DGPRPM-MIB

All MIBs › DGPRPM-MIB

Category: Hardware and Environment

Description: Manages remote power management and outlet control for DGP power management equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DGPRPM-MIB?

DGPRPM-MIB is a private MIB (enterprise OID 17420) for a networked Remote Power Manager (RPM), a device controlling multiple switched AC outlets. Its objects cover a management-protocol selection and an outlet table (keyed by RPM ID) recording outlet number, state, control type, local/Internet access mode, name, and up to eight named outlets (A-H) with per-outlet power-on delay times. As a hardware-control/status MIB it lets an administrator remotely power-cycle a specific outlet and confirm its current state. It is deployed on this vendor's networked Remote Power Manager (RPM) appliances. Engineers can download the DGPRPM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DGPRPM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Networked Remote Power Manager (RPM) appliances

Monitoring Examples

An administrator remotely toggles rpmOutletState for a hung server's power outlet to force a hard reboot without needing physical access to the rack.

What Can Be Monitored

per-outlet power state and control configuration

Imported Objects

From RFC-1212

OBJECT-TYPE

From RFC-1215

TRAP-TYPE

From RFC1155-SMI

enterprises

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
dgp	1.3.6.1.4.1.17420
NTF rpmOutletOn	1.3.6.1.4.1.17420.0.100			WARNING: The specified RPM outlet has turned on.
NTF rpmOutletOff	1.3.6.1.4.1.17420.0.101			WARNING: The specified RPM outlet has turned off.
NTF rpmOutletReboot	1.3.6.1.4.1.17420.0.102			WARNING: The specified RPM outlet has rebooted.
NTF rpmOutletfault	1.3.6.1.4.1.17420.0.103			SEVERE: The specified rpm outlet has fault.
NTF rpmCommunicationLost	1.3.6.1.4.1.17420.0.104			SEVERE: Communication to the UPS has been lost. Steps to reestablish communication are in progress.
NTF cpsOutOfThreshold1	1.3.6.1.4.1.17420.0.105			WARNING: CPS current out of threshold 1.
NTF cpsOutOfThreshold2	1.3.6.1.4.1.17420.0.106			CRITICAL: CPS current out of threshold 2.
NTF cpsCommunicationLost	1.3.6.1.4.1.17420.0.107			CRITICAL: CPS Communication lost.
products	1.3.6.1.4.1.17420.1
hardware	1.3.6.1.4.1.17420.1.1
INT protocol	1.3.6.1.4.1.17420.1.1.1	INTEGER	read-write	select protocol
rpm	1.3.6.1.4.1.17420.1.1.3
INT rpmNumber	1.3.6.1.4.1.17420.1.1.3.1	INTEGER	read-only	Indicate how many rpm attached to this system.
rpmTable	1.3.6.1.4.1.17420.1.1.3.2		not-accessible	The number of entries is contained in the rpmNumber OID.
rpmEntry	1.3.6.1.4.1.17420.1.1.3.2.1		not-accessible	An entry containing information of an rpm.
INT rpmID	1.3.6.1.4.1.17420.1.1.3.2.1.1	INTEGER	read-only	The ID number of rpm.
INT rpmOutletNumber	1.3.6.1.4.1.17420.1.1.3.2.1.2	INTEGER	read-only	The number of outlets for the rpm.
STR rpmOutletState	1.3.6.1.4.1.17420.1.1.3.2.1.3	DisplayString	read-only	Getting this OID will cause the status of all outlets to be returned. This OID is provided for informational purposes only. The format of the data returned is a character string consisting of a character from '0' to '3'. '0' if the outlet is off. '1' if the outlet is on. '2' if the outlet is in shutdown pending state. '3' if the outlet is fault. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,2,0,3', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is on, outlet 2 is in shutdown pending state, outlet 3 is off, outlet 4 is fault.
