DPS-MIB-V38-V2EXT

All MIBs › DPS-MIB-V38-V2EXT

Organization: DPS Telecom

Last Updated: 2015-02-05

Category: Domain: Telco/Transport, Vendor: DPS Telecom

Description: Provides extended SNMPv2 objects for DPS Telecom V38 series with additional alarm and control capabilities.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DPS-MIB-V38-V2EXT?

DPS-MIB-V38-V2EXT is a second-generation SNMPv2 enterprise MIB from DPS Telecom, extending the V38 series remote telemetry/alarm monitoring units with additional alarm and control objects. It exposes device identity information (manufacturer, model, software version) alongside a dedicated alarm table that tracks each monitored alarm point's site, description, current state, severity, and the date/time it last changed. Its central purpose is fault and status monitoring: the tmonV2AlarmTable lets an operator see at a glance which alarm inputs are active, how severe they are, and when they last transitioned, while tmonV2IdentSoftwareVersion supports tracking the unit's firmware level across a fleet of remote sites. As a self-contained DPS Telecom product MIB it has no significant dependency on external standard MIBs, defining its own identity and alarm textual conventions under the tmonV2/dpsInc branches. It is typically deployed on DPS Telecom V38 remote telemetry units installed at unmanned sites such as cell towers, headends, or utility substations, where DPS-MIB-V38-V2EXT SNMP monitoring provides centralized alarm visibility.

IPNetwork Monitor allows you to monitor SNMP objects defined in DPS-MIB-V38-V2EXT. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DPS Telecom V38 series remote telemetry/alarm monitoring units

Monitoring Examples

An operator monitoring a remote cell site would walk tmonV2AlarmTable, keying on tmonV2AIndex, to see each alarm's tmonV2ADesc, tmonV2AState, and tmonV2ASeverity -- for example, a door-open or generator-fail contact flipping from normal to active. The tmonV2AChgDate and tmonV2AChgTime fields let them correlate exactly when that transition occurred against other site events. Separately, polling tmonV2IdentSoftwareVersion across a fleet of units helps confirm all remote telemetry devices are running the expected firmware before a maintenance window.

What Can Be Monitored

alarm state per monitored point
alarm severity
alarm site and description
alarm last-change date/time
device manufacturer/model/software version

