ELTEX-IPSLA-MIB

All MIBs › ELTEX-IPSLA-MIB

Organization: Eltex Ltd.

Last Updated: 2015-05-25

Category: Technology: SLA/OAM, Vendor: Eltex

Description: Eltex IP SLA MIB for configuring and monitoring IP service level agreement probes measuring network performance metrics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is ELTEX-IPSLA-MIB?

ELTEX-IPSLA-MIB is a vendor-specific MIB from Eltex Enterprise implementing IP Service Level Agreement style active network-performance probing, similar in spirit to Cisco's IP SLA feature, covering ICMP echo and UDP jitter measurement operations. It exposes an administrative control table defining each SLA probe's type, frequency, tag, owner and row status, plus protocol-specific tables such as ICMP echo administration and a UDP jitter responder configuration. Its monitoring purpose is network performance/software status: by configuring and reading back eltexIpSlaAdminCtrlTable entries an operator tracks whether scheduled latency/jitter probes are running (eltexIpSlaAdminCtrlStatus) and at what frequency, revealing degraded WAN/link performance such as elevated round-trip time or jitter before it affects real traffic. It parallels but does not directly reuse the IETF DISMAN-PING model or Cisco's CISCO-RTTMON-MIB, implementing similar functionality independently. It is deployed on Eltex Enterprise routers/switches used for proactive WAN and service-level performance monitoring. Engineers can download the ELTEX-IPSLA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in ELTEX-IPSLA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Eltex Enterprise routers and switches

Monitoring Examples

An operator provisions eltexIpSlaAdminCtrlTable/eltexIpSlaAdminCtrlEntry (indexed by eltexIpSlaAdminCtrlIndex) with eltexIpSlaAdminCtrlType set for ICMP echo and eltexIpSlaAdminCtrlFrequency set to poll every few seconds, then checks eltexIpSlaAdminCtrlStatus to confirm the probe is active. eltexIpSlaAdminIcmpEchoTable/eltexIpSlaAdminIcmpEchoEntry results are reviewed for rising round-trip times indicating WAN congestion, while eltexIpSlaApplResponderUdpJitterPort confirms the UDP jitter responder is listening on the expected port for jitter measurement sessions initiated from a remote probe.

What Can Be Monitored

configured SLA probe type and frequency
SLA probe operational status
ICMP echo round-trip results
UDP jitter responder configuration
probe owner/tag metadata

Imported Objects

From ELTEX-SMI-ACTUAL

eltexLtd

MODULE-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From SNMPv2-SMI

Counter32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using eltexIpSlaStatsIcmpEchoOperationsCtr OID:

