All MIBs › DKSF-70-3-X-X-1 › npThermoTrapStatus
npThermoTrapStatus
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npThermoTrapStatus
OID (numeric): 1.3.6.1.4.1.25728.8800.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
What is npThermoTrapStatus?
This read-only INTEGER, carried as varbind data in an npThermoTrap notification, reports the sensor's status at trap time: failed(0), low(1), norm(2), or high(3). An admin uses this to immediately see whether the trap was raised by an under- or over-temperature condition, or a sensor failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npThermoTrapStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npThermoTrapStatus.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npThermoTrapStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.2 | npThermoTraps | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8800.2.3 | npThermoTrapStatus | DKSF-70-3-X-X-1 |