STR rpmControlType	1.3.6.1.4.1.17420.1.1.3.2.1.4	DisplayString	read-write	Getting this OID will cause the status of all outlets to be returned. The format of the data returned is a character string consisting of a character from '0' to '2'. '0' if the outlet is instant shutdown. '1' if the outlet is safe shutdown. '2' if the outlet is safe reboot. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,2,0,1', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is safe shutdown, outlet 2 is safe reboot, outlet 3 is instant shutdown, outlet 4 is safe shutdown.
STR rpmInternetLocal	1.3.6.1.4.1.17420.1.1.3.2.1.5	DisplayString	read-write	Getting this OID will cause the status of all outlets to be returned. The format of the data returned is a character string consisting of a character from '0' to '1'. '0' if the outlet is Internet. '1' if the outlet is Local. A comma character will delimit each outlet entry in the string. For exampe: If the returned string is '1,1,0,1', it means the iSwith has 4 outlets and the outlets status are the following: outlet 1 is Local, outlet 2 is Local, outlet 3 is Internet, outlet 4 is Local.
STR rpmName	1.3.6.1.4.1.17420.1.1.3.2.1.6	DisplayString	read-write
STR rpmOutletA	1.3.6.1.4.1.17420.1.1.3.2.1.7	DisplayString	read-write
STR rpmOutletB	1.3.6.1.4.1.17420.1.1.3.2.1.8	DisplayString	read-write
STR rpmOutletC	1.3.6.1.4.1.17420.1.1.3.2.1.9	DisplayString	read-write
STR rpmOutletD	1.3.6.1.4.1.17420.1.1.3.2.1.10	DisplayString	read-write
STR rpmOutletE	1.3.6.1.4.1.17420.1.1.3.2.1.11	DisplayString	read-write
STR rpmOutletF	1.3.6.1.4.1.17420.1.1.3.2.1.12	DisplayString	read-write
STR rpmOutletG	1.3.6.1.4.1.17420.1.1.3.2.1.13	DisplayString	read-write
STR rpmOutletH	1.3.6.1.4.1.17420.1.1.3.2.1.14	DisplayString	read-write
INT rpmDelayA	1.3.6.1.4.1.17420.1.1.3.2.1.15	INTEGER	read-write
INT rpmDelayB	1.3.6.1.4.1.17420.1.1.3.2.1.16	INTEGER	read-write
INT rpmDelayC	1.3.6.1.4.1.17420.1.1.3.2.1.17	INTEGER	read-write
INT rpmDelayD	1.3.6.1.4.1.17420.1.1.3.2.1.18	INTEGER	read-write
INT rpmDelayE	1.3.6.1.4.1.17420.1.1.3.2.1.19	INTEGER	read-write
INT rpmDelayF	1.3.6.1.4.1.17420.1.1.3.2.1.20	INTEGER	read-write
INT rpmDelayG	1.3.6.1.4.1.17420.1.1.3.2.1.21	INTEGER	read-write
INT rpmDelayH	1.3.6.1.4.1.17420.1.1.3.2.1.22	INTEGER	read-write
INT rpmResumeDelayA	1.3.6.1.4.1.17420.1.1.3.2.1.23	INTEGER	read-write
INT rpmResumeDelayB	1.3.6.1.4.1.17420.1.1.3.2.1.24	INTEGER	read-write
INT rpmResumeDelayC	1.3.6.1.4.1.17420.1.1.3.2.1.25	INTEGER	read-write
INT rpmResumeDelayD	1.3.6.1.4.1.17420.1.1.3.2.1.26	INTEGER	read-write
INT rpmResumeDelayE	1.3.6.1.4.1.17420.1.1.3.2.1.27	INTEGER	read-write
INT rpmResumeDelayF	1.3.6.1.4.1.17420.1.1.3.2.1.28	INTEGER	read-write
INT rpmResumeDelayG	1.3.6.1.4.1.17420.1.1.3.2.1.29	INTEGER	read-write
INT rpmResumeDelayH	1.3.6.1.4.1.17420.1.1.3.2.1.30	INTEGER	read-write
rpmSetEntry	1.3.6.1.4.1.17420.1.1.3.3
INT rpmSetID	1.3.6.1.4.1.17420.1.1.3.3.1	INTEGER	read-write	The ID number of rpm.
INT rpmOnNumber	1.3.6.1.4.1.17420.1.1.3.3.2	INTEGER	read-write	The on number of outlets for the rpm.
INT rpmOffNumber	1.3.6.1.4.1.17420.1.1.3.3.3	INTEGER	read-write	The off number of outlets for the rpm.
