DKSF-60-4-X-X-X :: npThermoTrapSensorN

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-60-4-X-X-XnpThermoTrapSensorN

npThermoTrapSensorN

Module: DKSF-60-4-X-X-X

OID (symbolic): DKSF-60-4-X-X-X::npThermoTrapSensorN

OID (numeric): 1.3.6.1.4.1.25728.8800.2.1

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description: The id of temperature sensor, 1 to 8

What is npThermoTrapSensorN?

This read-only INTEGER is the sensor-id value carried inside an npThermoTrap notification, telling the receiving NMS which of the up to 8 temperature sensors triggered the trap. An admin uses it in trap-handling rules to route or label alerts by sensor, such as identifying that sensor 3's alert corresponds to the server room probe.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.1
snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npThermoTrapSensorN

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.1.1
snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npThermoTrapSensorN.1

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> npThermoTrapSensorN.1

Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npThermoTrapSensorN OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8800npThermoDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.8800.2npThermoTrapsDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.8800.2.1npThermoTrapSensorNDKSF-60-4-X-X-X