyAp0TableRowStatus | 1.3.6.1.4.1.14125.1.2.3.3.1.4 | RowStatus | read-only | The row status in the Wireless radio 1 frequency table entry |
| wirelessFrequencyAp1Table | 1.3.6.1.4.1.14125.1.2.3.4 | not-accessible | This table display the available frequency channel of the wireless access point radio 2 (if exist). | |
| wirelessFrequencyAp1TableEntry | 1.3.6.1.4.1.14125.1.2.3.4.1 | not-accessible | Represent the entry in the Wireless radio 2 frequency table. | |
| I32 wlanFrequencyAp1TableIndex | 1.3.6.1.4.1.14125.1.2.3.4.1.1 | Integer32 | not-accessible | Specify the index of the Wireless radio 2 interface table. |
| I32 wlanFrequencyAp1TableChannel | 1.3.6.1.4.1.14125.1.2.3.4.1.2 | Integer32 | read-only | The channel number of the frequency. |
| OCT wlanFrequencyAp1TableFrequency | 1.3.6.1.4.1.14125.1.2.3.4.1.3 | OCTET STRING | read-only | The frequency level in Giga Hertz. |
| ROW wlanFrequencyAp1TableRowStatus | 1.3.6.1.4.1.14125.1.2.3.4.1.4 | RowStatus | read-only | The row status in the Wireless radio 2 frequency table entry |
| nodeConfigurationVlan | 1.3.6.1.4.1.14125.1.2.4 | |||
| vlanInterfaceTable | 1.3.6.1.4.1.14125.1.2.4.1 | not-accessible | This table contains the information of the VLAN interfaces. | |
| vlanInterfaceTableEntry | 1.3.6.1.4.1.14125.1.2.4.1.1 | not-accessible | Represent the entry in the VLAN interface table. | |
| I32 vlanInterfaceTableIndex | 1.3.6.1.4.1.14125.1.2.4.1.1.1 | Integer32 | not-accessible | Specify the index of the VLAN interface table. |
| OCT vlanInterfaceTableName | 1.3.6.1.4.1.14125.1.2.4.1.1.2 | OCTET STRING | read-create | The name of the VLAN interface. |
| OCT vlanInterfaceTableBase | 1.3.6.1.4.1.14125.1.2.4.1.1.3 | OCTET STRING | read-create | The base name of the VLAN interface. |
| MAC vlanInterfaceTableMac | 1.3.6.1.4.1.14125.1.2.4.1.1.4 | MacAddress | read-create | The hardware address of the interface. |
| I32 vlanInterfaceTableId | 1.3.6.1.4.1.14125.1.2.4.1.1.5 | Integer32 | read-create | The VLAN ID for the table entry. |
| OCT vlanInterfaceTableBridge | 1.3.6.1.4.1.14125.1.2.4.1.1.6 | OCTET STRING | read-create | The bridge interface that the current VLAN interface is attached to. |
| I32 vlanInterfaceTableBridgeCost | 1.3.6.1.4.1.14125.1.2.4.1.1.7 | Integer32 | read-create | The cost of the bridge interface that the current VLAN interface is attached to. |
| I32 vlanInterfaceTableBridgePrio | 1.3.6.1.4.1.14125.1.2.4.1.1.8 | Integer32 | read-create | The priority of the bridge interface that the current VLAN interface is attached to. |
| STR vlanInterfaceTableComments | 1.3.6.1.4.1.14125.1.2.4.1.1.9 | DisplayString | read-create | An optional comment associated to entry of the VLAN interface table. |
| INT vlanInterfaceTableActive | 1.3.6.1.4.1.14125.1.2.4.1.1.10 | INTEGER | read-create | The status of the VLAN interface table entry. |
| ROW vlanInterfaceTableRowStatus | 1.3.6.1.4.1.14125.1.2.4.1.1.11 | RowStatus | read-create | The row status in the VLAN interface table entry |
| nodeConfigurationBridge | 1.3.6.1.4.1.14125.1.2.5 | |||
| bridgeInterfaceTable | 1.3.6.1.4.1.14125.1.2.5.1 | not-accessible | This table contains the information of the bridge interfaces. | |
| bridgeInterfaceTableEntry | 1.3.6.1.4.1.14125.1.2.5.1.1 | not-accessible | Represent the entry in the Bridge Interface table. | |
| I32 bridgeInterfaceTableIndex | 1.3.6.1.4.1.14125.1.2.5.1.1.1 | Integer32 | not-accessible | Specify the index of the Bridge interface table. |
| OCT bridgeInterfaceTableName | 1.3.6.1.4.1.14125.1.2.5.1.1.2 | OCTET STRING | read-create | The name of the Bridge interface. |
| MAC bridgeInterfaceTableMac | 1.3.6.1.4.1.14125.1.2.5.1.1.3 | MacAddress | read-create | The hardware address of the interface. |
| I32 bridgeInterfaceTableAge | 1.3.6.1.4.1.14125.1.2.5.1.1.4 | Integer32 | read-create | The bridge ageing time. |
| I32 bridgeInterfaceTablePrio | 1.3.6.1.4.1.14125.1.2.5.1.1.5 | Integer32 | read-create | The priority of the bridge interface. |
| I32 bridgeInterfaceTableFwdDelay | 1.3.6.1.4.1.14125.1.2.5.1.1.6 | Integer32 | read-create | The bridge forwarding delay. |
| I32 bridgeInterfaceTableHelloInt | 1.3.6.1.4.1.14125.1.2.5.1.1.7 | Integer32 | read-create | The Hello Interval of the bridge interface. |
| I32 bridgeInterfaceTableMaxAge | 1.3.6.1.4.1.14125.1.2.5.1.1.8 | Integer32 | read-create | The bridge maximum message age. |
| INT bridgeInterfaceTableStp | 1.3.6.1.4.1.14125.1.2.5.1.1.9 | INTEGER | read-create | Turn on or off the Spanning Tree Protocol. |
| STR bridgeInterfaceTableComments | 1.3.6.1.4.1.14125.1.2.5.1.1.10 | DisplayString | read-create | An optional comment associated to entry of the bridge interface table. |
| INT bridgeInterfaceTableActive | 1.3.6.1.4.1.14125.1.2.5.1.1.11 | INTEGER | read-create | The status of the bridge interface table entry. |
| ROW bridgeInterfaceTableRowStatus | 1.3.6.1.4.1.14125.1.2.5.1.1.12 | RowStatus | read-create | The row status in the Bridge interface table entry. |
| nodeConfigurationIpaddress | 1.3.6.1.4.1.14125.1.2.6 | |||
| ipAddressesTable | 1.3.6.1.4.1.14125.1.2.6.1 | not-accessible | This table contains the information of the IP Addresses. | |
| ipAddressesTableEntry | 1.3.6.1.4.1.14125.1.2.6.1.1 | not-accessible | Represent the entry in the IP Address Table. | |
| I32 ipAddressesTableIndex | 1.3.6.1.4.1.14125.1.2.6.1.1.1 | Integer32 | not-accessible | Specify the index of the IP Address table. |
| OCT ipAddressesTableIface | 1.3.6.1.4.1.14125.1.2.6.1.1.2 | OCTET STRING | read-create | The name of the interface. |
| INT ipAddressesTableType | 1.3.6.1.4.1.14125.1.2.6.1.1.3 | INTEGER | read-create | The type of IP Address: Static or DHCP. |
| IP ipAddressesTableIp | 1.3.6.1.4.1.14125.1.2.6.1.1.4 | IpAddress | read-create | The IP Address. |
| IP ipAddressesTableNetmask | 1.3.6.1.4.1.14125.1.2.6.1.1.5 | IpAddress | read-create | The Netmask for IP Address. |
| IP ipAddressesTableBroadcast | 1.3.6.1.4.1.14125.1.2.6.1.1.6 | IpAddress | read-create | The Broadcast IP for the IP Address. |
| IP ipAddressesTableGateway | 1.3.6.1.4.1.14125.1.2.6.1.1.7 | IpAddress | read-create | The Gateway IP for the IP Address. |
| INT ipAddressesTableRouted | 1.3.6.1.4.1.14125.1.2.6.1.1.8 | INTEGER | read-create | The type of the IP Address table entry. |
| STR ipAddressesTableComments | 1.3.6.1.4.1.14125.1.2.6.1.1.9 | DisplayString | read-create | An optional comment associated to entry of the IP Address table. |
| INT ipAddressesTableActive | 1.3.6.1.4.1.14125.1.2.6.1.1.10 | INTEGER | read-create | The status of the IP Address table entry. |
| ROW ipAddressesTableRowStatus | 1.3.6.1.4.1.14125.1.2.6.1.1.11 | RowStatus | read-create | The row status in the IP Address table entry. |
| nodeConfigurationNetwork | 1.3.6.1.4.1.14125.1.2.7 | |||
| IP networkPrimaryDns | 1.3.6.1.4.1.14125.1.2.7.1 | IpAddress | read-write | The primary DNS Server IP address |
| IP networkSecondaryDns | 1.3.6.1.4.1.14125.1.2.7.2 | IpAddress | read-write | The secondary DNS Server IP address |
| OCT networkDomain | 1.3.6.1.4.1.14125.1.2.7.3 | OCTET STRING | read-write | The DNS Server Domain name |
| nodeConfigurationSyslog | 1.3.6.1.4.1.14125.1.2.8 | |||
| INT syslogActive | 1.3.6.1.4.1.14125.1.2.8.1 | INTEGER | read-write | Enable/Disable the syslog service. |
| INT syslogKlog | 1.3.6.1.4.1.14125.1.2.8.2 | INTEGER | read-write | Enable/Disable the Klog service. |
| I32 syslogLevel | 1.3.6.1.4.1.14125.1.2.8.3 | Integer32 | read-write | Define the level of the syslog service. |
| INT syslogRemoteActive | 1.3.6.1.4.1.14125.1.2.8.4 | INTEGER | read-write | Enable/Disable the remote syslog server. |
| OCT syslogRemoteAddress | 1.3.6.1.4.1.14125.1.2.8.5 | OCTET STRING | read-write | The remote syslog server name/address |
| nodeConfigurationOlsr | 1.3.6.1.4.1.14125.1.2.9 | |||
| INT olsrActive | 1.3.6.1.4.1.14125.1.2.9.1 | INTEGER | read-write | Enable/Disable the OLSR service. |
| I32 olsrTosValue | 1.3.6.1.4.1.14125.1.2.9.2 | Integer32 | read-write | Display the value for the IP header of control traffic. |
| INT olsrWillingnessActive | 1.3.6.1.4.1.14125.1.2.9.3 | INTEGER | read-write | Display the option of automatic willingness calculation. |
| I32 olsrWillingness | 1.3.6.1.4.1.14125.1.2.9.4 | Integer32 | read-write | Display the willingness value. |
| INT olsrHysteresisActive | 1.3.6.1.4.1.14125.1.2.9.5 | INTEGER | read-write | Display the option of hysteresis. |
| OCT olsrHysteresisScaling | 1.3.6.1.4.1.14125.1.2.9.6 | OCTET STRING | read-write | Display the scale of hysteresis parameter (range: 0 to 1). |
| OCT olsrHysteresisThrHigh | 1.3.6.1.4.1.14125.1.2.9.7 | OCTET STRING | read-write | Display the value of high threshold (range: 0 to 1). |
| OCT olsrHysteresisThrLow | 1.3.6.1.4.1.14125.1.2.9.8 | OCTET STRING | read-write | Display the value of low threshold (range: 0 to 1). |
| INT olsrLinkQualityType | 1.3.6.1.4.1.14125.1.2.9.9 | INTEGER | read-write | Display the option of link quality type. |
| I32 olsrLinkQualitySize | 1.3.6.1.4.1.14125.1.2.9.10 | Integer32 | read-write | Display the link quality window size. |
| OCT olsrPollRate | 1.3.6.1.4.1.14125.1.2.9.11 | OCTET STRING | read-write | Display the polling rate in milliseconds. |
| INT olsrTcType | 1.3.6.1.4.1.14125.1.2.9.12 | INTEGER | read-write | Display the option of TC type. |
| INT olsrMpr | 1.3.6.1.4.1.14125.1.2.9.13 | INTEGER | read-write | Display the value of how many MPRs a node should try to select to reach every 2 hop neighbour. |
| STR olsrSharedKey | 1.3.6.1.4.1.14125.1.2.9.14 | DisplayString | read-write | The shared key for OLSR |
| olsrInterfaceTable | 1.3.6.1.4.1.14125.1.2.9.15 | not-accessible | This table contains the information of the OLSR interfaces. | |
| olsrInterfaceTableEntry | 1.3.6.1.4.1.14125.1.2.9.15.1 | not-accessible | Represent the entry in the OLSR Interface table. | |
