EFDATA-SPECTRACAST-DR5000-MIB

All MIBs › EFDATA-SPECTRACAST-DR5000-MIB

Category: Domain: Satellite, Vendor: EF Data

Description: EF Data SpectraCast DR5000 MIB for managing the DR5000 satellite receiver demodulator including signal and data rate parameters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is EFDATA-SPECTRACAST-DR5000-MIB?

EFDATA-SPECTRACAST-DR5000-MIB is a vendor MIB from EF Data (SpectraCast product line) for managing the DR5000 satellite receiver/demodulator, a device used in satellite communications ground stations. Based on its stated purpose, it would expose configuration and status data for the receiver's signal reception, demodulation, and data rate parameters, though no specific objects or module description text were captured for this module in the available source. Given the DR5000 is a demodulator, such a MIB would typically support monitoring signal-related hardware status such as signal lock, carrier-to-noise ratio, or symbol/data rate, though this cannot be confirmed from the data at hand. It likely depends on EF Data's broader enterprise MIB conventions shared across its satellite modem/demodulator product line. It is typically deployed in satellite ground station/teleport environments where DR5000 demodulators are monitored for RF and data signal health. Network engineers evaluating or troubleshooting this functionality can download the EFDATA-SPECTRACAST-DR5000-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in EFDATA-SPECTRACAST-DR5000-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

EF Data / SpectraCast DR5000 satellite receiver/demodulator

Monitoring Examples

No sample objects or module description text were available for this module, so specific object or table names cannot be grounded; based on the product being a satellite demodulator, it likely exposes objects for signal lock status, carrier-to-noise ratio, and data rate, but this cannot be confirmed from the provided data.

