| OID symbolic | OID numeric | Type | Access | Description |
|---|
| cabletron | 1.3.6.1.4.1.52 | | | |
| commsDevice | 1.3.6.1.4.1.52.1 | | | |
| efdmimBdgPortEntry | 1.3.6.1.4.1.52.1.6.4.1.2.1 | | not-accessible | This is an individual entry in the bridge port table.
Note that each entry will contain an instance id of
1 to represent the Ethernet port, and 2 to represent
the FDDI port. |
| INT efdmimBdgPortErrorPkts | 1.3.6.1.4.1.52.1.6.4.1.2.1.6 | INTEGER | read-only | The number of frame errors detected on this port. |
| INT efdmimBdgPortFilteredPkts | 1.3.6.1.4.1.52.1.6.4.1.2.1.3 | INTEGER | read-only | The number of frames filtered by the bridge at this
port. |
| INT efdmimBdgPortForwardedPkts | 1.3.6.1.4.1.52.1.6.4.1.2.1.4 | INTEGER | read-only | The number of frames forwarded by the bridge through
this port. |
| INT efdmimBdgPortReceivedPkts | 1.3.6.1.4.1.52.1.6.4.1.2.1.2 | INTEGER | read-only | The number of frames received by the bridge through
this port. |
| OCT efdmimBdgPortState | 1.3.6.1.4.1.52.1.6.4.1.2.1.1 | OCTET STRING | read-only | This object is returned only if spanning tree is
enabled on the bridge. It returns a text string
representing the current state of the port:
'Disabled', 'Listening', 'Learning',
'Forwarding', or 'Blocking'. |
| efdmimBdgPortTable | 1.3.6.1.4.1.52.1.6.4.1.2 | | not-accessible | This is a table of items that relate to bridge ports.
Note there are 2 bridge (packet communication) ports
on the EFDMIM, the ethernet port, and the FDDI
port. |
| INT efdmimBdgPortTransmittedPkts | 1.3.6.1.4.1.52.1.6.4.1.2.1.5 | INTEGER | read-only | The number of frames transmitted on this port. |
| INT efdmimBypassAttached | 1.3.6.1.4.1.52.1.6.4.1.35 | INTEGER | read-only | Does the station has an optical bypass switch? |
| INT efdmimBypassStuck | 1.3.6.1.4.1.52.1.6.4.1.39 | INTEGER | read-only | True if the optical bypass switch is stuck
False if everything is ok. |
| INT efdmimCfmState | 1.3.6.1.4.1.52.1.6.4.1.34 | INTEGER | read-only | The efdmim's current CFM state.
Legal values are:
isolated (0)
wrap-A (1)
wrap-B (2)
wrap-AB (3)
through-A (4)
through-B (5)
through-AB (6)
wrap-S (7) |
| OCT efdmimDeviceBdgName | 1.3.6.1.4.1.52.1.6.4.1.21 | OCTET STRING | read-write | This is a user-defined name for the bridge. The name
may contain up to 32 characters. |
| OCT efdmimDeviceBridgeAddr | 1.3.6.1.4.1.52.1.6.4.1.42 | OCTET STRING | read-only | This returns the Bridge address in canonical
format. |
| INT efdmimDeviceDisableBridge | 1.3.6.1.4.1.52.1.6.4.1.26 | INTEGER | read-write | States whether or not the bridge is disabled. To
disable the bridge, set this value to 1. To
enable the bridge, set this value to 0. |
| INT efdmimDeviceErrorPkts | 1.3.6.1.4.1.52.1.6.4.1.33 | INTEGER | read-only | The aggregate number of frame errors detected on it's
ports |
| INT efdmimDeviceFilteredPkts | 1.3.6.1.4.1.52.1.6.4.1.30 | INTEGER | read-only | The aggregate number of frames received and filtered
by the bridge through it's ports. |
| INT efdmimDeviceForwardedPkts | 1.3.6.1.4.1.52.1.6.4.1.31 | INTEGER | read-only | The aggregate number of frames received and forwarded
by the bridge through it's ports. |
| OCT efdmimDeviceLocation | 1.3.6.1.4.1.52.1.6.4.1.24 | OCTET STRING | read-write | A user defined name used to represent the location of
the bridge. |
| INT efdmimDeviceReceivedPkts | 1.3.6.1.4.1.52.1.6.4.1.29 | INTEGER | read-only | The aggregate number of frames received by the
bridge through it's ports. |
| INT efdmimDeviceResetCounters | 1.3.6.1.4.1.52.1.6.4.1.27 | INTEGER | write-only | This forces the EFDMIM to reset it's counters.