INT rpmAllOnOff	1.3.6.1.4.1.17420.1.1.3.3.4	INTEGER	read-write	The all outlets on/off for the rpm. 0 for all outlets off, 1 for all outlets on
rpmScheduleTable	1.3.6.1.4.1.17420.1.1.3.4		not-accessible
rpmScheduleEntry	1.3.6.1.4.1.17420.1.1.3.4.1		not-accessible	An entry containing information of an rpm.
INT rpmScheduleIndex	1.3.6.1.4.1.17420.1.1.3.4.1.1	INTEGER	read-only
INT rpmScheduleID	1.3.6.1.4.1.17420.1.1.3.4.1.2	INTEGER	read-write	The Schedule shutdown ID number of rpm.
INT rpmOutlet	1.3.6.1.4.1.17420.1.1.3.4.1.3	INTEGER	read-write	The specified outlet in rpm.
INT rpmOutletAction	1.3.6.1.4.1.17420.1.1.3.4.1.4	INTEGER	read-write	On/Off schedule entry.
INT rpmPeriod	1.3.6.1.4.1.17420.1.1.3.4.1.5	INTEGER	read-write	The period of shutdown.
STR rpmDate	1.3.6.1.4.1.17420.1.1.3.4.1.6	DisplayString	read-write	The shutdown date.
STR rpmTime	1.3.6.1.4.1.17420.1.1.3.4.1.7	DisplayString	read-write	The shutdown time.
INT rpmStatus	1.3.6.1.4.1.17420.1.1.3.4.1.8	INTEGER	read-write	Accept/Clear schedule entry.
cps	1.3.6.1.4.1.17420.1.1.4
INT cpsNumber	1.3.6.1.4.1.17420.1.1.4.1	INTEGER	read-only	Indicate how many cps attached to this system.
cpsTable	1.3.6.1.4.1.17420.1.1.4.2		not-accessible	The number of entries is contained in the cpsNumber OID.
cpsEntry	1.3.6.1.4.1.17420.1.1.4.2.1		not-accessible	An entry containing information of an cps.
INT cpsID	1.3.6.1.4.1.17420.1.1.4.2.1.1	INTEGER	read-only	The ID number of cps.
INT cpsValue	1.3.6.1.4.1.17420.1.1.4.2.1.2	INTEGER	read-only	Indicate the current of cps detect.
INT cpsThreshold1	1.3.6.1.4.1.17420.1.1.4.2.1.3	INTEGER	read-only	Indicate current threshold 1.
INT cpsThreshold2	1.3.6.1.4.1.17420.1.1.4.2.1.4	INTEGER	read-only	Indicate current threshold 2.
cpsSetTable	1.3.6.1.4.1.17420.1.1.4.3		not-accessible	The number of entries is contained in the cpsNumber OID.
cpsSetEntry	1.3.6.1.4.1.17420.1.1.4.3.1		not-accessible	An entry containing information of an cps.
INT cpsIDIndex	1.3.6.1.4.1.17420.1.1.4.3.1.1	INTEGER	read-only	The ID number of cps.
INT cpsSetThreshold1	1.3.6.1.4.1.17420.1.1.4.3.1.2	INTEGER	read-write	Set current threshold 1.
INT cpsSetThreshold2	1.3.6.1.4.1.17420.1.1.4.3.1.3	INTEGER	read-write	Set current threshold 2.
ats	1.3.6.1.4.1.17420.1.1.5
STR atsIdentification	1.3.6.1.4.1.17420.1.1.5.1	DisplayString	read-write
STR atsInputPowerSourceA	1.3.6.1.4.1.17420.1.1.5.2	DisplayString	read-write
STR atsInputPowerSourceB	1.3.6.1.4.1.17420.1.1.5.3	DisplayString	read-write
INT atsAutomaticTransferSwitch	1.3.6.1.4.1.17420.1.1.5.4	INTEGER	read-write
INT atsStatus	1.3.6.1.4.1.17420.1.1.5.5	INTEGER	read-only
mgmt	1.3.6.1.4.1.17420.1.1.999
snmp	1.3.6.1.4.1.17420.1.1.999.1
accessTable	1.3.6.1.4.1.17420.1.1.999.1.1		not-accessible
accessEntry	1.3.6.1.4.1.17420.1.1.999.1.1.1		not-accessible
INT accessNo	1.3.6.1.4.1.17420.1.1.999.1.1.1.1	INTEGER	read-only
STR community	1.3.6.1.4.1.17420.1.1.999.1.1.1.2	DisplayString	read-write
INT permission	1.3.6.1.4.1.17420.1.1.999.1.1.1.3	INTEGER	read-write

RFC description

MIB for managing Digipower remote power management units and their hardware components.

Start monitoring Networked Remote Power Manager (RPM) appliance with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DGPRPM-MIB

What Is DGPRPM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description