DASAN-EPON-MIB

All MIBs › DASAN-EPON-MIB

Organization: DASAN Co., Ltd.

Last Updated: 2005-04-13

Category: GPON/EPON

Description: Manages EPON (Ethernet Passive Optical Network) OLT and ONU configuration on DASAN platforms.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is DASAN-EPON-MIB?

DASAN-EPON-MIB is a vendor-specific MIB module from DASAN Network Solutions implementing Ethernet Passive Optical Network (EPON) access technology, covering Optical Line Terminal (OLT) port and channel management. It exposes configuration and status data for EPON system ports and logical channels, including port registration mode and per-channel LLID (Logical Link ID) assignments used to multiplex ONUs onto a shared PON fiber. It is used to monitor hardware and software status of the OLT — administrators poll port operational status, reset counters, and channel/node mappings to detect a port or ONU going down, a channel losing its LLID binding, or a port stuck in an abnormal registration state. It builds on the general SNMPv2 SMI framework and complements standard IF-MIB interface counters rather than replacing them. Typical deployment is a DASAN EPON OLT chassis in a fiber-to-the-home/business access network, where operators can download the DASAN-EPON-MIB file to load it into their MIB browser or NMS for PON port and channel health monitoring.

IPNetwork Monitor allows you to monitor SNMP objects defined in DASAN-EPON-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

DASAN EPON OLT
EPON ONU

Monitoring Examples

An admin would poll dsEPonSystemPortTable/dsEPonSystemPortEntry for dsEPonSystemPortStatus and dsEPonSystemPortRegMode to confirm each ONU-facing port is registered and passing traffic, and use dsEPonStatusReset to clear counters after a fiber splice. dsEPonSystemChannelTable/dsEPonSystemChannelEntry indexed by dsEPonSystemChannelNodeIndex and dsEPonSystemChannelPortIndex expose dsEPonSystemChannelId and dsEPonSystemChannelLlid, letting an operator verify LLID assignment; a channel showing an unexpected or zero LLID indicates an ONU has dropped off the PON. Repeated dsEPonSystemPortRequest activity without a corresponding status change would flag a stuck provisioning request.

What Can Be Monitored

EPON port status
port registration mode
EPON channel/LLID mapping
port reset/counter state
node-to-port channel index

Imported Objects

From DASAN-SMI

dasanMgmt

OBJECT-IDENTITY

From DASAN-SWITCH-MIB

dsPortModuleIndex	OBJECT-TYPE
dsPortPortIndex	OBJECT-TYPE
dsSwitchModules	OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
mib-2

From SNMPv2-TC

AutonomousType
DisplayString
PhysAddress
RowStatus
TEXTUAL-CONVENTION
TestAndIncr
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using dsEPonDeviceInOctets OID:

