DKSF-70-5-X-X-1 :: npIoSinglePulseDuration

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-70-5-X-X-1npIoSinglePulseDuration

npIoSinglePulseDuration

Module: DKSF-70-5-X-X-1

OID (symbolic): DKSF-70-5-X-X-1::npIoSinglePulseDuration

OID (numeric): 1.3.6.1.4.1.25728.8900.1.1.12

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Set duration of single pulse on IO output line, 100ms to 25500ms, min. step is 100ms

What is npIoSinglePulseDuration?

This sets the duration, from 100ms to 25500ms in 100ms steps, of the single output pulse triggered by npIoSinglePulseStart. An admin configures this to match the pulse width an attached device (e.g., a gate opener) expects to receive.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.12
snmpwalk -v2c -c public <target> DKSF-70-5-X-X-1::npIoSinglePulseDuration

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8900.1.1.12.1
snmpget -v2c -c public <target> DKSF-70-5-X-X-1::npIoSinglePulseDuration.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.8900.1.1.12.1 i <value>

Start monitoring NetPing DKSF-70 remote sensing/relay device with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-5-X-X-1::npIoSinglePulseDuration OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing/relay device from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900npIoDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900.1npIoTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8900.1.1npIoEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.8900.1.1.12npIoSinglePulseDurationDKSF-70-5-X-X-1