| I32 olsrInterfaceTableIndex | 1.3.6.1.4.1.14125.1.2.9.15.1.1 | Integer32 | not-accessible | Specify the index of the OLSR interface table. |
| OCT olsrInterfaceTableIface | 1.3.6.1.4.1.14125.1.2.9.15.1.2 | OCTET STRING | read-create | The name of the OLSR interface. |
| OCT olsrInterfaceTableHelloInterval | 1.3.6.1.4.1.14125.1.2.9.15.1.3 | OCTET STRING | read-create | The hello interval of the OLSR interface. |
| OCT olsrInterfaceTableHelloValidity | 1.3.6.1.4.1.14125.1.2.9.15.1.4 | OCTET STRING | read-create | The hello validity of the OLSR interface. |
| OCT olsrInterfaceTableTcInterval | 1.3.6.1.4.1.14125.1.2.9.15.1.5 | OCTET STRING | read-create | The TC interval of the OLSR interface. |
| OCT olsrInterfaceTableTcValidity | 1.3.6.1.4.1.14125.1.2.9.15.1.6 | OCTET STRING | read-create | The TC validity of the OLSR interface. |
| OCT olsrInterfaceTableMidInterval | 1.3.6.1.4.1.14125.1.2.9.15.1.7 | OCTET STRING | read-create | The MID interval of the OLSR interface. |
| OCT olsrInterfaceTableMidValidity | 1.3.6.1.4.1.14125.1.2.9.15.1.8 | OCTET STRING | read-create | The MID validity of the OLSR interface. |
| OCT olsrInterfaceTableHnaInterval | 1.3.6.1.4.1.14125.1.2.9.15.1.9 | OCTET STRING | read-create | The HNA interval of the OLSR interface. |
| OCT olsrInterfaceTableHnaValidity | 1.3.6.1.4.1.14125.1.2.9.15.1.10 | OCTET STRING | read-create | The HNA validity of the OLSR interface. |
| STR olsrInterfaceTableComments | 1.3.6.1.4.1.14125.1.2.9.15.1.11 | DisplayString | read-create | An optional description regarding the entry of the Olsr Interface table. |
| INT olsrInterfaceTableActive | 1.3.6.1.4.1.14125.1.2.9.15.1.12 | INTEGER | read-create | The status of the OLSR Interface table entry. |
| ROW olsrInterfaceTableRowStatus | 1.3.6.1.4.1.14125.1.2.9.15.1.13 | RowStatus | read-create | The row status in the OLSR Interface table entry. |
| nodeConfigurationRoute | 1.3.6.1.4.1.14125.1.2.10 | |||
| routeTable | 1.3.6.1.4.1.14125.1.2.10.1 | not-accessible | This table contains the information of the Route settings. | |
| routeTableEntry | 1.3.6.1.4.1.14125.1.2.10.1.1 | not-accessible | Represent the entry in the Route table. | |
| I32 routeTableIndex | 1.3.6.1.4.1.14125.1.2.10.1.1.1 | Integer32 | not-accessible | Specify the index of the routing table. |
| IP routeTableSubnet | 1.3.6.1.4.1.14125.1.2.10.1.1.2 | IpAddress | read-create | The destination Subnet of the routing rule. |
| IP routeTableNetmask | 1.3.6.1.4.1.14125.1.2.10.1.1.3 | IpAddress | read-create | The Netmask for the destination subnet of the routing rule. |
| IP routeTableGateway | 1.3.6.1.4.1.14125.1.2.10.1.1.4 | IpAddress | read-create | The next hop gateway IP Address. |
| OCT routeTableDevice | 1.3.6.1.4.1.14125.1.2.10.1.1.5 | OCTET STRING | read-create | The Device Interface Name. |
| INT routeTableDirect | 1.3.6.1.4.1.14125.1.2.10.1.1.6 | INTEGER | read-create | The type of routing: direct or indirect. |
| STR routeTableComments | 1.3.6.1.4.1.14125.1.2.10.1.1.7 | DisplayString | read-create | An optional description regarding the entry of the Routing table. |
| INT routeTableActive | 1.3.6.1.4.1.14125.1.2.10.1.1.8 | INTEGER | read-create | The status of the Routing table entry. |
| ROW routeTableRowStatus | 1.3.6.1.4.1.14125.1.2.10.1.1.9 | RowStatus | read-create | The row status in the Routing table entry. |
| nodeConfigurationNtp | 1.3.6.1.4.1.14125.1.2.11 | |||
| INT ntpActive | 1.3.6.1.4.1.14125.1.2.11.1 | INTEGER | read-write | Enable/Disable the NTP service of the device. |
| STR ntpTimezone | 1.3.6.1.4.1.14125.1.2.11.2 | DisplayString | read-write | NTP Timezone. |
| ntpTable | 1.3.6.1.4.1.14125.1.2.11.3 | not-accessible | This is the Network Time Protocol servers table. | |
| ntpTableEntry | 1.3.6.1.4.1.14125.1.2.11.3.1 | not-accessible | Represent the entry in the NTP table. | |
| I32 ntpTableIndex | 1.3.6.1.4.1.14125.1.2.11.3.1.1 | Integer32 | not-accessible | Specify the index of the NTP table. |
| OCT ntpTableServer | 1.3.6.1.4.1.14125.1.2.11.3.1.2 | OCTET STRING | read-create | The name of the NTP Server. |
| I32 ntpTableMinPoll | 1.3.6.1.4.1.14125.1.2.11.3.1.3 | Integer32 | read-create | The minimum poll time in seconds. |
| I32 ntpTableMaxPoll | 1.3.6.1.4.1.14125.1.2.11.3.1.4 | Integer32 | read-create | The maximum poll time in seconds. |
| STR ntpTableComments | 1.3.6.1.4.1.14125.1.2.11.3.1.5 | DisplayString | read-create | An optional description regarding the entry of the NTP table. |
| INT ntpTableActive | 1.3.6.1.4.1.14125.1.2.11.3.1.6 | INTEGER | read-create | The status of the NTP table entry. |
| ROW ntpTableRowStatus | 1.3.6.1.4.1.14125.1.2.11.3.1.7 | RowStatus | read-create | The row status in the NTP table entry. |
| nodeConfigurationDhcpd | 1.3.6.1.4.1.14125.1.2.12 | |||
| dhcpdTable | 1.3.6.1.4.1.14125.1.2.12.1 | not-accessible | This is the DHCP server table. | |
| dhcpdTableEntry | 1.3.6.1.4.1.14125.1.2.12.1.1 | not-accessible | Represent the entry in the DHCP server table. | |
| I32 dhcpdTableIndex | 1.3.6.1.4.1.14125.1.2.12.1.1.1 | Integer32 | not-accessible | Specify the index of the DHCP server table. |
| OCT dhcpdTableIface | 1.3.6.1.4.1.14125.1.2.12.1.1.2 | OCTET STRING | read-create | Specify the interface name of the DHCP server table entry. |
| IP dhcpdTableSubnet | 1.3.6.1.4.1.14125.1.2.12.1.1.3 | IpAddress | read-create | Specify the Subnet Address for the DHCP server table entry. |
| IP dhcpdTableNetstart | 1.3.6.1.4.1.14125.1.2.12.1.1.4 | IpAddress | read-create | Specify the Starting IP Address for the DHCP server table entry. |
| IP dhcpdTableNetend | 1.3.6.1.4.1.14125.1.2.12.1.1.5 | IpAddress | read-create | Specify the Ending IP Address for the DHCP server table entry. |
| IP dhcpdTableNetmask | 1.3.6.1.4.1.14125.1.2.12.1.1.6 | IpAddress | read-create | Specify the Netmask for the subnet Address for the DHCP server table entry. |
| I32 dhcpdTableMaxLease | 1.3.6.1.4.1.14125.1.2.12.1.1.7 | Integer32 | read-create | Specify the maximum lease time for the DHCP server table entry. |
| I32 dhcpdTableLease | 1.3.6.1.4.1.14125.1.2.12.1.1.8 | Integer32 | read-create | Specify the default lease time for the DHCP server table entry. |
| OCT dhcpdTableDomain | 1.3.6.1.4.1.14125.1.2.12.1.1.9 | OCTET STRING | read-create | The domain name of the DHCP server table's entry. |
| IP dhcpdTableDns | 1.3.6.1.4.1.14125.1.2.12.1.1.10 | IpAddress | read-create | Specify the DNS IP Address for the DHCP server table entry. |
| IP dhcpdTableRouter | 1.3.6.1.4.1.14125.1.2.12.1.1.11 | IpAddress | read-create | Specify the Router IP Address for the DHCP server table entry. |
| STR dhcpdTableComments | 1.3.6.1.4.1.14125.1.2.12.1.1.12 | DisplayString | read-create | An optional description regarding the entry of the DHCP server table. |
| INT dhcpdTableActive | 1.3.6.1.4.1.14125.1.2.12.1.1.13 | INTEGER | read-create | The status of the DHCP server table entry. |
| ROW dhcpdTableRowStatus | 1.3.6.1.4.1.14125.1.2.12.1.1.14 | RowStatus | read-create | The row status in the DHCP server table entry. |
| INT dhcpdActive | 1.3.6.1.4.1.14125.1.2.12.2 | INTEGER | read-write | Enable/Disable the DHCPD Service of the device. |
| I32 dhcpClientExecute | 1.3.6.1.4.1.14125.1.2.12.3 | Integer32 | read-only | A command to execute the DHCP Client list |
| dhcpClientTable | 1.3.6.1.4.1.14125.1.2.12.4 | not-accessible | This is the read-only DHCP client table. | |
| dhcpClientTableEntry | 1.3.6.1.4.1.14125.1.2.12.4.1 | not-accessible | Represent the entry in the DHCP client table. | |
| I32 dhcpClientTableIndex | 1.3.6.1.4.1.14125.1.2.12.4.1.1 | Integer32 | not-accessible | Specify the index of the DHCP client table. |
| IP dhcpClientTableIp | 1.3.6.1.4.1.14125.1.2.12.4.1.2 | IpAddress | read-only | Specify the IP address of the client in the DHCP server. |
| MAC dhcpClientTableMac | 1.3.6.1.4.1.14125.1.2.12.4.1.3 | MacAddress | read-only | Specify the MAC address of the client in the DHCP server. |
| STR dhcpClientTableHostname | 1.3.6.1.4.1.14125.1.2.12.4.1.4 | DisplayString | read-only | Specify the Host name of the client in the DHCP server. |
| nodeConfigurationDns | 1.3.6.1.4.1.14125.1.2.13 | |||
| INT dnsActive | 1.3.6.1.4.1.14125.1.2.13.1 | INTEGER | read-write | Enable/Disable the DNS Service of the device. |
| INT dnsDomainNeeded | 1.3.6.1.4.1.14125.1.2.13.2 | INTEGER | read-only | Enable/Disable the strict domain checking of the DNS Service. |
| INT dnsBogusPriv | 1.3.6.1.4.1.14125.1.2.13.3 | INTEGER | read-only | Enable/Disable the feature. |
| INT dnsFilterWin2k | 1.3.6.1.4.1.14125.1.2.13.4 | INTEGER | read-only | Enable/Disable the filter for Windows 2k. |
| INT dnsStrictOrder | 1.3.6.1.4.1.14125.1.2.13.5 | INTEGER | read-only | Enable/Disable the strict DNS lookup order feature . |
| dnsTable | 1.3.6.1.4.1.14125.1.2.13.6 | not-accessible | This table contains the information of the DNS. | |
| dnsTableEntry | 1.3.6.1.4.1.14125.1.2.13.6.1 | not-accessible | Represent the entry in the DNS table. | |
| I32 dnsTableIndex | 1.3.6.1.4.1.14125.1.2.13.6.1.1 | Integer32 | not-accessible | Specify the index of the DNS service table. |
| OCT dnsTableDns | 1.3.6.1.4.1.14125.1.2.13.6.1.2 | OCTET STRING | read-create | Specify the Hostname/Domain name of the DNS Service table entry. |
| IP dnsTableIpaddress | 1.3.6.1.4.1.14125.1.2.13.6.1.3 | IpAddress | read-create | Specify the reply IP Address of the table entry. |
| STR dnsTableComments | 1.3.6.1.4.1.14125.1.2.13.6.1.4 | DisplayString | read-create | An optional comment associated to entry of the DNS service table. |
| INT dnsTableActive | 1.3.6.1.4.1.14125.1.2.13.6.1.5 | INTEGER | read-create | The status of the DNS table entry. |
| ROW dnsTableRowStatus | 1.3.6.1.4.1.14125.1.2.13.6.1.6 | RowStatus | read-create | The row status in the DNS table entry |
| nodeConfigurationTopology | 1.3.6.1.4.1.14125.1.2.14 | |||
