All MIBs › E1-OPT-MIB
Category: Domain: Optical Transport, Network Interfaces, Technology: Optical Transport
Description: MIB for E1 optical interface management providing monitoring and configuration of E1 line parameters over optical transport.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is E1-OPT-MIB?
E1-OPT-MIB is a Codex Corporation enterprise MIB (codex OBJECT IDENTIFIER ::= { enterprises 449 }, part of the cdx6500 product branch) for the Codex 6500-series multiplexer's channelized E1/T1 telco interfaces; despite its name, the module's actual content is telco E1/ISDN line configuration and performance monitoring rather than optical-transport management, so administrators expecting optical-layer objects should note this discrepancy. The configuration table (cdx6500PPCTE1PortTable) covers ISDN/channelized framing format, line framing type, line coding (HDB3/AMI), impedance, transmit-clock source, ISDN switch type/variant and user/network side, plus per-metric alarm thresholds (LES, LCV, PCV, CSS, ES, BES, SES, SEFS, UAS, DM). Statistics tables report port state and alarm state (cdx6500PPSTE1PortTable), rolling 15-minute/daily/24-hour performance history for the same error metrics, per-DS0-channel ABCD signaling state, and detailed ISDN call statistics/summary (call counts, rejection causes, call duration min/max/avg, B-channel status and direction). This gives an operator both the line-layer configuration and the historical/real-time error and call performance needed to diagnose degraded or failed E1/ISDN spans. It is deployed on Codex 6500-series T1/E1 access multiplexers, and administrators can download the E1-OPT-MIB file to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in E1-OPT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Codex 6500-series T1/E1 access multiplexers
Monitoring Examples
An operator polls cdx6500PPSTE1PortTable's cdx6500E1StatAlarmState for a port and, if it shows los(4) or lof(6), cross-references cdx6500E1StatCurrent15MinutesReportTable's SES/UAS gauges and cdx6500E1StatISDNStatusTable's cdx6500E1StatDchannelState; a down D-channel combined with rising unavailable-seconds counts would indicate a failed or misconfigured E1 span rather than a transient line hit.
What Can Be Monitored
- E1/ISDN line framing, coding, and clock configuration
- per-metric alarm thresholds (LES/LCV/PCV/CSS/ES/BES/SES/SEFS/UAS/DM)
- 15-minute/daily/24-hour performance history counters
- port and D-channel alarm/operational state
- ISDN call statistics and call-summary table
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| enterprises |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| codex | 1.3.6.1.4.1.449 | |||
| cdxProductSpecific | 1.3.6.1.4.1.449.2 | |||
| cdx6500 | 1.3.6.1.4.1.449.2.1 | |||
| cdx6500Configuration | 1.3.6.1.4.1.449.2.1.2 | |||
| cdx6500CfgProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1 | |||
| cdx6500PCTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.2.1.1 | |||
| cdx6500PCTT1E1PortTable | 1.3.6.1.4.1.449.2.1.2.1.1.24 | |||
| cdx6500PCTE1PortTable | 1.3.6.1.4.1.449.2.1.2.1.1.24.2 | |||
| cdx6500PPCTE1PortTable | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1 | not-accessible | This table contains the E1 (Physical) Port Configuration parameters. | |
| cdx6500PPCTE1PortEntry | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1 | not-accessible | A E1 Port Configuration Table Entry. Each entry contains the configuration parameters for a single E1 port. | |
| PHY cdx6500E1CfgPortNumber | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.1 | PhysicalPortNumber | read-only | Port number of the (physical) E1 port. |
| INT cdx6500E1CfgPortType | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.2 | INTEGER | read-only | This is a digital port having interface type E1. e1 :This is an E1 port. |
| INT cdx6500E1CfgFormat | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.3 | INTEGER | read-only | Specifies the format of the E1 interface. channelize : DS0 definition fixed, predefined by the telco or the user. isdn : DS0 definition defined by the ISDN D channel. nc : Skipped during configuration. |
| INT cdx6500E1CfgLineFramingType | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.4 | INTEGER | read-only | Indicates the type of framing used by the DS1 circuit - e1CcsFebe : Common Channel Signaling with CRC & Si = FEBE. e1CcsCrc : Common Channel Signaling with CRC & Si = 1. e1Ccs : Common Channel Signaling with no CRC & Si = 1. e1CasFebe : Channel Associated Signalling with Si = FEBE. e1CasCrc : Channel Associated Signalling with CRC. e1Cas : Channel Associated Signalling. nc : Skipped during configuration. |
| INT cdx6500E1CfgLineCoding | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.5 | INTEGER | read-only | Selects the type of suppression used on the E1 link. hdb3 : High Density Bipolar 3. ami : Alternate Mark Inversion. nc : Skipped during configuration. |
| INT cdx6500E1CfgLineImpedence | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.6 | INTEGER | read-only | This parameter indicates the line impedence. li120 :The line impedence is 120 ohms. li75 :The line impedence is 75 ohms. nc : Skipped during configuration. |
| INT cdx6500E1CfgTransmitClock | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.7 | INTEGER | read-only | This parameter selects the source of the transmit clock. node : Node Timing (timing off another interface). rec : Received Timing. int : Internal Oscillator. nc : Skipped during configuration. |
