All MIBs › DKSF-201-9-X-X-1 › npRelHumSensorStatus
npRelHumSensorStatus
Module: DKSF-201-9-X-X-1
OID (symbolic): DKSF-201-9-X-X-1::npRelHumSensorStatus
OID (numeric): 1.3.6.1.4.1.25728.8400.2.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: Status of the Rel.Humidity Sensor One 0=Normal, 1=Error or Sensor isn't connected
What is npRelHumSensorStatus?
This OID reports whether the relative-humidity sensor is functioning normally or is in an error state (including not being connected). An admin checks this before trusting the humidity readings from that channel.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.3 snmpwalk -v2c -c public <target> DKSF-201-9-X-X-1::npRelHumSensorStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.25728.8400.2.3.1 snmpget -v2c -c public <target> DKSF-201-9-X-X-1::npRelHumSensorStatus.1
Start monitoring NetPing DKSF-201 remote sensing and relay control unit with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the DKSF-201-9-X-X-1::npRelHumSensorStatus OID value, configure state conditions and alerts, and monitor any NetPing DKSF-201 remote sensing and relay control unit from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.25728 | lightcom | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400 | npRelHumidity | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2 | npRelHumSensor | DKSF-201-9-X-X-1 |
| 1.3.6.1.4.1.25728.8400.2.3 | npRelHumSensorStatus | DKSF-201-9-X-X-1 |