Imported Objects

From RFC1155-SMI

enterprises

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
analogChannelsv2	1.3.6.1.4.1.2682.1.4.6		not-accessible	Holds information on analog channels
channelEntryv2	1.3.6.1.4.1.2682.1.4.6.1		not-accessible	Information about a particular channel
I32 channelNumberv2	1.3.6.1.4.1.2682.1.4.6.1.1	Integer32	read-only	Input channel number
STR descriptionv2	1.3.6.1.4.1.2682.1.4.6.1.3	DisplayString	read-only	The user defined description of the channel
dpsAlarmControl	1.3.6.1.4.1.2682.1
dpsInc	1.3.6.1.4.1.2682
dpsRTUv2	1.3.6.1.4.1.2682.1.4
I32 dpsRTUv2AAddress	1.3.6.1.4.1.2682.1.4.5.1.2	Integer32	read-only	RTU_port address number.
I32 dpsRTUv2Address	1.3.6.1.4.1.2682.1.4.2.1.2	Integer32	read-only	RTU_port address number.
I32 dpsRTUv2ADisplay	1.3.6.1.4.1.2682.1.4.5.1.3	Integer32	read-only	RTU_port_address display number.
dpsRTUv2AlarmEntry	1.3.6.1.4.1.2682.1.4.5.1		not-accessible	Detailed information about a particular RTU display.
dpsRTUv2AlarmGrid	1.3.6.1.4.1.2682.1.4.5		not-accessible	Holds individual alarm point information.
STR dpsRTUv2APntDesc	1.3.6.1.4.1.2682.1.4.5.1.5	DisplayString	read-only	A description of this point.
I32 dpsRTUv2APoint	1.3.6.1.4.1.2682.1.4.5.1.4	Integer32	read-only	RTU_port_address_display point number.
I32 dpsRTUv2APort	1.3.6.1.4.1.2682.1.4.5.1.1	Integer32	read-only	RTU port number.
STR dpsRTUv2AState	1.3.6.1.4.1.2682.1.4.5.1.6	DisplayString	read-only	The current state of this point.
INT dpsRTUv2CAction	1.3.6.1.4.1.2682.1.4.3.5	INTEGER	read-write	Requested action on point (RTU will ignore if invalid).
I32 dpsRTUv2CAddress	1.3.6.1.4.1.2682.1.4.3.2	Integer32	read-write	RTU_port address number.
I32 dpsRTUv2CDisplay	1.3.6.1.4.1.2682.1.4.3.3	Integer32	read-write	RTU_port_address display number.
dpsRTUv2ControlGrid	1.3.6.1.4.1.2682.1.4.3
I32 dpsRTUv2CPoint	1.3.6.1.4.1.2682.1.4.3.4	Integer32	read-write	RTU_port_display point number (1-64).
I32 dpsRTUv2CPort	1.3.6.1.4.1.2682.1.4.3.1	Integer32	read-write	RTU port number.
STR dpsRTUv2DateTime	1.3.6.1.4.1.2682.1.4.1.4	DisplayString	read-write	The RTU system date and time.
STR dpsRTUv2DispDesc	1.3.6.1.4.1.2682.1.4.2.1.4	DisplayString	read-only	A description of the associated display.
I32 dpsRTUv2Display	1.3.6.1.4.1.2682.1.4.2.1.3	Integer32	read-only	RTU_port_address display number.
dpsRTUv2DisplayEntry	1.3.6.1.4.1.2682.1.4.2.1		not-accessible	Information about a particular RTU display.
dpsRTUv2DisplayGrid	1.3.6.1.4.1.2682.1.4.2		not-accessible	Holds information on displays managed by the RTU.
STR dpsRTUv2FirmwareVersion	1.3.6.1.4.1.2682.1.4.1.3	DisplayString	read-only	The RTU firmware version.
dpsRTUv2Ident	1.3.6.1.4.1.2682.1.4.1
STR dpsRTUv2Manufacturer	1.3.6.1.4.1.2682.1.4.1.1	DisplayString	read-only	The Remote Telemetry Unit manufacturer.
STR dpsRTUv2Model	1.3.6.1.4.1.2682.1.4.1.2	DisplayString	read-only	The RTU model designation.
STR dpsRTUv2PntMap	1.3.6.1.4.1.2682.1.4.2.1.5	DisplayString	read-only	A map of the points appearing in this display.
I32 dpsRTUv2Port	1.3.6.1.4.1.2682.1.4.2.1.1	Integer32	read-only	RTU port number.
INT dpsRTUv2SyncReq	1.3.6.1.4.1.2682.1.4.1.5	INTEGER	read-write	Caution: SETting this object initiates traps for all standing alarms.
INT enabledv2	1.3.6.1.4.1.2682.1.4.6.1.2	INTEGER	read-only	Enable status of channel
INT thresholdsv2	1.3.6.1.4.1.2682.1.4.6.1.5	INTEGER	read-only	Highest threshold level crossed, if MJ, MN is assumed