Select an Eltex Enterprise router/switch (IP SLA active probing) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type eltexIpSlaStatsIcmpEchoOperationsCtr into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Indicates the number of all operations which were tried to perform. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
eltexIpSlaMIB	1.3.6.1.4.1.35265.32			This module defines a MIB for IP Service Level Agreements Application. IP SLA operations allows to analyze IP service levels by using active traffic monitoring. Each of IP SLA operation is described by protocol it uses and type of performance metric. IP SLA Objects \|--- Application Group \| \|--- Responder Administration \| \|--- UDP Jitter Responder Defenitions \| \|--- Administration Group \| \|--- Overall Control Administration \| \|--- ICMP Echo Administration Definitions \| \|--- UDP Jitter Administration Definitions \| \|--- Statistics Collection Group \| \|--- Overall Control Statistics \| \|--- ICMP Echo Statistics Definitions \| \|--- UDP Jitter Statistics Definitions \| \|--- Schedule Configuration \| \|--- History Collection Group IP SLA Notifications \|
eltexIpSlaObjects	1.3.6.1.4.1.35265.32.1
eltexIpSlaAppl	1.3.6.1.4.1.35265.32.1.1
eltexIpSlaApplResponder	1.3.6.1.4.1.35265.32.1.1.13
INT eltexIpSlaApplResponderUdpJitterPort	1.3.6.1.4.1.35265.32.1.1.13.1	INTEGER	read-write	Defines UDP port number which is listened by IP SLA responder for UDP Jitter operations
eltexIpSlaAdmin	1.3.6.1.4.1.35265.32.1.2
eltexIpSlaAdminCtrlTable	1.3.6.1.4.1.35265.32.1.2.1		read-write	A table of IP SLA overall control administration definitions. The IP SLA control is located in multiple tables. This first table defines the most common SLA configuration. The following tables contain objects which configure scheduling, information gathering, and notification generation. All of these tables using this table's index as their own.
eltexIpSlaAdminCtrlEntry	1.3.6.1.4.1.35265.32.1.2.1.1		read-write	A row entry representing a single IP SLA operation.
INT eltexIpSlaAdminCtrlIndex	1.3.6.1.4.1.35265.32.1.2.1.1.1	INTEGER	read-write	This field specifies index for all IP SLA tables. Rows with identic index in each of following tables describes the same IP SLA operation as this table does.
ELT eltexIpSlaAdminCtrlType	1.3.6.1.4.1.35265.32.1.2.1.1.2	EltexIpSlaOperationType	read-write	This field specifies type of IP SLA operation.
ELT eltexIpSlaAdminCtrlStatus	1.3.6.1.4.1.35265.32.1.2.1.1.3	EltexIpSlaOperationStatus	read-only	This field specifies status of IP SLA operation.
INT eltexIpSlaAdminCtrlFrequency	1.3.6.1.4.1.35265.32.1.2.1.1.4	INTEGER	read-write	Specifies the duration between initiating each IP SLA operation. This object cannot be set to a value which would be a shorter duration than operation timeout.
STR eltexIpSlaAdminCtrlTag	1.3.6.1.4.1.35265.32.1.2.1.1.5	DisplayString	read-write	The field provides description tag for IP SLA operation.
STR eltexIpSlaAdminCtrlOwner	1.3.6.1.4.1.35265.32.1.2.1.1.6	DisplayString	read-write	The field describes owner of the IP SLA operation.
ROW eltexIpSlaAdminCtrlRowStatus	1.3.6.1.4.1.35265.32.1.2.1.1.7	RowStatus	read-write	The status of the MIB entry.
eltexIpSlaAdminIcmpEchoTable	1.3.6.1.4.1.35265.32.1.2.2		read-write	A table of ICMP Echo operation definitions.
eltexIpSlaAdminIcmpEchoEntry	1.3.6.1.4.1.35265.32.1.2.2.1		read-write	A row entry representing a single ICMP Echo operation.
INT eltexIpSlaAdminIcmpEchoIndex	1.3.6.1.4.1.35265.32.1.2.2.1.1	INTEGER	read-write	This field specifies index for ICMP Echo operation. Index of each row must match the index in eltexIpSlaAdminCtrl table.
IP eltexIpSlaAdminIcmpEchoTargetAddress	1.3.6.1.4.1.35265.32.1.2.2.1.2	IpAddress	read-write	A string which specifies IP address of the destination.
IP eltexIpSlaAdminIcmpEchoSourceAddress	1.3.6.1.4.1.35265.32.1.2.2.1.3	IpAddress	read-write	A string which specifies the source IP address.