Note: The efdmim will reset all it's counters
except for the following:
FDDI Frame count
FDDI Error count
FDDI Lost count
FDDI Ring Oscillations. |
| OCT efdmimDeviceStatus | 1.3.6.1.4.1.52.1.6.4.1.20 | OCTET STRING | read-only | This is an Ascii string representation of the
station's status. Responses include 'ON-LINE',
'STAND BY', and 'DISABLED'. |
| INT efdmimDeviceSwitchSettings | 1.3.6.1.4.1.52.1.6.4.1.28 | INTEGER | read-only | This describes the dip and jumper settings
physically set on the efdmim board.
Switch multiply 2**n
Root 0
Forward Broadcasts 1
Spanning Tree 2
BPDU Type 3
Bypass 4
Ring Select 5
Diagnostics 6
Mode 7
Root: If 0, then spanning tree root is
selected. If 1, then spanning
tree root is NOT selected.
Forward Broadcasts: If 0, then all broadcast packets
are forwarded. If 1, then all
broadcasts packets are filtered.
Spanning Tree: If 0, then spanning tree
facilities are enabled. If 1,
then spanning tree facilities
are disabled.
BPDU Type: If 0, then spanning tree uses
the IEE bridge packet protocol.
If 1, then spanning tree uses
the DEC bridge packet protocol.
Bypass: If 0, then there is an optical
bypass physically attached to
the bridge. If 1, then there is
not an optical bypass attached
to the bridge.
Ring Select: If 0, the bridge should attach
to the primary FDDI ring
(Through-A mode). If 1, the
bridge should attach to the
secondary FDDI ring (Through-B
mode).
Diagnostics: If 0, the bridge is in it's
normal mode of operation. If 1,
then the bridge is running self
diagnostics.
Mode: If 0, the bridge is an
encapsulating bridge (talks from
ethernet to ethernet using FDDI
only as a backbone). If 1, the
bridge is a translation bridge (
talks ethernet to ethernet, and
ethernet to FDDI). |
| INT efdmimDeviceTransmittedPkts | 1.3.6.1.4.1.52.1.6.4.1.32 | INTEGER | read-only | The aggregate number of frames transmitted on it's
ports. |
| OCT efdmimDeviceType | 1.3.6.1.4.1.52.1.6.4.1.22 | OCTET STRING | read-only | This represents the type of bridge this is. The
EFDMIM will always respond with 'EFDMIM'. |
| CTR efdmimDeviceUptime | 1.3.6.1.4.1.52.1.6.4.1.25 | Counter | read-only | The number of seconds that have elapsed since the
bridge reset or initialized. |
| OCT efdmimDeviceVersion | 1.3.6.1.4.1.52.1.6.4.1.23 | OCTET STRING | read-only | A text string representing the firmware version
installed in the bridge. |
| OCT efdmimDownstreamMac | 1.3.6.1.4.1.52.1.6.4.1.38 | OCTET STRING | read-only | The address of this station's downstream MAC in
canonical format. |
| INT efdmimMode | 1.3.6.1.4.1.52.1.6.4.1.40 | INTEGER | read-only | Encapsulation bridges talk using the FDDI ring as a
back-bone only. Translation bridges translates the
packets into FDDI format. |
| CTR efdmimOscillations | 1.3.6.1.4.1.52.1.6.4.1.36 | Counter | read-only | The number of times the claim/beacon
process has completed since power-up.
Note: This does not get reset when a reset counter
command is issued. |
| efdmimPhyEntry | 1.3.6.1.4.1.52.1.6.4.1.3.1 | | not-accessible | This is a specific entry in the efdmimPhyTable that
represents a specific attribute of a phy. Note that
phy entries that refer to PHY-A will use an instance
identifier of 1 and phy entries that refer to PHY-B
will use an instance identifier of 2. |
| efdmimPhyTable | 1.3.6.1.4.1.52.1.6.4.1.3 | | not-accessible | This is a table of data that pertains only to phys on
the efdmim. |
| INT efdmimPhyWithold | 1.3.6.1.4.1.52.1.6.4.1.3.1.1 | INTEGER | read-only | Describes if the phy is enabled but not allowed to be
used due to a topology problem.
