DCLRA-MIB-MIB

All MIBs › DCLRA-MIB-MIB

Category: SNMP Framework

Description: Defines management objects for DCLRA device configuration and line reporting automation.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DCLRA-MIB-MIB?

DCLRA-MIB-MIB is a Dell (enterprise OID 412) proprietary MIB implementing the DMTF DMI "component ID" group — attributes common to every managed component under the Dell Lightweight Remote Access (LRA) framework, alongside Dell-specific LRA action controls. Its component-ID table records manufacturer, product, version, serial number, installation date, and a verification flag common to all components, while its action table exposes Dell-specific remote-access control actions. As an inventory/configuration MIB it lets an administrator confirm a component's identity fields via the standard DMI attributes and trigger LRA-specific remote actions. It is deployed on Dell server hardware supporting DMI-based lightweight remote access. Engineers can download the DCLRA-MIB-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in DCLRA-MIB-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Dell server hardware with DMI-based Lightweight Remote Access (LRA)

Monitoring Examples

An administrator reads the standard component-ID attributes (manufacturer, product, serial number) via dMTFComponentIDTable to confirm hardware identity before triggering a remote action through dellLRAActionTableTable.

What Can Be Monitored

component identity attributes (manufacturer/product/serial/version)

Imported Objects

From DMTF-DMI-MIB

DmiDate
DmiInteger64
dmiCompId	OBJECT-TYPE
dmiEventAssociatedGroup	OBJECT-TYPE
dmiEventDateTime	OBJECT-TYPE
dmiEventSeverity	OBJECT-TYPE
dmiEventStateKey	OBJECT-TYPE
dmiEventSubSystem	OBJECT-TYPE
dmiEventSystem	OBJECT-TYPE