| INT cdx6500E1CfgThresholdValueLES | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.8 | INTEGER | read-only | Threshold value of Line Errored Seconds (LESs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueLCV | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.9 | INTEGER | read-only | Threshold value of Line Code Violations (LCVs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValuePCV | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.10 | INTEGER | read-only | Threshold value of Path Code Violations (PCVs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueCSS | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.11 | INTEGER | read-only | Threshold value of Controlled Slip Seconds (CSSs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueES | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.12 | INTEGER | read-only | Threshold value of Errored Seconds (ESs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueBES | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.13 | INTEGER | read-only | Threshold value of Bursty Errored Seconds (BESs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueSES | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.14 | INTEGER | read-only | Threshold value of Severely Errored Seconds (SESs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueSEFS | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.15 | INTEGER | read-only | Threshold value of Severely Errored Framing Seconds (SEFSs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueUAS | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.16 | INTEGER | read-only | Threshold value of Unavailable Seconds (UASs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgThresholdValueDM | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.17 | INTEGER | read-only | Threshold value of Degraded Minutes (DMs) to report alarms on CTP when exceeded. |
| INT cdx6500E1CfgSwitchType | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.18 | INTEGER | read-only | The ISDN switch type. This specifies the type of equipment to which this span is connected. The possible choices are: att4ess : AT&T 4ESS Switch att5ess : AT&T 5ESS Switch ntDms100 : Northern Telecom DMS-100 Switch ntDms250 : Northern Telecom DMS-250 Switch md110Us : Ericsson MD-110 (North America) md110 : Ericsson MD-110 (International) siemens : Siemens EWSD Switch (U.S.) ntt : Nippon Telephone and Telegraph switch (Japan) general : Any Switch Type that conforms to CCITT standards nc : Skipped during configuration |
| INT cdx6500E1CfgVariant | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.19 | INTEGER | read-only | Select the ISDN Switch variant. This parameter depends upon the switch type configured. att : AT&T Custom nt : Northern Telecom isdn2 : Bellcore National ISDN-2 jate : JATE-compatible (Japan) net5 : NET-5 standard (Europe) oneTr6 : 1TR6 standard for PRI (Germany) vn3 : VN3 standard (France) ccitt : General CCITT Q.931 conformance ts014 : AUSTEL TS014 standard (Australia) nc : Skipped during configuration |
| INT cdx6500E1CfgUserNetworkSide | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.20 | INTEGER | read-only | This parameter specifies whether the T1/E1 port is emulating the network or user side of the ISDN network. user : The T1 or E1 port is emulating the user, ex. the T1 or E1 port is to be connected to an ISDN network. network : The T1 or E1 port is emulating the network, ex. the T1 or E1 port is to be connected to an ISDN PBX. nc : Skipped during configuration |
| INT cdx6500E1CfgCallingIdMsbState | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.21 | INTEGER | read-only | For DMS100/250 switches, this parameter defines if the MSB is set or clear in the Calling ID IE. disabled : The MSB in the calling ID IE is cleared. enabled : The MSB in the calling ID IE is set. nc : Skipped during configuration |
| INT cdx6500E1BchannelNumbering | 1.3.6.1.4.1.449.2.1.2.1.1.24.2.1.1.22 | INTEGER | read-only | This parameter specifies the B-Channel numbering scheme used by the ISDN service provider. oneTo31 : B-Channels are numbered 1 to 31. B-Channel 16 is an invalid number in this scheme. oneTo30 : B-Channels are numbered 1 to 30. B-Channel 31 isan invalid number in this scheme. nc : Skipped during configuration. |
| cdx6500Statistics | 1.3.6.1.4.1.449.2.1.3 | |||
| cdx6500StatProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1 | |||
| cdx6500PSTPortProtocolGroup | 1.3.6.1.4.1.449.2.1.3.1.1 | |||
| cdx6500PSTT1E1PortTable | 1.3.6.1.4.1.449.2.1.3.1.1.25 | |||
| cdx6500PPSTE1PortTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.2 | not-accessible | This table holds statistics information for E1 ports. | |
| cdx6500PPSTE1PortEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1 | not-accessible | Each entry contains statistics information for one E1 port. | |
| PHY cdx6500E1StatPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.1 | PhysicalPortNumber | read-only | Port number of the (physical) E1 port. |
| STR cdx6500E1StatTimeSinceLastResetType | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.2 | DisplayString | read-only | Time since last reset has happened for the port. |
| INT cdx6500E1StatPortType | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.3 | INTEGER | read-only | The configured value of the Port Type. e1 : This is a digital port with interface type E1. |
| INT cdx6500E1StatInterfaceType | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.4 | INTEGER | read-only | This parameter indicates the interface type of this port. it120 : Interface type is 120 ohms. it75 : Interface type is 75 ohms. na : Value not available. |
| INT cdx6500E1StatPortState | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.5 | INTEGER | read-only | The current port state : disabled : The port has been disabled. enabled : The port has been enabled. na : Value not available. |