| topologyTable | 1.3.6.1.4.1.14125.1.2.14.1 | not-accessible | This table contains the list of topology of the node, displaying the relationship between this node and other. | |
| topologyTableEntry | 1.3.6.1.4.1.14125.1.2.14.1.1 | not-accessible | Represent the entry in the Topology table. | |
| I32 topologyTableIndex | 1.3.6.1.4.1.14125.1.2.14.1.1.1 | Integer32 | not-accessible | Specify the index of the node Topology table. |
| OCT topologyTableSource | 1.3.6.1.4.1.14125.1.2.14.1.1.2 | OCTET STRING | read-only | The source node's IP Address |
| OCT topologyTableDestination | 1.3.6.1.4.1.14125.1.2.14.1.1.3 | OCTET STRING | read-only | The destination node's IP Address |
| OCT topologyTableLabel | 1.3.6.1.4.1.14125.1.2.14.1.1.4 | OCTET STRING | read-only | The label of the link between the source node and destination node. |
| OCT topologyTableStyle | 1.3.6.1.4.1.14125.1.2.14.1.1.5 | OCTET STRING | read-only | The style of the link between the source node and destination node. |
| nodeConfigurationFirewall | 1.3.6.1.4.1.14125.1.2.15 | |||
| INT firewallActive | 1.3.6.1.4.1.14125.1.2.15.1 | INTEGER | read-write | Enable/Disable the Firewall feature of the node. |
| firewallTable | 1.3.6.1.4.1.14125.1.2.15.2 | not-accessible | This table contains rules of the firewall of the system. | |
| firewallTableEntry | 1.3.6.1.4.1.14125.1.2.15.2.1 | not-accessible | Represent the entry in the Firewall table. | |
| I32 firewallTableIndex | 1.3.6.1.4.1.14125.1.2.15.2.1.1 | Integer32 | not-accessible | Specify the index of the firewall table. |
| INT firewallTableTarget | 1.3.6.1.4.1.14125.1.2.15.2.1.2 | INTEGER | read-create | Allow or deny the Target. |
| OCT firewallTableSrcIface | 1.3.6.1.4.1.14125.1.2.15.2.1.3 | OCTET STRING | read-create | The source interface name |
| OCT firewallTableDstIface | 1.3.6.1.4.1.14125.1.2.15.2.1.4 | OCTET STRING | read-create | The destination interface name |
| IP firewallTableSrcIp | 1.3.6.1.4.1.14125.1.2.15.2.1.5 | IpAddress | read-create | The source IP Address |
| IP firewallTableSrcMask | 1.3.6.1.4.1.14125.1.2.15.2.1.6 | IpAddress | read-create | The net mask for the source IP Address |
| IP firewallTableDstIp | 1.3.6.1.4.1.14125.1.2.15.2.1.7 | IpAddress | read-create | The destination IP Address |
| IP firewallTableDstMask | 1.3.6.1.4.1.14125.1.2.15.2.1.8 | IpAddress | read-create | The net mask for the destination IP Address |
| I32 firewallTableProtocol | 1.3.6.1.4.1.14125.1.2.15.2.1.9 | Integer32 | read-create | The protocol in number |
| I32 firewallTableStartPort | 1.3.6.1.4.1.14125.1.2.15.2.1.10 | Integer32 | read-create | The start port number |
| I32 firewallTableEndPort | 1.3.6.1.4.1.14125.1.2.15.2.1.11 | Integer32 | read-create | The end port number |
| I32 firewallTableUserGroup | 1.3.6.1.4.1.14125.1.2.15.2.1.12 | Integer32 | read-create | User group associated with this rule |
| STR firewallTableComment | 1.3.6.1.4.1.14125.1.2.15.2.1.13 | DisplayString | read-create | The name for the specified rules |
| INT firewallTableActive | 1.3.6.1.4.1.14125.1.2.15.2.1.14 | INTEGER | read-create | The status of the firewall table entry. |
| ROW firewallTableRowStatus | 1.3.6.1.4.1.14125.1.2.15.2.1.15 | RowStatus | read-create | The row status in the firewall table entry |
| nodeConfigurationMacaccess | 1.3.6.1.4.1.14125.1.2.16 | |||
| INT macaccessActive | 1.3.6.1.4.1.14125.1.2.16.1 | INTEGER | read-write | Enable/Disable the MAC ACCESS feature of the node. |
| INT macaccessType | 1.3.6.1.4.1.14125.1.2.16.2 | INTEGER | read-write | Choose the default type of the access, either Allow or Deny. |
| I32 macActiveListExecute | 1.3.6.1.4.1.14125.1.2.16.3 | Integer32 | read-only | A command to execute the Active MAC list |
| macaccessTable | 1.3.6.1.4.1.14125.1.2.16.4 | not-accessible | This table display the Mac Access Table. | |
| macaccessTableEntry | 1.3.6.1.4.1.14125.1.2.16.4.1 | not-accessible | Represent the entry in the Mac Access table. | |
| I32 macaccessTableIndex | 1.3.6.1.4.1.14125.1.2.16.4.1.1 | Integer32 | not-accessible | Specify the index of the MAC Access table. |
| MAC macaccessTableMac | 1.3.6.1.4.1.14125.1.2.16.4.1.2 | MacAddress | read-create | The MAC address to be filtered. |
| INT macaccessTableType | 1.3.6.1.4.1.14125.1.2.16.4.1.3 | INTEGER | read-create | The type of the access for the MAC access table entry. |
| STR macaccessTableComment | 1.3.6.1.4.1.14125.1.2.16.4.1.4 | DisplayString | read-create | An optional comment associated to entry of the MAC Access table. |
| INT macaccessTableActive | 1.3.6.1.4.1.14125.1.2.16.4.1.5 | INTEGER | read-create | The status of the MAC access table entry. |
| ROW macaccessTableRowStatus | 1.3.6.1.4.1.14125.1.2.16.4.1.6 | RowStatus | read-create | The row status in the MAC Access table entry |
| macActiveTable | 1.3.6.1.4.1.14125.1.2.16.5 | not-accessible | This is the read-only Active MAC table. | |
| macActiveTableEntry | 1.3.6.1.4.1.14125.1.2.16.5.1 | not-accessible | Represent the entry in the Active MAC table. | |
| I32 macActiveTableIndex | 1.3.6.1.4.1.14125.1.2.16.5.1.1 | Integer32 | not-accessible | Specify the index of the Active MAC table. |
| MAC macActiveTableMac | 1.3.6.1.4.1.14125.1.2.16.5.1.2 | MacAddress | read-only | Specify the MAC address of the active user Active MAC table. |
| IP macActiveTableIp | 1.3.6.1.4.1.14125.1.2.16.5.1.3 | IpAddress | read-only | Specify the MAC address of the active user Active MAC table. |
| nodeConfigurationNat | 1.3.6.1.4.1.14125.1.2.17 | |||
| INT natActive | 1.3.6.1.4.1.14125.1.2.17.1 | INTEGER | read-write | Enable/Disable the NAT Table of the node. |
| natTable | 1.3.6.1.4.1.14125.1.2.17.2 | not-accessible | This table display the NAT Table. | |
| natTableEntry | 1.3.6.1.4.1.14125.1.2.17.2.1 | not-accessible | Represent the entry in the NAT table. | |
| I32 natTableIndex | 1.3.6.1.4.1.14125.1.2.17.2.1.1 | Integer32 | not-accessible | Specify the index of the NAT table. |
| INT natTableProtocol | 1.3.6.1.4.1.14125.1.2.17.2.1.2 | INTEGER | read-create | Define the type of protocol of the NAT Table entry |
| I32 natTablePort | 1.3.6.1.4.1.14125.1.2.17.2.1.3 | Integer32 | read-create | Define the port number of the NAT Table entry |
| IP natTableIp | 1.3.6.1.4.1.14125.1.2.17.2.1.4 | IpAddress | read-create | Define the IP Address of the NAT Table entry |
| STR natTableComment | 1.3.6.1.4.1.14125.1.2.17.2.1.5 | DisplayString | read-create | An optional comment associated to entry of the NAT table. |
| INT natTableActive | 1.3.6.1.4.1.14125.1.2.17.2.1.6 | INTEGER | read-create | The status of the NAT table entry. |
| ROW natTableRowStatus | 1.3.6.1.4.1.14125.1.2.17.2.1.7 | RowStatus | read-create | The row status in the NAT table entry |
| nodeConfigurationOlsrGW | 1.3.6.1.4.1.14125.1.2.18 | |||
| olsrGatewayTable | 1.3.6.1.4.1.14125.1.2.18.1 | not-accessible | This table contains the OLSR local network gateway. | |
| olsrGatewayTableEntry | 1.3.6.1.4.1.14125.1.2.18.1.1 | not-accessible | Represent the entry in the OLSR Gateway table. | |
| I32 olsrGatewayTableIndex | 1.3.6.1.4.1.14125.1.2.18.1.1.1 | Integer32 | not-accessible | Specify the index of the OLSR gateway table. |
| IP olsrGatewayTableSubnet | 1.3.6.1.4.1.14125.1.2.18.1.1.2 | IpAddress | read-create | The Subnet Address of the OLSR gateway entry. |
| IP olsrGatewayTableNetmask | 1.3.6.1.4.1.14125.1.2.18.1.1.3 | IpAddress | read-create | The netmask for the subnet above. |
| STR olsrGatewayTableComments | 1.3.6.1.4.1.14125.1.2.18.1.1.4 | DisplayString | read-create | An optional description regarding the entry of the Olsr Gateway table. |
| INT olsrGatewayTableActive | 1.3.6.1.4.1.14125.1.2.18.1.1.5 | INTEGER | read-create | The status of the OLSR Gateway table entry. |
| ROW olsrGatewayTableRowStatus | 1.3.6.1.4.1.14125.1.2.18.1.1.6 | RowStatus | read-create | The row status in the OLSR Gateway table entry. |
| nodeConfigurationShaping | 1.3.6.1.4.1.14125.1.2.19 | |||
| INT shapingActive | 1.3.6.1.4.1.14125.1.2.19.1 | INTEGER | read-write | Enable/disable the traffic shaping service of the device |
| I32 shapingWanRateup | 1.3.6.1.4.1.14125.1.2.19.2 | Integer32 | read-write | WAN port uplink speed in Mbps. |
| I32 shapingWanRatedown | 1.3.6.1.4.1.14125.1.2.19.3 | Integer32 | read-write | WAN port downlink speed in Mbps. |
| I32 shapingMeshRateup | 1.3.6.1.4.1.14125.1.2.19.4 | Integer32 | read-write | Mesh port uplink speed in Mbps. |
| I32 shapingMeshRatedown | 1.3.6.1.4.1.14125.1.2.19.5 | Integer32 | read-write | Mesh port downlink speed in Mbps. |
| I32 shapingVlanRateup | 1.3.6.1.4.1.14125.1.2.19.6 | Integer32 | read-write | VLAN port uplink speed in Mbps. |
| I32 shapingVlanRatedown | 1.3.6.1.4.1.14125.1.2.19.7 | Integer32 | read-write | VLAN port downlink speed in Mbps. |
| I32 shapingDefaultup | 1.3.6.1.4.1.14125.1.2.19.8 | Integer32 | read-write | User default uplink speed in kbps. |
| I32 shapingDefaultdown | 1.3.6.1.4.1.14125.1.2.19.9 | Integer32 | read-write | User default downlink speed in kbps. |
| shapingTable | 1.3.6.1.4.1.14125.1.2.19.10 | not-accessible | This table display the traffic shaping table. | |
| shapingTableEntry | 1.3.6.1.4.1.14125.1.2.19.10.1 | not-accessible | Represent the entry in the traffic shaping table. | |
| I32 shapingTableIndex | 1.3.6.1.4.1.14125.1.2.19.10.1.1 | Integer32 | not-accessible | Specify the index of the traffic shaping table. |
| INT shapingTableProtocol | 1.3.6.1.4.1.14125.1.2.19.10.1.2 | INTEGER | read-create | Define the type of protocol of the traffic shaping Table entry |
| I32 shapingTablePort | 1.3.6.1.4.1.14125.1.2.19.10.1.3 | Integer32 | read-create | Define the port number of the traffic shaping Table entry |
| I32 shapingTableMinsize | 1.3.6.1.4.1.14125.1.2.19.10.1.4 | Integer32 | read-create | Define the minimum packet size of the traffic shaping Table entry |