I32 tmonV2AAddress	1.3.6.1.4.1.2682.1.3.2.1.12	Integer32	read-only	Address of unit reporting this point.
STR tmonV2AAuxDesc	1.3.6.1.4.1.2682.1.3.2.1.8	DisplayString	read-only	An auxiliary user-defined text string associated with the alarm (i.e. This remote needs servicing).
STR tmonV2AChgDate	1.3.6.1.4.1.2682.1.3.2.1.6	DisplayString	read-only	The date (mm/dd/yy) of the last alarm event.
STR tmonV2AChgTime	1.3.6.1.4.1.2682.1.3.2.1.7	DisplayString	read-only	The time (hh:mm:ss) of the last alarm event.
STR tmonV2ADesc	1.3.6.1.4.1.2682.1.3.2.1.3	DisplayString	read-only	A user-defined text string associated with the alarm (i.e. South Door, Generator, Power Grid 1).
STR tmonV2ADevDesc	1.3.6.1.4.1.2682.1.3.2.1.17	DisplayString	read-only	A description of the devie on which this point appears.
STR tmonV2ADispDesc	1.3.6.1.4.1.2682.1.3.2.1.9	DisplayString	read-only	A description of the display on which this point appears.
I32 tmonV2ADisplay	1.3.6.1.4.1.2682.1.3.2.1.13	Integer32	read-only	Display on which this point appears.
I32 tmonV2AEvent	1.3.6.1.4.1.2682.1.3.2.1.15	Integer32	read-only	Event id for this message.
I32 tmonV2AGAddress	1.3.6.1.4.1.2682.1.3.5.1.12	Integer32	read-only	Address of unit reporting this point.
STR tmonV2AGAuxDesc	1.3.6.1.4.1.2682.1.3.5.1.8	DisplayString	read-only	An auxiliary user-defined text string associated with the alarm (i.e. This remote needs servicing).
STR tmonV2AGChgDate	1.3.6.1.4.1.2682.1.3.5.1.6	DisplayString	read-only	The date (mm/dd/yy) of the last alarm event.
STR tmonV2AGChgTime	1.3.6.1.4.1.2682.1.3.5.1.7	DisplayString	read-only	The time (hh:mm:ss) of the last alarm event.
STR tmonV2AGDesc	1.3.6.1.4.1.2682.1.3.5.1.3	DisplayString	read-only	A user-defined text string associated with the alarm (i.e. South Door, Generator, Power Grid 1).
STR tmonV2AGDispDesc	1.3.6.1.4.1.2682.1.3.5.1.9	DisplayString	read-only	A description of the display on which this point appears.
I32 tmonV2AGDisplay	1.3.6.1.4.1.2682.1.3.5.1.13	Integer32	read-only	Display on which this point appears.
I32 tmonV2AGIndex	1.3.6.1.4.1.2682.1.3.5.1.1	Integer32	not-accessible	Tmon alarm table index (1..NumberOfAlarms).
I32 tmonV2AGPntType	1.3.6.1.4.1.2682.1.3.5.1.10	Integer32	read-only	Type of this point.
I32 tmonV2AGPoint	1.3.6.1.4.1.2682.1.3.5.1.14	Integer32	read-only	Index into display of this point.
I32 tmonV2AGPort	1.3.6.1.4.1.2682.1.3.5.1.11	Integer32	read-only	Port on which this point is reported.
STR tmonV2AGSeverity	1.3.6.1.4.1.2682.1.3.5.1.5	DisplayString	read-only	The severity of the last alarm event.
STR tmonV2AGSite	1.3.6.1.4.1.2682.1.3.5.1.2	DisplayString	read-only	The site of the alarm (i.e. Atlanta Hub, Sub-Station H32).
STR tmonV2AGState	1.3.6.1.4.1.2682.1.3.5.1.4	DisplayString	read-only	The current alarm state.
I32 tmonV2AIndex	1.3.6.1.4.1.2682.1.3.2.1.1	Integer32	not-accessible	Tmon alarm table index (1..NumberOfAlarms).
STR tmonV2AIPAddr	1.3.6.1.4.1.2682.1.3.2.1.16	DisplayString	read-only	The IP Address of the device on which this point appears.
tmonV2AlarmEntry	1.3.6.1.4.1.2682.1.3.2.1		not-accessible	Information about a particular TMonV2 alarm.
tmonV2AlarmGrid	1.3.6.1.4.1.2682.1.3.5		not-accessible	A table of TMonV2 Alarm-specific information. Returns alarm status.
tmonV2AlarmGridEntry	1.3.6.1.4.1.2682.1.3.5.1		not-accessible	Information about a particular TMonV2 alarm.