Select a DASAN EPON OLT/ONU as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type dsEPonDeviceInOctets into the Find box to locate it in the OID tree, then select it and click OK. The number of octets received on this device's EPON interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
dasanPonMIB	1.3.6.1.4.1.6296.9.11			.
dasanEPonMIBObjects	1.3.6.1.4.1.6296.9.11.2
dsEPon	1.3.6.1.4.1.6296.9.11.2.1
dsEPonSystem	1.3.6.1.4.1.6296.9.11.2.1.1
dsEPonSystemInfo	1.3.6.1.4.1.6296.9.11.2.1.1.1
INT dsEPonStatusReset	1.3.6.1.4.1.6296.9.11.2.1.1.1.1	INTEGER	read-write	.
dsEPonSystemPort	1.3.6.1.4.1.6296.9.11.2.1.1.2
dsEPonSystemPortTable	1.3.6.1.4.1.6296.9.11.2.1.1.2.1		not-accessible	EPON System Port Information.
dsEPonSystemPortEntry	1.3.6.1.4.1.6296.9.11.2.1.1.2.1.1		not-accessible	EPON System Port Information.
DSE dsEPonSystemPortRegMode	1.3.6.1.4.1.6296.9.11.2.1.1.2.1.1.1	DsEPonSystemRegModeType	read-write	The registeration mode of port.
DSE dsEPonSystemPortStatus	1.3.6.1.4.1.6296.9.11.2.1.1.2.1.1.2	DsEPonSystemPortStatusType	read-write	The current status of port.
DSE dsEPonSystemPortRequest	1.3.6.1.4.1.6296.9.11.2.1.1.2.1.1.100	DsEPonSystemPortRequestType	write-only	The user request about port.
dsEPonSystemChannel	1.3.6.1.4.1.6296.9.11.2.1.1.3
dsEPonSystemChannelTable	1.3.6.1.4.1.6296.9.11.2.1.1.3.1		not-accessible	EPON System Channel Information.
dsEPonSystemChannelEntry	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1		not-accessible	EPON System Channel Information.
INT dsEPonSystemChannelNodeIndex	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.1	INTEGER	accessible-for-notify	System Node Index.
INT dsEPonSystemChannelPortIndex	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.2	INTEGER	accessible-for-notify	System port Index.
INT dsEPonSystemChannelId	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.3	INTEGER	read-only	System channel ID (ONU/ONT ID).
INT dsEPonSystemChannelLlid	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.4	INTEGER	read-only	System channel LLID (LLID of ONU/ONT).
IP dsEPonSystemChannelIpAddress	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.5	IpAddress	read-only	The Unique IP address identify channel-unit.
PHY dsEPonSystemChannelMacAddress	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.6	PhysAddress	read-only	The Unique HW address identify channel-unit.
DSE dsEponSystemChannelRegMode	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.7	DsEPonSystemRegModeType	read-write	The registration-mode of channel-unit.
DSE dsEPonSystemChannelStatus	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.8	DsEPonSystemChannelStatusType	read-write	The link status of channel.
DSE dsEPonSystemChannelOpticModule	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.9	DsEPonSystemChannelOpticModuleType	read-only	The module status of the optic module of channel.
I32 dsEPonSystemChannelRtt	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.10	Integer32	read-only	The Round Trip Time of Channel.
STR dsEPonSystemChannelDescription	1.3.6.1.4.1.6296.9.11.2.1.1.3.1.1.11	DisplayString	read-write	The Description of Channel.
dsEPonDeviceStatistics	1.3.6.1.4.1.6296.9.11.2.1.2
dsEPonDeviceStatTable	1.3.6.1.4.1.6296.9.11.2.1.2.1		not-accessible	EPON OLT switch-side traffic statistics.
dsEPonDeviceStatEntry	1.3.6.1.4.1.6296.9.11.2.1.2.1.1		not-accessible	EPON OLT switch-side traffic statistics.
C64 dsEPonDeviceInOctetsEx	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.1	Counter64	read-only	.
C32 dsEPonDeviceInPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.2	Counter32	read-only	.
C32 dsEPonDeviceInPause	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.3	Counter32	read-only	.
C32 dsEPonDeviceInErroredFrame	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.4	Counter32	read-only	.
C32 dsEPonDeviceInUnicastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.5	Counter32	read-only	.
C32 dsEPonDeviceInBroadcastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.6	Counter32	read-only	.
C32 dsEPonDeviceInMulticastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.7	Counter32	read-only	.
C64 dsEPonDeviceOutOctets	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.8	Counter64	read-only	.
C32 dsEPonDeviceOutPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.9	Counter32	read-only	.
C32 dsEPonDeviceOutPause	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.10	Counter32	read-only	.
C32 dsEPonDeviceOutDropped	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.11	Counter32	read-only	.
C32 dsEPonDeviceOutUnicastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.12	Counter32	read-only	.
C32 dsEPonDeviceOutBroadcastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.13	Counter32	read-only	.
C32 dsEPonDeviceOutMulticastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.1.1.14	Counter32	read-only	.
dsEPonDeviceStatPonTable	1.3.6.1.4.1.6296.9.11.2.1.2.2		not-accessible	EPON OLT pon-side traffic statistics.
dsEPonDeviceStatPonEntry	1.3.6.1.4.1.6296.9.11.2.1.2.2.1		not-accessible	EPON OLT pon-side traffic statistics.
C64 dsEPonDeviceStatPonInOctets	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.1	Counter64	read-only	.
C32 dsEPonDeviceStatPonInPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.2	Counter32	read-only	.
C32 dsEPonDeviceStatPonInPause	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.3	Counter32	read-only	.
C32 dsEPonDeviceStatPonInErroredFrame	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.4	Counter32	read-only	.
C32 dsEPonDeviceStatPonInUnicastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.5	Counter32	read-only	.
C32 dsEPonDeviceStatPonInBroadcastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.6	Counter32	read-only	.
C32 dsEPonDeviceStatPonInMulticastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.7	Counter32	read-only	.
C64 dsEPonDeviceStatPonOutOctets	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.8	Counter64	read-only	.
C32 dsEPonDeviceStatPonOutPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.9	Counter32	read-only	.
C32 dsEPonDeviceStatPonOutPause	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.10	Counter32	read-only	.
C32 dsEPonDeviceStatPonOutDropped	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.11	Counter32	read-only	.
C32 dsEPonDeviceStatPonOutUnicastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.12	Counter32	read-only	.
C32 dsEPonDeviceStatPonOutBroadcastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.13	Counter32	read-only	.
C32 dsEPonDeviceStatPonOutMulticastPkts	1.3.6.1.4.1.6296.9.11.2.1.2.2.1.14	Counter32	read-only	.
dsEPonNotification	1.3.6.1.4.1.6296.9.11.2.1.3
NTF dsEPonOnuRegistrationError	1.3.6.1.4.1.6296.9.11.2.1.3.1			.
NTF dsEPonBadEncryptionKey	1.3.6.1.4.1.6296.9.11.2.1.3.2			.
NTF dsEPonLlidMismatch	1.3.6.1.4.1.6296.9.11.2.1.3.3			.
NTF dsEPonTooManyOnuRegistering	1.3.6.1.4.1.6296.9.11.2.1.3.4			.
NTF dsEPonDyingGASP	1.3.6.1.4.1.6296.9.11.2.1.3.5			.
NTF dsEPonOnuRegister	1.3.6.1.4.1.6296.9.11.2.1.3.6			.
NTF dsEPonOnuDeregister	1.3.6.1.4.1.6296.9.11.2.1.3.7			.
NTF dsEPonLastOnuDeregister	1.3.6.1.4.1.6296.9.11.2.1.3.8			.
NTF dsEPonOltCableDown	1.3.6.1.4.1.6296.9.11.2.1.3.9			.
NTF dsEPonOltRecoverCableDown	1.3.6.1.4.1.6296.9.11.2.1.3.10			.
NTF dsEponOnuFristRegisteredOnAutoToManual	1.3.6.1.4.1.6296.9.11.2.1.3.11			.

RFC description

DASAN EPON (Ethernet Passive Optical Network) MIB for managing optical network components and channels.

Start monitoring DASAN EPON OLT/ONU with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download DASAN-EPON-MIB