| I32 shapingTableMaxsize | 1.3.6.1.4.1.14125.1.2.19.10.1.5 | Integer32 | read-create | Define the maximum packet size of the traffic shaping Table entry |
| INT shapingTablePriority | 1.3.6.1.4.1.14125.1.2.19.10.1.6 | INTEGER | read-create | Define the type of priority of the traffic shaping Table entry |
| STR shapingTableComment | 1.3.6.1.4.1.14125.1.2.19.10.1.7 | DisplayString | read-create | An optional comment associated to entry of the traffiic shaping table. |
| INT shapingTableActive | 1.3.6.1.4.1.14125.1.2.19.10.1.8 | INTEGER | read-create | The status of the traffic shaping table entry. |
| ROW shapingTableRowStatus | 1.3.6.1.4.1.14125.1.2.19.10.1.9 | RowStatus | read-create | The row status in the traffic shaping table entry |
| nodeConfigurationPppoe | 1.3.6.1.4.1.14125.1.2.20 | |||
| INT pppoeActive | 1.3.6.1.4.1.14125.1.2.20.1 | INTEGER | read-write | Enable/disable the PPPoE service of the system |
| STR pppoeUsername | 1.3.6.1.4.1.14125.1.2.20.2 | DisplayString | read-write | The username of the PPPoE service |
| STR pppoePassword | 1.3.6.1.4.1.14125.1.2.20.3 | DisplayString | read-write | The password correspond to the username of the PPPoE service |
| INT pppoeAuthType | 1.3.6.1.4.1.14125.1.2.20.4 | INTEGER | read-write | The type of authentication |
| INT pppoeUseChap | 1.3.6.1.4.1.14125.1.2.20.5 | INTEGER | read-write | Enable/disable server side authentication |
| STR pppoeChapUsername | 1.3.6.1.4.1.14125.1.2.20.6 | DisplayString | read-write | The username at the server side |
| STR pppoeChapPassword | 1.3.6.1.4.1.14125.1.2.20.7 | DisplayString | read-write | The password correspond to the username at the server side |
| nodeConfigurationPptp | 1.3.6.1.4.1.14125.1.2.21 | |||
| INT pptpActive | 1.3.6.1.4.1.14125.1.2.21.1 | INTEGER | read-write | Enable/disable the PPTP server service of the system |
| pptpTable | 1.3.6.1.4.1.14125.1.2.21.2 | not-accessible | This table display the PPTP server Table. | |
| pptpTableEntry | 1.3.6.1.4.1.14125.1.2.21.2.1 | not-accessible | Represent the entry in the PPTP server table. | |
| I32 pptpTableIndex | 1.3.6.1.4.1.14125.1.2.21.2.1.1 | Integer32 | not-accessible | Specify the index of the PPTP server table. |
| STR pptpTableUsername | 1.3.6.1.4.1.14125.1.2.21.2.1.2 | DisplayString | read-create | The username of the PPTP server user. |
| STR pptpTablePassword | 1.3.6.1.4.1.14125.1.2.21.2.1.3 | DisplayString | read-create | The password for the username of the PPTP server user. |
| IP pptpTableIp | 1.3.6.1.4.1.14125.1.2.21.2.1.4 | IpAddress | read-create | Define the IP Address of the PPTP server Table entry |
| STR pptpTableComment | 1.3.6.1.4.1.14125.1.2.21.2.1.5 | DisplayString | read-create | An optional comment associated to entry of the PPTP Server users table. |
| INT pptpTableActive | 1.3.6.1.4.1.14125.1.2.21.2.1.6 | INTEGER | read-create | The status of the PPTP Server users table entry. |
| ROW pptpTableRowStatus | 1.3.6.1.4.1.14125.1.2.21.2.1.7 | RowStatus | read-create | The row status in the PPTP Server users table entry |
| IP pptpServerip | 1.3.6.1.4.1.14125.1.2.21.3 | IpAddress | read-write | Define the PPTP Server IP Address |
| IP pptpStartip | 1.3.6.1.4.1.14125.1.2.21.4 | IpAddress | read-write | Define the PPTP Client Start Address |
| IP pptpEndip | 1.3.6.1.4.1.14125.1.2.21.5 | IpAddress | read-write | Define the PPTP Client End Address |
| nodeConfigurationTmipd | 1.3.6.1.4.1.14125.1.2.22 | |||
| INT tmipdActive | 1.3.6.1.4.1.14125.1.2.22.1 | INTEGER | read-write | Enable/disable the transparent mobile IP Agent service |
| OCT tmipdNetname | 1.3.6.1.4.1.14125.1.2.22.2 | OCTET STRING | read-write | The Mobile IP network name |
| IP tmipdMlrdip | 1.3.6.1.4.1.14125.1.2.22.3 | IpAddress | read-write | The IP Address of the Mobile Location Register server. |
| OCT tmipdVlan | 1.3.6.1.4.1.14125.1.2.22.4 | OCTET STRING | read-write | The Mobile IP network name |
| nodeConfigurationCaptive | 1.3.6.1.4.1.14125.1.2.23 | |||
| INT captiveActive | 1.3.6.1.4.1.14125.1.2.23.1 | INTEGER | read-write | Enable/disable the webbased authentication |
| STR captiveRedirect | 1.3.6.1.4.1.14125.1.2.23.2 | DisplayString | read-write | Redirect users to this URL on success authentication |
| INT captivePop3push | 1.3.6.1.4.1.14125.1.2.23.3 | INTEGER | read-write | Push email to not authenticated users |
| INT captiveExternalActive | 1.3.6.1.4.1.14125.1.2.23.4 | INTEGER | read-write | Enable/disable external login server |
| STR captiveExternalServer | 1.3.6.1.4.1.14125.1.2.23.5 | DisplayString | read-write | External login server URL |
| I32 captiveDefaultIdleTimeout | 1.3.6.1.4.1.14125.1.2.23.6 | Integer32 | read-write | Default Idle Timeout. |
| I32 captiveDefaultSessionTimeout | 1.3.6.1.4.1.14125.1.2.23.7 | Integer32 | read-write | Default Session Timeout. |
| INT captiveHttpActive | 1.3.6.1.4.1.14125.1.2.23.8 | INTEGER | read-write | Enable/disable login with HTTP |
| I32 captiveHttpPort | 1.3.6.1.4.1.14125.1.2.23.9 | Integer32 | read-write | Port used in captive login. |
| INT captiveHttpsActive | 1.3.6.1.4.1.14125.1.2.23.10 | INTEGER | read-write | Enable/disable login with HTTPS |
| I32 captiveHttpsPort | 1.3.6.1.4.1.14125.1.2.23.11 | Integer32 | read-write | Port used in captive login. |
| INT captiveWebspaceActive | 1.3.6.1.4.1.14125.1.2.23.12 | INTEGER | read-write | Enable/disable login with HTTPS |
| I32 captiveWebspacePort | 1.3.6.1.4.1.14125.1.2.23.13 | Integer32 | read-write | Port used in captive login. |
| STR captiveDefaultLanguage | 1.3.6.1.4.1.14125.1.2.23.14 | DisplayString | read-write | The name of the managed device |
| INT captiveMultipleUsername | 1.3.6.1.4.1.14125.1.2.23.15 | INTEGER | read-write | Enable/disable multiple login with same username |
| INT captive1xLogin | 1.3.6.1.4.1.14125.1.2.23.16 | INTEGER | read-write | Enable/disable to use 1x login when available |
| nodeConfigurationRadiusClient | 1.3.6.1.4.1.14125.1.2.24 | |||
| INT radiusclientActive | 1.3.6.1.4.1.14125.1.2.24.1 | INTEGER | read-write | Enable/disable RADIUS client service |
| STR radiusclientNasid | 1.3.6.1.4.1.14125.1.2.24.2 | DisplayString | read-write | RADIUS attribute |
| STR radiusclientCalledstationid | 1.3.6.1.4.1.14125.1.2.24.3 | DisplayString | read-write | RADIUS attribute |
| I32 radiusclientNasport | 1.3.6.1.4.1.14125.1.2.24.4 | Integer32 | read-write | RADIUS attribute. |
| I32 radiusclientNasporttype | 1.3.6.1.4.1.14125.1.2.24.5 | Integer32 | read-write | RADIUS attribute. |
| I32 radiusclientInterimupdate | 1.3.6.1.4.1.14125.1.2.24.6 | Integer32 | read-write | Interim update interval. |
| radiusclientTable | 1.3.6.1.4.1.14125.1.2.24.7 | not-accessible | This table display the Servers entry of the RADIUS client. | |
| radiusclientTableEntry | 1.3.6.1.4.1.14125.1.2.24.7.1 | not-accessible | Represent the entry in the RADIUS client table. | |
| I32 radiusclientTableIndex | 1.3.6.1.4.1.14125.1.2.24.7.1.1 | Integer32 | not-accessible | Specify the index of the RADIUS client table. |
| STR radiusclientTableServername | 1.3.6.1.4.1.14125.1.2.24.7.1.2 | DisplayString | read-create | The server name of the RADIUS client. |
| INT radiusclientTableServertype | 1.3.6.1.4.1.14125.1.2.24.7.1.3 | INTEGER | read-create | The server type: authenticate or accounting. |
| I32 radiusclientTableServerport | 1.3.6.1.4.1.14125.1.2.24.7.1.4 | Integer32 | read-create | The server port of the RADIUS client. |
| STR radiusclientTableServersecret | 1.3.6.1.4.1.14125.1.2.24.7.1.5 | DisplayString | read-create | Share secret of the radius client. |
| STR radiusclientTableComment | 1.3.6.1.4.1.14125.1.2.24.7.1.6 | DisplayString | read-create | An optional comment associated to entry of the RADIUS client table. |
| INT radiusclientTableActive | 1.3.6.1.4.1.14125.1.2.24.7.1.7 | INTEGER | read-create | The status of the RADIUS client table entry. |
| ROW radiusclientTableRowStatus | 1.3.6.1.4.1.14125.1.2.24.7.1.8 | RowStatus | read-create | The row status in the RADIUS client table entry |
| nodeConfigurationHttpd | 1.3.6.1.4.1.14125.1.2.25 | |||
| INT httpdActive | 1.3.6.1.4.1.14125.1.2.25.1 | INTEGER | read-write | Enable/disable the webbased management |
| I32 httpdPort | 1.3.6.1.4.1.14125.1.2.25.2 | Integer32 | read-write | The HTTPD port number. |
| STR httpdUsername | 1.3.6.1.4.1.14125.1.2.25.3 | DisplayString | read-write | The admin username |
| STR httpdPassword | 1.3.6.1.4.1.14125.1.2.25.4 | DisplayString | read-write | The admin password |
| INT httpdAccessctrl | 1.3.6.1.4.1.14125.1.2.25.5 | INTEGER | read-write | Enable/disable the Access Control |
| httpdTable | 1.3.6.1.4.1.14125.1.2.25.6 | not-accessible | This table display the access control of the HTTPD Table. | |
| httpdTableEntry | 1.3.6.1.4.1.14125.1.2.25.6.1 | not-accessible | Represent the entry in the HTTPD table. | |
| I32 httpdTableIndex | 1.3.6.1.4.1.14125.1.2.25.6.1.1 | Integer32 | not-accessible | Specify the index of the HTTPD table. |
| OCT httpdTableDevice | 1.3.6.1.4.1.14125.1.2.25.6.1.2 | OCTET STRING | read-create | Allow access from device. |
| IP httpdTableSubnet | 1.3.6.1.4.1.14125.1.2.25.6.1.3 | IpAddress | read-create | Allow access from network |
| IP httpdTableNetmask | 1.3.6.1.4.1.14125.1.2.25.6.1.4 | IpAddress | read-create | Netmask for the subnet |
| INT httpdTableDevnet | 1.3.6.1.4.1.14125.1.2.25.6.1.5 | INTEGER | read-create | Define the type HTTPD Table entry: Use device or network |
| STR httpdTableComment | 1.3.6.1.4.1.14125.1.2.25.6.1.6 | DisplayString | read-create | An optional comment associated to entry of the HTTPD table. |
| INT httpdTableActive | 1.3.6.1.4.1.14125.1.2.25.6.1.7 | INTEGER | read-create | The status of the HTTPD table entry. |
| ROW httpdTableRowStatus | 1.3.6.1.4.1.14125.1.2.25.6.1.8 | RowStatus | read-create | The row status in the HTTPD table entry |