Legal values are:
none (0) - PHY can be used
withold-because-M-M (1) - Don't use PHY
withold-because-Other (2) - Don't use PHY |
| INT efdmimRingDuplicate | 1.3.6.1.4.1.52.1.6.4.1.1.1.7 | INTEGER | read-only | A bit-mapped representation of duplicate
address information.
if this state: Add 2**n where n=
My Duplicate: 0
UNA Duplicate: 1
My Duplicate: This node has determined that it's
MAC address is the same as the MAC address for
another node on the ring. UNA Duplicate: The
upstream neighbor of this node has determined that
it's MAC address is the same as the MAC address for
another node on the ring. |
| efdmimRingEntry | 1.3.6.1.4.1.52.1.6.4.1.1.1 | | not-accessible | An fddi ring entry containing information common
to all stations in a token path. All FDDI ring
Entry elements have an instance id made up of an
index followed by a canonical FDDI station
address. The indexes are ordered sequentially 1
to n, and the corresponding FDDI addresses are
ordered in reverse token flow. Consider the
following example:
--->---[1] 00-00-1D-00-00-04
| | (arrows show token flow)
| V
| [3] 00-00-1D-00-00-01
| |
| V
| [2] 00-00-1D-00-00-03
| |
----<----------/
A get_next request with instance id = 0
will return 1.0.0.1D.0.0.4
A get_next request with
instance id= 1.0.0.1D.0.0.4
will return 2.0.0.1D.0.0.3
A get_next request with
instance id= 2.0.0.1D.0.0.1
will return 3.0.0.1D.0.0.1 |
| OCT efdmimRingMacAddress | 1.3.6.1.4.1.52.1.6.4.1.1.1.8 | OCTET STRING | read-only | A canonical representation of the MAC address. |
| CTR efdmimRingMacs | 1.3.6.1.4.1.52.1.6.4.1.1.1.3 | Counter | read-only | The number of MACs on this FDDI node. |
| INT efdmimRingMasterPhys | 1.3.6.1.4.1.52.1.6.4.1.1.1.5 | INTEGER | read-only | The number of master ports on this node.
Results will range from 0 to 255. |
| INT efdmimRingNodeClass | 1.3.6.1.4.1.52.1.6.4.1.1.1.2 | INTEGER | read-only | Reports if the node is a station or
a concentrator.
Legal values are:
station (0)
concentrator (1) |
| INT efdmimRingNonMasterPhys | 1.3.6.1.4.1.52.1.6.4.1.1.1.4 | INTEGER | read-only | The sum of the all A-Ports,
B-Ports, and S-Ports on this node. |
| efdmimRingTable | 1.3.6.1.4.1.52.1.6.4.1.1 | | not-accessible | An ordered list of fddi nodes found on the
Fddi Ring. |
| INT efdmimRingTopology | 1.3.6.1.4.1.52.1.6.4.1.1.1.6 | INTEGER | read-only | A bit-mapped representation of the current state of
the node.
if this state: Add 2**n where n=
Wrapped Node: 0
Unattached Concentrator: 1
A-A twisted ring: 2
B-B twisted ring: 3
Rooted Station: 4
SRF supported 5
Wrapped Node: set when the node's cf-state is
Wrap-A, Wrap-B, Wrap-S, or Wrap-
AB.
Unattached Concentrator:
set when a concentrator
has no active A, B, or S ports.
A-A Twisted ring: A twisted ring has occurred
because this node's A port has
been connected to another port.
B-B Twisted ring: A twisted ring has occurred
because this node's B port has
been connected to another B
port.
Rooted Station: This is a station who's A, B
and S ports are NOT active in
tree mode. If any A, B, or S
ports are active in TREE mode,
this is FALSE.
SRF supported: This node adheres to the status
reporting frame protocol. |
| OCT efdmimRingUpstreamMac | 1.3.6.1.4.1.52.1.6.4.1.1.1.1 | OCTET STRING | read-only | This is the 6 octet canonical representation of
the upstream neighbor's address. The upstream
neighbor is the last MAC to receive the token
before this MAC.
Please Note: SMT Rev 6.2 and under
specify the unknown address as 00-00-00-00-00-00. SMT
revisions after 6.2 specify the unknown address as
00-00-F8-00-00-00. |
| CTR efdmimRingUpTime | 1.3.6.1.4.1.52.1.6.4.1.37 | Counter | read-only | The elapsed time in seconds since the most recent
ring oscillation. Note: This returns 0 whenever the
FDDI ring is down. |
| INT efdmimRmtState | 1.3.6.1.4.1.52.1.6.4.1.41 | INTEGER | read-only | This represents what state the RMT state machine is
in. Legal values are:
isolated (0)
non-Op (1)
ring-Op (2)
detect (3)
non-Op-Dup (4)
ring-Op-Dup (5)
directed (6)
trace (7) |
| nb55 | 1.3.6.1.4.1.52.1.6.4 | | | |
| rev1 | 1.3.6.1.4.1.52.1.6.4.1 | | | |
| subsystem | 1.3.6.1.4.1.52.1.6 | | | |