| INT cdx6500E1StatAlarmState | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.6 | INTEGER | read-only | The alarm state of the port : none : No alarm (normal). rai : Remote Alarm Indication. ais : Alarm Indication Signal. los : Loss of Signal. fas : Frame Alignment Signal (FAS) High Error Rate. lof : Loss of Frame (LOF) Alignment. na : Value not available. |
| STR cdx6500E1BoardHWRevAndPartNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.2.1.7 | DisplayString | read-only | Hardware Revision and part number of the board. |
| cdx6500E1StatDailyHistoryTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.4 | not-accessible | The E1 Daily History Table contains various statistics collected over the previous 24 hours which are broken into 96 completed 15 minute intervals. | |
| cdx6500E1StatDailyHistoryEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1 | not-accessible | An entry in the E1 Daily History Table. | |
| INT cdx6500E1StatDailyHistoryInterval | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.1 | INTEGER | read-only | This gives the history at 15 minute intervals.Each block represents a 15 minute interval of the day, starting from 00:15 and ending at 24:00.Thus there are 96 such blocks possible.Therefore, 1 represents the history at 00:15 . 2 represents the history at 00:30 . .......... 96 represents the history at 24:00 . |
| GAU cdx6500E1StatDailyHistoryLES | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.2 | Gauge | read-only | The number of Line Errored Seconds (LESs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryLCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.3 | Gauge | read-only | The number of Line Code Violations (LCVs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryPCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.4 | Gauge | read-only | The number of Path Coding Violations (PCVs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryCSS | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.5 | Gauge | read-only | The number of Controlled Slip Seconds (CSSs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryES | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.6 | Gauge | read-only | The number of Errored Seconds (ESs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryBES | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.7 | Gauge | read-only | The number of Bursty Errored Seconds (BESs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistorySES | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.8 | Gauge | read-only | The number of Severely Errored Seconds (SESs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistorySEFS | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.9 | Gauge | read-only | The number of Severely Errored Framing Seconds (SEFSs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryUAS | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.10 | Gauge | read-only | The number of Unavailable Seconds (UASs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| GAU cdx6500E1StatDailyHistoryDM | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.11 | Gauge | read-only | The number of Degraded Minutes (DMs) encountered by the E1 interface in one of the previous 96, individual 15 minute intervals. |
| PHY cdx6500E1StatDailyHistoryPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.4.1.12 | PhysicalPortNumber | read-only | The port number of the E1 port. |
| cdx6500E1StatABCDStateTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.6 | not-accessible | The ABCD State Table contains the current TX / RX ABCD state of the Configured DS0 Channels. | |
| cdx6500E1StatABCDStateEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.6.1 | not-accessible | An entry in the ABCD State Table. | |
| INT cdx6500E1StatABCDStateDS0ChannelNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.1 | INTEGER | read-only | Channel number of the configured DS0 channel. |
| STR cdx6500E1StatABCDStateCurrentTxState | 1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.2 | DisplayString | read-only | Current TX ABCD state of the configured DS0 channels. This object is no longer supported. |
| STR cdx6500E1StatABCDStateCurrentRxState | 1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.3 | DisplayString | read-only | Current RX ABCD state of the configured DS0 channels. |
| PHY cdx6500E1StatABCDStatePortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.6.1.4 | PhysicalPortNumber | read-only | Port number of the E1 port. |
| cdx6500E1ISDNStatusTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.8 | not-accessible | This table holds ISDN statistics information for E1 ports. | |
| cdx6500E1StatISDNStatusEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1 | not-accessible | Each entry contains statistics information for one E1 port. | |
| PHY cdx6500E1StatISDNStatusPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.1 | PhysicalPortNumber | read-only | The port number of the E1 port. |
| INT cdx6500E1StatNumRxCallsSinceLastReset | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.2 | INTEGER | read-only | The number of inbound calls that were attempted since the last statistics reset. |
| INT cdx6500E1StatNumRxCallsRejected | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.3 | INTEGER | read-only | The number of inbound calls that were rejected since the last statistics reset. |