| STR httpdCertPassword | 1.3.6.1.4.1.14125.1.2.25.7 | DisplayString | read-write | The certificate password |
| nodeConfigurationSnmpd | 1.3.6.1.4.1.14125.1.2.26 | |||
| INT snmpdActive | 1.3.6.1.4.1.14125.1.2.26.1 | INTEGER | read-write | Enable/disable the SNMPD management |
| INT snmpdVersion | 1.3.6.1.4.1.14125.1.2.26.2 | INTEGER | read-write | The SNMP Version |
| I32 snmpdPort | 1.3.6.1.4.1.14125.1.2.26.3 | Integer32 | read-write | SNMPD Port. |
| STR snmpdReadcommunity | 1.3.6.1.4.1.14125.1.2.26.4 | DisplayString | read-write | The read-only Community for SNMP v1 or v2c user |
| STR snmpdWritecommunity | 1.3.6.1.4.1.14125.1.2.26.5 | DisplayString | read-write | The read-write Community for SNMP v1 or v2c user |
| STR snmpdReadusername | 1.3.6.1.4.1.14125.1.2.26.6 | DisplayString | read-write | The read-only Username for SNMP v3 user |
| STR snmpdWriteusername | 1.3.6.1.4.1.14125.1.2.26.7 | DisplayString | read-write | The read-write Username for SNMP v3 user |
| STR snmpdPassword | 1.3.6.1.4.1.14125.1.2.26.8 | DisplayString | read-write | The authentication password for SNMP v3 user |
| STR snmpdPassphrase | 1.3.6.1.4.1.14125.1.2.26.9 | DisplayString | read-write | The private passphrase for SNMP v3 user |
| INT snmpdAccessctrl | 1.3.6.1.4.1.14125.1.2.26.10 | INTEGER | read-write | Enable/disable the SNMPD access control |
| snmpdTable | 1.3.6.1.4.1.14125.1.2.26.11 | not-accessible | This table display the access control of the SNMPD Table. | |
| snmpdTableEntry | 1.3.6.1.4.1.14125.1.2.26.11.1 | not-accessible | Represent the entry in the SNMPD table. | |
| I32 snmpdTableIndex | 1.3.6.1.4.1.14125.1.2.26.11.1.1 | Integer32 | not-accessible | Specify the index of the SNMPD table. |
| OCT snmpdTableDevice | 1.3.6.1.4.1.14125.1.2.26.11.1.2 | OCTET STRING | read-create | Allow access from device. |
| IP snmpdTableSubnet | 1.3.6.1.4.1.14125.1.2.26.11.1.3 | IpAddress | read-create | Allow access from network |
| IP snmpdTableNetmask | 1.3.6.1.4.1.14125.1.2.26.11.1.4 | IpAddress | read-create | Netmask for the subnet |
| INT snmpdTableDevnet | 1.3.6.1.4.1.14125.1.2.26.11.1.5 | INTEGER | read-create | Define the type SNMPD Table entry: Use device or network |
| STR snmpdTableComment | 1.3.6.1.4.1.14125.1.2.26.11.1.6 | DisplayString | read-create | An optional comment associated to entry of the SNMPD table. |
| INT snmpdTableActive | 1.3.6.1.4.1.14125.1.2.26.11.1.7 | INTEGER | read-create | The status of the SNMPD table entry. |
| ROW snmpdTableRowStatus | 1.3.6.1.4.1.14125.1.2.26.11.1.8 | RowStatus | read-create | The row status in the SNMPD table entry |
| nodeConfigurationTrap | 1.3.6.1.4.1.14125.1.2.27 | |||
| INT trapActive | 1.3.6.1.4.1.14125.1.2.27.1 | INTEGER | read-write | Enable/disable Trap management of the device |
| INT trapConfiguration | 1.3.6.1.4.1.14125.1.2.27.2 | INTEGER | read-write | Enable/disable the trap on Configuration |
| INT trapSecurity | 1.3.6.1.4.1.14125.1.2.27.3 | INTEGER | read-write | Enable/disable the trap on Security |
| INT trapWireless | 1.3.6.1.4.1.14125.1.2.27.4 | INTEGER | read-write | Enable/disable the trap on Wireless |
| INT trapOperational | 1.3.6.1.4.1.14125.1.2.27.5 | INTEGER | read-write | Enable/disable the trap on operational |
| INT trapFlash | 1.3.6.1.4.1.14125.1.2.27.6 | INTEGER | read-write | Enable/disable the trap on flash |
| INT trapTftp | 1.3.6.1.4.1.14125.1.2.27.7 | INTEGER | read-write | Enable/disable the trap on TFTP |
| INT trapImage | 1.3.6.1.4.1.14125.1.2.27.8 | INTEGER | read-write | Enable/disable the trap on Image |
| INT trapAuthentication | 1.3.6.1.4.1.14125.1.2.27.9 | INTEGER | read-write | Enable/disable the trap on authentication failure |
| trapTable | 1.3.6.1.4.1.14125.1.2.27.10 | not-accessible | This table display the SNMP Trap Host Table. | |
| trapTableEntry | 1.3.6.1.4.1.14125.1.2.27.10.1 | not-accessible | Represent the entry in the SNMP Trap Host table. | |
| I32 trapTableIndex | 1.3.6.1.4.1.14125.1.2.27.10.1.1 | Integer32 | not-accessible | Specify the index of the SNMP Trap Host Table. |
| IP trapTableIp | 1.3.6.1.4.1.14125.1.2.27.10.1.2 | IpAddress | read-create | The destination IP Address of the SNMP Trap Host Table entry |
| STR trapTableCommunity | 1.3.6.1.4.1.14125.1.2.27.10.1.3 | DisplayString | read-create | The community of the remote SNMP Host. |
| STR trapTableUsername | 1.3.6.1.4.1.14125.1.2.27.10.1.4 | DisplayString | read-create | The username of the SNMP v3 trap manager. |
| STR trapTableAuthpasswd | 1.3.6.1.4.1.14125.1.2.27.10.1.5 | DisplayString | read-create | The authentication password of the SNMP v3 trap manager. |
| STR trapTablePrivpasswd | 1.3.6.1.4.1.14125.1.2.27.10.1.6 | DisplayString | read-create | The privacy password of the SNMP v3 trap manager. |
| INT trapTableVersion | 1.3.6.1.4.1.14125.1.2.27.10.1.7 | INTEGER | read-create | The SNMP version used by the remote trap manager. |
| STR trapTableComment | 1.3.6.1.4.1.14125.1.2.27.10.1.8 | DisplayString | read-create | An optional comment associated to entry of the SNMP Trap Host table. |
| INT trapTableActive | 1.3.6.1.4.1.14125.1.2.27.10.1.9 | INTEGER | read-create | The status of the SNMP Trap Host table entry. |
| ROW trapTableRowStatus | 1.3.6.1.4.1.14125.1.2.27.10.1.10 | RowStatus | read-create | The row status in the SNMP Trap Host table entry |
| nodeConfigurationDdns | 1.3.6.1.4.1.14125.1.2.28 | |||
| INT ddnsActive | 1.3.6.1.4.1.14125.1.2.28.1 | INTEGER | read-write | Enable/disable Dynamic DNS service of the device |
| INT ddnsServer | 1.3.6.1.4.1.14125.1.2.28.2 | INTEGER | read-write | Select the Dynamic DNS provider |
| STR ddnsHostname | 1.3.6.1.4.1.14125.1.2.28.3 | DisplayString | read-write | The hostname associated with the service provider |
| STR ddnsUsername | 1.3.6.1.4.1.14125.1.2.28.4 | DisplayString | read-write | The username |
| STR ddnsPassword | 1.3.6.1.4.1.14125.1.2.28.5 | DisplayString | read-write | The password |
| nodeConfigurationZeroconfig | 1.3.6.1.4.1.14125.1.2.29 | |||
| INT zeroconfigActive | 1.3.6.1.4.1.14125.1.2.29.1 | INTEGER | read-write | Enable/disable Zero Config service of the device |
| INT zeroconfigProxyActive | 1.3.6.1.4.1.14125.1.2.29.2 | INTEGER | read-write | Handle Client proxy |
| I32 zeroconfigProxyport | 1.3.6.1.4.1.14125.1.2.29.3 | Integer32 | read-write | Port used in proxy login |
| INT zeroconfigStaticipActive | 1.3.6.1.4.1.14125.1.2.29.4 | INTEGER | read-write | Handle static ip client |
| nodeConfigurationSignallevel | 1.3.6.1.4.1.14125.1.2.30 | |||
| I32 signallevelExecute | 1.3.6.1.4.1.14125.1.2.30.1 | Integer32 | read-only | A command to execute the RSSI update |
| signallevelTable | 1.3.6.1.4.1.14125.1.2.30.2 | not-accessible | This table contains the list of signal level between the node and its neighbour nodes. | |
| signallevelTableEntry | 1.3.6.1.4.1.14125.1.2.30.2.1 | not-accessible | Represent the entry in the Signal Level table. | |
| I32 signallevelTableIndex | 1.3.6.1.4.1.14125.1.2.30.2.1.1 | Integer32 | not-accessible | Specify the index of the node Signal Level table. |
| OCT signallevelTableSource | 1.3.6.1.4.1.14125.1.2.30.2.1.2 | OCTET STRING | read-only | The source node's IP Address |
| OCT signallevelTableDestination | 1.3.6.1.4.1.14125.1.2.30.2.1.3 | OCTET STRING | read-only | The destination node's IP Address |
| OCT signallevelTableRssi | 1.3.6.1.4.1.14125.1.2.30.2.1.4 | OCTET STRING | read-only | The singal level between the source node and destination node in RSSI. |
| clientInfoTable | 1.3.6.1.4.1.14125.1.2.30.3 | not-accessible | This table contains the list of clients info of the nodes. | |
| clientInfoTableEntry | 1.3.6.1.4.1.14125.1.2.30.3.1 | not-accessible | Represent the entry in the Client Info table. | |
| I32 clientInfoTableIndex | 1.3.6.1.4.1.14125.1.2.30.3.1.1 | Integer32 | not-accessible | Specify the index of the node Client Info table. |
| OCT clientInfoTableEssid | 1.3.6.1.4.1.14125.1.2.30.3.1.2 | OCTET STRING | read-only | The ESSID of the AP |
| OCT clientInfoTableMac | 1.3.6.1.4.1.14125.1.2.30.3.1.3 | OCTET STRING | read-only | The MAC Address of the client |
| OCT clientInfoTableChannel | 1.3.6.1.4.1.14125.1.2.30.3.1.4 | OCTET STRING | read-only | The channel of the Client |
| OCT clientInfoTableRate | 1.3.6.1.4.1.14125.1.2.30.3.1.5 | OCTET STRING | read-only | The speed rate of the client in kbps |
| OCT clientInfoTableRssi | 1.3.6.1.4.1.14125.1.2.30.3.1.6 | OCTET STRING | read-only | The singal level between the client and node in RSSI. |
| OCT clientInfoTableIdletime | 1.3.6.1.4.1.14125.1.2.30.3.1.7 | OCTET STRING | read-only | The idle timeout in second of the client. |
| clientStatTable | 1.3.6.1.4.1.14125.1.2.30.4 | not-accessible | This table contains the details of the clients' statistic. | |
| clientStatTableEntry | 1.3.6.1.4.1.14125.1.2.30.4.1 | not-accessible | Represent the entry in the Client Stat table. | |
| I32 clientStatTableIndex | 1.3.6.1.4.1.14125.1.2.30.4.1.1 | Integer32 | not-accessible | Specify the index of the node Client Statistic table. |
| IP clientStatTableIp | 1.3.6.1.4.1.14125.1.2.30.4.1.2 | IpAddress | read-only | The IP Address of the clinet |
| MAC clientStatTableMac | 1.3.6.1.4.1.14125.1.2.30.4.1.3 | MacAddress | read-only | The MAC Address of the client |
| OCT clientStatTableTx | 1.3.6.1.4.1.14125.1.2.30.4.1.4 | OCTET STRING | read-only | The trasmit of the client in bytes count |
| OCT clientStatTableRx | 1.3.6.1.4.1.14125.1.2.30.4.1.5 | OCTET STRING | read-only | The receive of the client in bytes count |
| OCT clientStatTableTxPkt | 1.3.6.1.4.1.14125.1.2.30.4.1.6 | OCTET STRING | read-only | The transmit of the client in packets count.. |
| OCT clientStatTableRxPkt | 1.3.6.1.4.1.14125.1.2.30.4.1.7 | OCTET STRING | read-only | The receive of the client in packets count.. |
| OCT clientStatTableOnlinetime | 1.3.6.1.4.1.14125.1.2.30.4.1.8 | OCTET STRING | read-only | The Online time of the client in 'HH:MM:SS'. |
