All MIBs › DKSF-60-4-X-X-X › npIrPlayCmd
npIrPlayCmd
Module: DKSF-60-4-X-X-X
OID (symbolic): DKSF-60-4-X-X-X::npIrPlayCmd
OID (numeric): 1.3.6.1.4.1.25728.7900.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Write IR command number to send IR command
What is npIrPlayCmd?
This read-write INTEGER is a command register: writing a number from 1 to 16 tells the device's built-in IR transceiver to transmit the corresponding pre-recorded infrared command. An admin uses this to remotely operate IR-controlled equipment, like turning a TV or AC unit on or off over the network.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.7900.1.1 snmpwalk -v2c -c public <target> DKSF-60-4-X-X-X::npIrPlayCmd
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.7900.1.1.1 snmpget -v2c -c public <target> DKSF-60-4-X-X-X::npIrPlayCmd.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.7900.1.1.1 i <value>
Start monitoring NetPing DKSF-60 remote power/relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-60-4-X-X-X::npIrPlayCmd OID value, configure state conditions and alerts, and monitor any NetPing DKSF-60 remote power/relay control unit from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.7900 | npIr | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.7900.1 | npIrCtrl | DKSF-201-9-X-X-1 |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728.7900.1.1 | npIrPlayCmd | DKSF-60-4-X-X-X |