| INT cdx6500E1StatRxLastCallFailureCause | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.4 | INTEGER | read-only | The reason the last inbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported : No call failure noAvailableVirtualPort : No Virtual Port available securityViolation : Password/Calling ID security failed noResourcesAvailable : No resources available callRejected : Call failed by Xircom card invalidPhoneNumber : Incorrect phone number outgoingCallRequestTimeout : Outgoing call request timed out callCollision : A call collision occurred virtualPortNotAvailable : Virtual port not available invalidConfiguration : Invalid configuration na : Value not available |
| STR cdx6500E1StatRxLastCalledNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.5 | DisplayString | read-only | The phone number of the virtual port of the last ISDN call made into this node. |
| STR cdx6500E1StatRxLastCallingNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.6 | DisplayString | read-only | The phone number of last party to make an ISDN call into this node. |
| STR cdx6500E1StatRxMinCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.7 | DisplayString | read-only | The minimum call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| STR cdx6500E1StatRxMaxCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.8 | DisplayString | read-only | The maximum call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| STR cdx6500E1StatRxAvgCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.9 | DisplayString | read-only | The average call duration of all inbound ISDN calls made into this node, since the last statistics reset. |
| INT cdx6500E1StatNumTxCallsSinceLastReset | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.10 | INTEGER | read-only | The number of outbound calls that were attempted since the last statistics reset. |
| INT cdx6500E1StatNumTxCallsRejected | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.11 | INTEGER | read-only | The number of outbound calls that were rejected since the last statistics reset. |
| INT cdx6500E1StatTxLastCallFailureCause | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.12 | INTEGER | read-only | The reason the last outbound call was rejected, since the last statistics reset. The posssible values are: noFailureReported : No call failure. noAvailableVirtualPort : No Virtual Port available. securityViolation : Password/Calling ID security failed. noResourcesAvailable : No resources available. callRejected : Call failed by Xircom card. invalidPhoneNumber : Incorrect phone number. outgoingCallRequestTimeout : Outgoing call request timed out. callCollision : A call collision occurred. virtualPortNotAvailable : Virtual port not available. invalidConfiguration : Invalid configuration. na : Value not available. |
| STR cdx6500E1StatTxLastCalledNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.13 | DisplayString | read-only | The phone number of the last ISDN call made by a virtual port from this node. |
| STR cdx6500E1StatTxLastCallingNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.14 | DisplayString | read-only | The phone number of the virtual port that made the last ISDN call from this node. |
| STR cdx6500E1StatTxMinCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.15 | DisplayString | read-only | The minimum call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| STR cdx6500E1StatTxMaxCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.16 | DisplayString | read-only | The maximum call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| STR cdx6500E1StatTxAvgCallDuration | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.17 | DisplayString | read-only | The average call duration of all outbound ISDN calls made from this node, since the last statistics reset. |
| INT cdx6500E1StatDchannelState | 1.3.6.1.4.1.449.2.1.3.1.1.25.8.1.18 | INTEGER | read-only | Specifies the status of the D Channel. up : The D Channel is up. down : The D Channel is down. na : Value not available. |
| cdx6500E1StatISDNCallSummaryTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.10 | not-accessible | This table holds ISDN call summary information for E1 ports. | |
| cdx6500E1StatISDNCallSummaryEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1 | not-accessible | An entry in the ISDN call summary table. | |
| INT cdx6500E1StatISDNBChannelNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.1 | INTEGER | read-only | B-Channel number of the ISDN Channel. |
| INT cdx6500E1StatISDNBChannelStatus | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.2 | INTEGER | read-only | Status of the ISDN B-Channel. The posssible values are: idle : The B-Channel is in the idle state. ringing : The B-Channel is in the ringing state. connected : The B-Channel is in the connected state. outOfService : The B-Channel is out of service. na : Value not available. |
| INT cdx6500E1StatISDNCallDirection | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.3 | INTEGER | read-only | Direction of the ISDN call on the B-Channel. The posssible values are: inbound : The current call is in the inbound direction. outbound : The current call is in the outbound direction. invalid : There is no call present. na : Value not available. |
| STR cdx6500E1StatISDNCallingNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.4 | DisplayString | read-only | This is the phone number of the party originating the ISDN call. |
| STR cdx6500E1StatISDNCalledNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.5 | DisplayString | read-only | This is the phone number of the party at the destination end of the ISDN call. |
| INT cdx6500E1StatISDNDS0Rate | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.6 | INTEGER | read-only | DS0 Rate of the ISDN B-Channel. The posssible values are: ds056k : The DS0 Rate is 56K. ds064k : The DS0 Rate is 64K. na : Value not available. |