| nodeConfigurationIpsec | 1.3.6.1.4.1.14125.1.2.31 | |||
| INT ipsecActive | 1.3.6.1.4.1.14125.1.2.31.1 | INTEGER | read-write | Enable the IP Sec service of the device |
| INT ipsecType | 1.3.6.1.4.1.14125.1.2.31.2 | INTEGER | read-write | Select the type of the IP Sec |
| OCT ipsecLocalId | 1.3.6.1.4.1.14125.1.2.31.3 | OCTET STRING | read-write | Define the local identity. |
| OCT ipsecRemoteId | 1.3.6.1.4.1.14125.1.2.31.4 | OCTET STRING | read-write | Define the remote identity. |
| IP ipsecRemoteIp | 1.3.6.1.4.1.14125.1.2.31.5 | IpAddress | read-write | Define the remote IP Address. |
| IP ipsecRemoteSubnet | 1.3.6.1.4.1.14125.1.2.31.6 | IpAddress | read-write | Define the remote Subnet. |
| IP ipsecRemoteNetmask | 1.3.6.1.4.1.14125.1.2.31.7 | IpAddress | read-write | Define the remote netmask for the subnet. |
| OCT ipsecLocalCertpass | 1.3.6.1.4.1.14125.1.2.31.8 | OCTET STRING | read-write | Define the x.509 certificate pem passphrase. |
| OCT ipsecLocalRsa | 1.3.6.1.4.1.14125.1.2.31.9 | OCTET STRING | read-write | Define the RSA Key. |
| OCT ipsecRemoteRsa | 1.3.6.1.4.1.14125.1.2.31.10 | OCTET STRING | read-write | Define the remote RSA Key. |
| OCT ipsecPsk | 1.3.6.1.4.1.14125.1.2.31.11 | OCTET STRING | read-write | Define the PSK Key. |
| nodeConfigurationL2tpc | 1.3.6.1.4.1.14125.1.2.32 | |||
| INT l2tpcActive | 1.3.6.1.4.1.14125.1.2.32.1 | INTEGER | read-write | Enable the L2TP Client feature of the device |
| OCT l2tpcLns | 1.3.6.1.4.1.14125.1.2.32.2 | OCTET STRING | read-write | Define the L2TP LNS address (Type: DNS String) |
| STR l2tpcUsername | 1.3.6.1.4.1.14125.1.2.32.3 | DisplayString | read-write | The username of the L2TP Client |
| STR l2tpcSecret | 1.3.6.1.4.1.14125.1.2.32.4 | DisplayString | read-write | The secret key of the L2TP Client |
| nodeConfigurationAutoip | 1.3.6.1.4.1.14125.1.2.33 | |||
| INT autoipActive | 1.3.6.1.4.1.14125.1.2.33.1 | INTEGER | read-write | Enable the auto IP service of the device |
| I32 autoipMeship | 1.3.6.1.4.1.14125.1.2.33.2 | Integer32 | read-write | The prefix of the mesh IP Address. |
| I32 autoipVlanip | 1.3.6.1.4.1.14125.1.2.33.3 | Integer32 | read-write | The prefix of the vlan IP Address |
| nodeConfigurationInterfaces | 1.3.6.1.4.1.14125.1.2.34 | |||
| interfacesTable | 1.3.6.1.4.1.14125.1.2.34.1 | not-accessible | This table contains the list of interfaces name of the system. | |
| interfacesTableEntry | 1.3.6.1.4.1.14125.1.2.34.1.1 | not-accessible | Represent the entry in the Interfaces table. | |
| I32 interfacesTableIndex | 1.3.6.1.4.1.14125.1.2.34.1.1.1 | Integer32 | not-accessible | Specify the index of the interfaces table. |
| OCT interfacesTableDev | 1.3.6.1.4.1.14125.1.2.34.1.1.2 | OCTET STRING | read-only | The name of the interfaces |
| OCT interfacesTableLabel | 1.3.6.1.4.1.14125.1.2.34.1.1.3 | OCTET STRING | read-only | The label of the interfaces |
| nodeConfigurationMlrd | 1.3.6.1.4.1.14125.1.2.35 | |||
| INT mlrdActive | 1.3.6.1.4.1.14125.1.2.35.1 | INTEGER | read-write | Enable the MLRD service of the device |
| OCT mlrdNetname | 1.3.6.1.4.1.14125.1.2.35.2 | OCTET STRING | read-write | The Mobile IP Network name |
| INT mlrdBackupActive | 1.3.6.1.4.1.14125.1.2.35.3 | INTEGER | read-write | Enable the MLRD backup server |
| INT mlrdRole | 1.3.6.1.4.1.14125.1.2.35.4 | INTEGER | read-write | The role of the server |
| OCT mlrdPeer | 1.3.6.1.4.1.14125.1.2.35.5 | OCTET STRING | read-write | Primary/Secondary Server address depends on current role |
| I32 mlrdBackupInterval | 1.3.6.1.4.1.14125.1.2.35.6 | Integer32 | read-write | The backup interval, in minute. |
| INT mlrdStaticActive | 1.3.6.1.4.1.14125.1.2.35.7 | INTEGER | read-write | Enable or disable the static entry |
| mlrdTable | 1.3.6.1.4.1.14125.1.2.35.8 | not-accessible | The MLRD Static entry table. | |
| mlrdTableEntry | 1.3.6.1.4.1.14125.1.2.35.8.1 | not-accessible | Represent the entry in the MLRD static entry table. | |
| I32 mlrdTableIndex | 1.3.6.1.4.1.14125.1.2.35.8.1.1 | Integer32 | not-accessible | Specify the index of the MLRD static entry Table. |
| MAC mlrdTableMac | 1.3.6.1.4.1.14125.1.2.35.8.1.2 | MacAddress | read-create | The static station Mac Address. |
| IP mlrdTableIp | 1.3.6.1.4.1.14125.1.2.35.8.1.3 | IpAddress | read-create | The station assigned IP Address. |
| IP mlrdTableParent | 1.3.6.1.4.1.14125.1.2.35.8.1.4 | IpAddress | read-create | The station assigned parent. |
| IP mlrdTableDefaultRoute | 1.3.6.1.4.1.14125.1.2.35.8.1.5 | IpAddress | read-create | The station's default route. |
| STR mlrdTableComment | 1.3.6.1.4.1.14125.1.2.35.8.1.6 | DisplayString | read-create | An optional comment associated to entry of the MLRD static entry table. |
| INT mlrdTableActive | 1.3.6.1.4.1.14125.1.2.35.8.1.7 | INTEGER | read-create | The status of the MLRD static table entry. |
| ROW mlrdTableRowStatus | 1.3.6.1.4.1.14125.1.2.35.8.1.8 | RowStatus | read-create | The row status in the MLRD static entry table row |
| nodeConfigurationRoutedog | 1.3.6.1.4.1.14125.1.2.36 | |||
| INT routedogActive | 1.3.6.1.4.1.14125.1.2.36.1 | INTEGER | read-write | Enable the route watch dog service of the device |
| STR routedogSsid | 1.3.6.1.4.1.14125.1.2.36.2 | DisplayString | read-write | The SSID used when no default routes |
| I32 routedogInterval | 1.3.6.1.4.1.14125.1.2.36.3 | Integer32 | read-write | Checking interval |
| INT routedogReboot | 1.3.6.1.4.1.14125.1.2.36.4 | INTEGER | read-write | Enable the system to reboot when interval count is reached |
| I32 routedogIntervaCount | 1.3.6.1.4.1.14125.1.2.36.5 | Integer32 | read-write | Number of interval before perform system reboot |
| nodeConfigurationLinuxdog | 1.3.6.1.4.1.14125.1.2.37 | |||
| INT linuxdogActive | 1.3.6.1.4.1.14125.1.2.37.1 | INTEGER | read-write | Enable the Linux Kernel watch dog service of the device |
| I32 linuxdogInterval | 1.3.6.1.4.1.14125.1.2.37.2 | Integer32 | read-write | Checking interval |
| nodeConfigurationAdvTunning | 1.3.6.1.4.1.14125.1.2.38 | |||
| I32 advTunningConntrackMax | 1.3.6.1.4.1.14125.1.2.38.1 | Integer32 | read-write | Max Connection Tracking |
| I32 advTunningConntrackGenericTimeout | 1.3.6.1.4.1.14125.1.2.38.2 | Integer32 | read-write | Connection Tracking generic timeout |
| I32 advTunningConntrackIcmpTimeout | 1.3.6.1.4.1.14125.1.2.38.3 | Integer32 | read-write | Connection Tracking icmp timeout |
| I32 advTunningConntrackTcpcloseTimeout | 1.3.6.1.4.1.14125.1.2.38.4 | Integer32 | read-write | Connection Tracking TCP close timeout |
| I32 advTunningConntrackTcpclosewaitTimeout | 1.3.6.1.4.1.14125.1.2.38.5 | Integer32 | read-write | Connection Tracking TCP close wait timeout |
| I32 advTunningConntrackTcpestablishTimeout | 1.3.6.1.4.1.14125.1.2.38.6 | Integer32 | read-write | Connection Tracking TCP established timeout |
| I32 advTunningConntrackTcpfinwaitTimeout | 1.3.6.1.4.1.14125.1.2.38.7 | Integer32 | read-write | Connection Tracking TCP finished wait timeout |
| I32 advTunningConntrackTcplastackTimeout | 1.3.6.1.4.1.14125.1.2.38.8 | Integer32 | read-write | Connection Tracking TCP last ack timeout |
| I32 advTunningConntrackTcpsynrecvTimeout | 1.3.6.1.4.1.14125.1.2.38.9 | Integer32 | read-write | Connection Tracking TCP syn receive timeout |
| I32 advTunningConntrackTcpsynsentTimeout | 1.3.6.1.4.1.14125.1.2.38.10 | Integer32 | read-write | Connection Tracking TCP syn sent timeout |
| I32 advTunningConntrackTcptimewaitTimeout | 1.3.6.1.4.1.14125.1.2.38.11 | Integer32 | read-write | Connection Tracking TCP time wait timeout |
| I32 advTunningConntrackUdpTimeout | 1.3.6.1.4.1.14125.1.2.38.12 | Integer32 | read-write | Connection Tracking UDP timeout |
| I32 advTunningConntrackUdpstreamTimeout | 1.3.6.1.4.1.14125.1.2.38.13 | Integer32 | read-write | Connection Tracking UDP stream timeout |
| I32 advTunningWirelessRadio0Distance | 1.3.6.1.4.1.14125.1.2.38.14 | Integer32 | read-write | Estimate operating distance (meter) 0 - card default |
| I32 advTunningWirelessRadio1Distance | 1.3.6.1.4.1.14125.1.2.38.15 | Integer32 | read-write | Estimate operating distance (meter) 0 - card default |
| I32 advTunningWirelessRadio2Distance | 1.3.6.1.4.1.14125.1.2.38.16 | Integer32 | read-write | Estimate operating distance (meter) 0 - card default |
| I32 advTunningWirelessRadio3Distance | 1.3.6.1.4.1.14125.1.2.38.17 | Integer32 | read-write | Estimate operating distance (meter) 0 - card default |
| I32 advTunningWirelessRegionDomain | 1.3.6.1.4.1.14125.1.2.38.18 | Integer32 | read-only | The wireless regulatory domain |
| I32 advTunningWirelessCountry | 1.3.6.1.4.1.14125.1.2.38.19 | Integer32 | read-write | Wireless Country settings |
| INT advTunningWirelessOutdoor | 1.3.6.1.4.1.14125.1.2.38.20 | INTEGER | read-write | Operating in Outdoor |
| INT advTunningWirelessXChannel | 1.3.6.1.4.1.14125.1.2.38.21 | INTEGER | read-write | Enable extended channel mode |
| nodeConfigurationSshd | 1.3.6.1.4.1.14125.1.2.39 | |||
| INT sshdActive | 1.3.6.1.4.1.14125.1.2.39.1 | INTEGER | read-write | Enable the SSH service of the device |
| I32 sshdPort | 1.3.6.1.4.1.14125.1.2.39.2 | Integer32 | read-write | The port number of the device use for SSH purpose. |
| nodeConfigutationWme | 1.3.6.1.4.1.14125.1.2.40 | |||
| wmeTable | 1.3.6.1.4.1.14125.1.2.40.1 | not-accessible | The Wireless Multimedia Extension table. | |
| wmeTableEntry | 1.3.6.1.4.1.14125.1.2.40.1.1 | not-accessible | Represent the entry in the WME table. | |
| I32 wmeTableIndex | 1.3.6.1.4.1.14125.1.2.40.1.1.1 | Integer32 | not-accessible | Specify the index of the WME Table. |
| OCT wmeTableName | 1.3.6.1.4.1.14125.1.2.40.1.1.2 | OCTET STRING | read-create | The interface name. |
| I32 wmeTableCwminBe | 1.3.6.1.4.1.14125.1.2.40.1.1.3 | Integer32 | read-create | CWMIN parameter for Best effort class |
