All MIBs › DKSF-70-6-X-X-1 › npIrStatus
npIrStatus
Module: DKSF-70-6-X-X-1
OID (symbolic): DKSF-70-6-X-X-1::npIrStatus
OID (numeric): 1.3.6.1.4.1.25728.7900.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: IR transiever status
What is npIrStatus?
Reports the outcome of the last IR transmission attempt: completed successfully, a protocol error, command accepted, or one of several specific error codes such as bad command number, empty record, flash-chip fault, timeout, or bus busy. Admins check this after writing npIrPlayCmd to confirm the command actually went out.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.7900.1.3 snmpwalk -v2c -c public <target> DKSF-70-6-X-X-1::npIrStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.7900.1.3.1 snmpget -v2c -c public <target> DKSF-70-6-X-X-1::npIrStatus.1
Start monitoring NetPing DKSF-70 environmental sensing/relay controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-6-X-X-1::npIrStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 environmental sensing/relay controller from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.7900 | npIr | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.7900.1 | npIrCtrl | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.7900.1.3 | npIrStatus | DKSF-70-6-X-X-1 |