NUM eltexIpSlaAdminIcmpEchoSourceInterface	1.3.6.1.4.1.35265.32.1.2.2.1.4	InterfaceIndexOrZero	read-write	A string which specifies the source interface.
INT eltexIpSlaAdminIcmpEchoTimeOut	1.3.6.1.4.1.35265.32.1.2.2.1.5	INTEGER	read-write	Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
INT eltexIpSlaAdminIcmpEchoReqDataSize	1.3.6.1.4.1.35265.32.1.2.2.1.6	INTEGER	read-write	This object represents the number of octets to be placed into packages send during IP SLA operation
INT eltexIpSlaAdminIcmpEchoTOS	1.3.6.1.4.1.35265.32.1.2.2.1.7	INTEGER	read-write	This object represents the type of service octet in an IP header.
ROW eltexIpSlaAdminIcmpEchoRowStatus	1.3.6.1.4.1.35265.32.1.2.2.1.8	RowStatus	read-write	The status of the MIB entry.
eltexIpSlaAdminUdpJitterTable	1.3.6.1.4.1.35265.32.1.2.3		read-write	A table of UDP Jitter operation definitions.
eltexIpSlaAdminUdpJitterEntry	1.3.6.1.4.1.35265.32.1.2.3.1		read-write	A row entry representing a single UDP Jitter operation.
INT eltexIpSlaAdminUdpJitterIndex	1.3.6.1.4.1.35265.32.1.2.3.1.1	INTEGER	read-write	This field specifies index for UdpJitter operation. Index of each row must match the index in eltexIpSlaAdminCtrl table.
IP eltexIpSlaAdminUdpJitterTargetAddress	1.3.6.1.4.1.35265.32.1.2.3.1.2	IpAddress	read-write	A string which specifies IP address of the destination.
INT eltexIpSlaAdminUdpJitterTargetPort	1.3.6.1.4.1.35265.32.1.2.3.1.3	INTEGER	read-write	A number of destination UDP port.
IP eltexIpSlaAdminUdpJitterSourceAddress	1.3.6.1.4.1.35265.32.1.2.3.1.4	IpAddress	read-write	A string which specifies the source IP address.
INT eltexIpSlaAdminUdpJitterSourcePort	1.3.6.1.4.1.35265.32.1.2.3.1.5	INTEGER	read-write	A number of source UDP port.
NUM eltexIpSlaAdminUdpJitterSourceInterface	1.3.6.1.4.1.35265.32.1.2.3.1.6	InterfaceIndexOrZero	read-write	A string which specifies the source interface.
INT eltexIpSlaAdminUdpJitterInterval	1.3.6.1.4.1.35265.32.1.2.3.1.7	INTEGER	read-write	This value represents the inter-packet delay between packets and is in milliseconds. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
INT eltexIpSlaAdminUdpJitterNumPackets	1.3.6.1.4.1.35265.32.1.2.3.1.8	INTEGER	read-write	This value represents the number of packets that need to be transmitted. This value is currently used for Jitter probe. This object is applicable to jitter probe only.
INT eltexIpSlaAdminUdpJitterTimeOut	1.3.6.1.4.1.35265.32.1.2.3.1.9	INTEGER	read-write	Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
INT eltexIpSlaAdminUdpJitterReqDataSize	1.3.6.1.4.1.35265.32.1.2.3.1.10	INTEGER	read-write	This object represents the number of octets to be placed into packages send during IP SLA operation
INT eltexIpSlaAdminUdpJitterTOS	1.3.6.1.4.1.35265.32.1.2.3.1.11	INTEGER	read-write	This object represents the type of service octet in an IP header.
ROW eltexIpSlaAdminUdpJitterRowStatus	1.3.6.1.4.1.35265.32.1.2.3.1.12	RowStatus	read-write	The status of the MIB entry.
eltexIpSlaStats	1.3.6.1.4.1.35265.32.1.3
eltexIpSlaStatsIcmpEchoTable	1.3.6.1.4.1.35265.32.1.3.2		read-write	The database of ICMP Echo operation statistics.
eltexIpSlaStatsIcmpEchoEntry	1.3.6.1.4.1.35265.32.1.3.2.1		read-write	A row entry representing an IP SLA operation.
INT eltexIpSlaStatsIcmpEchoIndex	1.3.6.1.4.1.35265.32.1.3.2.1.1	INTEGER	read-write	The index of ICMP Echo statistics row. It matches the indexes of operations in the Overall Control Group tables.
ELT eltexIpSlaStatsIcmpEchoLastStatus	1.3.6.1.4.1.35265.32.1.3.2.1.2	EltexIpSlaStatsOperStatus	read-only	The string contains a status of the last completed operation.
INT eltexIpSlaStatsIcmpEchoLastLatency	1.3.6.1.4.1.35265.32.1.3.2.1.3	INTEGER	read-only	A latency measured during the last completed operation.
INT eltexIpSlaStatsIcmpEchoMinLatency	1.3.6.1.4.1.35265.32.1.3.2.1.4	INTEGER	read-only	The lowest latency measured during all successfully completed operations.
