All MIBs › DPS-MIB-V38-V2EXT › dpsRTUv2CPoint
dpsRTUv2CPoint
Module: DPS-MIB-V38-V2EXT
OID (symbolic): DPS-MIB-V38-V2EXT::dpsRTUv2CPoint
OID (numeric): 1.3.6.1.4.1.2682.1.4.3.4
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
Description: RTU_port_display point number (1-64).
What is dpsRTUv2CPoint?
This read-write OID sets the RTU_port_display point number (1-64) when issuing a control command through the RTU control grid, completing the addressing tuple before the action is sent.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.2682.1.4.3.4 snmpwalk -v2c -c public <target> DPS-MIB-V38-V2EXT::dpsRTUv2CPoint
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.2682.1.4.3.4.1 snmpget -v2c -c public <target> DPS-MIB-V38-V2EXT::dpsRTUv2CPoint.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.2682.1.4.3.4.1 i <value>
Start monitoring DPS Telecom V38-series remote telemetry/alarm unit (2nd-gen extended) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DPS-MIB-V38-V2EXT::dpsRTUv2CPoint OID value, configure state conditions and alerts, and monitor any DPS Telecom V38-series remote telemetry/alarm unit (2nd-gen extended) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.2682 | dpsInc | DPS-MIB-V38 |
| 1.3.6.1.4.1.2682.1 | dpsAlarmControl | DPS-MIB-V38 |
| 1.3.6.1.4.1.2682.1.4 | dpsRTUv2 | DPS-MIB-V38-V2 |
| 1.3.6.1.4.1.2682.1.4.3 | dpsRTUv2ControlGrid | DPS-MIB-V38-V2 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.2682.1.4.3.4 | dpsRTUv2CPoint | DPS-MIB-V38-V2EXT |