All MIBs › DKSF-70-5-X-X-1 › npThermoTrapStatus
npThermoTrapStatus
Module: DKSF-70-5-X-X-1
OID (symbolic): DKSF-70-5-X-X-1::npThermoTrapStatus
OID (numeric): 1.3.6.1.4.1.25728.8800.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
What is npThermoTrapStatus?
This carries the sensor's fault/underheat/normal/overheat status at the moment a thermal status-change trap was generated. An admin uses this value in the trap payload to immediately know the severity of the reported temperature event without polling the sensor separately.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3 snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npThermoTrapStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3.1 snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npThermoTrapStatus.1
Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npThermoTrapStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.2 | npThermoTraps | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.2.3 | npThermoTrapStatus | DKSF-70-5-X-X-1 |