All MIBs › DKSF-201-9-X-X-1 › npThermoTrapStatus
npThermoTrapStatus
Module: DKSF-201-9-X-X-1
OID (symbolic): DKSF-201-9-X-X-1::npThermoTrapStatus
OID (numeric): 1.3.6.1.4.1.25728.8800.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Temperature status (0=fault, 1=underheat, 2=normal, 3=overheat)
What is npThermoTrapStatus?
This OID, carried in the npThermoTrap notification, reports the sensor's status at alert time as fault, underheat, normal, or overheat. An admin uses it to immediately understand the nature of a temperature alarm without cross-referencing separate objects.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3 snmpwalk -v2c -c public <target> DKSF-201-9-X-X-1::npThermoTrapStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8800.2.3.1 snmpget -v2c -c public <target> DKSF-201-9-X-X-1::npThermoTrapStatus.1
Start monitoring NetPing DKSF-201 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-201-9-X-X-1::npThermoTrapStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-201 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800 | npThermo | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.2 | npThermoTraps | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8800.2.3 | npThermoTrapStatus | DKSF-201-9-X-X-1 |