All MIBs › DKSF-70-3-X-X-1 › npRelHumSensorValueT
npRelHumSensorValueT
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npRelHumSensorValueT
OID (numeric): 1.3.6.1.4.1.25728.8400.2.4
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Sensor temperature, deg.C
What is npRelHumSensorValueT?
This read-only INTEGER (-60 to 200) reports the temperature measured by the combined humidity/temperature sensor, in degrees Celsius. An admin reads this alongside npRelHumSensorValueH to get both environmental readings from the same probe.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.4 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSensorValueT
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.4.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSensorValueT.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npRelHumSensorValueT OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8400.2.4 | npRelHumSensorValueT | DKSF-70-3-X-X-1 |