INT eltexIpSlaStatsIcmpEchoAvgLatency	1.3.6.1.4.1.35265.32.1.3.2.1.5	INTEGER	read-only	The average of latencies measured during all successfully completed operations.
INT eltexIpSlaStatsIcmpEchoMaxLatency	1.3.6.1.4.1.35265.32.1.3.2.1.6	INTEGER	read-only	The highest of latencies measured during all successfully completed operations.
C32 eltexIpSlaStatsIcmpEchoOperationsCtrEx	1.3.6.1.4.1.35265.32.1.3.2.1.7	Counter32	read-only	Indicates the number of all operations which were tried to perform.
C32 eltexIpSlaStatsIcmpEchoSuccessesCtr	1.3.6.1.4.1.35265.32.1.3.2.1.8	Counter32	read-only	Indicates the number of successfully completed operations.
C32 eltexIpSlaStatsIcmpEchoFailuresCtr	1.3.6.1.4.1.35265.32.1.3.2.1.9	Counter32	read-only	Indicates the number of unsuccessfully completed operations.
C32 eltexIpSlaStatsIcmpEchoTimeoutCtr	1.3.6.1.4.1.35265.32.1.3.2.1.10	Counter32	read-only	Indicates the number of operations which were failed by timeout.
C32 eltexIpSlaStatsIcmpEchoUnreachNetCtr	1.3.6.1.4.1.35265.32.1.3.2.1.11	Counter32	read-only	Indicates the number of operations which were failed due to unreachable net.
C32 eltexIpSlaStatsIcmpEchoUnreachHostCtr	1.3.6.1.4.1.35265.32.1.3.2.1.12	Counter32	read-only	Indicates the number of operations which were failed due to unreachable host.
C32 eltexIpSlaStatsIcmpEchoUnreachProtCtr	1.3.6.1.4.1.35265.32.1.3.2.1.13	Counter32	read-only	Indicates the number of operations which were failed due to unreachable protocol.
C32 eltexIpSlaStatsIcmpEchoExTimeTransCtr	1.3.6.1.4.1.35265.32.1.3.2.1.14	Counter32	read-only	Indicates the number of operations which were failed due to exceeded TTL in transit.
C32 eltexIpSlaStatsIcmpEchoExTimeReassCtr	1.3.6.1.4.1.35265.32.1.3.2.1.15	Counter32	read-only	Indicates the number of operations which were failed due to exceeded time of fragment reassembly.
C32 eltexIpSlaStatsIcmpEchoUnableSendCtr	1.3.6.1.4.1.35265.32.1.3.2.1.16	Counter32	read-only	Indicates the number of operations which were failed while sending a request packet.
C32 eltexIpSlaStatsIcmpEchoBadReplyCtr	1.3.6.1.4.1.35265.32.1.3.2.1.17	Counter32	read-only	Indicates the number of operations which were failed due to bad reply data.
eltexIpSlaStatsUdpJitterTable	1.3.6.1.4.1.35265.32.1.3.3		read-write	The database of UDP Jitter operation statistics.
eltexIpSlaStatsUdpJitterEntry	1.3.6.1.4.1.35265.32.1.3.3.1		read-write	A row entry representing an IP SLA operation.
INT eltexIpSlaStatsUdpJitterIndex	1.3.6.1.4.1.35265.32.1.3.3.1.1	INTEGER	read-write	The index of UDP Jitter statistics row. It matches the indexes of operations in the Overall Control Group tables.
ELT eltexIpSlaStatsUdpJitterLastStatus	1.3.6.1.4.1.35265.32.1.3.3.1.2	EltexIpSlaStatsOperStatus	read-only	The string contains a status of the last completed operation.
INT eltexIpSlaStatsUdpJitterLastLatency	1.3.6.1.4.1.35265.32.1.3.3.1.3	INTEGER	read-only	A two-way latency measured during the last completed operation.
INT eltexIpSlaStatsUdpJitterNumLatency	1.3.6.1.4.1.35265.32.1.3.3.1.4	INTEGER	read-only	The number of two-way latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumLatency	1.3.6.1.4.1.35265.32.1.3.3.1.5	INTEGER	read-only	The sum of two-way latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinLatency	1.3.6.1.4.1.35265.32.1.3.3.1.6	INTEGER	read-only	The lowest two-way latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgLatency	1.3.6.1.4.1.35265.32.1.3.3.1.7	INTEGER	read-only	The average of two-way latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxLatency	1.3.6.1.4.1.35265.32.1.3.3.1.8	INTEGER	read-only	The highest of two-way latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumSDLatency	1.3.6.1.4.1.35265.32.1.3.3.1.9	INTEGER	read-only	The number of one-way source-to-destination latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumSDLatency	1.3.6.1.4.1.35265.32.1.3.3.1.10	INTEGER	read-only	The sum of one-way source-to-destination latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinSDLatency	1.3.6.1.4.1.35265.32.1.3.3.1.11	INTEGER	read-only	The lowest one-way source-to-destination latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgSDLatency	1.3.6.1.4.1.35265.32.1.3.3.1.12	INTEGER	read-only	The average one-way source-to-destination latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxSDLatency	1.3.6.1.4.1.35265.32.1.3.3.1.13	INTEGER	read-only	The maximum one-way source-to-destination latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumDSLatency	1.3.6.1.4.1.35265.32.1.3.3.1.14	INTEGER	read-only	The number of one-way destination-to-source latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumDSLatency	1.3.6.1.4.1.35265.32.1.3.3.1.15	INTEGER	read-only	The sum of one-way destination-to-source latencies measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinDSLatency	1.3.6.1.4.1.35265.32.1.3.3.1.16	INTEGER	read-only	The lowest one-way destination-to-source latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgDSLatency	1.3.6.1.4.1.35265.32.1.3.3.1.17	INTEGER	read-only	The average one-way destination-to-source latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxDSLatency	1.3.6.1.4.1.35265.32.1.3.3.1.18	INTEGER	read-only	The maximum one-way destination-to-source latency measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumSDPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.19	INTEGER	read-only	The number of one-way source-to-destination positive jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumSDPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.20	INTEGER	read-only	The sum of one-way source-to-destination positive jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinSDPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.21	INTEGER	read-only	The lowest one-way source-to-destination positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgSDPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.22	INTEGER	read-only	The average one-way source-to-destination positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxSDPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.23	INTEGER	read-only	The maximum one-way source-to-destination positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumDSPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.24	INTEGER	read-only	The number of one-way destination-to-source positive jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumDSPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.25	INTEGER	read-only	The sum of one-way destination-to-source positive jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinDSPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.26	INTEGER	read-only	The lowest one-way destination-to-source positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgDSPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.27	INTEGER	read-only	The average one-way destination-to-source positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxDSPosJitter	1.3.6.1.4.1.35265.32.1.3.3.1.28	INTEGER	read-only	The maximum one-way destination-to-source positive jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumSDNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.29	INTEGER	read-only	The number of one-way source-to-destination negative jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumSDNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.30	INTEGER	read-only	The sum of one-way source-to-destination negative jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinSDNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.31	INTEGER	read-only	The lowest one-way source-to-destination negative jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgSDNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.32	INTEGER	read-only	The average one-way source-to-destination negative jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxSDNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.33	INTEGER	read-only	The maximum