All MIBs › DKSF-70-3-X-X-1 › npRelHumSensorStatus
npRelHumSensorStatus
Module: DKSF-70-3-X-X-1
OID (symbolic): DKSF-70-3-X-X-1::npRelHumSensorStatus
OID (numeric): 1.3.6.1.4.1.25728.8400.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the Rel.Humidity Sensor One 1=Normal, 0=Error or Sensor isn't connected
What is npRelHumSensorStatus?
This read-only INTEGER reports whether the relative-humidity sensor is functioning: error(0) meaning a fault or the sensor isn't connected, or ok(1) meaning normal. An admin checks this before trusting npRelHumSensorValueH, since a disconnected humidity probe would otherwise show a stale or misleading reading.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.3 snmpwalk -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSensorStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.3.1 snmpget -v2c -c public <target> DKSF-70-3-X-X-1::npRelHumSensorStatus.1
Start monitoring NetPing DKSF-70 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-70-3-X-X-1::npRelHumSensorStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-70 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.8400.2.3 | npRelHumSensorStatus | DKSF-70-3-X-X-1 |