| I32 wmeTableCwminBk | 1.3.6.1.4.1.14125.1.2.40.1.1.4 | Integer32 | read-create | CWMIN parameter for background class |
| I32 wmeTableCwminVi | 1.3.6.1.4.1.14125.1.2.40.1.1.5 | Integer32 | read-create | CWMIN parameter for Video class |
| I32 wmeTableCwminVo | 1.3.6.1.4.1.14125.1.2.40.1.1.6 | Integer32 | read-create | CWMIN parameter for Voice class |
| I32 wmeTableBssCwminBe | 1.3.6.1.4.1.14125.1.2.40.1.1.7 | Integer32 | read-create | BSS_CWMIN parameter for Best effort class |
| I32 wmeTableBssCwminBk | 1.3.6.1.4.1.14125.1.2.40.1.1.8 | Integer32 | read-create | BSS_CWMIN parameter for background class |
| I32 wmeTableBssCwminVi | 1.3.6.1.4.1.14125.1.2.40.1.1.9 | Integer32 | read-create | BSS_CWMIN parameter for Video class |
| I32 wmeTableBssCwminVo | 1.3.6.1.4.1.14125.1.2.40.1.1.10 | Integer32 | read-create | BSS_CWMIN parameter for Voice class |
| I32 wmeTableCwmaxBe | 1.3.6.1.4.1.14125.1.2.40.1.1.11 | Integer32 | read-create | CWMAX parameter for Best effort class |
| I32 wmeTableCwmaxBk | 1.3.6.1.4.1.14125.1.2.40.1.1.12 | Integer32 | read-create | CWMAX parameter for background class |
| I32 wmeTableCwmaxVi | 1.3.6.1.4.1.14125.1.2.40.1.1.13 | Integer32 | read-create | CWMAX parameter for Video class |
| I32 wmeTableCwmaxVo | 1.3.6.1.4.1.14125.1.2.40.1.1.14 | Integer32 | read-create | CWMAX parameter for Voice class |
| I32 wmeTableBssCwmaxBe | 1.3.6.1.4.1.14125.1.2.40.1.1.15 | Integer32 | read-create | BSS_CWMAX parameter for Best effort class |
| I32 wmeTableBssCwmaxBk | 1.3.6.1.4.1.14125.1.2.40.1.1.16 | Integer32 | read-create | BSS_CWMAX parameter for background class |
| I32 wmeTableBssCwmaxVi | 1.3.6.1.4.1.14125.1.2.40.1.1.17 | Integer32 | read-create | BSS_CWMAX parameter for Video class |
| I32 wmeTableBssCwmaxVo | 1.3.6.1.4.1.14125.1.2.40.1.1.18 | Integer32 | read-create | BSS_CWMAX parameter for Voice class |
| I32 wmeTableAifsnBe | 1.3.6.1.4.1.14125.1.2.40.1.1.19 | Integer32 | read-create | AIFSN parameter for Best effort class |
| I32 wmeTableAifsnBk | 1.3.6.1.4.1.14125.1.2.40.1.1.20 | Integer32 | read-create | AIFSN parameter for background class |
| I32 wmeTableAifsnVi | 1.3.6.1.4.1.14125.1.2.40.1.1.21 | Integer32 | read-create | AIFSN parameter for Video class |
| I32 wmeTableAifsnVo | 1.3.6.1.4.1.14125.1.2.40.1.1.22 | Integer32 | read-create | AIFSN parameter for Voice class |
| I32 wmeTableBssAifsnBe | 1.3.6.1.4.1.14125.1.2.40.1.1.23 | Integer32 | read-create | BSS_AIFSN parameter for Best effort class |
| I32 wmeTableBssAifsnBk | 1.3.6.1.4.1.14125.1.2.40.1.1.24 | Integer32 | read-create | BSS_AIFSN parameter for background class |
| I32 wmeTableBssAifsnVi | 1.3.6.1.4.1.14125.1.2.40.1.1.25 | Integer32 | read-create | BSS_AIFSN parameter for Video class |
| I32 wmeTableBssAifsnVo | 1.3.6.1.4.1.14125.1.2.40.1.1.26 | Integer32 | read-create | BSS_AIFSN parameter for Voice class |
| I32 wmeTableTxoplimitBe | 1.3.6.1.4.1.14125.1.2.40.1.1.27 | Integer32 | read-create | TXOPLIMIT parameter for Best effort class (in miliseconds) |
| I32 wmeTableTxoplimitBk | 1.3.6.1.4.1.14125.1.2.40.1.1.28 | Integer32 | read-create | TXOPLIMIT parameter for Background class (in miliseconds) |
| I32 wmeTableTxoplimitVi | 1.3.6.1.4.1.14125.1.2.40.1.1.29 | Integer32 | read-create | TXOPLIMIT parameter for Video class (in miliseconds) |
| I32 wmeTableTxoplimitVo | 1.3.6.1.4.1.14125.1.2.40.1.1.30 | Integer32 | read-create | TXOPLIMIT parameter for Voice class (in miliseconds) |
| I32 wmeTableBssTxoplimitBe | 1.3.6.1.4.1.14125.1.2.40.1.1.31 | Integer32 | read-create | BSS_TXOPLIMIT parameter for Best effort class (in miliseconds) |
| I32 wmeTableBssTxoplimitBk | 1.3.6.1.4.1.14125.1.2.40.1.1.32 | Integer32 | read-create | BSS_TXOPLIMIT parameter for Background class (in miliseconds) |
| I32 wmeTableBssTxoplimitVi | 1.3.6.1.4.1.14125.1.2.40.1.1.33 | Integer32 | read-create | BSS_TXOPLIMIT parameter for Video class (in miliseconds) |
| I32 wmeTableBssTxoplimitVo | 1.3.6.1.4.1.14125.1.2.40.1.1.34 | Integer32 | read-create | BSS_TXOPLIMIT parameter for Voice class (in miliseconds) |
| INT wmeTableAcmBe | 1.3.6.1.4.1.14125.1.2.40.1.1.35 | INTEGER | read-create | Enable / Disable Admission Control for Best effort class. |
| INT wmeTableAcmBk | 1.3.6.1.4.1.14125.1.2.40.1.1.36 | INTEGER | read-create | Enable / Disable Admission Control for Background class. |
| INT wmeTableAcmVi | 1.3.6.1.4.1.14125.1.2.40.1.1.37 | INTEGER | read-create | Enable / Disable Admission Control for Video class. |
| INT wmeTableAcmVo | 1.3.6.1.4.1.14125.1.2.40.1.1.38 | INTEGER | read-create | Enable / Disable Admission Control for Voice class. |
| INT wmeTableNoackpolicyBe | 1.3.6.1.4.1.14125.1.2.40.1.1.39 | INTEGER | read-create | Enable / Disable support for No-ack for Best effort class. |
| INT wmeTableNoackpolicyBk | 1.3.6.1.4.1.14125.1.2.40.1.1.40 | INTEGER | read-create | Enable / Disable support for No-ack for Background class. |
| INT wmeTableNoackpolicyVi | 1.3.6.1.4.1.14125.1.2.40.1.1.41 | INTEGER | read-create | Enable / Disable support for No-ack for Video class. |
| INT wmeTableNoackpolicyVo | 1.3.6.1.4.1.14125.1.2.40.1.1.42 | INTEGER | read-create | Enable / Disable support for No-ack for Voice class. |
| STR wmeTableComment | 1.3.6.1.4.1.14125.1.2.40.1.1.43 | DisplayString | read-create | An optional comment associated to the WME table. |
| INT wmeTableActive | 1.3.6.1.4.1.14125.1.2.40.1.1.44 | INTEGER | read-create | The status of the WME table entry. |
| ROW wmeTableRowStatus | 1.3.6.1.4.1.14125.1.2.40.1.1.45 | RowStatus | read-create | The row status in the WME table row |
| nodeConfigurationTm75 | 1.3.6.1.4.1.14125.1.2.41 | |||
| INT tm75Active | 1.3.6.1.4.1.14125.1.2.41.1 | INTEGER | read-write | Enable the TM75 temperature sensor |
| INT tm75Resolution | 1.3.6.1.4.1.14125.1.2.41.2 | INTEGER | read-write | Select the temperature conversion resolution |
| OCT tm75Temperature | 1.3.6.1.4.1.14125.1.2.41.3 | OCTET STRING | read-only | Current Temperature, with 4 digits floating point (-55..128) |
| nodeConfigurationNmsAddress | 1.3.6.1.4.1.14125.1.2.42 | |||
| nmsAddressTable | 1.3.6.1.4.1.14125.1.2.42.1 | not-accessible | This is the list of NMS servers that will be updated by the AP periodically. | |
| nmsAddressTableEntry | 1.3.6.1.4.1.14125.1.2.42.1.1 | not-accessible | Represent the entry in the NMS Address table. | |
| I32 nmsAddressTableIndex | 1.3.6.1.4.1.14125.1.2.42.1.1.1 | Integer32 | not-accessible | Specify the index of the NMS Address table. |
| STR nmsAddressTableAddress | 1.3.6.1.4.1.14125.1.2.42.1.1.2 | DisplayString | read-create | The DNS/IP Address of the NMS server. |
| I32 nmsAddressTablePort | 1.3.6.1.4.1.14125.1.2.42.1.1.3 | Integer32 | read-create | The NMS server port. |
| I32 nmsAddressTableInterval | 1.3.6.1.4.1.14125.1.2.42.1.1.4 | Integer32 | read-create | The AP update interval of that particular NMS server. |
| STR nmsAddressTableComment | 1.3.6.1.4.1.14125.1.2.42.1.1.5 | DisplayString | read-create | An optional description regarding the entry of the NMS Address table. |
| INT nmsAddressTableActive | 1.3.6.1.4.1.14125.1.2.42.1.1.6 | INTEGER | read-create | The status of the NMS Address table entry. |
| ROW nmsAddressTableRowStatus | 1.3.6.1.4.1.14125.1.2.42.1.1.7 | RowStatus | read-create | The row status in the NMS Address table entry. |
| nodeConfigurationUserDb | 1.3.6.1.4.1.14125.1.2.43 | |||
| STR userDbUsername | 1.3.6.1.4.1.14125.1.2.43.1 | DisplayString | read-write | The username of the user entry. |
| STR userDbPassword | 1.3.6.1.4.1.14125.1.2.43.2 | DisplayString | read-write | The login password for the username in the User database. |
| STR userDbGroupid | 1.3.6.1.4.1.14125.1.2.43.3 | DisplayString | read-write | The User Group id assign for the user in the database. |
| I32 userDbAddCmd | 1.3.6.1.4.1.14125.1.2.43.4 | Integer32 | read-write | SnmpSet this item to add the entry to the group, with the parameters stored in the temp folder |
| I32 userDbEditCmd | 1.3.6.1.4.1.14125.1.2.43.5 | Integer32 | read-write | SnmpSet this item to edit the entry in the group, with the parameters stored in the temp folder |
| I32 userDbDelCmd | 1.3.6.1.4.1.14125.1.2.43.6 | Integer32 | read-write | SnmpSet the id to delete the entry from the table |
| userDbTable | 1.3.6.1.4.1.14125.1.2.43.7 | not-accessible | This table contains the local user database. | |
| userDbTableEntry | 1.3.6.1.4.1.14125.1.2.43.7.1 | not-accessible | Represent the entry in the local user database table. | |
| I32 userDbTableIndex | 1.3.6.1.4.1.14125.1.2.43.7.1.1 | Integer32 | not-accessible | Specify the index of the user group table. |
| STR userDbTableName | 1.3.6.1.4.1.14125.1.2.43.7.1.2 | DisplayString | read-only | The name of the user |
| STR userDbTablePassword | 1.3.6.1.4.1.14125.1.2.43.7.1.3 | DisplayString | read-only | The login password for the username |
| I32 userDbTableGid | 1.3.6.1.4.1.14125.1.2.43.7.1.4 | Integer32 | read-only | The group id used for the username |
| INT userDbTableStatus | 1.3.6.1.4.1.14125.1.2.43.7.1.5 | INTEGER | read-only | The default download bandwidth of the entry |
| nodeConfigurationUserGroup | 1.3.6.1.4.1.14125.1.2.44 | |||
| STR userGroupId | 1.3.6.1.4.1.14125.1.2.44.1 | DisplayString | read-write | The ID number of the User Group. |
| STR userGroupName | 1.3.6.1.4.1.14125.1.2.44.2 | DisplayString | read-write | The Name of the User Group. |
| STR userGroupLanguage | 1.3.6.1.4.1.14125.1.2.44.3 | DisplayString | read-write | The default language of the User Group. |
| STR userGroupUpload | 1.3.6.1.4.1.14125.1.2.44.4 | DisplayString | read-write | The upload bandwidth of the User Group. |
| STR userGroupDownload | 1.3.6.1.4.1.14125.1.2.44.5 | DisplayString | read-write | The download bandwidth of the User Group. |
| STR userGroupIdleTimeout | 1.3.6.1.4.1.14125.1.2.44.6 | DisplayString | read-write | The default idle timeout of the User Group. |