one-way source-to-destination negative jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterNumDSNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.34	INTEGER	read-only	The number of one-way destination-to-source negative jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterSumDSNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.35	INTEGER	read-only	The sum oflowest one-way destination-to-source negative jitters measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMinDSNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.36	INTEGER	read-only	The lowest one-way destination-to-source negative jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterAvgDSNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.37	INTEGER	read-only	The average one-way destination-to-source negative jitter measured during all successfully completed operations.
INT eltexIpSlaStatsUdpJitterMaxDSNegJitter	1.3.6.1.4.1.35265.32.1.3.3.1.38	INTEGER	read-only	The maximum one-way destination-to-source negative jitter measured during all successfully completed operations.
C32 eltexIpSlaStatsUdpJitterOperationsCtr	1.3.6.1.4.1.35265.32.1.3.3.1.39	Counter32	read-only	Indicates the number of all operations which were tried to perform.
C32 eltexIpSlaStatsUdpJitterSuccessesCtr	1.3.6.1.4.1.35265.32.1.3.3.1.40	Counter32	read-only	Indicates the number of successfully completed operations.
C32 eltexIpSlaStatsUdpJitterFailuresCtr	1.3.6.1.4.1.35265.32.1.3.3.1.41	Counter32	read-only	Indicates the number of unsuccessfully completed operations.
C32 eltexIpSlaStatsUdpJitterTimeoutCtr	1.3.6.1.4.1.35265.32.1.3.3.1.42	Counter32	read-only	Indicates the number of operations which were failed by timeout.
C32 eltexIpSlaStatsUdpJitterUnreachNetCtr	1.3.6.1.4.1.35265.32.1.3.3.1.43	Counter32	read-only	Indicates the number of operations which were failed due to unreachable net.
C32 eltexIpSlaStatsUdpJitterUnreachHostCtr	1.3.6.1.4.1.35265.32.1.3.3.1.44	Counter32	read-only	Indicates the number of operations which were failed due to unreachable host.
C32 eltexIpSlaStatsUdpJitterUnreachPortCtr	1.3.6.1.4.1.35265.32.1.3.3.1.45	Counter32	read-only	Indicates the number of operations which were failed due to unreachable UDP port.
C32 eltexIpSlaStatsUdpJitterUnreachProtCtr	1.3.6.1.4.1.35265.32.1.3.3.1.46	Counter32	read-only	Indicates the number of operations which were failed due to unreachable protocol.
C32 eltexIpSlaStatsUdpJitterExTimeTransCtr	1.3.6.1.4.1.35265.32.1.3.3.1.47	Counter32	read-only	Indicates the number of operations which were failed due to exceeded TTL in transit.
C32 eltexIpSlaStatsUdpJitterExTimeReassCtr	1.3.6.1.4.1.35265.32.1.3.3.1.48	Counter32	read-only	Indicates the number of operations which were failed due to exceeded time of fragment reassembly.
C32 eltexIpSlaStatsUdpJitterUnableSendCtr	1.3.6.1.4.1.35265.32.1.3.3.1.49	Counter32	read-only	Indicates the number of operations which were failed while sending a request packet.
C32 eltexIpSlaStatsUdpJitterBadReplyCtr	1.3.6.1.4.1.35265.32.1.3.3.1.50	Counter32	read-only	Indicates the number of operations which were failed due to bad reply data.
C32 eltexIpSlaStatsUdpJitterPacketsOOSCtr	1.3.6.1.4.1.35265.32.1.3.3.1.51	Counter32	read-only	Indicates the number of packets recievied out of sequence.
eltexIpSlaSchedule	1.3.6.1.4.1.35265.32.1.4
INT eltexIpSlaScheduleStartTrigger	1.3.6.1.4.1.35265.32.1.4.1	INTEGER	read-write	Writing operation's index in this scalar triggers starting of the operation.
INT eltexIpSlaScheduleStopTrigger	1.3.6.1.4.1.35265.32.1.4.2	INTEGER	read-write	Writing operation's index in this scalar triggers stopping of the operation.

RFC description

Manages IP Service Level Agreement (IP SLA) operations for active traffic monitoring and performance metric analysis on Eltex devices.

Start monitoring Eltex Enterprise router/switch (IP SLA active probing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download ELTEX-IPSLA-MIB