DKSF-50-8-1-A-X :: npPwrResetsCounter

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsDKSF-50-8-1-A-XnpPwrResetsCounter

npPwrResetsCounter

Module: DKSF-50-8-1-A-X

OID (symbolic): DKSF-50-8-1-A-X::npPwrResetsCounter

OID (numeric): 1.3.6.1.4.1.25728.5800.3.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-write

Description: Counter of watchdog resets Write 0 to clear.

What is npPwrResetsCounter?

Counts how many times the watchdog has power-cycled this channel since the counter was last cleared, and can be reset by writing 0 to it. Rising counts on a particular channel are a sign that the attached equipment is repeatedly hanging and needing forced reboots.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.5800.3.1.4
snmpwalk -v2c -c public <target> DKSF-50-8-1-A-X::npPwrResetsCounter

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.5800.3.1.4.1
snmpget -v2c -c public <target> DKSF-50-8-1-A-X::npPwrResetsCounter.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.25728.5800.3.1.4.1 i <value>

Start monitoring NetPing DKSF-50 IP-based remote power/relay and sensor controller with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-50-8-1-A-X::npPwrResetsCounter OID value, configure state conditions and alerts, and monitor any NetPing DKSF-50 IP-based remote power/relay and sensor controller from a single console.

OID Breakdown

Upper-level ancestors (10 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.25728lightcomDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800npPwrDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800.3npPwrTableDKSF-201-9-X-X-1
1.3.6.1.4.1.25728.5800.3.1npPwrEntryDKSF-201-9-X-X-1
Numeric OIDNameModule
1.3.6.1.4.1.25728.5800.3.1.4npPwrResetsCounterDKSF-50-8-1-A-X