Imported Objects

From RFC1155-SMI

Counter

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

IpAddress
OBJECT-TYPE
enterprises

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR agc	1.3.6.1.4.1.6247.3.2.6.6	DisplayString	read-only	Gain value set by AGC (Db) (read only).
agcLevel	1.3.6.1.4.1.6247.3.2.9.4.7
OCT agcThreshold	1.3.6.1.4.1.6247.3.2.9.4.7.2	OCTET STRING	read-write	AGC threshold value (read-write)
INT agcTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.7.1	INTEGER	read-write	Use AGC level trap. A trap message is sent when gain value is greater then AGC trap threshold (read-write).
INT authentication	1.3.6.1.4.1.6247.3.2.5.9	INTEGER	read-write	Authentication mode, may take values: PAP or CHAP (read-write).
STR badPackets	1.3.6.1.4.1.6247.3.2.7.5	DisplayString	read-only	Bad RS packets (read only).
STR ber_before_Err_Correction	1.3.6.1.4.1.6247.3.2.6.4	DisplayString	read-only	BER before error correction (read only).
berLevel	1.3.6.1.4.1.6247.3.2.9.4.5
OCT berThreshold	1.3.6.1.4.1.6247.3.2.9.4.5.2	OCTET STRING	read-write	BER level threshold value (read-write).
INT berTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.5.1	INTEGER	read-write	Use BER level trap. A trap message is sent when BER value is greater then BER trap threshold (read-write).
INT ccu_connection_status	1.3.6.1.4.1.6247.3.2.6.9	INTEGER	read-only	CCU connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2), Waiting for Dialup(3), or Waiting for RF Lock(4) (read only).
INT ccuconnect	1.3.6.1.4.1.6247.3.2.8.4	INTEGER	read-write	Set to True in order to connect to the CCU.
ccuConnection	1.3.6.1.4.1.6247.3.2.9.4.3
INT ccuConnectionMode	1.3.6.1.4.1.6247.3.2.4.1	INTEGER	read-write	CCU connection mode, may take values: Manual(0), Duplex(1) or Simplex(2) (read-write).
INT ccudisconnect	1.3.6.1.4.1.6247.3.2.8.5	INTEGER	read-write	Set to True in order to disconnect from the CCU.
IP ccuIpAddress	1.3.6.1.4.1.6247.3.2.4.2	IpAddress	read-write	CCU IP Address (read-write).
ccuparameters	1.3.6.1.4.1.6247.3.2.4
STR ccuPassword	1.3.6.1.4.1.6247.3.2.4.4	DisplayString	write-only	Password for connecting to the CCU (write only).
INT ccuTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.3.1	INTEGER	read-write	Use CCU connection status trap. A trap message is sent when CCU status changes from Connected to any other one (read-write).
STR ccuUserName	1.3.6.1.4.1.6247.3.2.4.3	DisplayString	write-only	User name for connecting to the CCU (write only).
INT connectionMode	1.3.6.1.4.1.6247.3.2.5.1	INTEGER	read-write	Connection Mode, may take values: Manual(0) or Automatic(1) (read-write).
STR correctedPackets	1.3.6.1.4.1.6247.3.2.7.6	DisplayString	read-only	Corrected RS packets (read only).
demodulator	1.3.6.1.4.1.6247.3.2.9.4.2
STR demodulatorStatus	1.3.6.1.4.1.6247.3.2.6.2	DisplayString	read-only	Current demodulator status (read only).
INT demodulatorTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.2.1	INTEGER	read-write	Use demodulator status trap. A trap message is sent when the demodulator loses data lock (read-write).
INT dialTone	1.3.6.1.4.1.6247.3.2.5.5	INTEGER	read-write	Dialing mode, may take values: Tone(0)) or Pulse(1) (read-write).
dialup	1.3.6.1.4.1.6247.3.2.9.4.4
INT dialup_connection_status	1.3.6.1.4.1.6247.3.2.6.10	INTEGER	read-only	Dialup connection status, may take values Disconnected(0), Connected(1), Trying to Connect(2) or Idle(10) (read only).
INT dialupConnect	1.3.6.1.4.1.6247.3.2.8.2	INTEGER	read-write	Set to True in order to dial your ISP.
INT dialupDisconnect	1.3.6.1.4.1.6247.3.2.8.3	INTEGER	read-write	Set to true in order to disconnect from your ISP.
dialupparameters	1.3.6.1.4.1.6247.3.2.5
INT dialupTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.4.1	INTEGER	read-write	Use dialup connection status trap. A trap message is sent when dialup status changes from Connected to any other one except Idle (read-write).
dr5000	1.3.6.1.4.1.6247.3.2
INT driverRestart	1.3.6.1.4.1.6247.3.2.8.1	INTEGER	read-write	Set to True in order to restart the Driver.
dvbparameters	1.3.6.1.4.1.6247.3.2.3
STR eb_N0	1.3.6.1.4.1.6247.3.2.6.8	DisplayString	read-only	Eb/N0 (read only).
efdata	1.3.6.1.4.1.6247
INT enableTraps	1.3.6.1.4.1.6247.3.2.9.1	INTEGER	read-write	Set to True in order to start getting traps.
INT encryptedMulticast	1.3.6.1.4.1.6247.3.2.4.5	INTEGER	read-write	Set to Enabled in order to receive encrypted multicast.
STR fec	1.3.6.1.4.1.6247.3.2.6.5	DisplayString	read-only	FEC (read only).
flowStatistics	1.3.6.1.4.1.6247.3.2.7
freqOffset	1.3.6.1.4.1.6247.3.2.9.4.6
OCT freqOffsetThreshold	1.3.6.1.4.1.6247.3.2.9.4.6.2	OCTET STRING	read-write	Frequency offset threshold value (read-write).