| STR userGroupSessionTimeout | 1.3.6.1.4.1.14125.1.2.44.7 | DisplayString | read-write | The default session timeout of the User Group. |
| STR userGroupUrl | 1.3.6.1.4.1.14125.1.2.44.8 | DisplayString | read-write | The default URL to direct to for the user in this User Group. |
| STR userGroupComment | 1.3.6.1.4.1.14125.1.2.44.9 | DisplayString | read-write | The optional comment for the User Group. |
| I32 userGroupAddCmd | 1.3.6.1.4.1.14125.1.2.44.10 | Integer32 | read-write | SnmpSet this item to add the entry to the group, with the parameters stored in the temp folder |
| I32 userGroupEditCmd | 1.3.6.1.4.1.14125.1.2.44.11 | Integer32 | read-write | SnmpSet this item to edit the entry in the group, with the parameters stored in the temp folder |
| I32 userGroupDelCmd | 1.3.6.1.4.1.14125.1.2.44.12 | Integer32 | read-write | SnmpSet the id to delete the entry from the group |
| userGroupTable | 1.3.6.1.4.1.14125.1.2.44.13 | not-accessible | This table contains the local user group. | |
| userGroupTableEntry | 1.3.6.1.4.1.14125.1.2.44.13.1 | not-accessible | Represent the entry in the user group table. | |
| I32 userGroupTableIndex | 1.3.6.1.4.1.14125.1.2.44.13.1.1 | Integer32 | not-accessible | Specify the index of the user group table. |
| I32 userGroupTableGid | 1.3.6.1.4.1.14125.1.2.44.13.1.2 | Integer32 | read-only | The group id of the entry |
| STR userGroupTableName | 1.3.6.1.4.1.14125.1.2.44.13.1.3 | DisplayString | read-only | The group name of the entry |
| STR userGroupTableLanguage | 1.3.6.1.4.1.14125.1.2.44.13.1.4 | DisplayString | read-only | The group's default language of the entry |
| I32 userGroupTableUpload | 1.3.6.1.4.1.14125.1.2.44.13.1.5 | Integer32 | read-only | The default upload bandwidth of the entry |
| I32 userGroupTableDownload | 1.3.6.1.4.1.14125.1.2.44.13.1.6 | Integer32 | read-only | The default download bandwidth of the entry |
| I32 userGroupTableIdleTimeout | 1.3.6.1.4.1.14125.1.2.44.13.1.7 | Integer32 | read-only | The default idle timeout of the entry |
| I32 userGroupTableSessTimeout | 1.3.6.1.4.1.14125.1.2.44.13.1.8 | Integer32 | read-only | The default session timeout of the entry |
| STR userGroupTableUrl | 1.3.6.1.4.1.14125.1.2.44.13.1.9 | DisplayString | read-only | The redirect URL for the entry |
| STR userGroupTableComment | 1.3.6.1.4.1.14125.1.2.44.13.1.10 | DisplayString | read-only | The group's optional comment |
| nodeConfigurationStatickey | 1.3.6.1.4.1.14125.1.2.45 | |||
| OCT statickeyWifi0Key0 | 1.3.6.1.4.1.14125.1.2.45.1 | OCTET STRING | read-write | Static Key 0 for Wifi0 |
| OCT statickeyWifi0Key1 | 1.3.6.1.4.1.14125.1.2.45.2 | OCTET STRING | read-write | Static Key 1 for Wifi0 |
| OCT statickeyWifi0Key2 | 1.3.6.1.4.1.14125.1.2.45.3 | OCTET STRING | read-write | Static Key 2 for Wifi0 |
| OCT statickeyWifi0Key3 | 1.3.6.1.4.1.14125.1.2.45.4 | OCTET STRING | read-write | Static Key 3 for Wifi0 |
| OCT statickeyWifi1Key0 | 1.3.6.1.4.1.14125.1.2.45.5 | OCTET STRING | read-write | Static Key 0 for Wifi1 |
| OCT statickeyWifi1Key1 | 1.3.6.1.4.1.14125.1.2.45.6 | OCTET STRING | read-write | Static Key 1 for Wifi1 |
| OCT statickeyWifi1Key2 | 1.3.6.1.4.1.14125.1.2.45.7 | OCTET STRING | read-write | Static Key 2 for Wifi1 |
| OCT statickeyWifi1Key3 | 1.3.6.1.4.1.14125.1.2.45.8 | OCTET STRING | read-write | Static Key 3 for Wifi1 |
| nodeConfigurationDhcrelay | 1.3.6.1.4.1.14125.1.2.46 | |||
| INT dhcrelayActive | 1.3.6.1.4.1.14125.1.2.46.1 | INTEGER | read-write | Enable/Disable the DHCP Relay. |
| I32 dhcrelayPort | 1.3.6.1.4.1.14125.1.2.46.2 | Integer32 | read-write | DHCP Relay Port. |
| I32 dhcrelayHopcount | 1.3.6.1.4.1.14125.1.2.46.3 | Integer32 | read-write | Maximum hop count before the packet is dropped. |
| I32 dhcrelayPktsize | 1.3.6.1.4.1.14125.1.2.46.4 | Integer32 | read-write | Maximum Packet size for the DHCP discover. |
| dhcrelayTable | 1.3.6.1.4.1.14125.1.2.46.5 | not-accessible | This is the DHCP Relay table. | |
| dhcrelayTableEntry | 1.3.6.1.4.1.14125.1.2.46.5.1 | not-accessible | Represent the entry in the DHCP Relay table. | |
| I32 dhcrelayTableIndex | 1.3.6.1.4.1.14125.1.2.46.5.1.1 | Integer32 | not-accessible | Specify the index of the DHCP Relay table. |
| INT dhcrelayTableType | 1.3.6.1.4.1.14125.1.2.46.5.1.2 | INTEGER | read-create | The type of this DHCP Relay table entry. |
| STR dhcrelayTableExtra | 1.3.6.1.4.1.14125.1.2.46.5.1.3 | DisplayString | read-create | Extra information for the type, eg for server(1)-ip address, or interface(2)-interface name. |
| STR dhcrelayTableComments | 1.3.6.1.4.1.14125.1.2.46.5.1.4 | DisplayString | read-create | An optional description regarding the entry of the DHCP Relay table. |
| INT dhcrelayTableActive | 1.3.6.1.4.1.14125.1.2.46.5.1.5 | INTEGER | read-create | The status of the DHCP Relay table entry. |
| ROW dhcrelayTableRowStatus | 1.3.6.1.4.1.14125.1.2.46.5.1.6 | RowStatus | read-create | The row status in the DHCP Relay table entry. |
| nodeConfigurationMulticast | 1.3.6.1.4.1.14125.1.2.47 | |||
| INT multicastActive | 1.3.6.1.4.1.14125.1.2.47.1 | INTEGER | read-write | Enable/Disable the Multicast. |
| nodeConfigurationOspfd | 1.3.6.1.4.1.14125.1.2.48 | |||
| INT ospfdActive | 1.3.6.1.4.1.14125.1.2.48.1 | INTEGER | read-write | Enable/Disable the OSPF. |
| nodeConfigurationEbtables | 1.3.6.1.4.1.14125.1.2.49 | |||
| INT ebtablesActive | 1.3.6.1.4.1.14125.1.2.49.1 | INTEGER | read-write | Enable/Disable the ebtables. |
| ebTable | 1.3.6.1.4.1.14125.1.2.49.2 | not-accessible | This is the Ebtable rules. | |
| ebTableEntry | 1.3.6.1.4.1.14125.1.2.49.2.1 | not-accessible | Represent the entry in the ebtables. | |
| I32 ebTableIndex | 1.3.6.1.4.1.14125.1.2.49.2.1.1 | Integer32 | not-accessible | Specify the index of the ebtables. |
| INT ebTableTarget | 1.3.6.1.4.1.14125.1.2.49.2.1.2 | INTEGER | read-create | Select the type of this rule: allow or deny . |
| OCT ebTableSrcIface | 1.3.6.1.4.1.14125.1.2.49.2.1.3 | OCTET STRING | read-create | Source Interface |
| OCT ebTableDstIface | 1.3.6.1.4.1.14125.1.2.49.2.1.4 | OCTET STRING | read-create | Destination Interface |
| INT ebTableMatchMac | 1.3.6.1.4.1.14125.1.2.49.2.1.5 | INTEGER | read-create | Enable or disable the MAC matching. |
| MAC ebTableSrcMac | 1.3.6.1.4.1.14125.1.2.49.2.1.6 | MacAddress | read-create | Source MAC Address |
| MAC ebTableDstMac | 1.3.6.1.4.1.14125.1.2.49.2.1.7 | MacAddress | read-create | Destination MAC Address |
| INT ebTableProtocol | 1.3.6.1.4.1.14125.1.2.49.2.1.8 | INTEGER | read-create | The protocol type. |
| IP ebTableSrcIp | 1.3.6.1.4.1.14125.1.2.49.2.1.9 | IpAddress | read-create | Source IP Address |
| IP ebTableSrcMask | 1.3.6.1.4.1.14125.1.2.49.2.1.10 | IpAddress | read-create | Source netmask |
| IP ebTableDstIp | 1.3.6.1.4.1.14125.1.2.49.2.1.11 | IpAddress | read-create | Destination IP Address |
| IP ebTableDstMask | 1.3.6.1.4.1.14125.1.2.49.2.1.12 | IpAddress | read-create | Destination netmask |
| INT ebTableIpProt | 1.3.6.1.4.1.14125.1.2.49.2.1.13 | INTEGER | read-create | The protocol type. |
| I32 ebTableSrcPortStart | 1.3.6.1.4.1.14125.1.2.49.2.1.14 | Integer32 | read-create | Start of Source port |
| I32 ebTableSrcPortEnd | 1.3.6.1.4.1.14125.1.2.49.2.1.15 | Integer32 | read-create | End of Source port |
| I32 ebTableDstPortStart | 1.3.6.1.4.1.14125.1.2.49.2.1.16 | Integer32 | read-create | Start of Destination port |
| I32 ebTableDstPortEnd | 1.3.6.1.4.1.14125.1.2.49.2.1.17 | Integer32 | read-create | End of Destination port |
| I32 ebTableVlanid | 1.3.6.1.4.1.14125.1.2.49.2.1.18 | Integer32 | read-create | VLAN ID |
| STR ebTableComments | 1.3.6.1.4.1.14125.1.2.49.2.1.19 | DisplayString | read-create | Optional comment |
| INT ebTableActive | 1.3.6.1.4.1.14125.1.2.49.2.1.20 | INTEGER | read-create | The status of the ebtables entry. |
| ROW ebTableRowStatus | 1.3.6.1.4.1.14125.1.2.49.2.1.21 | RowStatus | read-create | The row status in the ebtable entry. |
| nodeCommand | 1.3.6.1.4.1.14125.1.3 | |||
| nodeCommandReboot | 1.3.6.1.4.1.14125.1.3.1 | |||
| I32 rebootTime | 1.3.6.1.4.1.14125.1.3.1.1 | Integer32 | read-write | Set a value of timeout (1~300, in seconds) and reboot the device. |
| nodeCommandReset | 1.3.6.1.4.1.14125.1.3.2 | |||
| I32 resetToDefault | 1.3.6.1.4.1.14125.1.3.2.1 | Integer32 | read-write | SnmpSet this command to reset the device back to factory default value. |
| nodeCommandUpload | 1.3.6.1.4.1.14125.1.3.3 | |||
| STR uploadDownloadFilename | 1.3.6.1.4.1.14125.1.3.3.1 | DisplayString | read-write | The name of the file that wished to be upload/download through TFTP |
| INT uploadDownloadFiletype | 1.3.6.1.4.1.14125.1.3.3.2 | INTEGER | read-write | The type of the file |
| IP uploadDownloadIpaddress | 1.3.6.1.4.1.14125.1.3.3.3 | IpAddress | read-write | The TFTP IP Address |
| STR uploadDownloadPassword | 1.3.6.1.4.1.14125.1.3.3.4 | DisplayString | read-write | The password used for extract the certificate file |
| INT uploadDownloadOperationtype | 1.3.6.1.4.1.14125.1.3.3.5 | INTEGER | read-write | The type of TFTP operation to be done |
| INT uploadDownloadExecutetftp | 1.3.6.1.4.1.14125.1.3.3.6 | INTEGER | read-write | Execute the TFTP operation by setting this command to value 1 |
| nodeCommandLogoutBlock | 1.3.6.1.4.1.14125.1.3.4 | |||
| IP logoutAndBlockAction | 1.3.6.1.4.1.14125.1.3.4.1 | IpAddress | read-write | SnmpSet to logout and block the user with the IP address. |
| nodeCommandRestartSnmp | 1.3.6.1.4.1.14125.1.3.5 | |||
| I32 restartSnmpService | 1.3.6.1.4.1.14125.1.3.5.1 | Integer32 | read-write | SnmpSet to restart the SNMP Service. |
RFC description
Manages mesh network configuration including routing, wireless security, and system operations.
Start monitoring EnGenius wireless mesh access point with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.