| OID symbolic | OID numeric | Type | Access | Description |
|---|
| mcData | 1.3.6.1.4.1.289 | | | |
| NTF ed5000PortScn | 1.3.6.1.4.1.289.0.1 | | | An ed5000PortScn(1) is generated whenever a Fc_Port changes its operational state. For instance, the Fc_Port goes from on-line to offline. |
| NTF ed5000FruScn | 1.3.6.1.4.1.289.0.2 | | | An ed5000FruScn(2) is generated whenever a FRU status changes its operational state. |
| commDev | 1.3.6.1.4.1.289.2 | | | |
| fibreChannel | 1.3.6.1.4.1.289.2.1 | | | |
| fcSwitch | 1.3.6.1.4.1.289.2.1.1 | | | |
| ed_5000 | 1.3.6.1.4.1.289.2.1.1.1 | | | |
| ed5000Sys | 1.3.6.1.4.1.289.2.1.1.1.1 | | | |
| STR ed5000SysCurrentDate | 1.3.6.1.4.1.289.2.1.1.1.1.1 | DisplayString | read-only | The current date information. |
| STR ed5000SysBootDate | 1.3.6.1.4.1.289.2.1.1.1.1.2 | DisplayString | read-only | The date and time of the last IPL |
| STR ed5000SysFirmwareVersion | 1.3.6.1.4.1.289.2.1.1.1.1.3 | DisplayString | read-only | The current version of the firmware. |
| STR ed5000SysTypeNum | 1.3.6.1.4.1.289.2.1.1.1.1.4 | DisplayString | read-only | This object identifies ASCII type
number for the unit. |
| STR ed5000SysModelNum | 1.3.6.1.4.1.289.2.1.1.1.1.5 | DisplayString | read-only | This object identifies ASCII
model number for the unit. |
| STR ed5000SysMfg | 1.3.6.1.4.1.289.2.1.1.1.1.6 | DisplayString | read-only | This object identifies ASCII
manufacturer for the unit. |
| STR ed5000SysPlantOfMfg | 1.3.6.1.4.1.289.2.1.1.1.1.7 | DisplayString | read-only | This object identifies ASCII plant
of manufacturer for the unit. |
| STR ed5000SysSeqNum | 1.3.6.1.4.1.289.2.1.1.1.1.8 | DisplayString | read-only | This object identifies ASCII
sequence number for the unit. |
| STR ed5000SysEcLevel | 1.3.6.1.4.1.289.2.1.1.1.1.9 | DisplayString | read-only | This object identifies ASCII EC level
ID for the unit. |
| STR ed5000SysOemSerialNum | 1.3.6.1.4.1.289.2.1.1.1.1.10 | DisplayString | read-only | This object identifies ASCII OEM
serial number for the unit |
| ED5 ed5000SysOperStatus | 1.3.6.1.4.1.289.2.1.1.1.1.11 | Ed5000SysOperStatus | read-only | The current operational status
of the switch. The values are defined as follow:
operational (1), redundant-failure (2), minor-failure (3),
major-failure (4), not-operational (5). |
| ED5 ed5000SysState | 1.3.6.1.4.1.289.2.1.1.1.1.12 | Ed5000SysState | read-only | If the edOperStatus of the switch is
operational, the switch will be in one of the four states:
online(1), coming-online(2), offline(3), and going-offline(4). |
| INT ed5000SysAdmStatus | 1.3.6.1.4.1.289.2.1.1.1.1.13 | INTEGER | read-write | The desired administrative status
of the switch. A management station may place the switch
in a desired state by setting this object accordingly.
The desired administrative status are online(1) and offline(2).
The online means setting the switch to be accessible by
an external Fibre Channel port, and offline means setting
the switch to be inaccessible. |
| ed5000Fru | 1.3.6.1.4.1.289.2.1.1.1.2 | | | |
| ed5000FruTable | 1.3.6.1.4.1.289.2.1.1.1.2.1 | | not-accessible | A table that contains one entry for each module. |
| ed5000FruEntry | 1.3.6.1.4.1.289.2.1.1.1.2.1.1 | | not-accessible | An entry containing the service parameters of the module. |
| ED5 ed5000FruCode | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.1 | Ed5000FruCode | read-only | Field Replaceable Unit.
A hardware component of the product that is replaceable
as an entire unit. Each module defined in this MIB has
a fixed FRU code. The values are defined as follow:
fru-none (0) , fru-bkplane (1), fru-ctp (2), fru-mpc (3),
fru-cmm (4), fru-fan (5), fru-power (6), fru-panel (7),
fru-gsm (8), fru-gls (9), fru-glx (10), fru-lsm (11), fru-gxx (12). |
| ED5 ed5000FruPosition | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.2 | Ed5000FruPosition | read-only | This object identifies the position
of the module. Port cards start from 1 to 8.
All other cards start from 1 to 1 or 2. |
| ED5 ed5000FruStatus | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.3 | Ed5000FruStatus | read-only | This object identifies the operational
status of the module. The active(1)
state indicates that the current module is active.