From HOST-RESOURCES-MIB

InternationalDisplayString

From RFC-1212

OBJECT-TYPE

From RFC1155-SMI

Counter
Gauge
enterprises

From RFC1213-MIB

DisplayString

From SNMPv2-SMI

Counter64

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR actionExecuteAtt3	1.3.6.1.4.1.674.10891.313.1.3	DmiDisplaystring	read-write	This takes an argument of the application to execute & arguments if the Execute Application bit is set. Specialized argument fields exist: %A - Address of MIF generating alert: cid,gid,(keys) %N - Name of alert (Temperature sensor detected a failure) %L - Location of alert (Harrier 1 ) %T - Trap number of alert (260) %S - Severity of alert
INT actionNameAtt1	1.3.6.1.4.1.674.10891.313.1.1	INTEGER	read-only	This specifies the Dell trap which generates the action
STR actionResponseAtt2	1.3.6.1.4.1.674.10891.313.1.2	DmiDisplaystring	read-write	This is a secure bit field which specifies which actions are to be performed.Bitfield is as follows: 0x001 = Beep 0x002 = Console Alert 0x004 = Broadcast 0x008 = Shutdown OS 0x010 = Reset 0x020 = Power Cycle 0x040 = Power Off 0x080 = Log Reset/PowerCycle/PowerOff 0x100 = Execute Application (uses actionExecute string)
STR actionSourceAtt4	1.3.6.1.4.1.674.10891.313.1.4	DmiDisplaystring	read-only	This contains a combined key for mapping non-dell indications to a LRA format. Format is: MIFNAME;GID;KEY;AID;# MIFNAME - Text name of MIF GID - Group ID KEY - Row index AID - Attribute ID # - Trap number to map to
STR beepClearAtt1	1.3.6.1.4.1.674.10891.315.1.1	DmiDisplaystring	read-write	Setting this field to a non-zero number will cancel the current beeping event
STR beepDelayAtt2	1.3.6.1.4.1.674.10891.315.1.2	DmiDisplaystring	read-write	Sleep time (in seconds) between repeating beeps
NUM buildNumberAtt3	1.3.6.1.4.1.674.10891.400.1.3	DmiInteger	read-only	The build number of this Systems Management Software product.
dell	1.3.6.1.4.1.674
dellLRAActionTableEntry	1.3.6.1.4.1.674.10891.313.1		not-accessible	This table describes the actions to be performed whenever a particular indication is generated.
INT dellLRAActionTableState	1.3.6.1.4.1.674.10891.313.1.0	INTEGER	read-write
dellLRAActionTableTable	1.3.6.1.4.1.674.10891.313		not-accessible	This table describes the actions to be performed whenever a particular indication is generated.
dellLRABeepActionEntry	1.3.6.1.4.1.674.10891.315.1		not-accessible	This group describes information for the beep response whenever a particular indication is generated.
dellLRABeepActionTable	1.3.6.1.4.1.674.10891.315		not-accessible	This group describes information for the beep response whenever a particular indication is generated.
dellLRACapabilitiesEntry	1.3.6.1.4.1.674.10891.314.1		not-accessible	This class's attribute describes which LRA capabilities can be performed on this machine.
dellLRACapabilitiesTable	1.3.6.1.4.1.674.10891.314		not-accessible	This class's attribute describes which LRA capabilities can be performed on this machine.
dELLSystemsManagementSoftwareEntry	1.3.6.1.4.1.674.10891.400.1		not-accessible	This group defines the attributes of the management software which instruments this component.
dELLSystemsManagementSoftwareTable	1.3.6.1.4.1.674.10891.400		not-accessible	This group defines the attributes of the management software which instruments this component.
STR descriptionAtt4	1.3.6.1.4.1.674.10891.400.1.4	DmiDisplaystring	read-only	A description of this Systems Management Software product.
STR dMIRPCTypesAtt7	1.3.6.1.4.1.674.10891.400.1.7	DmiDisplaystring	read-only	This field describes the RPC type, if any, for instance DCE:ncac -ip-tcp or ONC:tcpip. A semi-colon may seperate multiple supports, such as DCE:ncasn-ip-tcp;ONC:tcpip. This field should be empty if DMI RPC is not supported.
dmtf	1.3.6.1.4.1.412
dMTFComponentIDEntry	1.3.6.1.4.1.412.2.1.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
dMTFComponentIDTable	1.3.6.1.4.1.412.2.1.1		not-accessible	This group defines the attributes common to all components. This group is required.
dmtfDynOids	1.3.6.1.4.1.412.3
dmtfServiceLayerMIF	1.3.6.1.4.1.412.2.1
dmtfStdMifs	1.3.6.1.4.1.412.2
DMI installationAtt5	1.3.6.1.4.1.412.2.1.1.1.5	DmiDate	read-only	The time and date when this component was installed.
NUM lRACapabilitiesAtt1	1.3.6.1.4.1.674.10891.314.1.1	DmiInteger	read-only	This value describes what LRA actions may be taken on this system.
STR manufacturerAtt1	1.3.6.1.4.1.412.2.1.1.1.1	DmiDisplaystring	read-only	Manufacturer of this system.
INT preferredProtocolAtt6	1.3.6.1.4.1.674.10891.400.1.6	INTEGER	read-only	This is a field which is used to indicate which protocol is the preferred method for gathering management information. This is value is set by the instrumentation based on performance and features of protocols available.
STR productAtt1	1.3.6.1.4.1.674.10891.400.1.1	DmiDisplaystring	read-only	The name of the Systems Management Software product that instruments this component.
STR productAtt2	1.3.6.1.4.1.412.2.1.1.1.2	DmiDisplaystring	read-only	Product name for this system.
STR serialNumberAtt4	1.3.6.1.4.1.412.2.1.1.1.4	DmiDisplaystring	read-only	Serial number for this system.
server2	1.3.6.1.4.1.674.10891
NUM supportedProtocolsAtt5	1.3.6.1.4.1.674.10891.400.1.5	DmiInteger	read-only	This is a bit map field which is used to list protocols which can be used to access the systems management information. This is a bit map where a value of 1 indicates that the protocol is supported. Values are based on the Protocol-Type enum. Mappers will be listed in this list, but not as preferred protocols.
STR uDPInformationAtt5	1.3.6.1.4.1.674.10891.313.1.5	DmiDisplaystring	read-write	Account Information for LRA Execute User applications.
INT verifyAtt6	1.3.6.1.4.1.412.2.1.1.1.6	INTEGER	read-only	A code that provides a level of verification that the component is still installed and working.
STR versionAtt2	1.3.6.1.4.1.674.10891.400.1.2	DmiDisplaystring	read-only	The version for the Systems Management Software.
STR versionAtt3	1.3.6.1.4.1.412.2.1.1.1.3	DmiDisplaystring	read-only	Version number of this system.

RFC description

Dell enterprise SNMP MIB for managing Dell server hardware components and remote access controller functionality through standardized SNMP OID definitions.

Start monitoring Dell server hardware with DMI-based Lightweight Remote Access (LRA) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DCLRA-MIB-MIB

What Is DCLRA-MIB-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description