tmonV2AlarmTable	1.3.6.1.4.1.2682.1.3.2		not-accessible	A table of TMonV2 Alarm-specific information. Returns standing alarms.
tmonV2analogChannels	1.3.6.1.4.1.2682.1.3.6		not-accessible	Holds information on analog channels
I32 tmonV2APntType	1.3.6.1.4.1.2682.1.3.2.1.10	Integer32	read-only	Type of this point.
I32 tmonV2APoint	1.3.6.1.4.1.2682.1.3.2.1.14	Integer32	read-only	Index into display of this point.
I32 tmonV2APort	1.3.6.1.4.1.2682.1.3.2.1.11	Integer32	read-only	Port on which this point is reported.
STR tmonV2ASeverity	1.3.6.1.4.1.2682.1.3.2.1.5	DisplayString	read-only	The severity of the last alarm event.
STR tmonV2ASite	1.3.6.1.4.1.2682.1.3.2.1.2	DisplayString	read-only	The site of the alarm (i.e. Atlanta Hub, Sub-Station H32).
STR tmonV2AState	1.3.6.1.4.1.2682.1.3.2.1.4	DisplayString	read-only	The current alarm state.
INT tmonV2CAction	1.3.6.1.4.1.2682.1.3.3.7	INTEGER	read-write	Requested command action (tmonV2XM will ignore if invalid).
I32 tmonV2CAddress	1.3.6.1.4.1.2682.1.3.3.3	Integer32	read-write	Tmon_port address number.
STR tmonV2CAuxText	1.3.6.1.4.1.2682.1.3.3.8	DisplayString	read-write	An auxiliary user-defined text string associated with the command (i.e. User_initials).
I32 tmonV2CDisplay	1.3.6.1.4.1.2682.1.3.3.4	Integer32	read-write	Tmon_port_address display number.
I32 tmonV2CEvent	1.3.6.1.4.1.2682.1.3.3.6	Integer32	read-write	Tmon event ID.
I32 tmonV2chanAddress	1.3.6.1.4.1.2682.1.3.6.1.2	Integer32	read-only	Input channel device address reference
STR tmonV2chanDescription	1.3.6.1.4.1.2682.1.3.6.1.5	DisplayString	read-only	The user defined description of the channel
STR tmonV2chanDisplayunits	1.3.6.1.4.1.2682.1.3.6.1.9	DisplayString	read-only	The current display units of the channel value
INT tmonV2chanEnabled	1.3.6.1.4.1.2682.1.3.6.1.4	INTEGER	read-only	Enable status of channel
tmonV2channelEntry	1.3.6.1.4.1.2682.1.3.6.1		not-accessible	Information about a particular channel
I32 tmonV2chanNumber	1.3.6.1.4.1.2682.1.3.6.1.3	Integer32	read-only	Input channel number
I32 tmonV2chanPort	1.3.6.1.4.1.2682.1.3.6.1.1	Integer32	read-only	Input channel port reference
INT tmonV2chanThresholds	1.3.6.1.4.1.2682.1.3.6.1.10	INTEGER	read-only	Highest threshold level crossed, if MJ, MN is assumed
I32 tmonV2chanValueInt	1.3.6.1.4.1.2682.1.3.6.1.6	Integer32	read-only	The current value of the channel as an integer. This is the whole number only
I32 tmonV2chanValueInt100	1.3.6.1.4.1.2682.1.3.6.1.7	Integer32	read-only	The current value of the channel as an integer. This value is multiplied by 100 to preserve decimal values.
STR tmonV2chanValueStr	1.3.6.1.4.1.2682.1.3.6.1.8	DisplayString	read-only	The current value of the channel as a string
tmonV2CommandGrid	1.3.6.1.4.1.2682.1.3.3
I32 tmonV2CosEAddress	1.3.6.1.4.1.2682.1.3.4.1.12	Integer32	read-only	Address of unit reporting this point.
STR tmonV2CosEAuxDesc	1.3.6.1.4.1.2682.1.3.4.1.8	DisplayString	read-only	An auxiliary user-defined text string associated with the alarm (i.e. This remote needs servicing).
STR tmonV2CosEChgDate	1.3.6.1.4.1.2682.1.3.4.1.6	DisplayString	read-only	The date (mm/dd/yy) of the alarm event.
STR tmonV2CosEChgTime	1.3.6.1.4.1.2682.1.3.4.1.7	DisplayString	read-only	The time (hh:mm:ss) of the alarm event.
STR tmonV2CosEDesc	1.3.6.1.4.1.2682.1.3.4.1.3	DisplayString	read-only	A user-defined text string associated with the alarm (i.e. South Door, Generator, Power Grid 1).