INT freqOffsetTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.6.1	INTEGER	read-write	Use frequency offset trap. A trap message is sent when absolute frequency offset is greater then frequency offset trap threshold (read-write).
STR frequencyOffset	1.3.6.1.4.1.6247.3.2.6.7	DisplayString	read-only	Frequency offset (read only).
INT frequencyRange	1.3.6.1.4.1.6247.3.2.2.5	INTEGER	read-write	Frequency range may take values: Low(0) or High(1) (read-write).
general	1.3.6.1.4.1.6247.3.2.1
STR hardwareVersion	1.3.6.1.4.1.6247.3.2.1.2	DisplayString	read-only	Hardware Version (read only).
INT idleTimeOut	1.3.6.1.4.1.6247.3.2.5.8	INTEGER	read-write	Dial on demand time out in minutes. Set to 0 in order to disable dial on demand (read-write).
STR initializationStatus	1.3.6.1.4.1.6247.3.2.6.1	DisplayString	read-only	Card initialization status (read only).
STR lnb_Frequency	1.3.6.1.4.1.6247.3.2.2.2	DisplayString	read-write	LNB frequency (GHz) (read-write).
STR macAddress	1.3.6.1.4.1.6247.3.2.1.3	DisplayString	read-only	MAC address (read only).
maintenance	1.3.6.1.4.1.6247.3.2.8
multicastDaemon	1.3.6.1.4.1.6247.3.2.9.4.1
STR multicastRoutingStatus	1.3.6.1.4.1.6247.3.2.1.4	DisplayString	read-only	Multicast routing status (read only).
STR multicastThroughput	1.3.6.1.4.1.6247.3.2.7.3	DisplayString	read-only	Multicast throughput in bytes/sec. (read only).
INT multicastTrapEnable	1.3.6.1.4.1.6247.3.2.9.4.1.1	INTEGER	read-write	Use multicast daemon status trap. A trap message is sent when multicast daemon goes down (read-write).
STR password	1.3.6.1.4.1.6247.3.2.5.4	DisplayString	write-only	Password for dialup connection (write only).
INT phoneNumber	1.3.6.1.4.1.6247.3.2.5.2	INTEGER	read-write	ISP Phone number, accepts only digits (read-write).
pidEntry	1.3.6.1.4.1.6247.3.2.3.2.1		not-accessible	PID entry containing objects for the particular PID.
INT pidindex	1.3.6.1.4.1.6247.3.2.3.2.1.1	INTEGER	read-only	Unique ID for each PID, ranges between 1 and PIDs-number (read-only).
INT pids_number	1.3.6.1.4.1.6247.3.2.3.1	INTEGER	read-only	Number of PIDs in the list (read only).
pidTable	1.3.6.1.4.1.6247.3.2.3.2		not-accessible	List of PID entries. The number of entries is given by PIDs-number value.
INT pidvalue	1.3.6.1.4.1.6247.3.2.3.2.1.2	INTEGER	read-write	Unique PID value (read-write).
INT polarity	1.3.6.1.4.1.6247.3.2.2.4	INTEGER	read-write	Polarity may take values: Disabled(0), Vertical(14) or Horizontal(18) (read-write).
INT resetFlowStatistics	1.3.6.1.4.1.6247.3.2.7.7	INTEGER	read-write	Set to True in order to reset flow statistics.
STR rf_Input	1.3.6.1.4.1.6247.3.2.2.1	DisplayString	read-write	RF Input frequency (MHz) (read-write).
rfparameters	1.3.6.1.4.1.6247.3.2.2
IP snmpManagerIP	1.3.6.1.4.1.6247.3.2.9.2	IpAddress	read-write	IP address of SNMP manager where traps have to be sent to (read-write).
snmpVariables	1.3.6.1.4.1.6247.3.2.9
STR softwareVersion	1.3.6.1.4.1.6247.3.2.1.1	DisplayString	read-only	Software Version (read only).
spectracast	1.3.6.1.4.1.6247.3
STR spectralInversion	1.3.6.1.4.1.6247.3.2.6.3	DisplayString	read-only	Spectral inversion (read only).
INT speed	1.3.6.1.4.1.6247.3.2.5.7	INTEGER	read-write	Modem connection speed, may take values: 9600, 19200, 38400, 57600 or 115200 (read-write).
status	1.3.6.1.4.1.6247.3.2.6
STR symbolRate	1.3.6.1.4.1.6247.3.2.2.3	DisplayString	read-write	Symbol rate (Msps) (read-write).
STR totalPackets	1.3.6.1.4.1.6247.3.2.7.4	DisplayString	read-only	Total packets received since reset (read only).
STR totalThroughput	1.3.6.1.4.1.6247.3.2.7.1	DisplayString	read-only	Total throughput in bytes/sec. (read only).
trapList	1.3.6.1.4.1.6247.3.2.9.4
INT trapPeriod	1.3.6.1.4.1.6247.3.2.9.3	INTEGER	read-write	Trap sending period in seconds (read-write).
STR unicastThroughput	1.3.6.1.4.1.6247.3.2.7.2	DisplayString	read-only	Unicast throughput in bytes/sec. (read only).
STR upgrade	1.3.6.1.4.1.6247.3.2.8.6	DisplayString	write-only	Set to the upgrade file name, and upgrade the system. After upgrade finishes the system reboots automatically (write only).
STR userName	1.3.6.1.4.1.6247.3.2.5.3	DisplayString	write-only	User name for dialup connection (write only).

RFC description

Manages Efdata Spectracast DR5000 satellite receiver, covering RF parameters, multicast routing, and hardware/software configuration.

Start monitoring EF Data/SpectraCast DR5000 satellite receiver/demodulator with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download EFDATA-SPECTRACAST-DR5000-MIB

What Is EFDATA-SPECTRACAST-DR5000-MIB?

Supported Devices

Monitoring Examples

This MIB depends on

Related MIBs

RFC description