| INT cdx6500E1StatISDNVirtualPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.7 | INTEGER | read-only | Virtual Port Number of the port using this B-Channel. A value of 0 implies that no virtual port is currently using the B-Channel. |
| STR cdx6500E1StatISDNTimeCallStarted | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.8 | DisplayString | read-only | This is the duration that the current call on this B-Channel has been connected. |
| PHY cdx6500E1StatISDNPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.10.1.9 | PhysicalPortNumber | read-only | Port number of the E1 port. |
| cdx6500E1StatLast24HoursReportTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.12 | not-accessible | This table holds a report of the cumulative sum of the statistics for the previous 24 hour interval. | |
| cdx6500E1StatLast24HoursReportEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1 | not-accessible | Each entry contains statistics information for one E1 port. | |
| PHY cdx6500E1StatLast24HoursReportPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.1 | PhysicalPortNumber | read-only | Port number of the E1 port. |
| GAU cdx6500E1StatLast24HoursReportLES | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.2 | Gauge | read-only | The number of Line Errored Seconds (LESs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportLCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.3 | Gauge | read-only | The number of Line Code Violations (LCVs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportPCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.4 | Gauge | read-only | The number of Path Coding Violations (PCVs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportCSS | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.5 | Gauge | read-only | The number of Controlled Slip Seconds (CSSs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportES | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.6 | Gauge | read-only | The number of Errored Seconds (ESs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportBES | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.7 | Gauge | read-only | The number of Bursty Errored Seconds (BESs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportSES | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.8 | Gauge | read-only | The number of Severely Errored Seconds (SESs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportSEFS | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.9 | Gauge | read-only | The number of Severely Errored Framing Seconds (SEFSs) encountered by the E1 interface in the previous 24 hour interval. |
| GAU cdx6500E1StatLast24HoursReportUAS | 1.3.6.1.4.1.449.2.1.3.1.1.25.12.1.10 | Gauge | read-only | The number of Unavailable Seconds (UASs) encountered by the E1 interface in the previous 24 hour interval. |
| cdx6500E1StatCurrent15MinutesReportTable | 1.3.6.1.4.1.449.2.1.3.1.1.25.14 | not-accessible | This table holds a report of the statistics for the current 15 minutes interval. | |
| cdx6500E1StatCurrent15MinutesReportEntry | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1 | not-accessible | Each entry contains statistics information for one E1 port. | |
| PHY cdx6500E1StatCurrent15MinutesReportPortNumber | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.1 | PhysicalPortNumber | read-only | Port number of the E1 port. |
| STR cdx6500E1StatCurrent15MinutesReportTimeElapsed | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.2 | DisplayString | read-only | The time that has elapsed since the beginning of the current 15 minutes interval. |
| GAU cdx6500E1StatCurrent15MinutesReportLES | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.3 | Gauge | read-only | The number of Line Errored Seconds (LESs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportLCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.4 | Gauge | read-only | The number of Line Code Violations (LCVs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportPCV | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.5 | Gauge | read-only | The number of Path Coding Violations (PCVs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportCSS | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.6 | Gauge | read-only | The number of Controlled Slip Seconds (CSSs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportES | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.7 | Gauge | read-only | The number of Errored Seconds (ESs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportBES | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.8 | Gauge | read-only | The number of Bursty Errored Seconds (BESs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportSES | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.9 | Gauge | read-only | The number of Severely Errored Seconds (SESs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportSEFS | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.10 | Gauge | read-only | The number of Severely Errored Framing Seconds (SEFSs) encountered by the E1 interface in the current 15 minute interval. |
| GAU cdx6500E1StatCurrent15MinutesReportUAS | 1.3.6.1.4.1.449.2.1.3.1.1.25.14.1.11 | Gauge | read-only | The number of Unavailable Seconds (UASs) encountered by the E1 interface in the current 15 minute interval. |
RFC description
Configures E1 port parameters on Codex CDX6500 devices including framing, line coding, impedance, and signal quality thresholds.
Start monitoring Codex 6500-series T1/E1 access multiplexer with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.