The backup(2) state indicates that the back up module is used.
update-busy (3) state indicates that the module is
in the updating process. The failed(4) state indicates
that the current module is failed. |
| STR ed5000FruPartNumber | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.4 | DisplayString | read-only | This object identifies the part number of the module. |
| STR ed5000FruSerialNumber | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.5 | DisplayString | read-only | This object identifies the serial number of the module. |
| CTR ed5000FruPowerOnHours | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.6 | Counter | read-only | This object indicates the number of the hours that the
FRU has been in operation. |
| STR ed5000FruTestDate | 1.3.6.1.4.1.289.2.1.1.1.2.1.1.7 | DisplayString | read-only | This object indicates final test date of the module. |
| ed5000Port | 1.3.6.1.4.1.289.2.1.1.1.3 | | | |
| ed5000PortTable | 1.3.6.1.4.1.289.2.1.1.1.3.1 | | not-accessible | A table that contains one entry
for each switch port (stitch only). |
| ed5000PortEntry | 1.3.6.1.4.1.289.2.1.1.1.3.1.1 | | not-accessible | An entry containing the information of the switch port. |
| ED5 ed5000PortIndex | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.1 | Ed5000PortIndex | read-only | This object identifies the switch port. |
| ED5 ed5000PortPhyState | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.2 | Ed5000PortPhyState | read-only | This object identifies the physical state of the port. |
| ED5 ed5000PortOpStatus | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.3 | Ed5000PortStatus | read-only | This object identifies the operational
status of the port. The online state indicates that user frames
can be passed. |
| ED5 ed5000PortAdmStatus | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.4 | Ed5000PortAdmStatus | read-write | The desired state of the port.
A management station may place the port in a desired
state by setting this object accordingly. The testing(3)
state indicates that no user frames can be passed.
As the result of either explicit management action
or per configuration information accessible by the switch,
ed5000PortAdmStatus is then changed to either the online(1)
or testing(3) states, or remains in the offline state. |
| CTR ed5000PortTxWords | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.11 | Counter | read-only | This object counts the number of
Fibre Channel words that the port has transmitted. |
| CTR ed5000PortRxWords | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.12 | Counter | read-only | This object counts the number of
Fibre Channel words that the port has received. |
| CTR ed5000PortTxFrames | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.13 | Counter | read-only | This object counts the number of
(Fibre Channel) frames that the port has transmitted. |
| CTR ed5000PortRxFrames | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.14 | Counter | read-only | This object counts the number of
(Fibre Channel) frames that the port has received. |
| CTR ed5000PortRxC2Frames | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.15 | Counter | read-only | This object counts the number of
Class 2 frames that the port has received. |
| CTR ed5000PortRxC3Frames | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.16 | Counter | read-only | This object counts the number of
Class 3 frames that the port has received. |
| CTR ed5000PortRxLCs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.17 | Counter | read-only | This object counts the number of
Link Control frames that the port has received. |
| CTR ed5000PortRxMcasts | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.18 | Counter | read-only | This object counts the number of
Multicast frames that the port has received. |
| CTR ed5000PortTooManyRdys | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.19 | Counter | read-only | This object counts the number of
2.26 micro second intervals where the transmission of RDYs has
priority over the transmission of frame traffic.
(In 2.x releases and below, this counter gets incremented continuously
and therefore has no meaning. In release 3.0 and above, it is always 0.) |
| CTR ed5000PortNoTxCredits | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.20 | Counter | read-only | This object counts the amount of time
that frame transmission is blocked by a transmit credit of zero.
This is sampled once every 120 53.125 MHZ clocks,
and the counter is incremented by 1 if the condition is true. |
| CTR ed5000PortRxEncFrs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.21 | Counter | read-only | This object counts the number of
encoding error or disparity error inside or outside
frames received. |
| CTR ed5000PortRxCrcs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.22 | Counter | read-only | This object counts the number of
CRC errors detected for frames received. |
| CTR ed5000PortRxTruncs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.23 | Counter | read-only | This object counts the number of
truncated frames that the port has received. |
| CTR ed5000PortRxTooLongs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.24 | Counter | read-only | This object counts the number of
received frames that are too long. |
| CTR ed5000PortRxBadEofs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.25 | Counter | read-only | This object counts the number of
received frames that have bad EOF delimiter. |
| CTR ed5000PortRxBadOs | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.26 | Counter | read-only | This object counts the number of
invalid Ordered Sets received. |
| CTR ed5000PortC3Discards | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.27 | Counter | read-only | This object counts the number of
Class 3 frames that the port has discarded. |
| CTR ed5000PortMcastTimedOuts | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.28 | Counter | read-only | This object counts the number of
Multicast frames that has been timed out. |
| CTR ed5000PortTxMcasts | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.29 | Counter | read-only | This object counts the number of
Multicast frames that has been transmitted. |
| CTR ed5000PortTxThroughput | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.30 | Counter | read-only | This object presents the Bps transmission rate. |
| CTR ed5000PortRxThroughput | 1.3.6.1.4.1.289.2.1.1.1.3.1.1.31 | Counter | read-only | This object presents the Bps reception rate. |