STR tmonV2CosEDispDesc	1.3.6.1.4.1.2682.1.3.4.1.9	DisplayString	read-only	A description of the display on which this point appears.
I32 tmonV2CosEDisplay	1.3.6.1.4.1.2682.1.3.4.1.13	Integer32	read-only	Display on which this point appears.
I32 tmonV2CosEEventID	1.3.6.1.4.1.2682.1.3.4.1.15	Integer32	read-only	Unique event ID for the alarm event.
I32 tmonV2CosEIndex	1.3.6.1.4.1.2682.1.3.4.1.1	Integer32	not-accessible	Tmon change of state alarm table index (1..NumberOfAlarms).
I32 tmonV2CosEPntType	1.3.6.1.4.1.2682.1.3.4.1.10	Integer32	read-only	Type of this point.
I32 tmonV2CosEPoint	1.3.6.1.4.1.2682.1.3.4.1.14	Integer32	read-only	Index into display of this point.
I32 tmonV2CosEPort	1.3.6.1.4.1.2682.1.3.4.1.11	Integer32	read-only	Port on which this point is reported.
STR tmonV2CosESeverity	1.3.6.1.4.1.2682.1.3.4.1.5	DisplayString	read-only	The severity of the alarm event.
STR tmonV2CosESite	1.3.6.1.4.1.2682.1.3.4.1.2	DisplayString	read-only	The site of the change of state alarm (i.e. Atlanta Hub, Sub-Station H32).
STR tmonV2CosEState	1.3.6.1.4.1.2682.1.3.4.1.4	DisplayString	read-only	The alarm state.
tmonV2CosEventEntry	1.3.6.1.4.1.2682.1.3.4.1		not-accessible	Information about a particular TMonV2 change of state alarm.
tmonV2CosEventTable	1.3.6.1.4.1.2682.1.3.4		not-accessible	A table of TMonV2 Alarm-specific information. Returns change of state alarms.
I32 tmonV2CPoint	1.3.6.1.4.1.2682.1.3.3.5	Integer32	read-write	Tmon_port_display point number (1-64).
I32 tmonV2CPort	1.3.6.1.4.1.2682.1.3.3.2	Integer32	read-write	Tmon port number.
I32 tmonV2CPType	1.3.6.1.4.1.2682.1.3.3.1	Integer32	read-write	Tmon point type.
NTF tmonV2CRalarmClr	1.3.6.1.4.1.2682.1.3.11			Generated when a critical alarm clears.
NTF tmonV2CRalarmSet	1.3.6.1.4.1.2682.1.3.10			Generated when a critical alarm is set.
INT tmonV2CResult	1.3.6.1.4.1.2682.1.3.3.9	INTEGER	read-only	Command result.
tmonV2Ident	1.3.6.1.4.1.2682.1.3.1
STR tmonV2IdentManufacturer	1.3.6.1.4.1.2682.1.3.1.1	DisplayString	read-only	The TMON/XM Unit manufacturer.
STR tmonV2IdentModel	1.3.6.1.4.1.2682.1.3.1.2	DisplayString	read-only	The TMON/XM model designation.
STR tmonV2IdentSoftwareVersion	1.3.6.1.4.1.2682.1.3.1.3	DisplayString	read-only	The TMON/XM SNMP Agent software version.
NTF tmonV2MJalarmClr	1.3.6.1.4.1.2682.1.3.13			Generated when a major alarm clears.
NTF tmonV2MJalarmSet	1.3.6.1.4.1.2682.1.3.12			Generated when a major alarm is set.
NTF tmonV2MNalarmClr	1.3.6.1.4.1.2682.1.3.15			Generated when a minor alarm clears.
NTF tmonV2MNalarmSet	1.3.6.1.4.1.2682.1.3.14			Generated when a minor alarm is set.
NTF tmonV2STalarmClr	1.3.6.1.4.1.2682.1.3.17			Generated when a status alarm clears.
NTF tmonV2STalarmSet	1.3.6.1.4.1.2682.1.3.16			Generated when a status alarm is set.
tmonV2XM	1.3.6.1.4.1.2682.1.3			Second generation MIB for DPS Telecom products
STR valuev2	1.3.6.1.4.1.2682.1.4.6.1.4	DisplayString	read-only	The current value of the channel

RFC description

Provides alarm and monitoring management for DPS Telecom equipment including TMON/XM remote monitoring units.

Start monitoring DPS Telecom V38-series remote telemetry/alarm unit (2nd-gen extended) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DPS-MIB-V38-V2EXT

What Is DPS-MIB-V38-V2EXT?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description